Prov. Fhtc And Improvement Of Wss Brua And Wss Chunang In Gp Brua Tehsil Sangla Distt. Kinnaur H.P. Co Rcc Intake Chamber, Storage Tank 45000 Ltrs Cap, Laying Jointing And Testing Of Gms Tubes Of Various Dia At Various Rds
Tender Value
23.41 Lakhs
Estimated cost
Bid Submission
09 Sep 2021
0 days left
EMD
42619
Bank guarantee accepted
Document Fee
400
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Reckong Peo → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Prov. Fhtc And Improvement Of Wss Brua And Wss Chunang In Gp Brua Tehsil Sangla Distt. Kinnaur H.P. Co Rcc Intake Chamber, Storage Tank 45000 Ltrs Cap, Laying Jointing And Testing Of Gms Tubes Of Various Dia At Various Rds
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundationsin all kinds of soil such as pick work ,jumper work, blasting hard or soft rock chiseling where blasting is prohibited or saturated soil , lift upto 1.50 mtr stacking the excavated soil not more than 3.00 mtr clear from the edge of the excavation and then returning the stacked soil in 15 cm layers when required into plinth sides of foundation consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer-in-Charge. |
| 2 | Boulder /stone filling hand packed tightly under floor with in all leads and lifts. |
| 3 | Providing and laying cement concrete 1:4:8 (1 cment:4 sand: 8 graded stone agg. 40mm Nominal size) and curring complete excluding the cost of form work in foundation & plinth within all leads and lifts complete. |
| 4 | Providing & Laying Cement concrete work 1:1.5:3 (1 cement : 1.5 sand :3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : |
| 5 | Foundation footings bases of columns and the like and mass concrete. |
| 6 | Vertical walls (any thickness attached pillesters, buttresses plinth and string courses etc. form top of foundation and plinth. |
| 7 | P/L RCC work 1:2;4 (1 cement :2 sand : 4 graded stone agg. 20mm N/s) and curring complete excluding the cost of form work and reinfocement for reinforced work in:- suspended floor, roofs, landing shelves and their support balconies beams, griders. bressumers and cantilever within all lead and lifts. |
| 8 | Providing tor steel reinforcement for RCC work i/c bending, binding and placing in position complete upto floor two level (tor steel) |
| 9 | Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in: |
| 10 | a) Vertical surfaces such as walls (any thickness) partitions and the like including attached pillaster buttresses, plinth and string courses and the like with in all leads and lifts. |
| 11 | b) Flat surfaces such as soffits of suspended floors, roofs, landings and the like. Lloors etc. upto 200mm. In thickness with in all leads and lifts. |
| 12 | Providing no fine cement concrete 1:3 ( 1 cement : 3 Agg. 20mm nominal size)in all leads & lifts |
| 13 | Providing and placing filtering media in all leads & lifts. |
| 14 | Course sand 3-6mm |
| 15 | Bottom layer 50- 75 mm |
| 16 | Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint. In gratings framed guard bars, ladders, railling,brackets and similar works. |
| 17 | Laying & Jointing in treanches GMS tube (MG) and tube fitting (earth work in trenches to be measured and paid seprately) as per the direction of the Engineer-in-Charge including all fittings complete. |
| 18 | 15mm dia |
| 19 | 20mm dia |
| 20 | 25mm dia |
| 21 | 32mm dia |
| 22 | 40mm dia |
| 23 | 50mm dia |
| 24 | 65mm dia |
| 25 | Providing and Fixing Gun Metal peet valve with hand wheel (Superior Quality) complete. |
| 26 | 50mm dia |
| 27 | 65mmdia |
AI Tender Summary
Tender Timeline
Aug 25, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedSep 09, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 10, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender