Power Government Departments Closing in 0 days TDR #28992120

Repair And Maintenance Of Ct-Type, P-Type, E And Cpt-Type Residences At Dakpathar Colony, Dakpathar, Dehradun

Issued by Government Departments · Dakpathar, Uttarakhand
Tender Value
Ref. Documents
Estimated cost
Bid Submission
18 Sep 2021
0 days left
EMD
80500
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Dakpathar → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Repair And Maintenance Of Ct-Type, P-Type, E And Cpt-Type Residences At Dakpathar Colony, Dakpathar, Dehradun

BOQ

Name of Work: Repair & Maintenance of CT-Type, P-Type, E and CPT-Type Residences at Dakpathar Colony, Dakpathar, Dehradun.
Sl. No. Item Description
1Demolishing cement concrete manually/ by mechanical means including disposalof material within 50 metres lead as per direction of Engineer in charge. (CPWD DSR2019, Building Works, Code No 15.2.2)
2Dismantling cement concrete or brick or granolithic floor etc., including disposal of dismantled material as directed by E/I within a distance of 60 m (PSI 697)
3Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead.(CPWD DSR2019, Building Works, Code No 15.12.1)
4Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (CPWD DSR2019, Building Works, Code No 15.56)
5Demolishing brick work, manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable materialwithin 50 metres lead as per direction of Engineer-in-charge.PWD (CPWD DSR2019,Building Works, Code No 15.7.4)
6Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil.(CPWD DSR2019,Building Works, Code No-2.6 )
7Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level.1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). (CPWD DSR2019,Building Works, Code No-4.1.8)
8Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level. 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate 20 mm nominal size).(CPWD DSR2019,Building Works, Code No-4.1.3)
9Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of step setc. complete.40mm thick with 20mm nominal size stoneaggregate. (CPWD DSR2019,Building Works, Code No-11.3.1)
10Providing and fixing glass strips in joints ofterrazo/ cement concrete floors. 40 mm wide and 4 mm thick. (CPWD DSR2019 Building Works, Code No- 11.13.1)
11Reinforced cement concrete work in beams,suspended floors, roofs having slope up to 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:2:4(1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size). (CPWD DSR2019Building Works, Code No- 5.3)
12Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Reinforcement for R.C.C. Work Using Mild Steel and Medium /Tensile Steel Bars. (CPWD DSR2019,Building Works, Code No- 5.22.1)
13Centring and shuttering including strutting,ropping etc. and removal of form for Shelves etc.(Cast in situ) (CPWD DSR2019,Building Works, Code No- 5.9.4)
14Centring and shuttering including strutting,ropping etc. and removal of form for Lintels, beams, plinth beams,coulmn girders,bressumers,cantilevers etc (CPWD DSR 2019,Building Works, Code No- 5.9.5)
15First class brick work in 1:4 with old dismantled bricks with cement and coarse sand of 2.5 FM mortar in foundation and plinth including supply of all material, labour and T&P etc. required for proper completion of the work. (NSI) ( including cost of cement )
16Brick work with F.P.S. bricks of class designation75 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand). (CPWD DSR2019,Building Works, Code No- 6.1.2)
17Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in Cement mortar 1:6(1 cement : 6 coarse sand).(CPWD DSR2019,Building Works, Code No- 6.4.2)
18Half brick masonry with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in Cement mortar 1:4 (1 cement :4 coarse sand). (CPWD DSR2019,Building Works, Code No- 6.13.2)
1912 mm cement plaster of mix1:6 (1 cement : 6 coarse sand) . (CPWD DSR 2019,Building Works, Code No- 13.4.2)
2012 mm cement plaster of mix1:4 (1 cement : 4 coarse sand) .(CPWD DSR2019,Building Works, Code No- 13.4.1)
21Supply and fixing welded mesh of 50x50 mm and 10 gauge including cost of all material, labour and T&P etc. complete required for proper completion of the work. (NSI)
22Supply & fixing mosquito proof jali 16x24 gauge with MS flat of size 20X3 mm size screwed/ welded to windows or doors frame including supply of necessary all material, labour etc complete. (BSI-533)
23S/Replacement of the following types of oxidized iron fitting of approved quality
24a) Providing and fixing ISI marked oxidised M.S.sliding door bolts with nuts and screws etc 300x16mm .(CPWD DSR2019,Building Works, Code No- 9.62.1)
25b) Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc.150x10 mm .(CPWD DSR2019,Building Works, Code No- 9.63.3)
26c) Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. 100x58x1.90 mm(CPWD DSR2019,Building Works, Code No- 9.57.2)
27d) Providing and fixing ISI marked oxidised M.S.handles conforming to IS:4992 with necessary screws etc. 100 mm . (CPWD DSR2019,Building Works, Code No- 9.66.2)
28(e) Providing and fixing ISI marked oxidised M.S. single acting spring hinges 150mm (CPWD DSR2019,Building Works, Code No- 9.59.1)
29Cement plaster skirting (up to 30 cm height) with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement. 18 mm thick . (CPWD DSR 2019,Building Works, Code No- 11.6.1)
30Attending minor type of repair for full day by engaging and supplying one suitable carpenter//Mason /Plumber for carrying simple type of repairing of all work including all T&P etc. complete but excluding cost of material.(NSI)
31Attending minor type of repair for full day by engaging and supplying one suitable Beldar/mazdoor for carrying simple type of repairing of all work including all T&P etc. complete but excluding cost of material.(NSI)
32Removal of of debris /waste material/ any other material / rubbish by full load tractor trolly as desired by the Engineer-in- charge & safe disposal of the same out side the nigam area including cost ofall labour, T&P etc required for proper loading/unloading and disposal of waste or any other materialrequired for the proper completion of the work. (NSI)
33White washing with lime to give an even shadeOLD WORK : (two or more coats). (As per DSR2019, Code No- 13.87.1)
34Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification.Two or more coats on new work. (CPWD DSR 2019,Building Works, Code No- 13.42.1)
35Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete. as per manufacturer\"s specification Old work (one or more coats) (CPWD DSR2019,Building Works, Code No- 13.108.1)
36Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surfac (CPWD DSR2019,Building Works, Code No- 13.111.1)
37Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work. (CPWD DSR2019,Building Works, Code No- 13.99.1)
38Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work (CPWD DSR2019,Building Works, Code No- 13.61.1)
39Letter writing with preparation of base including supply of all materials, labour and T&P etc. required for proper completion of work (NSI-6)
40Providing and fixing trap of self cleansing design with screwed down or hinged Sand Cast Iron S&S as per IS: 1729. (CPWD DSR2019,Building Works, Code No- 17.60.1.2)
41Providing and fixing white vitreous china water closet squatting pan (Indian type) Orissa pattern W.C. pan of size 580x440 mm (CPWD DSR2019,Building Works, Code No- 17.13.2)
42Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend.(CPWD DSR2019,Building Works, Code No- 17.68.1)
43Providing and fixing P.V.C. low level flushing cistern with manually controlled device( PWD -10 litre capacity-White(CPWD DSR2019,Building Works, Code No- 17.18.1)
44Providing and fixing white vitreous china wash basin including making all Flat back wash basin of size 550x400mm. (CPWD DSR2019,Building Works, Code No- 17.25.2)
45Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required 610x460 mm bowl depth 200 mm(CPWD DSR2019,Building Works, Code No- 17.10.2.2)
46Supply and fixing CP waste jali for steel sink of approved quality complete. ( NSI-2)
47PVC/CI 100 mm dia Jali of approved quality complete. ( NSI-4 )
48Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. 32mmdia (CPWD DSR2019,Building Works, Code No- 17.28.1.1)
49Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length, 15 mm nominal bore(CPWD DSR2019,Building Works, Code No- 18.21.2.1)
50Providing and fixing ball valve (brass) of approved quality complete High or low pressure with plastic floats 15 mm nominal bore. (CPWD DSR2019,Building Works, Code No- 18.18.1)
51Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (CPWD DSR 2019,Building Works, Code No- 18.48)
52Providing and fixing brass bib cock of approved quality 15 mm nominal bore (CPWD DSR2019,Building Works, Code No- 18.15.1)
53Providing and fixing brass stop cock of approved quality 15 mm nominal bore(CPWD DSR2019,Building Works, Code No- 18.16.1)
54Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Iinternal work - Exposed on wall 15 mm dia. nominal bore (CPWD DSR2019,Building Works, Code No- 18.10.1)
55Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. (external work) 15 mm dia. nominal bore. (CPWD DSR2019,Building Works, Code No- 18.12.1)
56Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. (external work) 20 mm dia. nominal bore. (CPWD DSR2019,Building Works, Code No- 18.10.2)
57Hire charges of welding machine with single phase with welder, helper and electrodes etc. for repair and welding of gates, door, window etc. for 8 hrs. in a day complete with all material labour, T&P etc. required for proper completion of work.(NSI)
58Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position Sal wood. (CPWD DSR2019,Building Works, Code No-9.1.2)
59Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6mm for diagonal braces and central cross piece. (CPWD DSR2019,Building Works, Code No- 10.5.2)
60Structural steel work riveted, bolted or welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: (CPWD DSR 2019,Building Works, Code No- 10.2)
61S/F of galv. Mosquito proof heavy quality Iron wire gauge of expended metal heavy quality (24x14 gauge) over door/windows with shisham wood beadings and including supply and fixing necessary screws nails and all material labour and T&P etc. required for proper completion of work (PSI 456)
62Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire 9.38 kg per 100 m (minimum) between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately) :- Payment to be made per metre cost of total length of barbed wire used with G.I. barbed wire.(CPWD DSR2019,Building Works, Code No- 16.18.1)
63Same as item 57 above but excluding cost of barbed wire.(PSI-513)
64Providing and mixing approved water proofing material in cement mortar for plastering or in concrete work in proportion of recommended by the manufacturer.( PSI-599 )
65Providing and fixing 30 mm thick wire gauze shutters using galvanised M.S. wire gauze of average width of aperture 1.4mm with wire of dia. 0.63 mm for doors, windows and clerestory windows including ISI marked Stainless steel butt hinges with necessary screws.Kiln seasoned selected class of Sheesham wood (CPWD DSR2019,Building Works, Code No- 9.27.2.1.3)
66Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked black enamelled M.S butt hinges with necessary screws excluding panelling which will be paid for separately. Kiln seasoned selected planks of sheesham wood 35 mm thick shutter . (CPWD DSR2019,Building Works, Code No- 9.5.3.1)
67Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : Sheesham wood 50x12 mm. (CPWD DSR 2019,Building Works, Code No- 9.40.1.1)
68Providing and fixing of 18 gauge aluminium sheet of approved quality including cutting, wastage and fixing the same over wooden door shutters by nails including cost of all material, labour and T&P etc. (BSI-499)
69Renewing glass panes, with putty and nails wherever necessary Float glass panes of thickness 4 mm . (CPWD DSR2019,Building Works, Code No- 14.5.1)
70Providing and fixing on wall faceunplastisize PVC rain water pipe conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes.75mm Diameter(CPWD DSR2019,Building Works, Code No- 12.41.1)
71Providing and fixing on wall faceunplastisize PVC rain water pipe conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes.110mm Diameter (CPWD DSR2019,Building Works, Code No- 12.41.2)
72Providing and fixing on wall faceunplastisize PVC moulded fittings/accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.75mm Diameter(CPWD DSR2019,Building Works, Code No- 12.42.1.1)
73Providing and fixing on wall faceunplastisize PVC moulded fittings/accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.110mm Diameter(CPWD DSR2019,Building Works, Code No- 12.42.1.2)
74Providing and painting two coat of Pidi create URP Compound on roof, sunshade and masonary wall for water proofing to check the leakage with cement in the proportion of 1:1.5 (URP : Cement ) recommonded by the manufactureincluding suply of all material, labour and T&P etc. required for proper completion of the work. (Based on PSI-641+642)
75Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Enginee r-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.CPWD DSR2019,Building Works, Code No- 8.31)
76Providing and laying Ceramic glazed floor tiles 300x300 mm (thicknessto be specified by the manufacturer) of 1stquality conforming to IS :15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete. CPWD DSR2019,Building Works, Code No- 11.37)
77Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm CPWD DSR2019,Building Works, Code No- 11.41.2)
78Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms,vanity counters ,window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels. : Granite of any colour and shade.Area of slab over 0.50 sqm (CPWD DSR2019,Building Works, Code No- 16.86.1)
79Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle boardIS : 3087 marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately).
80(a) 12 mm thick. ( CPWD DSR 2019,Building Works, Code No- 9.17.1)
81(b) 18 mm thick. ( CPWD DSR2019,Building Works, Code No- 9.17.2)
82P/F C.P. brass or M.I. trap for wash basin, sink 32mm dia. ( BSI-326 )
83Renewal of old putty of glass panes(length)( CPWD DSR2019,Building Works, Code No- 14.9)
84Providing corrugated G.S sheet roof including verticl/curved surface fixed with polymer coated J or L hooks,bolt and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlaping of sheets complete upto any pitch in horizontal/vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275gm/m ( CPWD DSR2019,Building Works, Code No- 12.1.3)
85S/F 15 mm dia CP brass pillarcock of approved quality with all labour material & T&P etc. complete (NSI)
86Providing & fixing15mm (1/2\") diameter full way brass gate valvewith wheel valve of superiorquality including supply of all material, labour,T&P etc. required for proper completion of the work.(PSI-213)
87Supply & fixing C.I.cover with frame for man holes size 455X610mm rectangular C.I.cover .The weight of the cover to be not less than 23kg ( CPWD- 2019 CODE No- 19.18.1 )
88S/Laying one layer of ISI marked Tarfeltof approved 1st quality as water proofing treatment over top of over roof sheets of the residences as directed by the E/I including necessary overlap giving a coatof approved mastic paint in between Tarfelt& sheets & also over surface of tarfelt after laying. Rate includes supply of all labour, material & T & P etc required for proper completion of the work.( NSI )
89Removing dry & oil bound distemper , water proofing cement paint & the like by scrapping , sand papering& prepairing the surface smooth including necessary repairs to scratches etc. Complete. (CPWD DSR2019,Building Works, Code No- 13.91)
90S/F 6 mm thick gray corrugated A.Csheets roofing in position including supply of material, labour, T&P and wastage required for proper completion of work. (NSI)
91Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm (for corrugated roof sheets) (CPWD DSR2019,Building Works, Code No- 14.90.1)
92Providing and fixing false ceiling with 12 mm thick plain/ semiperforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bonded pressed particle board conforming to IS:3087 finished with a coat of aluminium primer on both sides & edges and two coats of synthetic enamel paint of approved quality on exposed face fixed to a grid made out of anodised aluminium(with 15 micron anodic coating) T-sections 35 x15x1.5 mm size main runners and cross runners 23.5x19x1.5 mm fixed to main runners placed 600 mm centre to centre both ways so as to form a grid of 600 mm square. The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia M.S rod fixed to roof slab by means of ceiling cleats. Thesuspenders shall be placed 600x 1200 mm centre to centre including fixing to the frame with C.P brace screws and applying a priming coat of zinc chromate yellow primer (aluminium frame work shall be paid) (CPWD DSR2014,Building Works, Code No- 12.29)
93Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters & 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (CPWD DSR2019,Building Works, Code No- 9.21.2)
94Diluting and injecting chemical emulsion for POST CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall & rodding etc. complete:With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration (CPWD DSR2019,Building Works, Code No- 2.35.1.1)
95Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.(CPWD DSR2019,Building Works, Code No- 2.35.3.1)
96Brick on edge pavement with straight overburnt bricks laid on edge including preparation of subgrade to prescribed camber and including supply of bricks, filling joints with local sand and spreading blinding coat 1cm (3/8\") depth of local sand over the entire surface and including supply of all materials, labour and T&P etc. required for proper completion of the work.(PWD SOR Miss. FY- 2019, Code No. 2-4)
97Providing and fixing of road stud 100x 100 mm, die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling hole 30 mm upto a depth of 60 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS 873 part 4:1973). Including supply of all material, labour T&P etc. required for proper complition of the work. (PWDSOR MORTH- FY- 2019-20, Code No. 8-35)
98Providing and fixing Solar Powered Road Studs (Rectangular) of size not less than 100mm x 100 mm x 10 mm or (Circular) of dia 130+/- 6mm and height 30 +/- 2mm (with 8 super bright LEDs for long visibility from distance greater than 800 m) having twin shank and body made of aluminium alloy and poly carbonate material which shall be absolutely weather resistant and strong enough to support a load of 13635 kg tested in accordance with ASTM D 4280 and water resistance as per IP 65 in accordance with IS 12063:1987, fixed to the road surface using adhesives and the procedure recommended by the manufacturer as per Clause No. 804.6 and 804.7 of MORTH specifications.(PWD SOR FY- 2019-20, Code No. 5-3)
99Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide stripes, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and confirming to IRC-79 and the drawings.(PWD SOR FY- 2019, MORTHNo. 8-15)
100Direction and Place Identification signs upto 0.9 sqm sizeboard.(Providing and erecting direction and place identification retro-reflectorised sign asperIRC:67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing)(PWD SOR FY- 2019, MORTHNo. 8-5)
101Direction and Place Identification signs with size more than 0.9 sqm size board. (Providing and erecting direction and place identification retro- reflectorised sign asper IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing)(PWD SOR FY- 2019, MORTHNo. 8-6)
102Providing and applying 1.2mm thick EPDM (Ethyle Pethyle Desmodor Monomor) water proofing membrane along with surface preparation by mechanical grinder over construction joint/ expansion joint along with applying Ist coat of primer followed by one coat of adhesive for EPDM on the surface and rubber membrane including supply of all material labour T&P etc, also including treatment to expansion/construction joints. (PWD 2014 - 83329 1-26-5)
103Treatment to cracks by using polyurethane based single component permanently elastic joint sealent of Groove size (7.5mm x 12.5 mm) including cost of all material labour T&P etc. (PWD 2014 - 83332 1-26-8)
104Water proofing treatment by highly flexible mixed blended polymer in three layers mixed with neat cement 1:3 (1 blended polymer: 3 cement). Mixed blended polymer is used in place of bio degradable epoxy.(PWD- 83334 1-26-10)
105Painting with aluminium paint of approved brand and manufacture to give an even shade .Two or more coats on new work (CPWD DSR2019, Code No- 13.63.1)

AI Tender Summary

OUR REF NO 28992120
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 18-09-2021
Authority
Authority Name Uttarakhand Jal Vidyut Nigam Limited
Work Description Repair And Maintenance Of Ct-Type, P-Type, E And Cpt-Type Residences At Dakpathar Colony, Dakpathar, Dehradun
Basic Detail
Tender No 10/EE/PCM-DKP/TN/2021-22
Bidding Type Tender
Location
City Dakpathar
State Uttarakhand
Key Dates
Publish Date 26 Aug 2021
Submission Date 18 Sep 2021
Open Date 20 Sep 2021
Finance
Tender Value Ref. Documents
Tender Fee 2360
EMD 80500
Exemption Not Available
Document List
5e710f2f-0f31-49f8-ad3f-ba0f13d3c68d.html
BOQ_42360.xls
TD_10.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 26, 2021
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 18, 2021
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Sep 20, 2021

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

5e710f2f-0f31-49f8-ad3f-ba0f13d3c68d.html

xls

BOQ_42360.xls

pdf

TD_10.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender