construction Const. Of Drainage System And Bio Medical Waste Disposal Pit At Gorubathan Bphc At Gorubathan, 43Rd Constituency, Gta
Tender Value
5.27 Lakhs
Estimated cost
Bid Submission
16 Sep 2021
0 days left
EMD
10558
Bank guarantee accepted
Document Fee
1005
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
GORUBATHAN → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
construction Const. Of Drainage System And Bio Medical Waste Disposal Pit At Gorubathan Bphc At Gorubathan, 43Rd Constituency, Gta
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75m.as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. |
| 2 | Labour for laying 150 mm to 200 mm boulder soling including rough dressing hand packing and ramming down small pieces in the interstics including rolling and preparing the bed to proper level and filling up all joints with sandy clay or earth |
| 3 | Cement concrete with 30mm down graded shingles excluding shuttering In ground floor (a) 1:3:6 proportion |
| 4 | Ordinary cement concrete (mix 1:2:4) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in Ground Floor as per revelent IS codes (Using Bitumen Emulsion at the rate of 0.20 to 0.30 kg per sqm. (ii ) River Bazree |
| 5 | Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground ground floor) 25 mm to 30 mm shuttering without staging in foundation |
| 6 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]With 1:4 cement mortar 15 mm thick plaster |
| 7 | Neat cement punning 1.5mm thick in wall dado, window sills floors drains etc.using cement @0.152m3/100m2 |
| 8 | M.S. structural works in roof trusses with tubular sections conforming to IS 806-1957 & IS 1161-1958 conencted to one another with bracket gusset cleats as per design, direction of Engineer-in-charge complete including cuting to requisite size fabrication with necessary metal arc welding conforming to IS 816-1956 & IS 9595 using electrodes of apporved make and brand conforming to IS 814-1957 haulage, hoisting and erection all complete.The rate includes the cost of rolled steel section, confumables such as the cost of gas and hire charges of all tools and plants and labour required for the works incouding all incidental charges such as electricity charges labour insurance charges etc.For trusses spanning upto 12.00m |
| 9 | Galvanized corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10mm dia J or L hook - bolts, limpet and bitumen washers and putty complete with 150mm end lap at one and one corrugation minimum side lap. In roof With 0.60 mm thick sheet |
| 10 | Double knotted wove wire 2.1m ht (17 bars) vertical 300 mm apart, horizontal spacing starting from 88mm ending 200mm top bottom wire 10g and all other intermediate and upright wire 9g with finished border 2 ply twisted fencing including tightening and fixing the same to post with staples at every bar including cost of cutting and lapping joints in the net as necessary including the cost of staples and wove wire. |
| 11 | Labour for fitting wove wire or similar fencing net tightening and fixing the same to post with staples at every bar (including the cost of cutting and lapping joints in the net, the cost of staples, binding wire etc. and of labour for fixing such staples as necessary).Net above 1350 mm. height |
| 12 | MS or WI ornamental grill of approved design joints continously welded with MS , WI, flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs .In ground Floor Grill weighing above 16kg/m2 and above For hanging and locking arrangements includng supply of materials and labour complete.(15% over corressponding item)For supplying fitting and fixing bottom rollers including all labour complete .(5% over corressponding item) |
| 13 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surface by sand papering etc. |
| 14 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on surface if necessary. On steel or other metal surface . With super high gloss,Two coats (with any shade except white) |
AI Tender Summary
Tender Timeline
Aug 27, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 20, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender