Providing Ie In 82 Mile Phc Building Conceal Type Including Kitchen Morgue Garage Generator With Driver Room Building Surface Type Providing Ie In 82 Mile Phc Building Conceal Type Including Kitchen Morgue Garage Generator With Driver Room Building Surfac
Tender Value
13.69 Lakhs
Estimated cost
Bid Submission
13 Sep 2021
0 days left
EMD
13699
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
82 MILE PHC → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing Ie In 82 Mile Phc Building Conceal Type Including Kitchen Morgue Garage Generator With Driver Room Building Surface Type Providing Ie In 82 Mile Phc Building Conceal Type Including Kitchen Morgue Garage Generator With Driver Room Building Surface Type
BOQ
| Sl. No. | Item Description |
| 1 | Wiring for light/ fan/ exhaust fan/ call bell point with 2x1.5 sq. mm PVC insulated copper conductor cable (FR) in PVC conduit (medium gauge) recessed in slab/ wall complete with 6/10 amps modular type switch, cover plate, GI box including necessary connection etc. as required:-(As per TSR-2021, Sl. No-401) |
| 2 | Providing and fixing of 3 pin 6/10 amps plug point withmodulartype 6/10ampsswitch andsocketincludingconnectionwith 2 x 1.5 sq. mm PVC insulated Copper conductor cable (FR) onmodular concealedswitch board with cover plate earthing the 3rd pin etc. as required. (As per TSR-2021 Sl. No.403) |
| 3 | Providing and fixing of 3/6 pin 16 / 20 amps plug point withmodulartype 16/20ampsswitch andsocketincludingconnectionwith 2 x 2.5 sq. mm PVC insulated Copper conductor cable (FR) onmodular concealedswitch board with cover plate earthing the 3rd pin etc. as required:- (As per TSR-2021 Sl. No.404) |
| 4 | Supplying and fixing of the following electrical accessories including necessary connection etc. as required.(As per TSR-2021, Sl. No.604) |
| 5 | Ding dong call bell |
| 6 | Musical call bell |
| 7 | Wiring for Circuit/Sub-main wiring with the following sizes PVC insulated copper conductor cable (FR) in PVC conduit (medium gauge) recessed in slab/ wall etc. as required:- (As per TSR-2021, Sl. No.405) |
| 8 | 2 X 1.5 + 1 X 1.5 sq mm(Green Colour) |
| 9 | 2 X 2.5 + 1 X 1.5 sq mm(Green Colour) |
| 10 | 2 X 6+ 1 X 2.5 sq mm(Green Colour) |
| 11 | 4 X 10+ 2 X 4 sq mm(Green Colour) |
| 12 | Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick i/c accessories and providing masonry enclosure withCIcover plate Size 12\"x 12\" having locking arrangement, alongwith20 mm dia (medium gauge) watering pipe including CC work etc as required:-(As per TSR-2021, Sl. No.703) |
| 13 | Extra for using salt (12 kg) and charcoal (96kg) for plate earth electrode as required.(As per TSR-2021,Sl. No.705) |
| 14 | Supply and fixing of 25 x 3mm copper strip on wall/ floor of the building for horizontal/ vertical run including necessary spacers and porcelain insulators at regular intervals:-(As per TSR-2021 Sl. No.714) |
| 15 | Earthing with 40 mm dia G.I. Earth pipe (medium gauge) 4.5 m. long complete with masonry enclosure on top CI cover plate size 12\"x 12\" having locking arrangement including CC work, holes on earth pipe etc. as required:-(As per TSR-2021 Sl.No.701) |
| 16 | Earthing with 40 mm dia G.I earth pipe (medium gauge) ( above 4.5m long normal size) i/c necessary hole etc as required:-( As per TSR-2021 Sl.no 711) |
| 17 | Extra for using salt (5 kg) and charcoal (46kg) for pipe earth electrode as required:- ( As per TSR-2021 Sl.no 702) |
| 18 | Providng and laying 15mm dia(medium gauge) G.I. pipe for drawing of4.06mm (8SWG) dia G.I./ Copper wire forearth connection from earth electrodes etc as required:-( As per TSR-2021 Sl.no 710) |
| 19 | Proving and fixing / drawing of 4.06 mm dia (8 SWG) G.I. wire on surface or in existing G.I/ PVC/ Polythene pipe for loop earthing as required:-( As per TSR-2021 Sl.no 706) |
| 20 | Supplying & fixing of 1200 mm sweep white color AC ceilingfan capacitor typedouble ball bearing complete with 300 mm down rod,canopies,shackles, 3nos blades, including wiring the down rod with 2x1.5 sqmm PVC insulated Copper conductor cable(FR)(ISI marked, BEE 1star/minimum service value 4.0 m3/min/W) : -(As per TSR-2021 Sl. No.802) |
| 21 | Supplying and fixing of the following modular accessories including necessary connection etc. as required:-(As per TSR-2021 Sl. No.609) |
| 22 | 5 step fan regulator (2M):- |
| 23 | Supplying & installation of 400 mm sweep AC wall mounting fan with plastic blade including connection etc as required:-(As per TSR-2021 Sl. No.811) |
| 24 | Supplying & installation of 225/230 mm sweep metalic body exhaust fan including connection etc as required:-(As per TSR-2021 Sl. No.816) |
| 25 | Supplying & installation of 300 mm sweep 900 rpm metalic body exhaust fan including connection etc as required (ISI marked):-(As per TSR-2021 Sl. No.818) |
| 26 | Supplying & installation of shutter for 225/230/300 mm sweep metalic body exhaust fan in the existing hole as required:-(As per TSR-2021 Sl. No.821) |
| 27 | Making different sizes of hole in the wall for fixing of exhaust fan including finishing the same with cement plastering and painting etc as required:-(As per TSR-2021 Sl. No.831) |
| 28 | Supplying and fixing of following surface/recess mounted LED luminaries in powder coated die cast housing complete with high efficiency polycarbonate diffuser and necessary connection etc.as required (with 50000 burning hours and minimum lumen output of 100 lm/watt):-(As per TSR-2021 Sl. No.1101) |
| 29 | Surface mounted round/Square shaped 12 watt LED downlight with integral driver and high quality polycarbonate diffuser:- |
| 30 | Supplying and fixing of following luminaries complete withnecesaary accessories and connection etc. as required (Commercial lighting fixtures with 50,000 burning hours):-(As per TSR-2021 Sl. No.1001,a,b) |
| 31 | Box type single FTL fittings of CRCA steel sheet housing complete with 36/40 W FTL,electronic ballast and high quality reflector cover : - |
| 32 | Box type double FTL fittings of CRCA steel sheet housing complete with 2 nos. 36/40 W FTL,electronic ballast and high quality reflector cover: - |
| 33 | Supplying and fixing of following outdoor LED luminaries in powder coated die cast housing complete with heat resistant tempered glass/diffuser including necessary connection etc. as required (50000 burning hours and minimum lumen output of 100 lm/watt):-(As per TSR 2021-sl no 1102,d) |
| 34 | 45 watt LED street light fixture with integral driver and secondary lens (IP 66):- |
| 35 | Supplying and laying of the following sizes XLPE insulated PVC sheathed aluminium conductor armoured cable with necessary connection etc as required:-(As per TSR-2021 Sl. No.1301,e) |
| 36 | 3 core 4 sq mm |
| 37 | Drawing of armoured/un-armoured cable with proper saddeling etc as required:-(As per TSR-2021 Sl. No.1511) |
| 38 | Supplying & fixing of G.I. pipe (medium gauge) bracket fabricated at suitable angle for fixing of outdoor light on wall/ RCC base with necessary MS clamp, nut, bolt etc as required:-(As per TSR-2021 Sl. No.1501) |
| 39 | 40 mm dia |
| 40 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering,shuttering, finishing and reinforcement- 1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brick aggregate 20 mm nominal size):-(As per TSR-2021 Sl. No.1519) |
| 41 | Supplying and installation of Switch disconnector fuse unit (main switch) of the following ratings with all accessories including necessary connection etc. as required:-(As per TSR-2021 Sl. No.1202,k,b) |
| 42 | 100 amps TPN 415 voltsfront handle cubical main switch (HRC):- |
| 43 | 32 amps 240 volts DP main switch (rewireable):- |
| 44 | Supplying and installation of change over switch of following ratings with enclosure including necessary connection etc. as required:-(As per TSR-2021 Sl. No.1204,d) |
| 45 | 63 amps FP on load change over switch (Front handle with enclosure):- |
| 46 | Supplying and installation of Bus bar chamber of the following ratings and sizes made of steel sheet enclosure with all accessories including necessary connection etc. as required:-(As per TSR-2021 Sl.No.1201,c,d ) |
| 47 | 100 amps 415 volts four strip Copper busbar chamber 4 ways of size (455mmx330mmx120mm):- |
| 48 | 63 amps 415 volts four strip Copper busbar chamber 6 ways of size (455mmx330mmx120mm):- |
| 49 | Supplying and installation of powder coated steel sheet enclosure (MCB DB) suitable for 240/415 volts MCB/Isolator/RCCB (SP/SPN/DP/TP/TPN/FP) complete with necessary bus bar, neutral link, din rail, earth bar etc i/c connectionas required.(As per TSR-2021 Sl. No.1208,a,e,i):- |
| 50 | 2 way SPN MCB DB (single door):- |
| 51 | (2+10) / 12way SPN MCB DB (double door):- |
| 52 | (2+4) / 6way SPN MCB DB (double door):- |
| 53 | Supplying & installation of 10 KA breaking capacity, B/C curve MCB of following ratings in the existing MCB DB including connectionas required:(As per TSR-2021 Sl.No.1215-a,) |
| 54 | 6 to 32 amps SP MCB:- |
| 55 | Supplying & installation of isolators of following ratings in the existing MCB DB including connection etc as required:-(As per TSR-2021 Sl.No.1217-a,) |
| 56 | 40 amps DP isolator:- |
| 57 | Supplying and fixing of the following modular accessories including necessary connection etc. as required:-(As per TSR-2021 Sl.No.609,e,d,p) |
| 58 | 32 amps one way DP switch (2M):- |
| 59 | Bell push SP (1M) :- |
| 60 | Blank plate (1M):- |
| 61 | Supplying and fixing of the following electrical accessories including necessary connection etc. as required:-(As per TSR-2021 Sl. No.604,ac) |
| 62 | 3mm thick bakelite sheet:- |
| 63 | Supplyingandinstallationof secure zone 4 kg ABCpowder fire Extinguisher gross weight 6.38 kg, empty weight 2.38 kg, can height 372 mm, diameter 150 mm, discharge time minimum 13 seconds , discharge mechanism - squeeze grip type range minimum 2 meters applicable on class A,B,C and electrically started fire, A rating- 2A, raring-55B, can contrast- mig welded,valve construction- forging & machining, external coating of can..epoxy polyester powder coating, sheet metal thickness. 1.60mm, conforms to BIS standards, 5 years warranty(make. ceasefire/secure/fireshield) (Rateasperagreement no 74/EE/IED/AMB/2020-21):- |
| 64 | Supplying and fixing of Copper terminal ends (LUGS) - long barrel of following sizes:-(As per TSR-2021. Sl. No.1402) |
| 65 | 4 Sq mm :- |
| 66 | 6 Sq mm :- |
| 67 | 10 Sq mm :- |
| 68 | Wiring for light / fan / exhaust fan / call bell point with 2 x1.5 sq. mm pvc insulated Copper conductor cable (FR) in pvc casing and capping complete with wooden switch board with bakelite cover and piano type switch including connection etc as required:-(As per TSR-2021. Sl. No.101) |
| 69 | Short Point :- |
| 70 | Medium Point :- |
| 71 | Long Point :- |
| 72 | Providing and fixing of 3 pin 5/6 amps plug point withpianotype 5/6ampsswitch andsocketincludingconnectionwith 2x1.5 sq. mm PVC insulated Copper conductor cable (FR) onswitch board, earthing the 3rd pin etc. as required:-(As per TSR-2021. Sl. No.103) |
| 73 | Providing and fixing of 3/6 pin15/16 amps plug point withpianotype 15/16ampsswitch andsocketincludingconnectionwith 2x2.5 sq. mm PVC insulated Copper conductor cable (FR) onswitch board, earthing the 3rd pin etc. as required:-(As per TSR-2021. Sl. No.104) |
| 74 | Wiring for circuit /Sub-main with following sizes PVC insulated copper conductor cable (FR) in PVC casing and capping etc. as required.(As per TSR-2021. Sl. No.205) |
| 75 | 2 X 1.5 sq mm |
| 76 | 2 X 2.5 sq mm |
| 77 | 2 X 4 sq mm |
| 78 | Wiring for Circuit/Sub-main with the following sizes of PVC insulated Copper conductor cable (FR) in existing PVC casing capping/ conduit in recess/surface including connection etc. as required:-(As per TSR-2021. Sl. No.503) |
| 79 | 1 X 1.5 sq mm |
AI Tender Summary
Tender Timeline
Aug 25, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedSep 13, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 14, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender