|
| 1 | Earth Work excavation in all classes of soils such as hard stiff clay, stiff black cotton, hard red earth, shales, murram, ordinary earth, earth mix with 50% fair sized boulders etc., with initial lead and lifts including laying, spreading, levelling, sectioning breaking clods etc., including all incidental charges etc. complete as per standard specification.(For Foundations SS 20B ) |
| 2 | Supplying and filling in foundation and basement with filling Sand ( M Sand) in layers of not more than 15 cm thick well rammed consolidated etc. complete complying with standard specification and as directed. |
| 3 | Plain Cement Concrete 1:4:8 Mix (one part cement, Four part sand and Eight part of aggrigate) using 40mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications. |
| 4 | Supplyingand Fabrication and placing in position of TMT bars for all RCC works with cost of binding wire and cost of cutting, bending ,tying in position including cost and conveyance of all materials and labour charges etc., complete as per standard specification. |
| 5 | Providing Reinforcement Cement concrete1:1½:3 (One cement one point five sand and three aggregates) mix using 20mm gauge hard granite broken stone jellyin all RCC works connected to the work excludingshuttering , Centering and cost of Reinforcement grills but including cost and conveyance of all materials and labour charges etc., complete as per standard specification |
| 6 | Supplying & Erecting RCC centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle of size 25 x 25 x 3mm for boarding laid over silver oak joists(Country wood) of size 10 x 6.5cm spaced @ about 90cm c/c and supported by casurina props of 10 - 13cm dia. spaced @ 75cm c/c etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.for the following items (For all R.C.C Works )including cost and conveyance of all materials and labour charges etc., complete as per standard specification |
| 7 | a) Grade Beam |
| 8 | b) Column |
| 9 | Brick work in Cement Mortar in 1:5 ( One cement and Five Sand ) using best quality ofStockbricks2nd class of size 9x 41/2x 3including all cost of materials and labour charges includingCuring charges etc., complete as per Standard Specification. |
| 10 | Supplying and fixing of M.S.grill of approved design for doors. Windows and ventilators using necessary mild steel flats for inner and outermembers which should be fixed to window frames inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications. |
| 11 | Plastering c.m 1:5(one cement and five sand) mix to a thick of 12mm using clean screened sand and including the cost of curing for 15 days from the completion of work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting from other damages till setting of mortar etc complete complying as per MORTH Specifications. TNDSS No.56 & 57 |
| 12 | Painting the walls one coats with approved cement paint over one priming coat etc.,complete complying with standard specifications. |
| 13 | Painting two coats old iron work for doors, windows and ventilators using iron bars, window grills weld mesh screen in opt courtyard etc., with two coat synthetic enamel paint and approved quality and color including priming coat in all floors.The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc., complete complying with standard specifications. |
| 14 | Plain Cement Concrete 1:3:6 Mix (one part cement, three part sand and six part of aggrigate) using 20 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc. complete. Complying with std. specifications. |
| 15 | Supplying and fixing in position Cement basedhydraulically pressed Anti-Skid tiles (pattern design) 20 mm thick in cement mortar 1:3 - 20mm thick & pointedwith same colour of cement etc., complete as per standard specification |
| 16 | Providing and laying of 80mm thick high strength type of interlocking pavement block in M40 grade size 26 x 12 x 8cm other than grey colour of required sizes with minimum compressive strength of 40 N/mm2 in uniform shape of approved make to be laid in lorrying bone pattern with approved non sticking surface in the top and the rate including leveling the base, preparation of sub base with sand cushion 100mm thick, laying out the pavement, cut the pieces to fit the edge, vibrating the pavers, sweeping the sand grouting, providing transporting, loading unloading and laying of paver block as per standard specification. |
| 17 | Dadooing the walls from the floor level with white glazed tiles of 300mmx300mm x 6mm of best and approved quality set in cement mortar 1:2 mix (one cement and two sand) 12mm thick and pointing with white cement neatly as directed Complying with standard specifications |
| 18 | Supply and Fixing of Red soil and compost mannur inculding all charges etc., Complete |
| 19 | See Saw 4 Seater - Fiber reinforced plastic of width 7ft 0\" and supporting frame made of 40mm GI Pipes and Swinging Arm made of 50mm GI Pipes of length 8ft 0\". Handle made of 19mm GI pipes Seats are fibre reinforced plastic and including epoxy painting etc., complete. (LR) |
| 20 | Slide - 8ft Height wave slide made of Stainless Steel moulded materials and ladder 1 inch G.I pipe ½ inch cross steps supporting of 1 ¼” inch G.I pipe. Sliders are Stainless Steeland including epoxy paintingetc., complete. |
| 21 | Junior Swing - Fiber reinforced plastic seats and supporting frame made of 40mm GI Pipes and Swinging Arm made of 50mm GI Pipes of length 8ft 10\". Handle made of 19mm GI pipes Seats are fibre reinforced plastic and including epoxy painting etc., complete. (LR) |
| 22 | Swing 4 Seater - Fiber reinforced plastic seats and supporting frame made of 40mm GI Pipes and Swinging Arm made of 50mm GI Pipes of length 8ft 10\". Handle made of 19mm GI pipes Seats are fibre reinforced plastic and including epoxy painting etc., complete. (LR) |
| 23 | Supplying Delivery and fixing ofOrnamental GraniteStone Benches (3 seaters 1.80 x 0.45m / 1seater 0.90m x 0.45m) made out ofby approved quality and colour of 100mm thick granite stone slabas seater 1.80 x 0.45m, backrest 1.80m x 0.45m on the both side legs and fixed in position at proposed Locations. |
| 24 | Supply and erection of 4m height galvanized octagonal street light pole of 4 mtr above Ground level with base plate of size 200mm x 200mm x 12mm with necessary arrangements. The lamp post shall be octagonal tapered type (Starting from approximately 130mm at bottom and 70mm at top and fixing of 1.00m length 40mm dia tapered type single bracket, it shall be provided with theflash door with smoothening opening type. The pole shaft shall have octagonal cross section and shall be continuously tapered with single longitudinal welding. The base plate shall be fillet welded to the pole shall at two locations (inside and outside) with single straight bracket including cost of 4 Nos of M 20 x 450mm long ‘J’ type foundation bolts (En 8 grade) and necessary nuts & washers and 50mm PVC pipe for cable entry and foundation size of 450mm x 450mm x 750mm including all civil works, all labour charges (L.e. Lamp fixing) etc., complete as directed by the departmental officers. |
| 25 | Supply and Fixing of 30w LED Street Light Fitting including cost of bracket,etc., complete. |
| 26 | Supply and laying of 2 core 6 sq.mm. PVC Armoured UG Cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. |
| 27 | Supply and Fixing of 100A Panel Board incoming 100A TPN Switch with variousrange of TP/DP/SP MCB with suitable angle iron framework |
| 28 | Supplying and Fixing of Aluminium Dye Cast Letters ofapproved size and colour. The colour treatment process is achieved with MRF colour coat and then theprocessed coloured layer is set into the kiln for the heat treatment process |
| 29 | Aluminium Dye Cast Letters 9\"\" size |
| 30 | Aluminium Dye Cast Letters 6\"\" size |
| 31 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete |
