Bids Are Invited For Boq Total Quantity : 1 Supply Of Tools For Getaw--1 Steel Ruler ( 500Mm Long ) Stainless Steel 1Mm Thickness , Length 500Mm ( 50Cm ) With Measurement Units In Mm & Inch On Either Side. 23 Nos 2 Outside Spring Calliper Outside Spring Caliper With 6-In / 150-Mm Digital Calipers Are Made Of Stainless Steel, Have A Rated Accuracy Of 0.001 In ( 0.02Mm ) And A Resolution Of 0.0005 In ( 0.01 Mm ) . 31 Nos 3 Inside Spring Calliper Material : Carbon Steel Measuring Range ( Mm ) : 30-320 Mm Jaw Length ( Mm ) : 300 Mm 34 Nos 4 Vernier Calliper Analogue Vernier Calliper, Measuring Range 0-150 Mm With Nib Style Jaw, Stainless Steel With Ruler On Mm. 33 Nos 5 Micrometer ( 0.02Mm ) Accuracy: ±.00012” / ±3Μm For Micrometer Head Feed, Measuring Rod Diameter Range 0 - 150Mm , Base Size 101.6X16mm 31 Nos 6 Dividers Measurement Range: 0 To 8-1 / 4 In. Reach: 8 Inch. Material Stainless Steel. 19 Nos 7 Vernier Height Guage Vernier Height Gauge With Measurement Range Of 0 - 300 Mm, And Is Graduated To 0.02 Mm, With + Or - 0.04 Mm Of Accuracy. 35 Nos 8 Surface Plate Overall Flatness ≤ 19 Μm, Length 200 - 210 Mm , Width 1000-1100 Mm, Thickness 250-300 Mm , Working Height 850-900 Mm, Stand Cast Iron With Adjustable Screw, Corners Chamfered And Rounded 33 Nos 9 Scrubber Material : M S Steel , Dia : 100Mm , Height :- 60Mm, Weight :- 100 Gms 15 Nos 10 Punch Center Punch Material M S Steel, Length 50Mm, Dia 60Mm, 0.01 Sharpness Point At End. 13 Nos 11 V-Block Steel V-Blocks Material:- Hardened & Ground Alloy Steel Having Hardness 55 - 60 Hrc , Conforming To Is 2949- 1992 Available In Different Grades Of Accuracies. I.E. Grade-0, Grade-1 And Grade-2 Accuracy Limits, Having Included Angle 90º± 5 35 Nos 12 Angle Plate Standard Sizes As Per Is-2554-1971, Sizes ( Mm ) ( L X B X H ) 125 X 75 X 100, Flatness Of Working Faces Gr1 - 5. 31 Nos 13 Try Square Specifications Accurate To Bs939 Grade B Standard 50Mm ( 2In ) , Overall Size 70 X 50 X 8.5Mm , Internal Size 50 X 31Mm, Blade Thickness 1.7Mm 29 Nos 14 Taps And Tape Wrench Material M S Iron, Thread Sizes M1 - M8, Square Nut Sizes 2 - 4 Mm, Total Length 125 Mm, Weight Codeprice 80 G 10 Nos 15 Hacksaw A Standard 12-Inch ( 300Mm ) Hacksaw Blade With 0.63Mm Thick. 35 Nos 16 Hammers ( Ball Peen, Stright Peen, Crossed Peen Hammer With A 7-20 Oz ( 0.2-0.6 Kg ) Head And A 12-13 In ( 30.5-33.0 Cm ) Handle. 27 Nos 17 Chisel ( Flat Chisel, Cross Cut Chisel, Half Round Chisel, Diamond Chisel ) Description :-Flat Chisel / Cross / Cut Diamond , Length 12.0 , Shank Diameter 0.75, Size :- 1 X 12 Width 1.0 30 Nos 18 Flat File Material: Steel, Size: 200Mm Or 8 Inches Fine Flat File 20 Nos 19 Hand File Material: Steel, Size: 200Mm Or 8 Inches Hand File 25 Nos 20 Round File Material: Steel, Size: 250Mm Or 9 Inches Round File
