Military Engineer Services-MES has published Provision Of Rain / Sun Shelter At Pj Gate Rimc And Spl Repair To Flooring Of Verandah In Bldg No P-4 And P-5 At Rimc Under Ge Dehradun.. Submission Date for this Tender is 23-09-2021. PEB Tenders in GE DEHRADUN Uttarakhand. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 16-Sep-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 23-09-2021 |
| Sl. No. | Item Description |
| 1 | Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting outcomplete all as specified and directed. |
| 2 | M&L PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundation filling, mass concrete etc ofcomplete all as specified. |
| 3 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming toFe 410-W(Gde E-250) quality-Aall as specified and directed |
| 4 | S&F polycarbonate sheets 8mm thick ,60 micron, ultra violet coated double layered coloured and as approved by eng-in-charge & GE and fixed with aluminium angles profile rubber gasket silicon screws etcall as specified and as directed.by Eng-in-charge . Make Armstrong , Shri Balaji or Equivalent |
| 5 | S&F Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified and directed. |
| 6 | S&F 2 mm thick Fibre glass reinforced translucent corrugated sheet with two corrugations side lap fixed with screw complete all as specified |
| 7 | M&L for two coats synthetic enamel paint on steel surfaces over a coat of red oxide primer of any description including preparation of new surfaces exc. 10 cms in width or girth all as specified. |
| 8 | Removing of excavated soil to a distance n exc 50 mtr and deposited where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed. |
| 9 | M&L for 304 grade stainless steel hollow tubes with base plate, gusset plate, bracing including stainless steel nuts and bolts welding etc as required ( TIG welding or Tungesten Arc welding) as in vertical posts for supporting the roof frame/truss including grinding and polishing complete all as specified and directed (Note:Roof frame/Truss not included in this Item) |
| 10 | S&F Stainless steel 304 grade pre fabricated letters (English or hindi) of size 24" Heigh, t"20"-22" widthx1.5" thickmade out from 1 mm thick stainless steel sheet fixed with stainless steel screws complete all as specified |
| 11 | S&F stainless steel 304 pre fabricated logo of RIMC of size 24"x20-22"x1.5" made out from 1 mm thick stainless steel sheet fixed with stainless steel screws complete all as specified ( Contractor is advised to see sample kept in office) |
| 12 | Demolition of cement concrete unreinforced in ground floors and pavings n.exc. 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 13 | M&L for 40 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in flooring finished even and smooth using extra cement complete all as specified and directed. |
| 14 | S&F 3mm thick ACP (Aluminum composite material)fixed with screw on MS frame workall specified and as directed.by Eng-in-charge Make : Alex or any other equivalent make approved by GE. (Note - MS Frame work not included in this item). |
| 15 | Supply and fix Aluminium partition wall made out of aluminium powder coated section 83 x 44.45 x 1.56 mm top and bottom rail, style and middle rail 83 x 44.45 x 2.00 mm complete 5.0 mm thick tinted glass in top panel and 12 mm thick pre-laminated particle boardin bottom panel complete with rubber packing/aluminum beading etc including provision of aluminium door including 03 Nos 100 mm Stainless steel hinges, 200 mm D type aluminum powder coated handle 02 Nos , 200 mm long aluminum powder coatedtower bolt 02 Nos and 01 No Hydraulic door closer with provision of brass mortice lock 6 lever complete all as specified and directed. |
| 16 | Material and labour for aluminum alloy powder coated standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter and one noswire gauged shutter sliding type, 3 track with aluminum sections for 3 numberssliding windows(Size of track 15mm as per Series-Aof Jindal or equilant of any other approved manufacturer),and glazed with tinted glass coloured glass 4mm thick, fixed with glazing clips, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum tower bolt 150mm long etc complete all as specified and directed. Shutter Top & bottom size : 37.50x15x1.60mm Shutter inner lock size 37.50x15x1.60 mm Shutter side (Handle) size 37.50x15x1.36mm Chowkhat bottom size : 75x26x1.20mm Chowkhat top & sides size:75x26x1.00mm |
| 17 | Supply and fix powder coated aluminum Grill made of 6mm size aluminum bars, with 50mm x 50mm mesh size for window complete all as specified and directed. |
| 18 | Providing & fixing false ceiling of fibre cement Designer tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (as approved) in true horizental level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grms, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and croos "T" of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c toform a grid of 1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mmand laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable wire of 2mm dia with galvanised butterfly level clips, spaced at 1200mm c/c along main "T", bottom exposed width of 15mm. All "T"" sections shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width, including taking down existing ceiling of any type all complete at all heights as per direction of Engineer-in-Charge. |
| 19 | Demolition of Brickwork or stone/boulder masonry, built in lime/ cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified. |
| 20 | M&L Brickwork with subclass ‘B’ old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified. |
| 21 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 finished fair and evencomplete all as specified and directed. |
| 22 | M&L 15mm thick renderingin cement mortar 1:4 on other than fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement)complete all as specified. |
| 23 | S&F 3 mm Nylon netting with 25mmx25mm aperture for bird proofing fixed with screw to framed ceiling complete all as specified. |
| 24 | M&L 16 to 18 mm thick Granite work (of any type, table rubbed and polished) on vertical surfaces such asskirting/ dado orwall lining, set and jointed in need cement slurry and pointed with white/ coloured cement (1:2) using marble dust with admixture of pigment to match withshade of granite over and including 12mm thick bedding layer in cement mortar (1:3) complete all as specified. |
| 25 | M&L 10 mm thick(square/ rectagular)colouredVitrified Ceramic tiles polished,area of each tilesexceeding 0.18 sqm but not exceeding 0.36 sqm ,in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified. |
| 26 | M&L for preparation of newly plastered surface of wall and applying two coat of oil bound distemper over a coat of primer complete all as specified. |
| 27 | M&L for preparation of newly plastered surface of wall and applying two coat of exterior emulsion paint (Apex) over a coat of primer complete all as specified. |
| 28 | S&F 600 mm dia stainless steel turbine Air ventilator outer dia 780 mm comprising of nylon typhonic bearing, double top cap, corrugated foil framed vanes, housing on translucent sheet opel base complete all as specified. |
| 29 | M&L for 25 mm thick plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in sub base finished even and rough to receive floor finishes/screed complete all as specified and directed. |
| 30 | M&L for makrana white Marble of size30cmx30cmx15-18mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone as in flooring including Grinding, rubbing and wax polishing with mirror finish over andincluding 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. Note Marble shall be cut to the size from the slab after approval of shade of slab by Engr-in-charge |
| 31 | M&L for Granite(of any type) of size 30cmx30cmx15-18mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone as in flooring including Grinding, rubbing and wax polishing with mirror finish over andincluding 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. Note Marble shall be cut to the size from the slab after approval of shade of slab by Engr-in-charge |
| 32 | M&L for makrana white Marble 12-15mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone as in Skirting including Grinding, rubbing and wax polishing with mirror finish over andincluding 15 mm thick rendering in cement mortar 1:4 complete all as specified and directed. Note (a) Marble shall be cut to the size from the slab after approval of shade of slab by Engr-in-charge (b) skirting should be same stone Shade as Used in Flooring |
| 33 | M&L for Granite(of any type) 12-15mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone as in Skirting including Grinding, rubbing and wax polishing with mirror finish over andincluding 15 mm thick rendering in cement mortar 1:4 complete all as specified and directed. Note (a) Marble shall be cut to the size from the slab after approval of shade of slab by Engr-in-charge (b) skirting should be same stone Shade as Used in Flooring |
| 34 | M&L for grinding and polishing on existing terrazo /stone flooring , dado skiring etc, with grinding machine or by hand using 120 to150 grit size carborendumstone including cleaning and washing the surfaces, rubbed hard with felt and slightly moistened auxalic acid powder @ 5 gram per sqmcomplete all as specified and directed. |
| 35 | Taking down carefullyexisting aluminium/copper point wiring on battenor in PVC conduit or in MS conduit with GI earth wire etc (for light, fan, socket or power ) complete and making goodthe disturbedsurfaces of walls, Floors, ceilings etc to match with existingall as specified and directed. |
| 36 | M & L for point wiring complete with PVC insulated and unsheathed, Flame retardant low smoke ( FRLS ) 1100 volt grade electric cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core in and including rigid PVC consealed conduit not less than 19 mm dia, clip, complete with all accessories such as socket, elbow, junction box, bell mouth, bend, reducer etc including pressed iron/steel junction boxof thickness1.2mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable green colour as earth wire upto common earth and connected to earth dolly complete all as specified including lugs required for One light/fan point controlled by one switch , complete all as specified and directed. |
| 37 | All as per itemNo 36but for one 5 pin 5 Amp socket outlet point on same board complete all as specified and directed. |
| 38 | All as per item No 36but for one 5 pin 5 Amp socket outlet point on independent board complete all as specified and directed. |
| 39 | All as peritem No 36 here in beforebut with 4 Sqmm copper conductor cables (multistranded) PVC insulated FRLS,unsheated cable and including 4 Sqmm copper conductor cable(multistranded) PVC insulated FRLS and unsheated cableearth continity wire to common earth and connecting to earth dolly for one 6 pin 15 Amp socket outlet point on independent board complete all as specified anddirected. |
| 40 | S&F switch piano flush type single pole, 5 Amps, one way all as per specified & directed. |
| 41 | S&F switch piano flush type single pole, 20 Amps, one way all as per specified & directed. |
| 42 | S&F socket outlet 6 Amps, 5 pin, 2 in 1 complete all as specified and directed |
| 43 | S&F socket outlet multipurpose 5 and 15 Amps, 5 pin, 2 in 1 complete all as specified & directed |
| 44 | S&F switch socket combination 5 Amps, 5 pin, 2 in 1 complete all as specified and directed |
| 45 | S&F switch socket combination multipurpose 5& 15 Amps, 5 pin, 2 in 1 complete all as specified and directed |
| 46 | S&F ceiling rose surface bakelite 3 terminals of size 65x25mm complete all as specified and directed |
| 47 | S&F step type, electronic fan regulator 120 watts, 5 step for ceiling fan 1200/1400 mm sweep 230 volts AC complete all as specified and directed |
| 48 | S&F wall mounted LED tube light fitting 1x20 watts extruded aluminiumpolycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K & lumen input output 95 Lumen per watt and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall/roof complete all as specified and directed. Make: Philips cat part No BN 021 C LED 20 S PSU CW GR S2 /HavellsENDURALINEARNEOBS20W LED840SPCWH / Wipro LL20-281-XXX-65AL1 |
| 49 | S&F LED Street light 25 Watt made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having top opening seperate driver compartment with IP66 protection and impact resistance of iK07, with bracket and all accessories and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make - Havells Cat part No - Endurapearl SL25WLED757SASYTOPCMP or equivalent in HPL/ Cromption / Wipro. |
| 50 | S&FAir circulator 450 mm ange 230 Volt 50 Hz AC with all connecting accesoories including flexible wire for connecting with ceiling rose all as specified and directed. Make - Havells Turbo Force or equivalent in Bajaj/ Cromption. |
| 51 | S&F Decorative Ceiling Fan Pearl White colour1200mm sweep, 230 Volt 50 Hz AC with all connecting accesoories including flexible wire for connecting with ceiling rose all as specified and directed. Make : Havells(Model - Nocola/Spartz/Enticer) or equivalent of Bajaj/ Usha/ Cromption) |
| 52 | S & Fsheet metal enclosure SPN for DB"s when MCB"s to be used DB" 8 way with 200 amps bus bar anddouble doo rcompleteall as specified anddirected. |
| 53 | S&F metal clad single pole and neutralenclosure with2 pin and earth plug and socket complete with and includingone single pole MCB 20 Amp 240Volt complete. |
| 54 | S&F MCB SPN240 Volt 10 KA6 to 40 Amp "C" series conforming to IScomplete all as specified & directed.Make: Legrand cat no 4086 18 or eqvt in L&T/ Schneider. |
| 55 | S&F MCB SP(single pole)240 volt, 10 KA, 6-40Amp, "C" series confirming to IS complete all as specified and directed.Make: Legrandor 4085 96 eqvt in L&T/ Schneider. |
| 56 | M&L for submain wiring with 3 runs (P+N+Earth continuityconductor) of 4 Sqmm single core,PVC insulated, unsheathed, multistranded copper conductorFRLS cable 1100 volts grade recommended colour code ,drawn throughand includingSurface PVC conduit pipe of medium duty not less than15 mm dia including necessary PVCconduit specials and connecting all wires with suitable size thimble complete all as specified anddirected. Note:-3 runs of4 Sqmm size PVC copper cable, and one run of PVC conduit shallbe measured as one unit length. |
| 57 | M&L for earthing completewith galvanized iron or steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 Mtrs below ground level) with top edge of earth plate not less than 1.5 Mtrs below ground level connected to galvanized iron strip 32x6 mm by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, including PCC (concrete chamber) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate, with fair finish internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire gauge of (0.68mm) 8 mesh per liner inch, 80 mm thick RCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-Iand specified includingprovision of earth wire protected by 40mm dia medium grade GI pipe and watering pipe shall be 20mm bore medium grade GI pipe, and including all excavation andearth work & connecting the earthing to an earthing test point /transformer nuetral/body/ Lt panel etc. and testing on completion, complete all as specified & directed by Engr-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
