Construction Of Parks In Sivakasi Construction Of Parks In Sivakasi
Tender Value
2 Crore
Estimated cost
Bid Submission
07 Sep 2021
0 days left
EMD
2 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
SIVAKASI → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Parks In Sivakasi Construction Of Parks In Sivakasi
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling,clearing away and carefully stacking materials useful for re-use for any thickness of the damaged brick walls as direct given by the department officers complete as per standard specification |
| 2 | Earth work excavation for foundation in all soils and sub soils and to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring, strutting and baling out water wherever necessary and refilling the sides of foundation with excavated earth in layers of 15cm thick well rammed and consolidated & depositing the surplus earth in places shown by departmental officers with an initial lead of 10m and lift of 2m and clearing and levelling the site etc. complete complying with standard specification. |
| 3 | Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 4 | Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D) |
| 5 | Plain Cement Concrete 1:2:4 (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour chargesetc., complete as per standard specification |
| 6 | Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials) |
| 7 | Supplying, fabricating and placing in position M.S. or R.T.S. reinforcements grill for RCC works as per the design given including cost of steel and binding wire etc., complete complying with standard specification. (The contractor will have to make his own arrangements for the supply of M.S. plain rods / RTS rods and binding wire) (TNBP No: 86, 86A, 87) |
| 8 | Brick work in CM 1:5 (one cement & five sand) using II class ground moulded country bricks of size 8 3/4\" x 4 1/4\" x 2 3/4\"including finishing, curing, etc., complete complying with standard specification - 100CFT |
| 9 | Plastering with cement mortar (1:3) 10mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications |
| 10 | Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications |
| 11 | Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification. |
| 12 | Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement including all cost and conveyance of all materials to site etc., Complete as per standard specification. |
| 13 | Supplying and fixing of Stainless Steel slide 10ft long 18g stainless steel with 35 x 35x6mm angle reinforcement and slide rails with aluminium chequered platform ladder made of 50x25mm pipe. Including all cost and conveyance of all materials and labour cost etc., complete as per standard specification. |
| 14 | Supplying and Fixing of Double Swings 10ft 60mm Cross bar with sealed bearing and hock arrangement, 10ft 60mm Support pipes 4 no\"s, Stainless steel chain FRP seats-2 no\"s. Area required: 14ftx10ft Including all cost and conveyance of all materials and labour cost etc., complete as per standard specification. |
| 15 | Supply and fixing of Doble SeeSaw 60mm seesaw 7ft long with FRP seat and sealed bearing 60m pipe stand.Area requried: 10ftx10ft Including all cost and conveyance of all materials and labour cost etc., complete as per standard specification. |
| 16 | Supply and fixing of Merry go round(6seat) 5ft dia 6 metal seats with 60mm centre pipe with double bearing arrangements. Area required: 10ftx10ft Including all cost and conveyance of all materials and labour cost etc., complete as per standard specification. |
| 17 | Painting 2 coats with approved cement paint over cement plastered wall surface, ceiling and other new surface and including cleaning, preparing the surface and curing etc., complete. |
| 18 | Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coatincluding the cost all materials etc.,complete, in all floors. |
| 19 | Charges for Conducting Geophysical Survey to locate for favourable point for drilling 6 ½\" dia borewell |
| 20 | Drilling of 150 mm dia vertical bore in hard rock area of any required depth as directed by the departmental officers excluding cost of 180 mmPVC casing pipes ofrequired length including transportation charges for rig and supporting vehicle from one place toanother place etc., complete complying with standard specification |
| 21 | Supplying of PVC casing pipe 180mm 6KSC diametre without slots for inserting in the drilled hole including jointing the pipes, etc., complete as directed by departmental officers. |
| 22 | Supplying and fixing in position of 90x20lpmxm single phase submersiblemotor ISI standardincluding cost of material’s and labor charges etc .Complete. |
| 23 | Supplying and fixing in single pahase panel board with two level gard and out start withISI standardincluding cost of material’s and labor charges etc .Complete. |
| 24 | Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable withproper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. |
| 25 | Supply and fixing of PVC Pipe and specials32mm Dia UPVCPipe |
| 26 | 32x25mm dia G.I Reducer |
| 27 | 25mm G.I H Nipple |
| 28 | 32mm UPVC coupler |
| 29 | 25mm G.I Union |
| 30 | 25mm G.I Ball Valve |
| 31 | 25x20mm G.I Tee |
| 32 | 20mm G.I Elbow |
| 33 | 20mm Dia G.I Coupling |
| 34 | 20mm Dia Tap |
| 35 | 20mm G.I Pipe |
| 36 | 25mm PVC Pipe |
| 37 | Supply delivery and fixing of Nylon roap using for sub motor safty precaution including cost and conveyance of all materials and labour charges etc complete as per standard specification. |
| 38 | Supply and fixing of PVC insulated and sheathed 3 core flat type copper cable 2.50Sq.mm conforming to 694/1990 for the year 2017-18including cost and conveyance of all materials and labour chargesetc complete |
| 39 | Supplying and fixing of HDPE tank(1000 Litre) including cost of tank and fixing in position all labor charges etc. complete as per standard specification. |
| 40 | Supply and run off2 x 6 polytheneinsulated PVC seathed heavy duty sce.alu. cable of 1100 V grade in suitable G.I. pipe with suitable bends on both endswith necessary angle iron up right and support for mains E.B.Schedule |
| 41 | Supply and fixing of 15 A arial fuse unit on suitable MS plate with hylem sheet on thetapping pole with necessary clamps. only. |
| 42 | Wiring with 2 x 2.5 Sq.mm PVC Shethened Sc. Aluminium Cable of 650 V grade on wall and ceiling with T.W.Accessories with Switch Box in flush with wall and covered with Hylem Sheet of 3 mm thick with painting of suitable colour for light point as per standard Specifications |
| 43 | supply and fixing of pole Mounted Twin Stainless steel bin withRoof used by S.S 202 Grade Capacity 60Liter Weight 40Kg Digmersent 14\" x 20\" pole Mounted Dustbin for Iteal For Parks Garden ,Roadsite , School, Hospital , Hotel amnd Etc Its Helpsto Keep the scrounding clean and Hygienic easy tiltable penex make it easy to and empty and clean in bins |
| 44 | supply and fixing of Plastic Wheel Dustbin (1100 Liter ) capacity 1370mm x1060mm x1340mm 55 kg Material HDPE Colour Green Load 440Kgincluding Orchits 1100 Liter Green Virgin Plastic Wheels Dustbin is a premium Quality Orchits Manufacture use inQuality as Material and advance Chiniqes with make them upto the Standard in theSkyly Challanged |
| 45 | Supply and Plantation of Korian Cross and Other Fertilizer etc |
| 46 | Supplying and fixing of LT3 Phase panel board incoming 200 A andoutgoing 63A cubical switch- 6 no and Bus arrangements and 1`` x ¼`` copper flat earthy arrangement |
| 47 | Supplying and laying of 2 x 10 sq mm PVC armoured LTUG Cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt Layer of Sand and covering the cable completely with bricks and sand and refilling the earth to make good |
| 48 | Supplying and laying of 4 x 10 sq mm PVC armoured LTUG Cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt Layer of Sand and covering the cable completely with bricks and sand and refilling the earth to make good |
| 49 | Supplying and laying of 4 x 16 sq mm PVC armoured LTUG Cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt Layer of Sand and covering the cable completely with bricks and sand and refilling the earth to make good |
| 50 | Supplying and laying of 3.5 x 95 sq mm PVC armoured LTUG Cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt Layer of Sand and covering the cable completely with bricks and sand and refilling the earth to make good |
| 51 | Wiring with 2 x 6 Sq mm (84/0.3) PVC Insulated SC unsheathed Cu.Conductor of 1100 V grade in Suitable PVC rigid Pipe on wall and Ceiling with Continious earth Connection of 14 SWG TC wire with Painting of Suitable Color |
| 52 | Supply and fixing of Post Top Landern Pillar Type Light fittings 65 mm GI Pipe of 3 mt length with 300mmx300mmx6mmMS Base duly welded at the bottom with concreting with construction of Masonry Pedestal with suitable MS Boxto house 5 A Control Switch 16 A fuse unit (500 V) etc., with Suitable angle Iron frame work with door and Lock Key arrangements and with supply and fixing of 2x11 W CFL Lamp ( frp 51/211) with 1mtr of of 32 mm dia GI Pipe with necessary Clamps on the above Post with PVC unsheathed lead with painting |
| 53 | Supply and fixing of 250W MH Lamp Fittings 65 mm GI Pipe of 6 mt length with 300mmx300mmx6mmMS Base duly welded at the bottom with concreting with construction of Masonry Pedestal with suitable MS Boxto house 5 A Control Switch 16 A fuse unit (500 V) etc., with Suitable angle Iron frame work with door and Lock Key arrangements and with supply and fixing of 250 W MH Lampwith 1mtr of of 32 mm dia GI Pipe with necessary Clamps on the above Post with PVC unsheathed lead with painting |
| 54 | Supply and fixing of Street Light with CFL Fittings 65 mm GI Pipe of 4.50 mt length with 300mmx300mmx6mmMS Base duly welded at the bottom with concreting with construction of Masonry Pedestal with suitable MS Boxto house 5 A Control Switch 16 A fuse unit (500 V) etc., with Suitable angle Iron frame work with door and Lock Key arrangements and with supply and fixing of 2x32 W CFL Lamp ( frp 51/211) with 1mtr of of 32 mm dia GI Pipe with necessary Clamps on the above Post with PVC unsheathed lead with painting |
| 55 | Supplying and fixing of Foot Path side BOLLARD fittings,completes etc.,FGC 100/109 1x PLS 9 W |
| 56 | Supply and fixing of 500 W Hallozen lamp fittings at ground level with suitable anchrage |
| 57 | Supply and fixing of 3 phase 4 way double door MCB sheet steel enclosure Distribution board in flush with wall and making good of the consealed portionwith earth connection only. The MCB DB should be with ISI mark (Like Standard make) ( As per Market Rate) |
| 58 | Supply and fixing of 32 A 4 Pole MCB |
| 59 | Supply and fixing of 20 A 4 Pole MCB |
| 60 | Supply and fixing of 20 A SinglePole MCB |
| 61 | Supply and fixing of 10 A SinglePole MCB |
| 62 | Supply and fixing of TNEB meter Board Suitable for 3 phase 200 A service connection made up of suitable angle iron frame work of size 1 1/2\" x 1 1/2\" x 1/4\" rigitly fixed on wall covered with hylemsheet of 3 feet x 2 feet of 12 mm thickness with necessary bolts and nuts supports and supply and fixing of 3 nos of 200 A fuse unit ( 500 V) 1 No nurtral link,copper earth flat of size 1\" x1/4\" with inter connection of EB metre to fuse units by 19/16 PVC insulated copper wire with earth ConnectionComplete |
| 63 | Earthing as per ISI specification with an earth electrode of 2.1 meters B Class GI Pipe of dia not less then 32 mm with Copper Earth plate of size 125mm x 50 mm x 6 mm with necessary funnelling arrangemenst withnecessary masonry work construction and with 38 mm RCC Cover slab for the brick masonry |
AI Tender Summary
Tender Timeline
Aug 26, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 08, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender