Provision Of Standby And Connected Items To Coldroom And Cool Room At Blo Unger Ge Gomantak Vasco Provision Of Standby And Connected Items To Coldroom And Cool Room At Blo Unger Ge Gomantak Vasco
Tender Value
17.50 Lakhs
Estimated cost
Bid Submission
25 Sep 2021
0 days left
EMD
35000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
CWE NAVY VASCO → Goa
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Provision Of Standby And Connected Items To Coldroom And Cool Room At Blo Unger Ge Gomantak Vasco Provision Of Standby And Connected Items To Coldroom And Cool Room At Blo Unger Ge Gomantak Vasco
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 08-Sep-2021 | OTHER CORRI | Other | 18-Sep-2021 |
| 2 | 18-Sep-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 25-Sep-2021 |
BOQ
| Sl. No. | Item Description |
| 1 | Supply, install, testing and commissioning, factory assembled diesel engine driven generating set, fully wired alternator 63/ 62.5 KVA/50 KW with AMF Panel continuously rating at a PF of 0.8 lagging, 415 Volts AC 3 phase 4 wire 50 Hz +/- 1% supply, 4 Cylinder, Water Cooled Turbo charged, with mechanical speed governor, developing 83 BHP 1500 RPM, directly coupled with diesel engine confirming to IS 10002, ISO-3046, BS 5514 standard with an overload capacity of 10 % for one hour in every 12 hrs. Operation complying to CPCB II Norms. DG set shall be mounted on channel iron common base frame with AC alternator complete with fuel tank provided within canopy on base frame (Service tank) of adequate capacity with fuel line and accessories, including PCC/ RCC foundation work as per manufacturer instructions, vibration and damper pads (AVM), control panel and other accessories etc all as specified and directed by Engineer in charge and comprising of the following- Note: foundation work will be measured and paid for separately. |
| 2 | (1) Engine:-(a) Diesel engine driven radiator cooled with blower fan.(b) Micro fuel pump with Mechanical Governor(c) Air handling system with dry type, Replaceable paper element air cleaner with restrictionIndicator& air to air after cooler.(d) Exhaust Silencer(e) Turbo charger,(f) Integral set-mounted copper radiator system, designed for 50 degree C ambient temp.(g) Spin on type lube oil filter & fuel filter.(h) Battery suitable rating with Leads and Battery terminals.(i) Suitable Battery charging alternator, Fuel pipe C Class STIC of suitable size.(j) Emergency stop button.(k) 12V Electric starting system.(l) Battery charging alternator(m) Ammeter battery charging(n) Water temp gauge(o) Lub oil pressure gauge |
| 3 | (II) Alternator:-(a) Brushless Exitation type, Screen protected, Revolving field, Self excited alternator conforming to IS/IEC 60034-1, Suitable rated at 0.8 PF 415 V, 3 Phase, 4 wire 50 Hz, at 1500 RPM, self excited and self regulated suitable insulation class, self ventilated for engine.(b) 3 Phase connectable table insulation class, self ventilated for engine copper winding with terminals brought out for connection(c) Sealed bearings for alternator.(d) Having IP 23 Enclosure, H Class of insulation, voltage regulation +/-%(e) Having rodents entry/ water entry protectionNote: Provision of suitable protection for rat and rain water entry into the Alternator. |
| 4 | (III) DG Control Panel:-(a) Control panel is made up of 14/16 gauge CRCA sheet and is powder coated for weather proof consists of the following parts:-(b) Micro processor based DG control module.(c) Aluminium busbars with suitable capacity with incoming /outgoing terminals.(d) Indicating lamps for \"Load ON and Set Running(e) Instrument fuses duly wired and ferrule.(f) MCCB of suitable rating with over load and short circuit protections |
| 5 | (IV) FUEL TANK: -8 Hrs Capacity, with Inlet & Outlet arrangement, air vent & drain plug arrangement. |
| 6 | (V) ACOUSTIC ENCLOSURE(a) Acoustic enclosure should be modular in construction(b) Base frame of Sheet metal.(c) Doors with Durable industrial locking system(d) Doors gasketed with high quality EDPN gasket(e) Sound proofing of the enclosure done with quality Foam confirming to 15 8183.(f) Acoustic form shall be fire retarded and fire resistant.(g) Attenuates are provided to control sound at entry and exit to and from the container. (h) Specially designed Residential Silencer is provided.(i) Neutral Body earthing points at the sides of enclosure isolated through Dough Molded compound. |
| 7 | (VI) VENTILATION AND AIR CIRCULATION:Exhaust pipe is thoroughly insulated by covering it with glass wool and further cladded in Enclosure. |
| 8 | (VII) SAFETIES:Emergency push button to stop the DG set from outside, Lub oil level, Lub oil pressure, Fuel level indicator, coolant level, Canopy temperature, High engine temperature. |
| 9 | Material and labour for \"SERVO CONTROLLED VOLTAGE STABILIZER (Conforming as per BIS 9815: Part 1: 1994 reaffirmed 2009) for automatic operation, three phase, naturally oil cooled indoor type, Unbalanced type, copper wound, Digital display type, Relay free smooth and silent operation with IP 55 protection (Manufacturer CPRI certification) & 1st filling of transformer oil (IS 335:1993 reaffirmed 2005) having following specifications complete all as specified and directed. |
| 10 | Specifications:-(1) In put voltage 300V-480V(2) Output Voltage stablized at 415 + 1%(3) Rated Freq 50HZ(4) No distortion in wave form,(5) Response time not to exceed 10 milliseconds(6) Sensitivity (±) 1%(7) Rate of correction 8 volt/second for single phase and 20 volts/Second for phase to phase.(8) No load losses less than 0.5%(9) Full load losses less than 2.5%(10) Duty cycle-Continuous 24x7(11) Efficiency more than 95%(12) Type of load - Three phase unbalanced type.(13) Digital display voltmeter /Ammeter.(14) Capacity 60 KVA.(15) Bypass Arrangement |
| 11 | Supply, Laying, joining & testing LT XLPE Insulated & sheathed armoured electric cables with multistranded aluminium conductor cable 1100 volts grade, laid in trenches/ ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly encased in galvanised steel pipe of suitable sizes including cable gland of suitable sizes & aluminium lugs for connection for cross sectional area 70 Sq mm, 3.5 Core complete all as specified and directed.Note: Excavation, earth work and Sand Cushioning shall be measured and paid separately. |
| 12 | Excavation in trenches not exceeding 1.5 m width and not exc 1.5m in depth getting out in hard/dense soil complete all as specified and directed by Engr-in-Charge. |
| 13 | Excavation in trenches not exceeding 1.5 m width and not exc 1.5m in depth getting out in Soft/disintegrated rock complete all as specified and directed by Engr-in-Charge. |
| 14 | M&L for sand cushioning in trenches for cable protection complete all as specified and directed.Note: Only Pund thickness should be measured and paid. |
| 15 | Supply and lay PCC cable cover class LV type 1 flat size 250mmx150mmx40mm complete all as specified and directed. |
| 16 | Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm in thick using excavated Soft/hard/dense soil complete all as specified and directed. |
| 17 | Removal of surplus soil to a distance not exceeding 50 m and depositing where directed by Engr in-charge. |
| 18 | Supply and laying GI tubing with all fittings such as nipple, bend, elbow, union etc. Laid in trenches for 50 mm dia light grade complete all as specified and directed. |
| 19 | M&L for earthing complete with copper earth plate electrode 600 x 600 x 3.15 mm thick buried directly in ground earth pit not less than 2.25 m deep below normal ground level with top edge of the plate not less than 1.5 m below normal ground level connected to copper strip Size 25 x 3 mm thick by mean of nuts/bolts check nuts and washers of brass as shown in electrical plate No.3 of SSR part including necessary excavation and earth work. Gt Pipe 15 mm bore light grade for watering with Funnel wire mesh and refilling of soil shall be provided with Gl pipe light grade 25 mm dia up to 7.5 m from the earth plate electrode and refilling of soil including adequate quantity of charcoal dust and common sall etc & earth work in any strata PCC pit chamber in cement mortar 1:3:6 type C-2 with 40 mm thick precast RCC cover slab 1:2: 4 type B with 5 mm dia TMT bar and handle with lifting hooks including testing any type complete all as specified and directed by Engineer-in-chargeNote: GI earth wire upto 7.5 RM is included in the unit rate quoted. |
| 20 | Material & Labour for Cement concrete in foundations, filling and mass concrete type D2 (1:4:8) using 40mm gradded Stone aggregate complete all as specified and directed. |
| 21 | Material & Labour for precast cement concrete block masonry, type C5, (20 mm graded aggregate) with solid blocks, exc 10 cm in with and setting in cement mortar 1:6, complete all as specified and directed. |
| 22 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6including finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 23 | Material & Labour for Hardcore of gauge n exc. 63 mm not exceeding 100mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 24 | Material & Labour for 150 mm thick PCC Cement concrete type B2 (1:2.4) using 40mm graded Stone aggregate as in flooring, filling and mass concrete complete all as specified and directed. |
| 25 | Excavating in post holes (or similar holes)in soft/disintegrated rock each n exc 0.5 cum getting out returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed. |
| 26 | Material & Labour for Cement concrete in foundations, filling and mass concrete type C2 (1:3:6) using40mm graded stone aggregate complete all as specified and directed.(for post hole) |
| 27 | M&L for two coats of cement based paint over a coat of alkali resistance primer including preparation of new plastered surface complete all as specified and directed. |
| 28 | S&F roof trussed framed, trussed, purlines, crane gantries, rails and fastenings and heavy brackets framing (Beam, tee, angles, channel or flat sections) including distance pieces, cleats etc (Fe-410 W (Gde E-250 quality) complete all as specified and directed. |
| 29 | Material & Labour for two coat of anti-corrosive paint on steel surfaces including preparation new steel surfaces over a coat of red oxide zinc chrome primer, over 10 cm in width or girth, not otherwise described complete all as specified and directed. |
| 30 | S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 31 | S&F prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550MPA as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 32 | Supply and installation of LT panel ‘KIOSK type\" cubical, weather, dust and vermin proof (outdoor Type) CPRI approved factory made suitable for operation on 1100 volts 3 phase, 4wire, 50 Hz AC electric supply of size 1mx0.9 mx0.3m, externally powder coated & internally painted with two coats of synthetic enamel paint over one coat of red-oxide primer, made out of 3.15 mm thick CRCA steel sheet as size having opening and locking arrangement both from front and back side with cable tray of size not less than 20cm including Aluminium busbar of suitable size for 200 amps capacity fixing on angle iron size of 50x50x6mm (Ht of legs of Panel should not be less than 60cm) including connected accessories and necessary PCC work 1:3 6 type C-5 blocks complete with following accessories complete all as specified and directed. |
| 33 | (i) MCCB 100 Amps, 4 Pole: 36 KA, lcs 100% of Icu, Adjustable thermal and fixed magnetic setting-01 No (Incoming).(ii) MCCB 63 Amps, 4 pole, 36 KA, lcs 100% of Icu, Fixed thermal and fixed magnetic setting 01 No (Outgoing)(iii) MCCB 40 Amps, 4 pole, 36 kA,lcs= 100% of Icu, Fixed thermal and fixed magnetic setting 02 No (iv) Voltmeter-01 No(v) Ammeter with CTS-01 No(vi) Indicators with neon lamp with RYB shade,240 volts 50 c/s of suitable capacity resistance -01 set(vii) Internal wiring with suitable size PVC insulated single core copper cable for connecting instruments-01 lot |
AI Tender Summary
Tender Timeline
Sep 18, 2021
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 18, 2021
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Sep 25, 2021
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedSep 25, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 27, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender