Light Facility To Hand Ball And Tennis Court Installation Of Light Facility To Hand Ball And Tennis Court In The University Campus.
Tender Value
8 Lakhs
Estimated cost
Bid Submission
07 Sep 2021
0 days left
EMD
12003
Bank guarantee accepted
Document Fee
1792
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
UNIVERSITY OF CALICUT → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Light Facility To Hand Ball And Tennis Court Installation Of Light Facility To Hand Ball And Tennis Court In The University Campus.
BOQ
| Sl. No. | Item Description |
| 1 | Supply ,Conveying and erection of the following size of \"B\" class GI pipe in single section for post top lantern of all types on concrete base (excluding charges for concrete base and excavation) and painting with 2 coats of synthetic enamel paint over coat of zinc chromate primer etc. as required ,100mm dia pipe. (od292792/ 2020_2021) |
| 2 | Supplying and conveying 6 sqmm 4 core PVC/XLPE insulated armoured cable with aluminium conductors for working voltages up to and including 1100 volts conforming IS 1584/part I/1988 for PVC IS 7098 part I for XLPE. (od295243/2020_2021) |
| 3 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade offollowing size in the existing RCC/ HUME/ METAL pipe as required.Upto 35 sq. mm. (7.5.1) |
| 4 | Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation50/38 mm ornearest size. (90.12.10.2) |
| 5 | Supplying ,conveying and fixing ,commissioning of 100to 120 Watts Energy saving ,environmentalfriendly, Long life, exclusive innovative die -cast aluminium flood lights with high power LED s as light source. Die -cast aluminium housing (heat sink) for efficient thermal management ,sturdiness and excellent corrosion resistance. SS Hard wares, Silicon gasket and Cable gland PG 9 is provided at cable entry for maintaining ingress protection.(Fixing at existing pole). (od295488/2020_ 2021) |
| 6 | Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc as required - Above 8.0 metre and upto 11.0 metre (11.3.3) |
| 7 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole. (2.10.1) |
| 8 | Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete withconnections, testing and commissioning etc. as required. 63 amps. (2.13.2) |
| 9 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps. (2.15.3) |
| 10 | Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required6 way (8+18) - three phase double cover (IP 42/43). (90.11.1.11) |
| 11 | Supplying and fixing SMC box (syntex) nearest size of (250mm*200mm*100mm) on existing concrete foundation with MCB channel. on existing concrete foundation. (od298317/2020_2021) |
| 12 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole. (2.10.3) |
| 13 | Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and givingconnection as required - 3.15 mm copper conductor ( 10 SWG). (90.16.1.3) |
| 14 | Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required - 3.15 mm (10 SWG). (90.16.5.3) |
| 15 | Earthing with G.I. earth pipe 2.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required (Dimension of pit should be minimum of 2.5m*0.6m*0.6m). (od298880/2020_2021) |
| 16 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVCinsulated copper conductor single core cable in surface / recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLSPVC insulated copper conductor single core cable etc as required.Group A. (1.10.1) |
| 17 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required - 2X 2.5 sq. mm + 1 X 2.5 sq.mm earth wire. (1.14.2) |
| 18 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm. (1.17.12) |
| 19 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. (1.32) |
| 20 | Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden blockincluding connection etc as required. (1.33) |
| 21 | Installation of exhaust fan in the existing opening, including making good the damage connection testing,commissioning etc. as required.Upto 450 mm sweep. (1.50.1) |
| 22 | Supplying and fixing PVC batten/ angle holder including connection etc. as required. (1.58) |
| 23 | Charges for cutting holes suitable for accommodating exhaust fans above 305mm sweep and up to 450mm sweep including plastering colour washing etc. as required. (90.4.9) |
| 24 | Supplying 305 mm sweep, 1400 rpm Heavy Duty Exhaust fan working on 230 V A/C . (od303354/2020_2021) |
| 25 | Supplying 16 sqmm 4 core PVC/XLPE insulated armoured cable with aluminium conductors for working voltages up to and including 1100 volts conforming IS 1584/part I/1988 for PVC IS 7098 part I for XLPE. (od303554/ 2020_ 2021) |
| 26 | Wiring plug point along with wiring of light point including supply fixing 5A flush type modular switch and 3 pin plug socket in combined position.(Combined Plug). (od303576/2020_2021) |
| 27 | Supplying and installation of 20W 4 Ft. LED Tube set .including connections etc completed. (od303597/2020_ 2021) |
| 28 | Supplying and making end termination with brass compression gland and aluminium lugs for followingsize of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required - 4 X 16 sq. mm (28mm). (9.1.33) |
| 29 | supplying and making end termination with brass compression gland and Aluminium lugs for followingsize of PVC sheathed /XLPE aluminium conductor cable of 1.1kv grade as required. 4 X 6 sq.mm. (od307104/ 2020_ 2021) |
| 30 | Supplying and fixing of 50 mm dia x1 .00 meter long GI pipe (medium class) bracket for mounting of Flood lights on pole including welding the pipe to the required shape ,flat iron clamps with nuts ,bolts and washer, painting the GI pipe with primer and finish paint etc. as required. (od308101/2020_2021) |
| 31 | supplying, conveying and Laying of 1.5 sq.mm un armoured 3core flexible copper cable.(Laying throughthe GI pole for flood light). (od309229/2020_2021) |
| 32 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KVgrade of following size on wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle). (7.7.1) |
| 33 | Fabricating, Supply and installing MCCB type interior panel board of415v,50Hz dust and vermin proof using 16SWG sheet steel construction on angle iron frame work, the board shall be fabricated incorporating incoming and outgoing MCCBs with thermal magnetic release having adjustable OL &SC and of suitable rated ultimate short circuit breaking capacity (Icu=25/35kA) Cable entry wire way boxes, bus bars and interconnections are to be done with rigid copper conductors with sleeves and marked with RYB colour including supply and fixing 3Nos,poilet lamp with toggle switch, multifunction meter (V,A,F,KWH) with danger notice, spreaders for each MCCB, identification marks for switches and giving earthing etc complete . The board shall be painted 2 coats of enamelled paint over one coats of metal primer consisting the following: 1)1No.125A 4 pole,36 kA MCCB, 2) 3Nos 63 A 25kA 4pole MCCB , 3)1 No .200A TPN 415V Aluminium bus bar supporting 0n SMC Insulators with heat shrinking RYB coloured sleeves. (od311314/2020_ 2021) |
| 34 | Dismantling the damaged pedestal type panel board and reconnecting the all existing connections to existing new VDB. The existing new VDB incoming cable connection change to new MSB and VDB connection taken at new MSB. Dismantled material should be return to the electrical store. (od312176/2020_2021) |
| 35 | Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing asrequired. (5.17) |
| 36 | Supplying 9W glass type LED Bulk head light fitting. (od312611/2020_2021) |
| 37 | Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required. (5.20) |
| 38 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole. (2.10.4) |
AI Tender Summary
Tender Timeline
Aug 26, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 10, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender