|
| 1 | 1. Nemukur Khanajan to Kawaimari Beel RoadClearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlierand disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201.By Manual Means-, In area of non thorny jungle |
| 2 | Removing all types of Hume pipes and stacking within a lead of 1000 m including Earthwork and Dismantling of Masonry Works as per Technical Specification Clause 202.C) Above 900 mm dia Hume pipe |
| 3 | Compacting original ground supporting embankment Loosening, Levelling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to adepth of 150mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Tables 300.1 and 300. 2 for embankment construction as per Technical Specification Clause 301.4.1. |
| 4 | Construction of Embankment with Material Obtained from Borrow PitsConstruction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting p g to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 |
| 5 | Construction of Subgrade and Earthen ShouldersConstruction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. (I) Private Land |
| 6 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavatorat OMC, and compacting with smoothwheelroller to achieve thedesired density, complete as per Technical Specification Clause 401. (A)By Mix in Place Method (ii) For Grading Material (Gr - II ) |
| 7 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smoothwheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405......By Manual MeansWBM Grading 3 Using crushable screening such as moorum gravel for Gr.III |
| 8 | Providing and laying interlocking concrete block pavement with M40 grade grade of concrete blocks having thickness 80mm as per technical specification clause 1504 complete including carriage.Including Edge block/ Edge restraints |
| 9 | CROSS DRAINAGE WORKSEarthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification Clause 1104 includding setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. |
| 10 | Type B (First Class) BeddingLaying (First Class) bedding on well compacted sand, moorum as per Clause 1105 (ii) |
| 11 | Plain Cement Concrete M10 (1:3:6 nominal mix) in levelling course below open foundation of Head walls as per drawings & Technical Specification Clause 1109 |
| 12 | Brick Masonry Work in cement mortar in foundation of Head walls complete exculding pointing and plastering as per drawing and technical specification Clause 1109 (ii) Brick masonry in 1:4 cement mortar |
| 13 | Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granularmaterial in single row includingfixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106. 1000mm dia. |
| 14 | Plastering with Cement Mortar (1:4), 15 mm thick on brickwork in substructure as per technical specification |
| 15 | Backfilling in Foundation Trenches as per drawing and technical specification Clause 1108 (i) Sand filling |
| 16 | Providing and fixing of typical informatory sign board as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 |
| 17 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as perdrawings and Technical Specification Clause 801ii)600mm equilateral triangle |
| 18 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as perdrawings and Technical Specification Clause 801iii) 600mm circular |
| 19 | Planting of Trees and their Maintenance for three Year (Planting of trees by the road side (Avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge mannure, planting the saplings, backfilling the trenches, watering, fixing the tree guatrd and maintaining the plants for three year. |
| 20 | DustbinProviding concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 A. With crushed Stone I .P.C.C grade M 10 Nominal mix 1:3.6 (Hand mixing) |
| 21 | Brick masonry work in 1:3 in sub-structure complete excluding pointing and plastering, as per drawing and technical specifications |
| 22 | Plastering with cement mortar (1:3 ) on brick work in sub-structure as per Technical specifications |
| 23 | 2. Demow polytechnic to Kochumari road.Clearing and Gruubing Road Land:-Clearing and grubbing road land includding uprooting wild vegetation ,grass, bushes ,saplingsand trees of girth upto 300mm , removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of seviceable material to be used or auctioned , upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150mm in thickness as per Technical Specification clause 201. i By Manual Means |
| 24 | Construction of Sub -grade and Earthen Shoulders:- Construction of Sub - grade and earthen shoulder with approved materials obtained from borrow pits with alllift and leads ,transporting to site ,spreading ,grading to required slope and compacted to meetrequirement of Tables300.2 withlead upto 1000 m as per Technical Specificationclause 303.1(i) Private Land |
| 25 | Granular Sub-base with Well Graded Material (Table 400.1) (A) BY Mix Place Method :- Construction of granular sub-baseby providing well graded material ,spreading in uniform layerswith motor grader on prepared surface ,mixing by mix in place method with rotavator at OMC ,and compacting with smooth wheel roller to achieve the desired density ,complete as per Technical Specification claaause 401. (ii) For Grading II Material |
| 26 | WBM Grading 3Using stone screening Type - B 11.2 mm for Gr. III :- Providing , laying ,Spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness , hand packing , rolling with three wheel 80 -100Kn static roller in stages to proper grade and camber ,applying and brooming , stonescreening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical specification clause 405.By Manual Means |
| 27 | Providing and Laying interlocking concrete block pavement with M 40 grade of concrete blocks having thickness 80mm as per technical specification clause 1504 complete including carriage . A)Including Edge block / Edge restraints |
| 28 | Traffic Signs( A) Retro -reflectorised Traffic Signs1. Providing and fixing retro- reflectorised cautionary ,mandatory and informatory sign as per IRC : 67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting ,1.5 mm thick supported on a mild steel angle iron post 75mm x 75 mmx 6mm firmly fixed to the ground by means of properly designed foundation with M-15 grade concrete 450mmx450mmx600mm , 600mm below ground level as per drawings and Technical Specification clause 801. (ii) 60 cm equilateral triangle |
| 29 | 3. Kesuwani RoadClearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlierand disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201.By Manual Means-, In area of non thorny jungle |
| 30 | Dismantling of existing structures like culverts, bridges, retaining wall sand other structures comprising of brick masonry, including disposal of unserviceable material and stacking the service able material with all lift and lead of 1000 m as per Technical Specification Clause 202.Face Wall b) Brick masonry Structures in cement mortar |
| 31 | Removing all types of Hume pipes and stacking within a lead of 1000 m including Earthwork and Dismantling of Masonry Works as per Technical Specification Clause 202.(A) Upto 600 mm dia Hume pipe |
| 32 | Removing all types of Hume pipes and stacking within a lead of 1000 m including Earthwork and Dismantling of Masonry Works as per Technical Specification Clause 202.B) Above 600 mm to 900 mm dia Hume pipe |
| 33 | Compacting original ground supporting embankment Loosening, Levelling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to adepth of 150mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Tables 300.1 and 300. 2 for embankment construction as per Technical Specification Clause 301.4.1. |
| 34 | Construction of Embankment with Material Obtained from Borrow PitsConstruction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting p g to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 |
| 35 | Construction of Subgrade and Earthen ShouldersConstruction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. (I) Private Land |
| 36 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavatorat OMC, and compacting with smoothwheelroller to achieve thedesired density, complete as per Technical Specification Clause 401. (A)By Mix in Place Method (ii) For Grading Material (Gr - II ) |
| 37 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smoothwheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405......By Manual MeansWBM Grading 3 Using crushable screening such as moorum gravel for Gr.III |
| 38 | Providing and laying interlocking concrete block pavement with M40 grade grade of concrete blocks having thickness 80mm as per technical specification clause 1504 complete including carriage.Including Edge block/ Edge restraints |
| 39 | CROSS DRAINAGE WORKS (1000 mm Dia)Earthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification Clause 1104 includding setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. |
| 40 | Type B (First Class) BeddingLaying (First Class) bedding on well compacted sand, moorum as per Clause 1105 (ii) |
| 41 | Plain Cement Concrete M10 (1:3:6 nominal mix) in levelling course below open foundation of Head walls as per drawings & Technical Specification Clause 1109 |
| 42 | Brick Masonry Work in cement mortar in foundation of Head walls complete exculding pointing and plastering as per drawing and technical specification Clause 1109 (ii) Brick masonry in 1:4 cement mortar |
| 43 | Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granularmaterial in single row includingfixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106. 1000mm dia. |
| 44 | Plastering with Cement Mortar (1:4), 15 mm thick on brickwork in substructure as per technical specification |
| 45 | Backfilling in Foundation Trenches as per drawing and technical specification Clause 1108 (i) Sand filling |
| 46 | CROSS DRAINAGE WORKS (600 mm Dia)Earthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification Clause 1104 includding setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. |
| 47 | Type B (First Class) BeddingLaying (First Class) bedding on well compacted sand, moorum as per Clause 1105 (ii) |
| 48 | Plain Cement Concrete M10 (1:3:6 nominal mix) in levelling course below open foundation of Head walls as per drawings & Technical Specification Clause 1109 |
| 49 | Brick Masonry Work in cement mortar in foundation of Head walls complete exculding pointing and plastering as per drawing and technical specification Clause 1109 (ii) Brick masonry in 1:4 cement mortar |
| 50 | Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granularmaterial in single row includingfixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106. 600mm dia. |
| 51 | Plastering with Cement Mortar (1:4), 15 mm thick on brickwork in substructure as per technical specification |
| 52 | Backfilling in Foundation Trenches as per drawing and technical specification Clause 1108 (i) Sand filling |
| 53 | Providing and fixing of typical informatory sign board as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 |
| 54 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as perdrawings and Technical Specification Clause 801ii)600mm equilateral triangle |
| 55 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as perdrawings and Technical Specification Clause 801iii) 600mm circular |
| 56 | Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 ii) Ordinary Kilometer stone |
| 57 | Planting of Trees and their Maintenance for three Year (Planting of trees by the road side (Avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge mannure, planting the saplings, backfilling the trenches, watering, fixing the tree guatrd and maintaining the plants for three year. |
| 58 | DustbinProviding concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 A. With crushed Stone I .P.C.C grade M 10 Nominal mix 1:3.6 (Hand mixing) |
| 59 | Brick masonry work in 1:3 in sub-structure complete excluding pointing and plastering, as per drawing and technical specifications |
| 60 | Plastering with cement mortar (1:3 ) on brick work in sub-structure as per Technical specifications |
| 61 | 4. Kaliapani field to Madhupur RoadClearing and Gruubing Road Land:-Clearing and grubbing road land includding uprooting wild vegetation ,grass, bushes ,saplingsand trees of girth upto 300mm , removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of seviceable material to be used or auctioned , upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150mm in thickness as per Technical Specification clause 201. i By Manual Means |
| 62 | Construction of Embankment with Material Obtained from Borrow Pits:- Construction of embankment with approved materials obtained from borrow pits with a liftupto 1.50m ,transporting to site ,spreading ,grading to required slope and compacting to meetrequirement of Tables 300.1 and 300.2 with a lead upto 1000m as per Technical Specification 301.5. (i) Private Land |
| 63 | Construction of Sub -grade and Earthen Shoulders:- Construction of Sub - grade and earthen shoulder with approved materials obtained from borrow pits with alllift and leads ,transporting to site ,spreading ,grading to required slope and compacted to meetrequirement of Tables300.2 withlead upto 1000 m as per Technical Specificationclause 303.1(i) Private Land |
| 64 | Granular Sub-base with Well Graded Material (Table 400.1) (A) BY Mix Place Method :- Construction of granular sub-baseby providing well graded material ,spreading in uniform layerswith motor grader on prepared surface ,mixing by mix in place method with rotavator at OMC ,and compacting with smooth wheel roller to achieve the desired density ,complete as per Technical Specification claaause 401. (ii) For Grading II Material |
| 65 | WBM Grading 3Using stone screening Type - B 11.2 mm for Gr. III :- Providing , laying ,Spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness , hand packing , rolling with three wheel 80 -100Kn static roller in stages to proper grade and camber ,applying and brooming , stonescreening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical specification clause 405.By Manual Means |
| 66 | Providing and Laying interlocking concrete block pavement with M 40 grade of concrete blocks having thickness 80mm as per technical specification clause 1504 complete including carriage . A)Including Edge block / Edge restraints |
| 67 | Traffic Signs( A) Retro -reflectorised Traffic Signs1. Providing and fixing retro- reflectorised cautionary ,mandatory and informatory sign as per IRC : 67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting ,1.5 mm thick supported on a mild steel angle iron post 75mm x 75 mmx 6mm firmly fixed to the ground by means of properly designed foundation with M-15 grade concrete 450mmx450mmx600mm , 600mm below ground level as per drawings and Technical Specification clause 801. (ii) 60 cm equilateral triangle |
| 68 | Earth work in excavation of foundation of structures as per drawing and technical specification,including setting out,construction of shoring and bracing,removal of stumps and other deleterious matter,dressing of sides and bottom and backfilling with approved material. Ordinary soil :A. Manual Means. (i) Without dewatering, a) Upto 3 m depth. |
| 69 | Laying (First class) bedding on well compacted sand, moorum as per clause 1105(ii) Granular material |
| 70 | Plain cement concrete M10(1:3:6 nominal mix) in leveling course below open foundation of Head walls as per drawing and technical specification clause 1109. |
| 71 | Brick masonry work in cement mortar in foundation of head walls complete excluding pointing and plastering as per drawing and technical specification clause 1109 (in prop.1:3) |
| 72 | Plastering with cement mortar (1:4) 15mm thick on brick work for substructure as per technical specification. |
| 73 | Providing and laying RCC pipe NP3 for culverts on first class bedding of granular materials in single row. B) 600mm dia |
| 74 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of side |
| 75 | PCC 1:3:6 in Foundation (Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed,placed in foundation and compacted by vibration including curing for 14 days.) |
| 76 | Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. |
| 77 | Stone masonry work in cement mortar in foundation complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203. |
| 78 | Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. |
| 79 | Providing and laying cement concrete wearing course M 30 grade including reinforcement complete as per drawing and technical specifications Clauses 800 and 1206.3 |
| 80 | Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smallersize towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing |
| 81 | Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing |
| 82 | Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202 |
| 83 | Construction of RCC railing of M30 Grade in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space |
