Public Works Department-PWD has published Construction Of Multipurpose Hall In Govt. Degree College Dharampur Distt. Mandi Site Development, Building Portion With W.S And S.I, Rain Water Harvesting Tank And Septic Tank. Submission Date for this Tender is 23-09-2021. Water Harvesting Tenders in dharampur Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 10-Sep-2021 | date corrigendum | Date | 16-09-2021 |
| 2 | 10-Sep-2021 | sbd | Other | 16-09-2021 |
| 3 | 14-Sep-2021 | date extension corrigendum | Date | 20-09-2021 |
| 4 | 14-Sep-2021 | technical evalution | Technical Bid | 20-09-2021 |
| 5 | 17-Sep-2021 | date corrigendum 2 | Date | 23-09-2021 |
| Sl. No. | Item Description |
| 1 | Excavation in hilly areas in all heights and depths and in all kinds of soil by manual/mechanical means including saturated soil comprising of ordinary soil, soft rocks, hard rocks, chiseling/wedging out of rock (where blasting is prohibited) and other intermediate classification of soil, setting out true to the required lines, grades width cutting and trimming of side slopes and level as shown in the drawing and as directed by the Engineer-in-Charge at site according to the MORD technical specification clause 1603.1, 1603.2 and sorting out useful materials and stacking the same in all leads and lifts in acquired width of the road and transportation of un-useful material for filling in road ways, camber, embankments for grade improvements and disposal of all surplus un-useful material to acquired width of the road or on approved dumping sites through all modes of transportation including head load or animals transport or mechanical means alongwith its leveling fine dressing and carriage of machineries, materials, tools equipments and safety measures and other incidentals necessary to complete the work by mechanical means and/or labour if required.Any loss to the public/private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all cases as per direction of the Engineer-in-Charge including carriage of material within all leads and lifts. The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 2 | Excavation in foundation, trenches etcetera in all classification of soil such as pick work, jumper work, blasting work soft rock and hard rock including chiselling wedging and any other mixed variety in dry or saturated conditions upto any depth and lift including pumping and bailing out water where required including stacking the serviceable and unserviceable materials separately as directed and then returning the stacked soil in fifteen centimeters layers when required into plinth and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus un-serviceable excavated earth within all leads and lifts as perdirected by the Engineer-in-Charge including entire carriage of material with in all leadsand lifts, disposed materials to be neatly dressed and levelled including other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 3 | Providing form work with mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frame of30x30x5mm (Thirty into thirty into five millimetre) size so as to give a fair finish including centring, shuttering, strutting andproppingand centringetc etera with wooden battens and ballies in all heights of propping and centring below supporting floor to ceiling not exceeding 4 (four)meters and removal of the same for insitu-reinforced concreteand plain concrete work upto all floor level in all heights including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 4 | In foundation,footings bases of columns etcetera for mass concrete. |
| 5 | In flat surfaces such as soffits of suspended floors, roofs, landings balconies and access platformand the like floor upto any thickness upto all floor levels. |
| 6 | In beams, cantilevers, girders and lintels, sides and soffits of beams, beams haunchingcantilevers bressumers and lintels in all depth /height not exceeding 1 (one) metre depths upto all floor levels |
| 7 | In columns, pillars,piers, abutmentsposts and struts square rectangular or polygonal in plan upto all floor level. |
| 8 | Stair Casewith sloping orstepped soffits excluding landing except spiral stair upto all floor level. |
| 9 | Vertical surfaces such as walls (any thickness) partition and the like includingattached pillasters, buttresses plinth andstring courses etcetraand the like in all floor heights. |
| 10 | In edges of slabs and breaks in floors and walls under any width/ height upto all floor level. |
| 11 | Providing and layingmechanically mixedcement concrete 1:3:6 (One cement: three sand: sixgraded/crushed stone aggregate 20mm (Twenty millimetre) nominal size as per specificationand curing complete but excluding cost of form work in foundation and plinth including all heights/depths including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 12 | Providing and layingmechanically mixedcement concrete 1:4:8 (One cement: four sand: eight graded/crushed stone aggregate 40mm (Forty millimetre) nominal size) as per specificationand curing complete but excluding cost of form work in foundation and plinth including all heights/depths including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 13 | Providing and laying damp proof course 40mm (Forty milimetres ) thick with cement concrete 1:2:4 ( One cement : two sand : four graded crushed stone agregate 12.5mm ( Twelve decimal five milimetres ) nominal size curing completeincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 14 | Applying a coat of residual petroleum bitumen of grade of VG-10 (ten) of approved quality using 1.7kg (One point seven) Kilogramme per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 15 | Providing and laying in position specified grade ofcement concrete 1:2:4 (onecement : two coarse sand : fourgraded crushed stone aggregate 20 mm (twenty millimetres) nominal size) all work up to plinth level excluding the cost of centering, shuttering,including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 16 | Providing and laying in position specified grade of reinforced cement concrete 1:2:4 (onecement : two coarse sand : fourgraded crushed stone aggregate 20 mm (twenty millimetres) nominal size) all work up to plinth level excluding the cost of centering, shuttering, finishing and reinforcement including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 17 | Providing and laying Reinforced cement concretemachine batched and machine mixed and vibratedin walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.above plinthlevel upto excluding costof centring shuttering finishing and reinforcement1:1.5:3 ( one cement : one and half course sand : three graded crushed stone aggregate 20 mm (twenty millimetres) nominal size) to all floor levelsincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 18 | Providing and laying Reinforced cement concretemachine batched and machine mixed and vibrated in reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° (fifteen) Degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to all floor level, excluding the cost of centering, shuttering, finishing and reinforcement 1:1.5:3 ( one cement : one and half course sand : three graded crushed stone aggregate 20 mm (twenty millimetres) nominal size) including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 19 | Providing, hoisting and fixing above plinth level up to all floorlevel precast reinforced cement concrete in mouldings as in cornices, windows sills etc, including setting in cement mortar 1:3 (1 cement : 3 coarse sand) cost of required centering, shuttering but, excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded crushed stone aggregate 20 mm nominal size). including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive of royality, GSTor other taxes imposed by the Government. |
| 20 | Providing and laying in position machine batched and machine mixed and vibrated design mix M-25(twenty five) grade cement concrete for reinforced cement concrete work,to obtained minium crushing strength of 25N/mm2 (Twenty five ) Netwon per millimetres square) with minium cement contents of 425Kg/Cum (Four hundredtwenty fivekillogramme per Cubic metres)using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-chargein all heights/ depthincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 21 | All works upto plinth level. |
| 22 | All works above plinth level upto allfloorlevel. |
| 23 | Providing and laying Mild steel and Medium Tensile steel bars Fe 500Dmade ofSAIL,TISCO, TATA, JINDAL, RINL, PANTHER & (JSPL) Shyam steel for reinforcedcement concrete work including straightening, cutting, bending, placing in position and binding allcomplete uptoplinth levelincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 24 | Providing and laying Fe 5000 Thermo mechanically treated bars of grade moremade ofSAIL,TISCO, TATA, JINDAL, RINL, PANTHER & (JSPL) Shyam steel for reinforcedcement concrete work including straightening, cutting, bending, placing in position and binding allcomplete upto plinth level including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 25 | Providing and laying Mild steel and Medium Tensile steel bars Fe 500Dmade ofSAIL,TISCO, TATA, JINDAL, RINL, PANTHER & (JSPL) Shyam steel for reinforcedcement concrete work including straightening, cutting, bending, placing in position and binding allcomplete aboveplinth level upto all floor levelsincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 26 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5( seven point five) in foundation andplinth level in cement mortar 1:6 (onecement : six sand) curing complete including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 27 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5( seven point five)in superstructure above plinth level upto all floor level in all shapes and sizein cement mortar 1:6 (onecement : six coarse sand) curing complete including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 28 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five)in foundation and plinth inCement Mortar 1:3( One cement: three course sand)and curing completeincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 29 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five)in superstructure above plinth level up to all floor levelsinCement Mortar 1:3( One cement: three coursesand)and curing completeincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 30 | Random rubble masonrywith hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (one cement : six coarse sand : twelve graded crushed stone aggregate 20 mm ( twenty millimetre) nominal size upto plinth level with cement mortar (1:6) (One cement : six course sand)including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 31 | Stone filling /Solingunder floors tightlyhand packedupto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 32 | Filling with brick agreegate in soak pit complete consolidating and dressing completeincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 33 | Providing and fixing 20mm (Twenty millimetre) nominal dia chromium plated brass curtain rod having wall thickness of 1.25mm (One point two five) millimetres with two chromium plated brass brackets fixed with C.P. Brass screws and PVC sleeves etc., upto all floor levels including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 34 | Providing and fixing 300×16mm (Three hundred into sixteen millimetre) nominal sizeaaluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10(ten) as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.TThe rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 35 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10(ten) as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. completeupto all floor levelsincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 36 | 250x10mm (Two hundred fifty into ten millimetres) |
| 37 | 150x10mm (onehundred fifty into ten millimetres) |
| 38 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868) transparent or dyed to required colour or shade, withnecessary screws etc completeupto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 39 | 125mm (one hundred twenty five millimetres) |
| 40 | 100 mm (one hundred millimetres) |
| 41 | Providing and fixing 100 mm (hundred millimetre) bright finished drawn hooks and eye including entire carriage of materials upto all leads and lifts. The rates are inclusive ofroyality,GSTor other taxes imposed by the Government |
| 42 | Providing and fixing aluminiumactingfloor door stopper ISI marked (anodic coating not less thangrade AC10 (ten) as per IS:1868) transparentand dyed to required colour and shadewith necessary screws etc. complete upto all floor level including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 43 | Providing and fixing 150 mm( one hundred fifty millimetres ) oxidized M.S. double acting spring hinges with necessary screws etc. complete upto all floor levels including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 44 | Providing and fixing 19(Ninteen) millimetres thicktermite resistant water proof Commercial Board shutters with hard wood edging andconfirming to IS- No.1659 ofNOVAPAN , ARCHIDPLY, ACTION TESA,GREEN,NATIONAL,KITPLY make shuttersi/c fixing with nickel plated piano hinges with screws etc and PGI sheet linning inside completeupto all floor levelsincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 45 | Providing and fixing ISI marked 35 mm (thirty five millimetre) thickstainless steel butt hinges with necessary screws flush door shutters conforming to IS : 2202(Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.. |
| 46 | Providing and fixing factory made 30 mm thick Non decorative finish door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm, painted with primer , all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8 mm complete as per manufacturer"s specifications and direction of Engineer-in-charge including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment... |
| 47 | Providing and fixing 8mm (eight milimetre) thick cement bounded particle board ceiling of approved quality (frame work and cover fillets to be paid for separately.) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. . |
| 48 | Providing and fixing 6mm thick (six milimetre) cement bounded particle board ceiling of approved quality (frame work and cover fillets to be paid for separately.) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. . |
| 49 | Structural steel work riveted, bolted or welded in built up sections,, made of Tata, Jindal, trusses andtrussed, in purlins in buildingframed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 50 | Steel work welded in built up sections,, made of Tata, Jindal,framed work including cutting hoisting, fixing in position using structural steel etc. as required In Grating frames, guard bar, ladder railing, brackets, gates and similar work. and applying a priming coat of approved steel primer all complete.including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 51 | Providing and fixing M.S. fan clamp type I or II of 16 mm ( One or twoofsixteen) millimetres dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design completeincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 52 | Providing and fixing(SINGLE REBATE DOOR FRAME) door frame fabricated from sections roll formed out of 1.2 mm (one point two millimetre) thick galvanized steel (Base steel as per IS 513) with zinc of 120 gms/sqm (one hundred twenty gram per square metre). The overall size of section should be 80x50 mm (eighty into fifty millimetre) and 105x60 mm (one hundred five into sixty millimetre) with rebate of 37 mm (thirty seven millimetre) for shutter. The frame section should be cut to length and metre joint with corner bracket made of CRCA electroplated. The frame should be provided with 3 number of M.S. powder coated 4" (four inch) butt hinges of 2 mm thickness welded to frame and 6 number of 1.2 mm thick CRCA electroplated stiffeners should be welded to frame and 6 number 8" (eight inch) MS holdfasts with spilt end tail welded to stiffeners plates and 1 number aldrop receiver. Each frame should be provided with 25x50 mm tie rod at bottom. All welded places should be treated with protective coat of zinc rich primer. The entire frame should be provided with a coat each primer complete and carriage of material within all leads, lift and otheer incidental chaarges complete in all respects as per direction and satisfaction of Engineer-in-Charge. The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 53 | Providing and fixing (Double rebate Door frame) door frame fabricated from section roll formed out of 1.20 mm (One point two zero millimetre thick ) galvanized steel (base steel as per IS 513) with zinc of 120 (One Twenty) gram per square metre. The over all size of section should be125x60 mm (one hundred twenty five into sixty millimetere) and 125x60mm(one hundred twenty five into sixty millimetere) with rebeate of 37 mm (Thirty seven millimetre) for shutter. the frame section should be cut to length and metre joint with corner bracket made of CRCA electroplated. the frame should be provided with 3 (Three)number of M.S power coated 4" (four inch)but hirges of 2mm( two millimetre) thickness weeded to frame and 6 (Sex) number of 1.20mm (one point twenty millimetre) thick CRCA electroplated stiffeners should be welded to frame and 6 (six) number 8" (Eight inch) M.S. hold fast with spilt end tail welded to frame should be provided with a coat earth primer complete and carriage of material upto all leads and lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer -in- Charge.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 54 | Providing and fixing ECO-5000 Series Windows fabricated from roll formed sections made of Galvanized steel colour coated / powder coated (Base steel as per 513"D" quality Galvanized as per IS 277 with Zinc of 120 gram/sqm( one hundred twenty gram per square metre) with total coated thickness of 0.60mm. Coated section should be with primer coat of epoxy primr of 5-7 micron thick finish apinted with polyster paint of 12-16 microns thick and black coated with alkyd backer of 5-7 microns, or powder coated with pure polyster powder up to 50-60 micron thick. Section for frame should be of 98x50mm, section for mullion should be of 46mmx70mm 0.58mm thickness, section for shutter frame should be of 46mmx46mmx0.58mm, section for fixed glass beed should be of 18mmx25mmx0.58mm and section for fly mesh shutter frame should be 20mm x 40mmx0.58mm. Frames and mesh shutter section 18mmx6mmx0.58mm should be cut to length and mitre joint with corner bracket made of polypropylene. Glass shutter should be mitre joint with corner bracket made of CRCA electroplated. Mullion section should be jointed with frame/mullion using nylon. Mullion cap Ethyl Propylene Diamine Monomer(EPDM) gasket should be used all arround glass in shutter between frame and glazed shutter and both sides of fixed glass. Rubber gasket should be used around fly mesh to fix mesh in mesh shutter. Each glazed shutter should be provided with MS powder coated friction hinges 1 set, High grade aluminium coated handles 1 number. Each mesh shutter should be provided with S.S. Pivot hinges 1 set. Sec-color make handle shall be provided per shutter. Window frame should be fixed to brick/concrete masonary by using nylon self-expanding caps and driving MS electroplated 80mm long screw into the caps through frames complete and carriage of material withinn all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge. The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 55 | Providing and fixing ECO-5000 Series Windows Glass shutter and fixed glass portions should be provided with a glass of 4 mm plain float glass complete and carriage of material within all leads, lifts and other incidental charges complete in all respects as per direction and satisfaction of Engineer-in-Charge.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 56 | Providing and fixing ECO-5000 Series Windows mesh shuter should be provided with a stainless steel 32 gauge fly mesh of 304 grades with 144 holes per square inch complete and carriage of material within all leads, lifts and other incidental charges complete in all respect as per the direction and satisfaction of Engineer-in-Charge.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 57 | Providing and fixing ECO-5000 Series Windows grill should be provided with grill made of 10 mm (ten millimetre) square MS bars welded to at 150 mm ( one hundred fifty millimetre) centre to centre6 mmx12 mm(six millimetre into twelve millimetre ) MS flat. Total grill unit should be powder coated and fixedto window frame with screws complete and carriage of materials within all leads, lifts and other incidental charges complete in all respect as per the direction and satisfaction of Engineer-in-Charge.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 58 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregatecomplete and carriage of material within all leads, lifts and other incidental charges complete in all respects as per direction and satisfaction of Engineer-in-Charge. |
| 59 | Providing and laying full body vitrified floor tilesof size 600 x600 mm (Six hundred into six hundred )millimetresin matt finishedwith water absorption less than 0.08% and conforming to IS: 15622, of approved make of Kajaria , Nitco,Somany,Orient,Rak, Johnson and Johnsonin all colours and shades, laid on 20mm thick cement mortar 1:4 ( One cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm(three point three kilogramme per square metres) including grouting the joints with white cement and matching pigments etc., complete upto all floor level in all heights including entire carriage of material with in all leads liftsand technical specifications as per thedirection of Engineer-in-Charge including other incidentals. he rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 60 | Providing and layingfull body Vitrified tiles of size 600 x600 mm (Six hundred into six hundred )millimetresin matt finished with water absorption less than 0.08% (zreo point zero eight percent) and conforming to IS: 15622, of approved brand & manufacturer Kajaria , Nitco,Somany,Orient,Rak, Johnson and Johnson , in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477,oer 12mm (twelve ) millimetres thick bed of cement mortor of 1:3(one cement: Three sand) , jointing with grey cenent slurry @ 3.3 kg/ sqm(three point three kilogramme per square metres) including grouting the joints with white cement and matching pigments etc., complete upto all floor level in all heights including entire carriage of material with in all leads liftsand technical specifications as per thedirection of Engineer-in-Charge including other incidentals. The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 61 | Providing and laying 10mm (ten millimetres) Thick Digital ( Antiskid) 400 x 400 mm( four hundred into four hundred millimetres)ceramic tile of sizemake of Kajaria, NITCO, Somany, Orient, RAK, Johnson & Johnsongrade IV of same shade of flooring approved shade tile in any ahade and colour in skirting, riser of steps and dado laid over 20 mm (twenty millimetre) thick cement mortar 1:3 (one cement : three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as requiredupto all floor level in all heights including entire carriage of material with in all leads liftsand technical specifications as per thedirection of Engineer-in-Charge including other incidentals. The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 62 | Providing and laying 10mm (ten millimetres) Thick Digital ( Antiskid ceramic tile of size 300x450mm(three hundred into four hundred fifty millimetres) make of Kajaria, NITCO, Somany, Orient, RAK, Johnson & Johnsongrade IV of same shade of flooring approved shade tile in any ahade and colour in skirting,Riser of steps and dadolaid over 12mm(twelve millimetre) thick cement mortar 1:3 (one cement : three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as requiredupto all floor level in all heights including entire carriage of material with in all leads liftsand technical specifications as per thedirection of Engineer-in-Charge including other incidentals. The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 63 | Providing and laying 10mm (ten millimetres) Thick ceramic tile of size 300x600mm(three hundred into six hundred millimetres) make of Kajaria, NITCO, Somany, Orient, RAK, Johnson & Johnsongrade IV of same shade of flooring approved shade tile in any ahade and colour in skirting, riser of steps and dado laid over 12 mm(twelve millimetre) thick cement mortar 1:3 (one cement : three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as requiredupto all floor level in all heights including entire carriage of material with in all leads liftsand technical specifications as per thedirection of Engineer-in-Charge including other incidentals. The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 64 | Marble stone flooring with 18mm ( Eighteen Millimetre) thick Marble with semi round nosing stone, as per sample of marble approved by Engineer-in-charge,over 20 mm (twenty millimetre )(average) thick base of cement mortar 1:4(1 cement : 4 coarse sand) laid and jointed with greycement slurry, including rubbing and polishing complete with : Makrana white second quality with semi round nosing complete upto all floor level including entire carriage of material with in all leads lifts . The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 65 | P/F wooden planking flooring (50mm thick over 50x50cm angle iron frame work bracing as per load condition with top surface of wooden plank having tongue groove joints including fixing with iron screws complete with 1st class teak wood (angle frame measured and paid sepretaly) including entire carriage of material with in all leads liftsand technical specifications as per thedirection of Engineer-in-Charge including other incidentals. The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 66 | Providing and fixing WI-Paraquit or action tesa clip in preliminated wooden flooring (H.D.F.) with poly sheet & thermocoal sheet with door profile and side moulding locks with all fittings etc. complete including entire carriage of material with in all leads liftsand technical specifications as per thedirection of Engineer-in-Charge including other incidentals. The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 67 | Providing and laying 6.5mm( six point five millimetre) thick multilayerd vinyal flooring with compect closed cell foam backing, glass fible reinforcement and vinyal performance layer flooring of approved shade of LG Hausys/ polaris/its equiv complete as per the direction of Engineer-in-charge. and HPPWD Specification including entire carriage of material with in all leads lifts. The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 68 | Providing and laying 6.5mm thick multilayerd vinyal flooring in skriting with compect closed cell foam backing, glass fible reinforcement and vinyal performance layer flooring of approved shade of LG Hausys/ polaris/its equivalent complete as per the direction of Engineer-in-charge. and HPPWD Specification including entire carriage of material with in all leads lifts. The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 69 | Red manadana Stone flooring over 19mm (average) thick 60x60( sixtyinto sixty )base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1:4 (1cement : 4 coarse sand): 19 mm ( Ninteen millimetre) thick including entire carriage of material with in all leads liftsand technical specifications as per thedirection of Engineer-in-Charge including other incidentals. he rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 70 | Providing and fixing wall paneling of 12mm ( twelve millimetre)thick pre liminated particle board (one side) of approved brandmake of Novapan, Kitply, National,Archidply, Action Tesa Green of soft wood 4x4 cm ( four into four centimetre) frames @ 60 cm(Sixtycentimetre) centre to centre on both side fixing with robber plugs wide and 12mm (twelvemillimetre) deep groves of required pattern of 25x12mm/ (twenty fiveinto twelve millimetre) cornish out of 75x60mm (seventy five into sixty millimetre) of different pattern in top middle and corner joints including polishing and painting groves complete. 1st class Indian teak wood including entire carriage of material with in all leads liftsand technical specifications as per thedirection of Engineer-in-Charge including other incidentals. The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 71 | Wooden slats of approved shade 2440mmx128mmx16mm made MDF backed with acoustical fleece to be installed with 15mm GI and Lock in Clips on the back of tongue and groove system to be installed with 2400x50mm web flenges 15 and 50mm fully with backing of 50mm thick absorb wool/insulation knurled hot depped galavanised steel with 120GSM Zink coating ot Prolad/ Himalayan/ Armstrong,including entire carriage of material with in all leads liftsand technical specifications as per thedirection of Engineer-in-Charge including other incidentals. The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 72 | Fabric Acoustical Panels in combination with wood fiber cement composite slats 20mm thick with colours of approved shade size 2400x50mm web Flenges 15mm and 50mm fully with backing of 50mm thick absorb wool/ insulation above of Himalayan/ Prolad/ Armstron or its equivlent.including entire carriage of material with in all leads liftsand technical specifications as per thedirection of Engineer-in-Charge including other incidentals. The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 73 | Providing and fixing single piece full body vitrified antiskid pattern tilesin matt finishedwith water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete including entire carriage of materials upto all leads and lifts The rates are inclusive ofroyality,GSTor other taxes imposed by the Government.. |
| 74 | Providing and Fixing 75x75mm teak wood decorative wooden balustar of approved sample to hand rails and treeds or strings complete in 2nd class indian teak wood.including entire carriage of material with in all leads liftsand technical specifications as per thedirection of Engineer-in-Charge including other incidentals. The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 75 | Providing and fixing Exterior Grade MDF slats made from acoustical fibre board (of density 750-800kg/m3) with linear perforation backed with acoustical fleece to achieve 0.88 NRC to be installed in toungue & groove pattern over aluminium or G.I. frame work with G.I. lock in clips with combination of wood fibre cement composites tiles 15mm with colours of approved shade of size 595x595mm noise absorption 0.85NRC to be installed on to 24 Grid system of Himalayan Acoustics/Dexune or its equivalent (False ceiling material shall be non combustible fire retardent & confirm to Bs:476 & Astmd 635-1991 & IS 15061-2002. as per the direction of Engineer-in-charge and HPPWD Specification including entire carriage of materials upto all leads and lifts The rates are inclusive ofroyality,GSTor other taxes imposed by the Government.. |
| 76 | Providing and fixing tiled plaincelling of specified materials ans size 595x595 mm ( five hundred ninety fiveinto five hundred ninety five millimetre ) in true horizental level suspended on inter locking metal gride of hot diipped galvaized steel section galvaized @120 (one hundred twenty)gram per square metre both side inclusive) consisting of main "T" runner with suitable spaced joints to get required length and off size 24x38mm ( twenty four into thirty eight millimetre ) made 120 m 0.30mm (one hundred twenty metre zero point thirty ) thick (minimum) steel spaced at 1200 mm(one thousand two hundredmillimetre)center to center and cross "T" of size 24x25 mm( twenty four into twenty five )made of 0.30mm thick (minimum) sheet 1200 mm (one thousand twohundred millimetre) longspeced between main "T" at 600 mm center to center to from a gride of 1200x600mm ( one thousand two hundred into six hundred millimetre) andsecondary cross "T" of length 600mm ( Six hundred millimetre) and size 24x25 mm( twenty four into twenty fivemillimetre) made 10.30mm(ten point three zero millimetre thick (minimum) sheet to be interlocked at middle of the 1200 x 600 mm (one thousand two hundred into six hundred millimetre ) panel to form grids of 600 x 600 mm (six hundred into six hundredmillimetre ) and wall angle of size 24x24x0.3mm (twenty four into twenty four into zero point thirty millimetre ) and laping false ceilling tiles of approved texture in the grid including of required cutting/making openig gor services like diffusors grills light fittings fixtures. smoke detectors etc. Main "T" runners to be suspended from ceiling using G..I slotted clents of size 27x37x25x1.6mm (twenty seven into thirty seven into twenty fiveinto one point six millimetre) fixed to ceilling with 12.5 mm (twelve point five millimetre) dia and 50mm long dash fasteners 4mm GI adjustable rods with galvanised butterfully level clips of size 85x30x0.80 mm(eighty five into thirty into zero point eighty millimetre) spaced at 1200mm ( one thousand two hundred millimetre) center to center along main "T" bottam exposed width of 24mm ( twenty four millimetre) of all T-sections shall be prepainted with polyestor paint all complete for all heights as per specification, drawings and as directed by Engineer-in-charges. |
| 77 | Providing and fixing wind ties of 40x6mm flat iron section including entire carriage of material with in all leads liftsand technical specifications as per thedirection of Engineer-in-Charge including other incidentals. The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 78 | Providing and fixing prepainted sandwich made of tata dura shine puffed roofing with top skin of 0.60 (Zero point six zero) millimetres thick prepainted steel sheet over steel trusses made of cold rolled steel coil having a puff depth of 50(Fifty) millimetresrock wool and interior skin of 0.50 ( Zero point five zero) millimetresprepainted steel sheet steel frames are to be painted of approved shade i/c fixing with screws prepainted iron J or L hooks, bolts and nuts with prepainted limpet and rubber washers complete with all accesories as required as per the specification and direction of Engineer-in charge upto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 79 | Providing and fixing ridges or hips 60(sixty)centimetresoverall with prepainted sandwich made of tata dura shine puffed roofing with top skin of 0.60 (zero point sixty) millmetres thick prepainted steel sheet over steel trusses made of cold rolled steel coil having a puff depth 60 (sixty) millmetresrock wool and interior skin of 0.50(Zero point five zero) prepainted steel sheet steel frames are to be painted of approved shade i/c fixing with prepainted iron J or L hooks, bolts and nuts with prepainted limpet and rubber washers complete with all accesories as requiredupto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 80 | Providing and fixing valley 90(Ninety)centimetres overall with prepainted sandwich made of tata dura shine puffed roofing with top skin of 0.60 (zero point sixty) millimtresthick prepainted steel sheet over steel trusses made of cold rolled steel coil having a puff depth 50 (fifty)millimetresrock wool and interior skin of 0.50( Zero point five zero)millimetres prepainted steel sheet steel frames are to be painted of approved shade i/c fixing with prepainted iron J or L hooks, bolts and nuts with prepainted limpet and rubber washers complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 81 | Providing and fixing flushing 38cm(Thirty eightcentimeter) overall with 0.60mm ( Zero point six milimetre)thick pre painted sheet made of tata durashine in roofing with hot dipped metallic Zinc coated sheet with top coat of regular modified polyester organic coating of 20 microns over 5 (Five) microns primer coating + back coat of polyster of 5 (Five) microns over 5(Five) microns primer coating i/c fixing with pre painted J or L hooks, bolts and nuts 6(Six milimetre) dia meter & pre painted G.I. limpet & bitumen washers complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 82 | Providing and fixing MS BP Sheet 1.66 to 2.00 (One point six six to two ) millimetres thick of TATA Dura shine make in eaves board/ facia/ soffits/ ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete upto all heights as per direction of Engineer in Charge ( base members of steel work shall be measured and paid separtely ) upto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 83 | Providing and fixing 30(Thirty) Centimetres wide and 45 (forty five) Centimetresdeep minimium semicircular0.80(Zero point eighty)millimetresthickplain G.I. sheet Tata make with zink coating not less than 275(two hundred seventy five)gm/square metresgutterwith iron brackets 40x3mm (forty into three millimetres) size bolts and nuts and washers etc. including making necessary connections with rain water pipe complete as per designupto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 84 | Providing and fixing P.G.I. Sheet bend of required degree (0.63mm thick sheet) for rain water pipeincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 85 | Glazing with glass panes of 5.50mm thickness (weight not less than 13.75 kg/sqm.)including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 86 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm (fifteen centimetre) diameter and weighing not less than 440 grams (four hundred forty gramme) .including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. . |
| 87 | Providing and fixing 110 mm (one hundred ten milimetre) on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A,finlox make including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten milimetre) gap for thermal expansion, (i) Single socketed pipes.including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. . |
| 88 | Providing and fixingon wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A,Finolax makeincluding jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten milimetre) gap for thermal expansion. |
| 89 | Coulper 110mm ( One hundred ten millimetre) |
| 90 | 110 mm( one hundred ten millimetre) plain bend |
| 91 | 110 x110 x110 mm( one hundred ten intoone hundred teninto one hundred ten )single tee with door |
| 92 | 110mm dia P.V.C. shoe |
| 93 | Providing and fixing unplasticised -PVC pipe clips Finolax make of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm (fifty into fifty into fifty milimetre)hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (one cement : four coarse sand) and making good the wall etc. complete. 110 mm (one hundred ten) dia including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 94 | P/F 1st quality GRC/Unistone wall cladding conforming to IS:15622 (thickness to be specified by the manufacture) of approved make in all colours shades except burgundy, bottle green black of any size as approved by Engineer-in-charge. In skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 and jointing with grey cement slurry @ 3.3 kg per sqm. including pointing in white cement mixed with pigment of matching shade complete including entire carriage of material with in all leads and lifts.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. . |
| 95 | 15 mm (fifteen milimetre) cement plaster on the fair side of single or half brick wall of mix 1:6 (one cement : six fine sand) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 96 | 15 mm (fifteen milimetre) cement plaster on the rough side of single or half brick wall of mix 1:6 (one cement : six fine sand) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 97 | 15 mm (fifteen milimetre) cement plaster on the rough side of single or half brick wall of mix 1:3 (one cement : three fine sand) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 98 | 6 mm (six milimetre)cement plaster of mix: 1:3 (one cement : three fine sand) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 99 | Finishing walls with 100% (one hundred precent)Premium acrylic emulsion paintICI Dulux Gloss, Nerolac, Berger ( Luxol high gloss) Asian Paint Premium Apcolite Gloss) Shalimarmake having VOC less than 50 gm/litre (fifty gramme per litter)and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives (New work (Two or more coats applied @ 1.43 litre/ 10 sqm. (one point forty three liter per ten square metre)over and incouding priming coat of exterior primer applied @ 0.90 litre/ 10 sqm.(zero point ninty liter per ten square metre)including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 100 | Wall painting with acrylic emulsion paint of approved brandICI Dulux Gloss, Nerolac, Berger ( Luxol high gloss) Asian Paint Premium Apcolite Gloss) Shalimarmakeand manufacture to give an even shade : Two or more coats on new work including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 101 | Distempering two or more coats over and including water thinnable priming coat with cement primer with distemperoil bondwashablewith 1st quality acrylic distemper (ready mixed)of approved brand and manufacture to give an even shade having VOC content less than 50 gms/litre (fifty gramm per liters),Nerolac , Berger (Bison Acrylic) Asian Paints (Tractor, Acrylic), Shalimarof approved manufacturer, of required shade and colour complete, as per manufacturer’s specification. of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification on new concrete /masonry/plastered surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter and sand papering the surface smooth complete as requiredupto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 102 | Providing and applying white cement based putty of average thickness 1 mm, of approved brandBirla white, Putty/ J.K. wall puttyand manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.after thoroughly brushing the surface free from mortar droops, dust, loose materials and other foreign mattersand papered smoothto give final matterfinish to the surface complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 103 | Painting with oil type wood presservative of approved brand and manufacture: (Old work (one or more coats) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 104 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm. Over an under coat of primer applied @ 0.75 ltr/ 10 sqm. Of approved brand and manufacture ICI Nerolac, Berger, Asian Paint, Shalimar Make including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 105 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm (zero point ninty liter per ten square metre) over an under coat of primer applied @ 0.80 ltr/ 10 sqm (zero point eighty liter per ten square metre) of approved brand and manufacture ICI Nerolac, Berger, Asian Paint, Shalimar Make including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 106 | Providing and fixing angle iron door frame manufacturemade of San Harvic, Steelman Industries, PD Industries, Metal Windows, Chandni Industries, Ganpati Udyog (Rajpura) manufactured from M.S.Angle iron section 25X25X5mm(Twentyfive into Twentyfiveintofive ) millimetres thickness including hinges jamb,lock jamb,beed and if required angle thrashold of mild steel angle 25X25 mm(Twentyfive into Twentyfive) millimetreswelded or rigidly fixed by mechanical means,lugs with split endtailsto each jamb including steel butt hinges 2.5 mm(Two point five ) millimetres thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surfacecompleteupto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 107 | Providing and fixing 75mm x 60mm(fifty five into sixty) Millimetres rounded hand rail in 1st class Indian teak wood straight length complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 108 | Providing and fixing stainless steel knock down railing of kich AISI 316 of 38mm. Dia handrail fixed on 10x50mm S.S. flat baluster (Design code DT53-2-163) placed at 1200 C/C along with 3 Nos @ 16 mm Mid rails connected at the side of baluster with fixtures the balustrade would be fixed on to floor with casted base plate of minimum 6mm thickness base plate shall be concealed with suitable S.S. 316 grade cover cape railing height to be taken @ 85mm from floor level including entire carriage of materialupto all leads and liftsThe rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 109 | Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Chargeincluding entire carriage of materialupto all leads and liftsThe rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 110 | Providing and laying water proofing treatment, by applying cement slurry mixed with water proofing cement compound of Dr.Fixit Padfin or equivalent consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm. (zero point four hundred eighty eight kilograme per square metre) Mixed with water proofing cement compound @ 0.253 kg/sqm.(zero point two hundred fifty three kilograme per square metre) This layer will be allowed to air cure for 4 hour. (b) Second layer of slurry of cement @ 0.242 kg/sqm(zero point two hundred forty two kilograme per square metre) mixed with water proofing cement compound @ 0.126 kg/sqm (zero point one hundred twenty six kilograme per square metre).This layer will be allowed to air cure for 4 hours (four hours) followed with water curing for 48 hours. (forty eight hours) The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 111 | Providingunder layer for plinth protection of 75 mm(Seventy five millimeters) thick (unconsolidated) bed dry brick/stone aggregate 40mm (Forty millimeters) nominal size with well rammed and consolidated and grouted with finesand including preparation of ground complete in all respect in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 112 | Making plinth protection 50mm (fifty millimeter) thick in cement concrete 1:3:6 (one cement : threecourse sand (zone - III): six graded crushed stone aggregate 20mm (twenty millimeter) nominal size) over 75 mm(seventy five millimetres) thick bed of dry brick bllast 40 mm(forty millimetres)nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling and derssing and finishing the top smooth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 113 | Constructing Coursed rubble hammer dressed "U" shape open surface drain with side wall. 15 X 23 cm (Fifteen into twenty three centimeter )in cement mortar 1:6 ( OneCement : Six approved Sand) and inside plastering with cement mortar 1:3 (OneCement:Three approved Sand) including earth work and laying 10 cm(Ten Centimatre ) cement concrete in 1:5:10 (OneCement : Fiveapproved Sand : Tengradedcrushed stone aggregate) of 40 mm (Forty millimetres)nominal size and7.5 cm (seven Point Five Centimatre )cement concrete 1:2:4 (OneCement : Twoapproved Sand : Fourgradedcrushed stone aggregate of 20 mm (Twenty millimetre) nominal size) and finished with afloating coat of neat cementcomplete as per standard design.including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 114 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. of B.S.T/ JINDAL(HISAR)/ TATA STEEL TUBE LTD /PRAKASH SURYA tube and fittings upto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 115 | 20mm (Twenty ) millimetresnominal bore |
| 116 | 32mm (Thirty two) millimetresnominal bore |
| 117 | 15mm ( Fifteen ) millimetresnominal bore |
| 118 | Providing and laying Making connection of galvanised steel distribution branch with galvanised mild steel main 25mm to 40mm (twenty five to forty) millimetresnominal bore byproviding and fixing tee including cutting and threading the pipe complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.. |
| 119 | Fixing water meter and stop cock in G.I. pipe line of KINGSTON /PARKO / TECHNO JALJAQUAR / GE M/ ESS ESS / SEIKO makeincluding cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately).upto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.. |
| 120 | Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipesmake of Kitech conforming to IS - 15450,U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, (eighty degree centigrate)including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 mtr(one point zero zero metre) spacing. This includes the costs of cutting chases and including testing of joints complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.. |
| 121 | 2532(32 mm OD) (two thousand five hundred thirty two( Thirty two millimertes outer dia)pipe |
| 122 | 2025(25 mm OD) (two thousand twenty five( Twenty five millimertes outer dia)pipe |
| 123 | 1620(20 mm OD) (one thousand six hundred twenty( Twenty millimertes outer dia)pipe |
| 124 | 1216(16 mm OD) (One thousand two hundredsixteen)( sixteen millimertes outer dia)pipe |
| 125 | Providing and fixingWhite Vitreous china Orissa pattern W.C. pan of size 580x440 mm (five hundred eighty into four hundred forty millimetrers) with integral type foot rests water closet squatting pan (Indian type W.C. pan ) of Parryware, Hindware Sanitaryware, Neycer, Cera.make with 100 mm (one hundred millimetrers)sand cast Iron P or S trap, 10(ten) Litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors whereverequired upto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 126 | Providing and fixing white vitreous china pedestal type water closet (European type) No.20011 with seat and lid, 10 (ten) litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm (forty millimetres) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required WC pans with ISI Marked white solid plastic seat and lidofParryware, Hindware Sanitaryware, Neycer, Cera.makeupto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 127 | Providing and fixing 630mmx450mm (six hundred thirty into four hundred fifty millimetres) vitreous china wash basin with pair of 15 mm ( fifteen ) millimetreC.P. brass pillar tap 32 mm ( thirty two millimetre) C.P. brass make ofstandard pattern cutting and making good of the wall where ever requirewith CIofHindware/Parryware /CERA, Sanitary ware, Naycer makeincluding entire carriage of material with in all leadsand lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 128 | Providing and fixing range of three squatting plates with10 litre (ten litre) P.V.C. automatic flushing cistern one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.. |
| 129 | Providing and fixingwhite glazed fire claykitchen sinksize 600 x450x250ofAMC, UNIK, DIAMOND, Neelkanth. make including painting of fittings and brackets, cutting and making good the walls wherever requiredupto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 130 | Providing and fixing draining board with C.I. brackets including painting of brackets, cutting and making good the walls wherever required :White glazed fire clay draining board of size 600x450x 25 mm (six hundred into four hundred fifity into twanty five milimetre) including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.. |
| 131 | Providing and fixing 40 mm (forty milimetre) dia P.V.C. waste pipeFinolax make for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.. |
| 132 | Providing and fixing 600mmx450mm (Six hundred into four hundred fifty millimetres) bevelled edge mirror Atul, Modi Guard ( Golden fish ) make of superior glass of approved qualitywith 6 mm (Six milliters) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers completeupto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 133 | Providing and fixing C.P. brass long nose bib cock Cat no.CON 107KNofJaquar JAL, ESS ESS.Kingston,Gem,Parko,Techno,Seiko make single controlof approved quality conforming to IS standards. 15 mm (fifteen millimetres) nominal bore upto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 134 | Providing and Fixing Angular stop cock with wall flange of opel primeno. CON 150083KNStop Cock ofJaquar JAL, ESS ESS.Kingston,Gem,Parko,Techno,Seiko makecomplete in all respect upto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 135 | Providing and Fixing Concealed stop cock with wall flange of opel primeno. CON 083FTKStop Cock PM ofJaquar JAL, ESS ESS.Kingston,Gem,Parko,Techno,Seiko makesingle control of jaquar or equavalent complete in all respect upto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 136 | Providing and Fixing Angular stop cockwith wall flange of opel primeno. CON 053KN of ofJaquar JAL, ESS ESS.Kingston,Gem,Parko,Techno,Seiko makesingle control complete in all respect upto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 137 | Providing and fixing C.P.Mixer for kitchen sink with casted swinging CON 309KN jaquar or equavalent complete In all respect including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 138 | Providing and Fixing Soap dish recessed type stainless steel AHS-1531of Jaquar or equivalentcomplete in all respectupto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 139 | Providing and Fixing Soap dish stainless steel CAN -1131N of Jaquar or equivalentcomplete in all respectupto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 140 | Providing and fixing Towel Rack with lower hangerNo. AHS-1581H of hotelier series of JAQUAR, or equivalentof superior qualityupto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 141 | Providing and fixing Corner glass self with bract No.ACN-1173 of hotelier series of JAQUAR, ESS-ESSof superior quality upto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 142 | Providing and fixingGlass shelf550 mm (five hundred fifty millimetres) long with C.P. Brass bracket and guard rail no. AQN-7771 of Jaquarfixed with C.P. Brass screws etc complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 143 | Providing and fixing U shaped wall mounted rail with hings 600x 100 mm ( Six hundred intoone hundred millimetre )Cat No. B2210107 and wall mounted grab bar 600 mm ( six hundred millimetre) long CAT No. B2210106 jaguar or equivalent superior quality complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 144 | Providing and fixing 8 mm(eight millimetres) dia C.P. / S.S. Jet with flexible tube upto 1.00( one point zero zero) metre long with S.S. triangular plate to Eureopean type W.C. of Kingston, Gem, Parko, Techno, JAL, ESS ESS. JAQUAR, Seiko. quality and make upto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 145 | Providing and fixing gun metal gate valve with C.I. Wheel of approved quality (screwed end) of Unik, KS, AMCO, AVR, NVR, RR, SUW makeupto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 146 | 25 mm(twenty five millimetrs) |
| 147 | 20 mm(twentymillimetrs) |
| 148 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete of Unik, KS, AMCO, AVR, NVR, RR, SUW makeincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 149 | 15 mm(fifteen millimetrs) |
| 150 | 20 mm(twentymillimetrs) |
| 151 | 25 mm(twenty five millimetrs) |
| 152 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank 1000 (one thousand) litre make of sintex net capacity tank , IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 153 | Providing and fixing ball valve (brass) of approved quality of Kingston, Gem, Parko, Techno, JAL, ESS ESS. JAQUAR, Seiko make, High or low pressure, with plastic floats complete 15mm (Fifteen) millimetres nominal bore including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 154 | Providing and fixing 110 mm (One hundredten millimetres) high pressure PVC spigot and socket, waste and ventilating pipes ISI marked of Finolex makeincluding fixing with approved adhesive etc. complete including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 155 | Providing and fixing 150(One hundredfifty millimetres)high pressure PVC spigot and socket, waste and ventilating pipes ISI marked of Finolex make including fixing with approved adhesive etc. completeincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 156 | Providing and fixing PVC floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. 110 mm X 90 mm including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 157 | Providing and fixing PVC door bend with ovalaccess door, insertion rubber washer 3 mm ( three millimetres) thick bolts and nuts ISI marked of Finolex make complete including fixing with approved adhesive etc.including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 158 | 110mm dia (one hundred ten millimetres) |
| 159 | 150mm dia (one hundred fifty millimetres) |
| 160 | Providing and fixing PVC plain bend ISI marked of Finolex makeincluding fixing with approved adhesive etc. complete.including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 161 | 110mm dia (one hundred ten millimetres) |
| 162 | 150mm dia (one hundred fifty millimetres) |
| 163 | Providing and fixing PVC plain double equal branch ISI marked of Finolex makeincluding fixing with approved adhesive etc. complete.including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 164 | 110mm dia (one hundred ten millimetres) |
| 165 | 150mm dia (one hundred fifty millimetres) |
| 166 | Providing and fixing PVC single equal branch with oval access door, ISI marked of Finolex make insertion rubber washer 3 mm (three millimeyres) thick bolts and nuts complete including fixing with approved adhesive etc. Complete including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 167 | 110mm dia (one hundred ten millimetres) |
| 168 | 150mm dia (one hundred fifty millimetres) |
| 169 | Providing and fixing PVC collars ISI marked of Finolex make including fixing with approved adhesive etc.completeincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 170 | 110mm dia (one hundred ten millimetres) |
| 171 | 150mm dia (one hundred fifty millimetres) |
| 172 | Providing and fixing PVC clamps ISI marked of Finolex makeof approved design with steel screws and rawal plugs etc. Complete including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 173 | 110mm dia (one hundred ten millimetres) |
| 174 | 150mm dia (one hundred fifty millimetres) |
| 175 | Constructingbrick masonry manholein cement mortor 1:4 (One cement: four Sand)with RCC top slab in 1:1.5:3 mix (One cement : one point fivesand : three graded/crushed stone aggregate ) 20mm (Twenty millimetres) nominal size foundation concrete 1:4:8 ( One cement : foursand : eight graded/crushed stone aggregate 40mm (Forty millimetres) nominal size)inside plastering 12mm (Fifteen millimetres) thick with cement mortar 1:3 (One cement : threesand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 ( One cement : twosand : four graded/crushed stone aggregate 20mm (Twenty millimetres nominal size) finished smooth complete in all respect including curing and testing Inside size 120x90 cm (one hundred twenty into ninety centimetres) and 90 cm (ninety centimetres) deep including C.I. cover with frame (medium duty) 500 mm (five hundred millimetrrs) internal diameter, total weight of cover and frame to be not less than 116 kg(one hundred sixteen killogramme) (weight of cover 58 kg (fifty eight killogramme) and weight of frame 58 kg (fifty eight killogramme) with common brunt clay FPS common modular bricks of class designation7.5 (seven point five) including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 176 | Constructing soak pit 1.20x1.20x1.20 m (one point twozero into one point twozero into one point twozero ) filled with brickbats including S.W. drain pipe 100 mm ( onehundred millimetres) diameter and 1.20 m (one point two zero) long complete as per standard designincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 177 | Constructing masonry Chamber 90x90x100 cm(ninety into ninety into one hundred centimetres) inside, in brick work in cement mortar 1:4 (one cement : four coarse sand) for sluice valve, with C.I. surface box 100 mm(one hundred millimetres) top diameter, 160 mm (one hundred sixty millimetres) bottom diameter and 180 mm (one hundredeightymillimetres)deep (inside) with chained lid and RCC top slab 1:2:4 mix (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetres) nominal size ), i/c necessary excavation, foundation concrete 1:5:10(one cement : five fine sand : ten graded stone aggregate 40 mm (forty millimetres) nominal size and inside plastering with cement mortar 1:3 (one cement : three coarse sand) 12 mm (twelve millimetres) thick, finished with a floating coat of neat cement complete as per standard design with common brunt clay FPS common modular bricks of class designation7.5 (seven point five) including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 178 | Providing and laying 450 mm ( Four hundred fifty millimetres) non pressureNP-3 (three)Class (Medium duty) R.C.C.Pipe includingcollars/ spigotjointed with stiff mixture of cement mortar in the proportion of 1:2 ( one cement : two fine sand) including testingof joints etcetra complete including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 179 | Providing and fixing Cowl size 110 mm ( one hundred ten millimetre) including carriage of materials upto all leads and lifts including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 180 | Supplying cast iron cover without frame for manholes for frames of internal dimension 450 ( foure hundred fifty) millimetres C.I.cover (Medium duty ) the weight of cover to be not less than 58kg(fifty eightKilogramme) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
