Repair Maintenance To D S Gate On Kuhudi Poichandia Saline Embankment At Baranga Under Nimapada Irrigation Division
Tender Value
10.24 Lakhs
Estimated cost
Bid Submission
11 Sep 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
NIMAPADA → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair Maintenance To D S Gate On Kuhudi Poichandia Saline Embankment At Baranga Under Nimapada Irrigation Division
BOQ
| Sl. No. | Item Description |
| 1 | Fabrication of embedded parts for one set of vertical gate of size - 2250 x 1550 mm consisting of seal beam, SS seal seat, wall liner, ss trrack plateetc. with supply of276.65 Kg structural steel materialsincluding machinary, fixture, labour, cutting, aligning, welding, cleaning, finishing, including consumeables allcompletewith lead and lift as per specification and directionof Engineer in Charge. |
| 2 | Fabrication of one set of vertical lift sliding gate leaf size 2480 x 1550consisting of skinplate, horizontal girder, end vetical girder, stiffners, seal flats, pad base etc. with supplyof 461.82 kg of structural steel for one set as perspecification, and direction of Engineer-in-charge. |
| 3 | Fabrication of one set of steel hoist bridge for single stem nut type gearbox hoist consisting of supporting beam, corss beam, base plates, chequredplate, anchor bar etc. with supply of 172.17Kg approx. structural steel includingMachinary, fixture, labour, cutting, alligning, welding, cleaning, finishing including consumeables all complete with lead and lift as per specification and direction of Engineer-in-Charge. |
| 4 | Erection, positioning, aligning, fixing, trial & commissioning for set (per kg of total weight of embedded parts, gate leaf, hoist bridge combined together including 100 kg for hoist assembly) of about 1077.33Kg materials as per specification and direction of Engineer-in-Charge. |
| 5 | Painting of all structural componentsexposed portion of one set of embededded parts, gateleaf and hoist bridge assembly about 977.33 Kg including cleaning, degreasing, handling, cost of paint, applying of one coat of zinc primer of40 micron thick and three coats of coal tar epoxypaint of100 micron each, all inclusive of labour, materials and consumeables as perrelevant IS code Specifications, approved drawing with lead and lift. |
| 6 | Watch & Ward at site for10 days in3 shifts |
| 7 | Concrete cutting all inclusive of labour, materials and consumeables as per direction of Engineer-in-Charge |
| 8 | 2nd stage concreting minimum ofM20 gradestandard concrete allinclusive of labour, materials and consumeables as per direction of Engineer-in-Charge |
| 9 | Supply of Construction of coffer dam by sand bag and dismantiling after completion of work cost of labour and sand bag etc. |
| 10 | Dewatering chargesall inclusive of labour, materials and consumeables as per directionof Engineer-in-Charge |
| 11 | Dismantling & scaffolding charges |
| 12 | Supply Bolts, Nut, studs, washers etc. |
| 13 | Supply of LTB-1 Bronze pad. |
| 14 | Supply of Bottom Rubber Seal2.65 mm |
| 15 | Supply of 32 top seal - 2.57 m |
| 16 | Supply of 32 side Seal - 3.41 m |
| 17 | Supply of Anchor Bars |
| 18 | Supply of 63 Screw rod with sq. thread - 2.35 m each set |
| 19 | Supply of Nut type screw Gear box assembly suitablysquare threaded for63 mm dia screw rod all inclusiveof cost of materialcost of Thrust bearing, machining and assembly charges. |
| 20 | Supply of operating handle |
| 21 | Supply of Lifting pin45 x 150 mm 45 C8 IS 1570 Part II |
| 22 | Supply of grease & gear oil |
| 23 | Supply of stainless steel flat. |
| 24 | Supply of stainless steel electrode |
| 25 | Transportation charges with labour charges for loading & unloadingand return of scrap material |
AI Tender Summary
Tender Timeline
Sep 01, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedSep 11, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 13, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender