Military Engineer Services-MES has published Repair Maint Of Certain Summer Appliances Repair Maint Of Dg Set Solar Water Heater And Connected Works At Si Lines And Repair Maint Of Pump Sets Bore Wells And Allied Works At Bairagarh Under Ge Bhopal Repair Maint Of Certain Summer Appliances Repair Mai. Submission Date for this Tender is 12-10-2021. Diesel Generators Tenders in BHOPAL Madhya Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 07-Sep-2021 | DATE POSTPONE | Date | 23-09-2021 |
| 2 | 15-Sep-2021 | REVISED BOQ | BOQ | 23-09-2021 |
| 3 | 23-Sep-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 30-09-2021 |
| 4 | 27-Sep-2021 | revised date | Date | 11-10-2021 |
| 5 | 11-Oct-2021 | Due Date Extended | Admin Corrigendum Date Extend | 12-10-2021 |
| Sl. No. | Item Description |
| 1 | Note: This work comprises of (i) REPAIR/MAINT OF PUMP SETS, BORE WELLS AND ALLIED WORKS AT BAIRAGARH (ii) REPAIR/MAINT OF CERTAIN SUMMER APPLIANCES AT SI LINES (iii) REPAIR/ MAINT OF DG SET, SOLAR WATER HEATER AND CONNECTED WORKS AT SI LINES The qty of individual part shall not vary beyond deviation limit specified in tender. |
| 2 | REPAIR AND MAINT OF PUMP SETS, BORE WELLS, AND ALLIED WORKS AT BAIRAGARH |
| 3 | M&L for taking out column pipe any type & capacity and any type from existing bore well including unserviceable submersible pumping set complete carefully without damaging the pump setincluding connecting parts and lowering the same after repair including provision of suitable size of nut & bolts with washer and suitable packing for column pipes and connection of submersible cable complete all as specified and directed. NOTE: (i) Length of column pipe in borewell shall be measured for the purpose of payment. (ii) Chain pully block , clamps, etc shall be provided by the contractor. (iii) Necessary safety pracaution will be responsibility of the contractor. |
| 4 | Disconnection and dismantling of centrifugal /submersible /monoblock /pressure pump/ non clog motor pump /VT pump set assy, etc from foundation located at variuos places under AGEE/M Bairagarh; transportation of the pump to workshop for repairs; dismantling and opening of the pump assy for checking out defects; taking out shaft from pump and carrying out lathe work on shaft for checking and making straightness; taking out of old worn out brass impeller; material and labour for filling material on worn out parts, grinding, polishing and carrying out complete lathe work, refixing of shaft and checking its smooth functioning and balancing and reassembling of pump; transporation back to site as directed by Engineer-in-charge and fixing to its existing /new location with new nut, bolt, washers, etc as required and making electrical connections and testingcompleteall as specified & directed. NOTE:- (i) Spares/parts shall be paid under relevent item here-in-after under as supply only. (ii) Cost of Minor spare parts; which are not included in subsequent items given here-in after but are required for making the motor functional is deemed to be included in the quoted rate. |
| 5 | 240 HP motor |
| 6 | 50 to 65 HP motor |
| 7 | 30 to45 HP motor |
| 8 | 10 to 25 HP motor |
| 9 | 5 to 7.5 HP motor |
| 10 | 3 HP motor |
| 11 | 1 /1.5 / 2 HP motor |
| 12 | Dismantling of submersible motor any type and taking out unserviceable spares and burnt copper winding wire and M&L for rewinding of submersible motor withinsulated copper winding wire including sleeves (as per manufacturers specification) and replacement of worn out parts, including grinding & polishing of rotor sleeves and refixing, testingand transport charges completeall as specified & directed. NOTE:- (i) Spares/parts shall be paid under relevent item here-in-after under as supply only. (ii) Cost of Minor spare parts; which are not included in subsequent items given herein-after but are required for making the making the motor functional is deemed to be included in the quoted rate. |
| 13 | 5 HP to 10 HP Motor |
| 14 | 11 HP to 20 HP Motor |
| 15 | 21 HP to 30 HP Motor |
| 16 | Supply only the following parts suitable for submersible pump and motor of capacity 5 HP to 10 HP of make as per original manufacturers specification completeall as specified & directed. NOTE:- Cost of Minor spare parts; which are not listed below but are required for making the motor functional is deemed to be included in the quoted rate of respective item. |
| 17 | Bowl bush |
| 18 | Impeller |
| 19 | Neck ring |
| 20 | Shaft sleeve |
| 21 | Pump shaft |
| 22 | Coupling |
| 23 | Coupling key |
| 24 | Impeller key |
| 25 | Stud with nuts |
| 26 | Thrust bearing |
| 27 | Lower housing bush |
| 28 | Upper housing bush |
| 29 | Rotor shaft sleave |
| 30 | Drain plug |
| 31 | Water seal |
| 32 | CI Bowl |
| 33 | Rotor shaft |
| 34 | Bearing suitable for pump set |
| 35 | Supply only the following parts suitable for submersible pump and motor of capacity 11 HP to 20 HP of make as per original manufacturers specification completeall as specified & directed. NOTE:- Cost of Minor spare parts; which are not listed below but are required for making the motor functional is deemed to be included in the quoted basic rate of respective item. |
| 36 | Bowl bush |
| 37 | Impeller |
| 38 | Neck ring |
| 39 | Shaft sleeve |
| 40 | Pump shaft |
| 41 | Coupling |
| 42 | Coupling key |
| 43 | Impeller key |
| 44 | Stud with nuts |
| 45 | Thrust bearing |
| 46 | Lower housing bush |
| 47 | Upper housing bush |
| 48 | Rotor shaft sleave |
| 49 | Drain plug |
| 50 | Water seal |
| 51 | CI Bowl |
| 52 | Rotor shaft |
| 53 | Bearing suitable for pump set |
| 54 | Supply only the following parts suitable for submersible pump and motor of capacity 21 HP to 30 HP of make as per original manufacturers specification completeall as specified & directed. NOTE:- Cost of Minor spare parts; which are not listed below but are required for making the motor functional is deemed to be included in the quoted basic rate of respective item. |
| 55 | Bowl bush |
| 56 | Impeller |
| 57 | Neck ring |
| 58 | Shaft sleeve |
| 59 | Pump shaft |
| 60 | Coupling |
| 61 | Coupling key |
| 62 | Impeller key |
| 63 | Stud with nuts |
| 64 | Thrust bearing |
| 65 | Lower housing bush |
| 66 | Upper housing bush |
| 67 | Rotor shaft sleave |
| 68 | Drain plug |
| 69 | Water seal |
| 70 | CI Bowl |
| 71 | Rotor shaft |
| 72 | Bearing suitable for pump set |
| 73 | Dismantling of Centrifugal/ Monoblock/ Pressure motors, etc any type and taking out unserviceable spares and burnt copper binding wire and M&L for rewinding of motor withinsulated copper winding wire including sleeves (as per manufacturers specification) and replacement of worn out parts, including grinding & polishing of rotor sleeves and refixing, testingand transport charges completeall as specified & directed. NOTE:- (i) Spares/parts shall be paid under relevent item here-in-after under as supply only. (ii) Cost of Minor spare parts; which are not included in subsequent items given herein-after but are required for making the making the motor functional is deemed to be included in the quoted basic rate. |
| 74 | 240 HP Motor |
| 75 | 50 to 65 HP Motor |
| 76 | 30 to 45 HP Motor |
| 77 | 10 to 25 HP Motor |
| 78 | 5 to 7.5 HP Motor |
| 79 | 3 HP Motor |
| 80 | 1 / 1.5 / 2 HP Motor |
| 81 | Supply only the following parts suitable for centrigual pump and motor of capacity 240 HP of make as per original manufacturers specification completeall as specified & directed. NOTE:- Cost of Minor spare parts; which are not listed below but are required for making the making the motor functional is deemed to be included in the quoted basic rate of respective item. |
| 82 | Bowl bush |
| 83 | Impeller |
| 84 | Neck ring |
| 85 | Shaft sleeve |
| 86 | Pump shaft |
| 87 | Coupling |
| 88 | Coupling key |
| 89 | Impeller key |
| 90 | Stud with nuts |
| 91 | Thrust bearing |
| 92 | Lower housing bush |
| 93 | Upper housing bush |
| 94 | Rotor shaft sleave |
| 95 | Drain plug |
| 96 | Water seal |
| 97 | CI Bowl |
| 98 | Rotor Shaft |
| 99 | Bearing suitable for pump set |
| 100 | Supply only the following parts suitable for Centrifugal/ Monoblock/ Pressure motors, etc and motor of capacity 50 to 65 HP of make as per original manufacturers specification completeall as specified & directed. NOTE:- Cost of Minor spare parts; which are not listed below but are required for making the making the motor functional is deemed to be included in the quoted basic rate of respective item. |
| 101 | Bowl bush |
| 102 | Impeller |
| 103 | Neck ring |
| 104 | Shaft sleeve |
| 105 | Pump shaft |
| 106 | Coupling |
| 107 | Coupling key |
| 108 | Impeller key |
| 109 | Stud with nuts |
| 110 | Thrust bearing |
| 111 | Lower housing bush |
| 112 | Upper housing bush |
| 113 | Rotor shaft sleave |
| 114 | Drain plug |
| 115 | Water seal |
| 116 | CI Bowl |
| 117 | Rotor Shaft |
| 118 | Bearing suitable for pump set |
| 119 | Supply only the following parts suitable for Centrifugal/ Monoblock/ Pressure motors, etc and motor of capacity 30 to 45 HP of make as per original manufacturers specification completeall as specified & directed. NOTE:- Cost of Minor spare parts; which are not listed below but are required for making the making the motor functional is deemed to be included in the quoted basic rate of respective item. |
| 120 | Bowl bush |
| 121 | Impeller |
| 122 | Neck ring |
| 123 | Shaft sleeve |
| 124 | Pump shaft |
| 125 | Coupling |
| 126 | Coupling key |
| 127 | Impeller key |
| 128 | Stud with nuts |
| 129 | Thrust bearing |
| 130 | Lower housing bush |
| 131 | Upper housing bush |
| 132 | Rotor shaft sleave |
| 133 | Drain plug |
| 134 | Water seal |
| 135 | CI Bowl |
| 136 | Rotor Shaft |
| 137 | Bearing suitable for pump set |
| 138 | Supply only the following parts suitable for Centrifugal/ Monoblock/ Pressure motors, etc and motor of capacity 10 to 25 HP of make as per original manufacturers specification completeall as specified & directed. NOTE:- Cost of Minor spare parts; which are not listed below but are required for making the making the motor functional is deemed to be included in the quoted basic rate of respective item |
| 139 | Bowl bush |
| 140 | Impeller |
| 141 | Neck ring |
| 142 | Shaft sleeve |
| 143 | Pump shaft |
| 144 | Coupling |
| 145 | Coupling key |
| 146 | Impeller key |
| 147 | Stud with nuts |
| 148 | Thrust bearing |
| 149 | Lower housing bush |
| 150 | Upper housing bush |
| 151 | Rotor shaft sleave |
| 152 | Drain plug |
| 153 | Water seal |
| 154 | CI Bowl |
| 155 | Rotor Shaft |
| 156 | Bearing suitable for pump set |
| 157 | Supply only the following parts suitable for Centrifugal/ Monoblock/ Pressure motors, etc and motor of capacity 1 HP to 10 HP of make as per original manufacturers specification completeall as specified & directed. NOTE:- Cost of Minor spare parts; which are not listed below but are required for making the making the motor functional is deemed to be included in the quoted basic rate of respective item. |
| 158 | Bowl bush |
| 159 | Impeller |
| 160 | Neck ring |
| 161 | Shaft sleeve |
| 162 | Pump shaft |
| 163 | Coupling |
| 164 | Coupling key |
| 165 | Impeller key |
| 166 | Stud with nuts |
| 167 | Thrust bearing |
| 168 | Lower housing bush |
| 169 | Upper housing bush |
| 170 | Rotor shaft sleave |
| 171 | Drain plug |
| 172 | Water seal |
| 173 | CI Bowl |
| 174 | Rotor Shaft |
| 175 | Dismantling of Vertical Turbine Pump Set of Capacity 75 HP and taking out unserviceable spares and burnt copper binding wire and M&L for rewinding of motor withinsulated copper winding wire including sleeves (as per manufacturers specification) and replacement of worn out parts, including grinding & polishing of rotor sleeves and refixing, testingand transport charges completeall as specified & directed. NOTE:- (i) Spares/parts shall be paid under relevent item here-in-after under as supply only. (ii) Cost of Minor spare parts; which are not included in subsequent items given herein-after but are required for making the making the motor functional is deemed to be included in the quoted basic rate. |
| 176 | Supply only the following parts suitable for Vertical Turbine Pump Set of Capacity 75 HP of make as per original manufacturers specification completeall as specified & directed. NOTE:- Cost of Minor spare parts; which are not listed below but are required for making the making the motor functional is deemed to be included in the quoted basic rate of respective item. |
| 177 | Bearing |
| 178 | Impeller |
| 179 | Ishpenter bush |
| 180 | Neck ring (04 Nos) |
| 181 | Shaft turning (04 Nos.) |
| 182 | Bush (04 Nos) |
| 183 | Rotor seal |
| 184 | Bowl bush |
| 185 | Neck ring |
| 186 | Shaft sleeve |
| 187 | Pump shaft |
| 188 | Coupling |
| 189 | Coupling key |
| 190 | Impeller key |
| 191 | Stud with nuts |
| 192 | Thrust bearing |
| 193 | Lower housing bush |
| 194 | Upper housing bush |
| 195 | Rotor shaft sleave |
| 196 | Drain plug |
| 197 | Water seal |
| 198 | CI Bowl |
| 199 | Rotor Shaft |
| 200 | M&L in replacement of star delta starter with sheet metal enclosure fixed in existing panel for FASD starterwith relay ranging 45 to 70 Amps, suitable for submersible pumping 3 Phase, 415 Volts, 50 Hz including single phase preventor complete all as specified and directed. [Make :- L&T (Cat No.SS94362) or equivalent in Legrand/C&S as approved by GE] |
| 201 | S&F in replacement power contactor, type ML-6, 3 pole, 415 V, 50Hz, 3 Phase with auxilary contacts 2 NO + 2 NC complete all as specified and directed. [Make :- L&T (Cat No -SS90921) or equivalent in Legrand/ Seimens/ Schinider as approved by GE] |
| 202 | S&F in replacement power contactor, type ML-4, 3 pole, 415V, 50Hz, 3 Phase, with auxilary contacts 2 NO + 2 NC complete all as specified and directed. [Make :- L&T (Cat No -SS90910) or equivalent in Legrand/ Seimens/ Schinider as approved by GE] |
| 203 | S&F in replacement power contactor, type ML-3, 3 pole, 415V, 50Hz, 3 Phase, with auxilary contacts 2 NO + 2 NC complete all as specified and directed. [Make :- L&T (Cat No -SS90910) or equivalent in Legrand/ Seimens/ Schinider as approved by GE] |
| 204 | S&F in replacement Thermal overload relay, type MN-5, with relay setting range (Amp)45-75, 415V, 50Hz, 3 Phase with built-in single phasing protection complete set and all as specified and directed. [Make :- L&T (Cat No -SS9413700JO) or equivalent in Legrand/ Seimens/ Schineder as approved by GE] |
| 205 | S&F in replacement Thermal overload relay, type MN-5, with relay setting range (Amp)30-50, 415V, 50Hz, 3 Phase with built-in single phasing protection complete set and all as specified and directed. [Make :- L&T (Cat No -SS9413700JO) or equivalent in Legrand/ Seimens/ Schineder as approved by GE] |
| 206 | S&F in replacement DOL Starter, 415 Volt, suitable for 7.5 HP motor with sheet steel enclosure, type MK-1, relay max range 13-22 amp complete all as specified and directed. [Make :- L&T (Cat No -SS96228) or equivalent in Legrand/ Seimens/Schinider as approved by GE] |
| 207 | S&F in replacement electronic timer for Star Delta Starter type, timing range 3-30 sec, 415 V, 50 Hz complete all as specified and directed. [Make :- L&T (Cat No -ST80328000) or equivalent in Legrand/ Seimens/ Schinider/ Havells as approved by GE] |
| 208 | S&F in replacement single phase preventor upto 75 HP, complete all as specified and directed. [Make :- Minilac/Havells/Surya as approved by GE] |
| 209 | M&L for painting of rising, delivery, overflow andbackwash out pipes of 250 mm, 450mm,150mm capacity atMain filter pump house of various Diameters with Blue, green, red and yellow colours respectively with synthetic enamel paint two coats including marking with arrows (directions of flow) and with white synthetic enamel paint over black (synthetic enamel paint) background of size (300 mm x 300 mm) all as specified and directed by Engineer in Charge. |
| 210 | M&L for Second class hard wood as in scantlings, clean sawn work complete all as specified and directed. |
| 211 | Dismantling timber scantlings 40 Sqcm and over in section, in any position complete all as specified and directed. |
| 212 | S&F in repair Submersible flat cable of size 10 sqmm x 3 core, including taking out old submersible cable, complete all as specified and directed. |
| 213 | S&F in repair Submersible flat cable of size 6 sqmm x 3 core, including taking out old submersible cable, complete all as specified and directed. |
| 214 | S&F in repair Submersible flat cable of size 4 sqmm x 3 core, including taking out old submersible cable, complete all as specified and directed. |
| 215 | S&F in repair GI pipe 50 mm dia High grade along with sockets, bends, tees and other fitting as required, complete all as specified and directed. [MAKE: TATA/ SURYA/ JINDAL/ PRAKASH] |
| 216 | S&F in replacement Starter of 60 HP, Star Delta type, including single phase preventer fittings, complete all as specified and directed. [Make :- L&T / Legrand/ Seimens/ Schinider/ Havells as approved by GE] |
| 217 | S&F in replacement Starter of 75 HP, Star Delta type, including single phase preventer fittings, complete all as specified and directed. [Make :- L&T / Legrand/ Seimens/ Schinider/ Havells as approved by GE] |
| 218 | S&F in replacement Starter of 240 HP, Star Delta type, including single phase preventer fittings, complete all as specified and directed. [Make :- L&T / Legrand/ Seimens/ Schinider/ Havells as approved by GE] |
| 219 | S&F in replacement Starter of 7.5 HP, Star Delta type, including single phase preventer fittings, complete all as specified and directed. [Make :- L&T / Legrand/ Seimens/ Schinider/ Havells as approved by GE] |
| 220 | S&F in replacement of MCCB 4 pole, 250 Amp 36 kA breaking capacity, including suitable size copper lugs and connected fittings, complete all as specified and directed. Make : Havells/Legrand/ L & T. |
| 221 | S&F in replacement of MCCB 4 pole, 200 Amp 36 kA breaking capacity, including suitable size copper lugs and connected fittings, complete all as specified and directed. Make : Havells/Legrand/ L & T. |
| 222 | S&F in replacement of MCCB 4 pole, 150 Amp 36 kA breaking capacity, including suitable size copper lugs and connected fittings, complete all as specified and directed. Make : Havells/Legrand/ L & T. |
| 223 | S&F in replacement of MCCB 4 pole, 100 Amp 36 kA breaking capacity, including suitable size copper lugs and connected fittings, complete all as specified and directed. Make : Havells/Legrand/ L & T. |
| 224 | S&F in replacement of MCCB 4 pole, 63 Amp 36 kA breaking capacity, including suitable size copper lugs and connected fittings, complete all as specified and directed. Make : Havells/Legrand/ L & T. |
| 225 | S&F in repair Copper cable of size 50 sqmm single core, 440 Volt 50 Hz, including taking out old cable, complete all as specified and directed. |
| 226 | S&F in repair Copper cable of size 35 sqmm single core, 440 Volt 50 Hz, including taking out old cable, complete all as specified and directed. |
| 227 | S&F in repair Copper cable of size 25 sqmm single core, 440 Volt 50 Hz, including taking out old cable, complete all as specified and directed. |
| 228 | S&F in repair Round copper lugs, 25mm dia, complete all as specified and directed. |
| 229 | S&F in repair Round copper lugs, 35mm dia, complete all as specified and directed. |
| 230 | S&F in repair Round copper lugs, 50mm dia, complete all as specified and directed. |
| 231 | M&L for cleaning of existing drainage system of Filter Pump House and cutting grass around 1 metre both sides, complete all as specified and directed. |
| 232 | REPAIR AND MAINT OF DG SETS AND SOLAR WATER HEATER AT SI LINES |
| 233 | M&L for Maintenance and servicing of DG Set of capacity160 KVAcomplete including following :- (a) Draining out engine oil from the chamber cleaningthe chamber thoroughly and refilling the oil pan with new engine oil to it’s required level, (b) Draining out of diesel from tank , cleaningthe tank thoroughlyand refilling the drained out diesel (c) Supply and replacement of fuel filter set (d) Supply and replcement of lubricating oil filter set (e) Supply and replacement By pass filter set,Head gasket kit (f) Checking & cleaning air filter (g) Check and topping up coolant level (h) Checking the starting batteries and filling with electrolyte/Distilled water to maintain the required specific gravity. Cleaning of Battery terminals & applying petroleum jelly to battery terminal posts & brass connectors (j) Checking and clearning exhaust system including removing of deposited carbon in exhuast pipe. (k) Adjustment /setting of V Belt and fan belts to the desired tension, tightening all the bolts and nuts to the required torque etc, cleaning the DG Set with accessories asprescribed by the manufacturer (l) Checking, cleaning and servicing of self starter, Alternator, sensors etc. (m) Testing of DG set at connected load all as directed by the Engr in charge. Note : (a) Engine oil, Fuel filter, oil filter, bypass filter, water filter, petroleum jelly, waste cloth, seal, gaskets etc are to be provided by the contractor and the cost is deemed to be included in quoted rate. (b) Coolant for topping up measured and paid saparetly (c) Engine oil /Spares/filters of make reccomended by OEM will only be used for servicing of DG set |
| 234 | M&L for Maintenance and servicing of DG Set of capacity 125 KVAcomplete including following :- (a) Draining out engine oil from the chamber cleaningthe chamber thoroughly and refilling the oil pan with new engine oil to it’s required level, (b) Draining out of diesel from tank , cleaningthe tank thoroughlyand refilling the drained out diesel (c) Supply and replacment of fuel filter set (d) Supply and replcement of lubricating oil filter set (e) Supply and replacement By pass filter set , Head gasket kit. (f) Checking & cleaning air filter (g) Check and topping up coolant level (h) Checking the starting batteries and filling with electrolyte/Distilled water to maintain the required specific gravity. Cleaning of Battery terminals & applying petroleum jelly to battery terminal posts & brass connectors (j) Checking and clearning exhaust system including removing of deposited carbon in exhuast pipe. (k) Adjustment /setting of V Belt and fan belts to the desired tension, tightening all the bolts and nuts to the required torque etc, cleaning the DG Set with accessories asprescribed by the manufacturer (l) Checking, cleaning and servicing of self starter, Alternator, sensors etc. (m) Testing of DG set at connected load all as directed by the Engr in charge. Note : (a) Engine oil, Fuel filter, oil filter, bypass filter, water filter, petroleum jelly, waste cloth, seal, gaskets etc are to be provided by the contractor and the cost is deemed to be included in quoted rate. (b) Coolent for topping up measured and paid saparetly (c) Engine oil /Spares/filters of make reccomended by OEM will only be used for servicing of DG set. |
| 235 | M&L for Maintenance and servicing of DG Set of capacity 100 /110 KVA complete including following :- (a) Draining out engine oil from the chamber cleaningthe chamber thoroughly and refilling the oil pan with new engine oil to it’s required level, (b) Draining out of diesel from tank , cleaningthe tank thoroughlyand refilling the drained out diesel (c) Supply and replacment of fuel filter set (d) Supply and replcement of lubricating oil filter set (e) Supply and replacement By pass filter set Head gasket kit (f) Checking & cleaning air filter (g) Check and topping up coolant level (h) Checking the starting batteries and filling with electrolyte/Distilled water to maintain the required specific gravity. Cleaning of Battery terminals & applying petroleum jelly to battery terminal posts & brass connectors (j) Checking and clearning exhaust system including removing of deposited carbon in exhuast pipe. (k) Adjustment /setting of V Belt and fan belts to the desired tension, tightening all the bolts and nuts to the required torque etc, cleaning the DG Set with accessories asprescribed by the manufacturer (l) Checking, cleaning and servicing of self starter, Alternator, sensors etc. (m) Testing of DG set at connected load all as directed by the Engr in charge. Note : (a) Engine oil, Fuel filter, oil filter, bypass filter, water filter, petroleum jelly, waste cloth, seal, gaskets etc are to be provided by the contractor and the cost is deemed to be included in quoted rate. (b) Coolent for topping up measured and paid saparetly (c) Engine oil /Spares/filters of make reccomended by OEM will only be used for servicing of DG set. |
| 236 | M&L for Maintenance and servicing of DG Set of capacity 62.5KVAcomplete including following :- (a) Draining out engine oil from the chamber cleaningthe chamber thoroughly and refilling the oil panwith new engine oil to it’s required level, (b) Draining out of diesel from tank , cleaningthe tank thoroughlyand refilling the drained out diesel (c) Supply and replacment of fuel filter set (d) Supply and replcement of lubricating oil filter set (e) Supply and replacement By pass filter set, Head gasket kit. (f) Checking & cleaning air filter (g) Check and topping up coolant level (h) Checking the starting batteries and filling with electrolyte/Distilled water to maintain the required specific gravity. Cleaning of Battery terminals & applying petroleum jelly to battery terminal posts & brass connectors (j) Checking and clearning exhaust system including removing of deposited carbon in exhuast pipe. (k) Adjustment /setting of V Belt and fan belts to the desired tension, tightening all the bolts and nuts to the required torque etc, cleaning the DG Set with accessories asprescribed by the manufacturer (l) Checking, cleaning and servicing of self starter, Alternator, sensors etc. (m) Testing of DG set at connected load all as directed by the Engr in charge. Note: (a) Engine oil, Fuel filter, oil filter, bypass filter, water filter, petroleum jelly, waste cloth, seal, gaskets etc are to be provided by the contractor and the cost is deemed to be included in quoted rate. (b) Coolent for topping up measured and paid saparetly (c) Engine oil /Spares/filters of make recommended by OEM will only be used for servicing of DG set. |
| 237 | M&L for Maintenance and servicing of DG Set of capacity 50KVA complete including following :- (a) Draining out engine oil from the chamber cleaningthe chamber thoroughly and refilling the oil pan with new engine oil to it’s required level, (b) Draining out of diesel from tank , cleaningthe tank thoroughlyand refilling the drained out diesel (c) Supply and replacment of fuel filter set (d) Supply and replcement of lubricating oil filter set (e) Supply and replacement By pass filter set,Head gasket kit. (f) Checking & cleaning air fillter (g) Check and topping up coolant level (h) Checking the starting batteries and filling with electrolyte/Distilled water to maintain the required specific gravity. Cleaning of Battery terminals & applying petroleum jelly to battery terminal posts & brass connectors (j) Checking and clearning exhaust system including removing of deposited carbon in exhuast pipe. (k) Adjustment /setting of V Belt and fan belts to the desired tension, tightening all the bolts and nuts to the required torque etc, cleaning the DG Set with accessories asprescribed by the manufacturer (l) Checking, cleaning and servicing of self starter, Alternator, sensors etc. (m) Testing of DG set at connected load all as directed by the Engr in charge. Note : (a) Engine oil, Fuel filter, oil filter, bypass filter, water filter, petroleum jelly, waste cloth, seal, gaskets etc are to be provided by the contractor and the cost is deemed to be included in quoted rate. (b) Coolent for topping up measured and paid saparetly (c) Engine oil /Spares/filters of make reccomended by OEM will only be used for servicing of DG set. |
| 238 | M&L for Maintenance and servicing of DG Set of capacity 30 KVA Make Cummincomplete including following :- (a) Draining out engine oil from the chamber cleaningthe chamber thoroughly and refilling the oil pan with new engine oil to it’s required level, (b) Draining out of diesel from tank , cleaningthe tank thoroughlyand refilling the drained out diesel (c) Supply and replacment of fuel filter set (d) Supply and replcement of lubricating oil filter set (e) Supply and replacement By pass filter set, Head gasket kit (f) Checking & cleaning air filter (g) Check and topping up coolant level (h) Checking the starting batteries and filling with electrolyte/Distilled water to maintain the required specific gravity. Cleaning of Battery terminals & applying petroleum jelly to battery terminal posts & brass connectors (j) Checking and clearning exhaust system including removing of deposited carbon in exhuast pipe. (k) Adjustment /setting of V Belt and fan belts to the desired tension, tightening all the bolts and nuts to the required torque etc, cleaning the DG Set with accessories asprescribed by the manufacturer (l) Checking, cleaning and servicing of self starter, Alternator, sensors etc. (m) Testing of DG set at connected load all as directed by the Engr in charge. Note : (a) Engine oil, Fuel filter, oil filter, bypass filter, water filter, petroleum jelly, waste cloth, seal, gaskets etc are to be provided by the contractor and the cost is deemed to be included in quoted rate. (b) Coolent for topping up measured and paid saparetly (c) Engine oil /Spares/filters of make reccomended by OEM will only be used for servicing of DG set. |
| 239 | Dismantling and taking down radiator assy from engine of any capacity for repairs including descaling, bracing as necessitated to plug leakages, M&L for transporting of the radiator of capacity 30-160 KVA and repair/maintenance to the radiator fins with the help of cleaning coil solution and cleaning to the radiator complete and repair to the leakage places by means of gas welding and including initial filling up coolant and refixing after repairs including replacement of worn out nut bolts, washers etc; and testing complete all as specified and directed. |
| 240 | Dismantling and removingFuel injection pump from DG set for repairs including re-calibration at authorised service centres, replacement of necessary spare parts such as delivery valves, plunger, "O" ring, springs etc and refixing, testing complete all as specified and directed of the following capacity:- |
| 241 | 160 KVA Capacity |
| 242 | 125 KVA capacity |
| 243 | 100/110 KVA capacity |
| 244 | 30/ 50 /62.5 KVA capacity |
| 245 | Replacementof Lubrication Oil 20 W 40. Make :- Castrol / Servo |
| 246 | M&L for reconditioning of unserviceable battery 12 V, 180 AH by replacing complete cells, PVC seperators, electrolyte, terminals and final sealing, recharging and testing complete all as specified and directed. |
| 247 | M&L in replecement of flame proof asbestos rope of specified dia wrapped around the exhaust pipe complete all as specified and directed. |
| 248 | Repair / Overhauling of self starter 12 / 24 Volt of any make / capacity including replacement of minor items such as carbon brushes, nuts, bolts etc; all as necessitated complete all as specified and directed. (All additional spares as required will be measured and paid seperately) |
| 249 | S&F inreplacement offollowing spares for self starter 12 / 24 V complete all as specified and directed:- |
| 250 | Field coil |
| 251 | Armature |
| 252 | Clutch assembly |
| 253 | S&F in replacement of battery lead, copper conductor 25 Sq mm, multi stranded, PVC insulated with suitable terminals at both ends complete all as specified and directed. |
| 254 | S&F in replacement of battery terminal of brass suitable for 12V, 180 AH battery complete all as specified and directed. |
| 255 | S&F in replacement of Battery charger with variable voltage and current setting suitable for charging 2 x 12 V Battery in sheets steel cabinet complete with Internal and external wiring, including all measuring and control accessories/ instruments complete all as specified and directed. |
| 256 | S&F in replacement of Fan belts as per sample for DG sets of following capacity:- |
| 257 | 160/125/110/ 100 KVA capacity |
| 258 | 30/50/62.5 KVA capacity |
| 259 | S&F in repairs fuel flexible pipe, Hose pipe heavy duty with check nuts for DG sets of any make/capacity, complete all as specified and directed. |
| 260 | Dismantling of alternator assy 30/50/62.5/100 KVA DG SETS and taking out regulating transformer carefully and rewinding of regulating transformer including refitting and testing complete all as specified and directed. |
| 261 | S&F in replacement ofoil pressure gauge as per sample complete all as specified and directed. |
| 262 | S&F in replacement oftemperature gauge as per sample complete all as specified and directed. |
| 263 | S&F in replacement of S.D. Valve for 100KVA DG set complete all as specified and directed. |
| 264 | S&F in replacement of Control Safety (Lub oil)for 100/110/160 KVA DG Set complete all as specified and directed. |
| 265 | S&F in replacement ofControl Safety (Water) Part No.for 100/110/160 KVADG set complete all as specified and directed. |
| 266 | S&F in replacement ofElectronic AVR assembly for 160/125/100 KVAcomplete all as specified and directed. |
| 267 | S&F in replacement of Electronic AVR assembly complete for 30/50/62.5KVA DG Set complete all as specified and directed. |
| 268 | S&F in replacement of Fan Blade for 160/125/110/100 KVA D G set complete all as specified and directed. Make; Mahindra /kirloskar/Greeves |
| 269 | S&F in replacement of Fan Blade for 30/50/62.5 KVA DG Set complete all as specified and directed. Make; Mahindra / Kirloskar |
| 270 | S&F in replacement of Oil Coolant additive concentrate pack of 10 Ltr suitable for DG Set complete all as specified and directed. |
| 271 | Supply only Distilled water in 5 ltr PVC Container complete all as specified and directed. |
| 272 | S&F in replacement of air filter outer & inner element for 160/125/110/100 KVA D G setcomplete all as specified and directed. Make : Kirloskar |
| 273 | S&F in replacement of air filter outer & inner element for 62.5/50/30 KVA D G setcomplete all as specified and directed. Make : Kirloskar |
| 274 | S&F in replacement of wiring loom as per sample complete all as specified and directed. |
| 275 | S&F in replacement of alternator cutout assembly suitable for 110/100KVA DG Set complete all as specified and directed. |
| 276 | S&F in replacement of alternator cutout assembly suitable for 30/50/62.5 KVA D G set complete all as specified and directed. Make; Mahendra / kirloskar |
| 277 | S&F in replacement of radiator assembly complete suitable for 30/50/62.5 KVA DG Set including all fixing and connecting material required at site complete all as specified and directed. |
| 278 | Supply only Battery 12V,180AHheavy duty complete suitable for DG sets complete all as specified and directed. Make :- Exide or equivalent |
| 279 | S&F in replacement of on load changeover switches 4 pole, 200 Amp complete all as specified and directed. Make - Havells/Indo Asian or equivalent |
| 280 | S&F in replacement of on load changeover switches 4 pole, 100 Amp complete all as specified and directed. Make - Havells/Indo Asian or equivalent |
| 281 | Supply& fixin replacement of MCCB 4 pole, 100 Amp 25kA breaking capacity complete all as specified and directed. Make Havells/Indo Asian /L&T. |
| 282 | Supply& fixin replacement of MCCB 4 pole, 200 Amp 35kA breaking capacity complete all as specified and directed. Make Havells/Indo Asian /L&T. |
| 283 | Supply& fixin replacement of MCCB 4 pole, 250 Amp 36 kA breaking capacity complete all as specified and directed. Make Havells/Indo Asian L & T. |
| 284 | Disconnection and taking out the unservisable turbo charger assembly of DG Set 125/100/62.5 KVA and taking to workshop, dismantling of turbo charger and replacement of repair kit reassembling and fixing back to engine and testing complete all as specified and directed. |
| 285 | Supply and Fix in replacement Exhaust Silencer Set of 100 Kva DG set along with all connecting item, welding, nut bolts, support clamp etc complete all as specified and directed . |
| 286 | M&L for repairing decarburizing, manifolds exhaust system of DG Set 110/100 KVA and connected items including replacement of necessary nuts bolts washers etc with necessary masonry work reqd for above complete all as specified and directed |
| 287 | S&F in replacement of VAF meter for 100 KVA DG setas per sample all as specified and directed. |
| 288 | M&L for repairing of Cylinder head parts of 100 KVA DG Set comprises of any leakage, nut and bolts complete all as specified and directed. |
| 289 | M&L for fixing of head gasket kit of DG Set of various capacity as per sample complete all as specified and directed. |
| 290 | Taking down Solar water heating system of 500 ltrs per day capacity from its position after disconnecting water connections, and re - fixing /reassembling in position after repair and testing, complete all as specified anddirected. Note:- (a) Rate quoted by the contractor deemed to have been included making good of missing Nuts, Bolts and washers, unions, sockets, flanges, screws etc to make it full functional, (b) Descalling/desludging, cleaning and washing of solar panels, hot water pipes, copper tubes, hot and cold water Tanks by using appropriate chemicals and reassembling the panels including necessary welding of collector fins as required, (c) Painting to staging, solar panel frames, hot water tank frame using one coat of synthetic enamel paint including necessary preparation of surfaces complete, (d) any other materials/Parts need to be replaced (to be measured and paid as supplied only). |
| 291 | All as per item No- 95.00 here in above but 200 Litre per day capacity |
| 292 | All as per item No-95.00 here in above but 100 Litre per day capacity |
| 293 | S&F in replacement ofStainless steel, Water heater tank, suitable for 100 LPDto match withexistng SS tank specifications, with all arrangements,completeall as specified and directed. Note: (i) Thickess of new tank to be matched with existing tank. (ii) The work should be executed at the top of 20m height building. |
| 294 | S&F in replacement of Stainless steel, Water heater tank suitable for 200 LPD , to match withexistng SS tank specifications, with all arrangements,completeall as specified and directed Note: (i) Thickess of new tank to be matched with existing tank. (ii) The work should be executed at the top of appx 20m height building. |
| 295 | S&Fin replacement ofStainless steel, Water heater tank suitable for 500 LPD, to match withexistng SS tank specifications, with all arrangements,completeall as specified and directed Note: (i) Thickess of new tank to be matched with existing tank. (ii) The work should be executed at the top of appx 20m height building. |
| 296 | S&F Solar energy collector panel made of Aluminium body with 5mm thick toughened glass complete with copper fins of capacity 200 litres per day as per existing make completeall as specified & directed. |
| 297 | S&F Solar energy collector panel gasket made out of Superior quality Rubber to make system air tight, dust and water proof complete of capacity 200 litres per day as per existing make completeall as specified and directed. |
| 298 | S&F compressed Glass wool (insulation materials) 48mm thick between Solar energy collector panel copper tubes frame and Aluminium body panel including securing it on panel by means of necessary adhesive completeall as specified and directed. |
| 299 | S&Frotational moulded,multilayer HDPE water storage tank of 500 ltrs capacity (Cylindrical vertical with closed top)ISI (IS 12701-1996) marked including PVC cover fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank niple, 20 mm dia brass ball valve with epoxy coated Aluminium rod with high density plastic float ballincluding fixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed. [MAKE:-SINTEX/ POLYWELL/ POLYCON/POLYPLAST] |
| 300 | S&Frotational moulded,multilayer HDPE water storage tank of 1000 ltrs capacity (Cylindrical vertical with closed top)ISI (IS 12701-1996) marked including PVC cover fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank niple, 20 mm dia brass ball valve with epoxy coated Aluminium rod with high density plastic float ballincluding fixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed. [MAKE:-SINTEX/ POLYWELL/ POLYCON/POLYPLAST] |
| 301 | S&F in repairs GI tubing medium grade for hot water pipe duly insulated with glass wool and aluminium cladding 20 mm bore with all fittings complete all as specified and diretced. [MAKE: TATA/ SURYA/ JINDAL/ PRAKASH] |
| 302 | S&F in repairs GI tubing medium grade for hot water pipe duly insulated with glass wool and aluminium cladding 25 mm bore with all fittingscomplete all as specified and diretced. [MAKE: TATA/ SURYA/ JINDAL/ PRAKASH] |
| 303 | Supply and filling anti freezing liquid in 20 ltr PVC can for solar water heater system complete all as specified and directed. |
| 304 | S&F GI pipe 25 mm dia Medium grade along with sockets, bends, tees and other fitting as required fixed to wall, floor, or ceiling complete all as specified and directed. [MAKE: TATA/ SURYA/ JINDAL/ PRAKASH] |
| 305 | S&F GI pipe 15mm dia Medium grade along with sockets, bends, tees and other fitting as required fixed to wall, floor, or ceiling complete all as specified and directed [MAKE: TATA/ SURYA/ JINDAL/ PRAKASH] |
| 306 | S&F in repairs toughened glass of size as per sample not less than 2 Sqm, 4mm thick of solar water heater panel of capacity 200 LPD complete all as specified and directed. |
| 307 | S&F in repairs toughened glass of size As per sample not less than 2 Sqm, 4mm thick of solar water heater panel of capacity 500 LPD complete all as specified and directed by Engr-in-Charge. |
| 308 | S&F in repairs Bib taps cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed. [MAKE:- Prayag (Cat No.8606) or equivalent inJAGUAR/MARC as approved by GE] |
| 309 | S&F in repairs Stop valves, cast copper alloy, screwed down, high pressure, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions 15mm bore complete all as specified and directed. [MAKE:- Prayag or equivalent inJAGUAR/MARC as approved by GE] |
| 310 | S&F in repairs Stop valves, cast copper alloy, screwed down, high pressure, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions 20mm bore complete all as specified and directed. [MAKE:- Prayag or equivalent inJAGUAR/MARC as approved by GE] |
| 311 | S&F in repairs Stop valves, cast copper alloy, screwed down, high pressure, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions 25mm bore complete all as specified and directed. [MAKE:- Prayag or equivalent inJAGUAR/MARC as approved by GE] |
| 312 | REPAIR AND MAINT OF CERTAIN SUMMER APPLIANCES AT SI LINES |
| 313 | Removing defective window/Split type air conditioner of any make and capacity from various locations fixed on walls, windows, etc and transporting to contractor workshop to carry out necessary repair as mentioned in respective item including cleaning the air conditioner with water and air pressure and to replace un-serviceable spares parts and re-fixing at various locations after repairing including testing on load at site complete all as specified and directed. NOTE:- All spares such as compressor, fan motor, relay, capacitor, over load, etc shall be measured and paid separately as supply only. |
| 314 | Removing unserviceable burnt sealed compressor from Air conditioner and fixing only new rotary / new sealed unit compressor of any capacity including necessary welding the same with existing refrigerant pipe, supply & charging refrigerant gas including testing complete all as specified and directed. Note:- (a)Sealed unit compressor shall be measured and paid separately as supply only (b)If any item required to made equipment functional like capillary tube, copper pipe, etc is deemed to be included in quoted unit rate. |
| 315 | Taking out window/split type Air conditioner of any make and capacity from position and cleaning the cooling coil & condenser coil with chemical base solution and water including servicing, oiling, greasing complete air conditioner, checking of electrical connections and re-fixing the same at its original position and testing complete all as specified and directed. NOTE:- All spares such as compressor, fan motor, relay, capacitor, over load, etc shall be measured and paid separately as supply only. |
| 316 | Supply only the folowing items for AC complete all as specified and directed. NOTE:- (a) The element of fixing is deemed to be included in respective Schedule ‘A’ Items. (b) If any item is not executed/consumed during the contract period the same shall be taken on ledger charge through Receipt Voucher if Required. (c) All replacement for failed/unserviceable compressor shall be guaranty of not less than 12 months for all such replacement. If any compressor is burnt during the guaranty period the same shall be replaced by contractor without taking any extra cost including supply & charging refrigerent gas. |
| 317 | New hermitically sealed / Rotary type compressor of Capacity 1.5 TR Make: Emerson /Tecumesh /Carrier /Hitachi / Blue Star or equivalent as approved by GE. |
| 318 | New hermitically sealed / Rotary type compressor of Capacity 2.0 TR Make: Emerson /Tecumesh /Carrier /Hitachi / Blue Star or equivalent as approved by GE. |
| 319 | FHP motor of capacity 1/5 to 1/18 HP, single phase, 920 RPM with starting and running capacitor suitable for window type AC. Make : AUE/Air master or equivalent as approved by GE. |
| 320 | Starting capacitor 80-100 MFD /100-120 MFD /120-150 MFD. Make: Keltronor/Epcos as per recommanded by manufacturer or equivalent as approved by GE. |
| 321 | Running Capacitor 45/50 MFD. Make : EPCOS or as per recommanded by manufacturer or equivalent as approved by GE. |
| 322 | Running Capacitor 36 MFD. Make : EPCOS or as per recommanded by manufacturer or equivalent as approved by GE. |
| 323 | Starting relay suitable for 1.0 /1.5 /2.0 TR compressorMake: HI-tech/Classic or as per recommanded by manufacturer or equivalent as approved by GE. |
| 324 | Rotary/Push type selector switch suitable for 1.5/2.0 TR window type AC. |
| 325 | Thermostat suitable for window / Split type A/C Make : INDFOSS/Godrej or as per recommanded by manufacturer or equivalent as approved by GE. |
| 326 | Cover outer of GI Sheet heavy duty with painted for window type AC of capacity 1.5 / 2.0 TR |
| 327 | Front grill for window type AC of any model all as required at site.Make: LG/ Lancer/ Blue star/ Fedder Lloyed/ Carrier |
| 328 | Condenser/cooling fan blade suitable for window type AC of any make & capacity. |
| 329 | Blower fan Motor suitable for split AC of any capacity & make. |
| 330 | Remote PCB for a split type AC of any capacity & make. |
| 331 | Blower both end coupling complete for split type AC of any make & Capacity all as required at site. Make: LG/ Lancer/ Blue star/ Fedder Lloyed/ Carrier |
| 332 | Cooling coil suitable for split type AC of any make & capacity. |
| 333 | Copper liquid line filter two / one way suitable for split AC of any capacity & make |
| 334 | Remote for Split AC as per sample. |
| 335 | PVC rounded 3 core, 4.0 sqmm copper work shop cable MAKE: POLYCAB/ PLAZZA/ V-MARC/ HAVELLS as approved by GE |
| 336 | S&F in replacement wiring loom for air conditioners complete all as directed by Engr-in-Charge. |
| 337 | S&F in replacement condenser/cooling coil suitable for split AC of any capacity & make including refrigerent gas, gas charging and welding, etc complete all as directed by Engr-in-Charge. |
| 338 | M&L for rewinding of stator of FHP motor of size 1/5 to 1/18 single phase 920 RPM with super quality of copper wire of existing sizewith varnishing, backing, testing including painting with one coat of synthetic enameled black paint complete all as directed by Engr-in-Charge. |
| 339 | Cutting of damaged tray from window type AC of capacity 1.5/2.0 TR and M&L for providing tray of exisiting shape and size including all necessary works such as welding, nuts, bolts, drilling, etc complete all as specified and directed. |
| 340 | Charging of refrigerant gas R-22 in window / split type air conditioners 1.5 / 2.0 TR at site/contractor’s workshop including all necessary work such as cost of refrigerant, welding to refrigerant pipe line, copper pipe, etc and testing complete all as specified and directed. |
| 341 | Taking down unserviceable voltage stabilizer of capacity 0.5 KVA to 5 KVAfrom site or MES store and and transporting to MES/ contractor workshop to carry out necessary repair as mentioned in respective item including replacement of un-serviceable spares parts and re-fixing at various locations after repairing or depositing to MES store yard including testing on load at site complete all as specified and directed. NOTE:- (a) If the transformer is found burnt, the same shall be re-winded in the workshop of contractor as directed. (b) All spares such as relay, PCB, transformeer, etc shall be measured and paid separately as supply only. |
| 342 | Supply only the folowing items for voltage stablizers complete all as specified and directed. NOTE:- (a) The element of fixing is deemed to be included in respective Schedule ‘A’ Items. (b) If any item is not executed/consumed during the contract period the same shall be taken on ledger charge through Receipt Voucher if Required. |
| 343 | Main relay 24 Volts, 25 Amps make as per OEM |
| 344 | Main Control circuit (PCB) |
| 345 | Output terminal, 32 Amps |
| 346 | Replacement of Censor Transformer make as per OEM |
| 347 | Voltmeter make as per OEM |
| 348 | Time delay 2-3 minutes, low voltage-180 volts AC and high voltage 260-Volt AC make as per OEM |
| 349 | Taking oul old burnt winding work and M&L for rewinding 5 KVA voltage stabliser with super quality of copper wire of existing sizewith varnishing, backing, testing including painting with one coat of synthetic enameled black paint complete all as directed by Engr-in-Charge. |
| 350 | Taking oul old burnt winding work and M&L for rewinding 4 KVA / 3 KVA voltage stabliser with super quality of copper wire of existing sizewith varnishing, backing, testing including painting with one coat of synthetic enameled black paint complete all as directed by Engr-in-Charge. |
| 351 | Taking oul old burnt winding work and M&L for rewinding 2 KVA / 1 KVA voltage stabliser with super quality of copper wire of existing sizewith varnishing, backing, testing including painting with one coat of synthetic enameled black paint complete all as directed by Engr-in-Charge. |
| 352 | S&F in repairs single pole and neutral enclosure with two pin and earth,plugand socket, single phase, 240 V with & including 1 No single pole MCB, capacity 20 amps, `C` charactristic, breaking cap 10 KA andindustial plug top complete all as specified and directed. [MAKE:-Legrand (Cat no. 607841) or equivalent in Siemens/ Schinder/L&T/ ABB/Havells] |
| 353 | Transporting refrigerator of any make and capacity from MES Store Yard/site to contactor’s workshop for carrying out necessary repair as mentioned in respective item including replacement of un-serviceable spares parts and re-fixing at various locations/MES store yard after repairing complete all as specified and directed. NOTE:- All spares such as compressor, fan motor, relay, capacitor, over load, etc shall be measured and paid separately as supply only. |
| 354 | Removing unserviceable burnt sealed compressor from refrigerator / Deep freezer and fixing only new sealed unit compressor of any capacity including necessary welding the same with existing refrigerant pipe, supply & charging refrigerant gas including testing complete all as specified and directed. Note:- (a) Sealed unit compressor shall be measured and paid separately as supply only. (b)If any item required to made equipment functional like capiliary, copper pipe, etc is deemed to be included in quoted unit rate. |
| 355 | Supply only the folowing items for refrigerator complete all as specified and directed. NOTE:- (a) The element of fixing is deemed to be included in respective Schedule ‘A’ Items. (b) If any item is not executed/consumed during the contract period the same shall be taken on ledger charge through Receipt Voucher if Required. (c) All replacement for failed/unserviceable compressor shall be guaranty of not less than 12 months for all such replacement. If any compressor is burnt during the guaranty period the same shall be replaced by contractor without taking any extra cost including supply & charging refrigerent gas. |
| 356 | New sealed compressor suitable for refrigerator / Deep freezer of capacity 165 Ltr/ 286 Ltr/ 310 Ltr. Make:Emerson/Whirl pool /LG / Blue star or equivalent as approved by GE. |
| 357 | Relay suitable for refrigerator/Deep freezer 165/286/310 Ltr capacity Make : INDFOSS/Godrej/Whirl pool or equivalent as approved by GE. |
| 358 | Over load suitable for refrigerator/Deep freezer 286/310 Make : INDFOSS/Godrej or equivalent as approved by GE. |
| 359 | Thermostate suitable for refrigerator/Deep freezer 165/286/310 Ltr capacity Make : INDFOSS/Godrej/Whirl pool or equivalent as approved by GE. |
| 360 | PVC freezer door suitable for refrigerator any make & capacity. |
| 361 | Chiller tray of any make and capacity suitable for refrigerator. |
| 362 | Vegetable tray suitable for refrigirator of any make & capacity. |
| 363 | Shelves suitable for refrigirator of any make & capacity. |
| 364 | Magnetic rubber door gasket suitable for refrigerator of any make & capacity. |
| 365 | Freezer temp controlfan motor suitable for refrigirator of any capacity and make as per original equipment manufacturer.. |
| 366 | Timer Box of suitable for Refrigirator double door of capacity200/ 310 Ltr and make as per original equipment manufacturer.. |
| 367 | PVC rounded 3 core, 2.5 Sqmm copper work shop cable.Make : National / Plaza / Polycab / Gloster |
| 368 | Freezer Box / Chiller Assembly complete with coil and chamber of any make and capacity suitable forrefrigerator. |
| 369 | Fan motor suitable for deep freezer of any capacity and make as per original equipment manufacturer.. |
| 370 | Charging of refrigerant gas R-22 in refrigerators/Deep Freezers any capacity at site or contractor’s workshop including all necessary work such as cost of refrigerant gas, welding to refrigerant pipe line etc and testing complete all as specified and directed. |
| 371 | Charging of refrigerant gas HFC-134 in refrigerators/Deep Freezers any capacity at site or contractor’s workshop including all necessary work such as cost of refrigerant gas, welding to refrigerant pipe line etc and testing complete all as specified and directed. |
| 372 | Taking down/out water cooler of any make and capacity from various locations; transporting to contractor’s workshop for carrying out repairs as mentioned in respective items of Schedule ‘A’ including transporting back after repair fixing at site re-connecting electrical & water connection & its re-testing on load complete all as specified and directed. |
| 373 | Removing unserviceable burnt sealed unit compressor from water coolers and fixing onlysealed unit compressor of any capacity including necessary welding the same with existing refrigerant pipe, supply & charging refrigerant gas including testing all as specified & directed by Engineer-in-Charge. Note:- (a) Sealed unit compressor shall be measured and paid separately as supply only. (b) If any item required to made equipment functional like capilliary, copper pipe, etc is deemed to be included in quoted unit rate. |
| 374 | Removing un-serviceable burnt FHP motor from water cooler and supply & fixing new FHP motor with suitable fan blade, single phase 1/8 to 1/35 HP, suitable for up to 150 Ltr capacity water coolers including testing complete all as specified and directed. |
| 375 | Taking out water cooler of any make and capacity from position and cleaning the complete condenser coil & storage tank with chemical base solution and soda water including servicing, oiling of FHP motor checking of electrical & water supply connection and re-fixing the same on its original position and testing complete all as specified and directed. |
| 376 | Supply only the folowing items for water cooler complete all as specified and directed. NOTE:- (a) The element of fixing is deemed to be included in respective Schedule ‘A’ Items. (b) If any item is not executed/consumed during the contract period the same shall be taken on ledger charge through Receipt Voucher if Required. (c) All replacement for failed/unserviceable compressor shall be guaranty of not less than 12 months for all such replacement. If any compressor is burnt during the guaranty period the same shall be replaced by contractor without taking any extra cost including supply & charging refrigerent gas. |
| 377 | New hermitically sealed unit compressor ofCapcity -150 Ltr. Make: Kirloskar/Tecumsch/Whirl pool / Lelvinator / Hitachi / Electrolux or equivalent as approved by GE. |
| 378 | New sealed unit compressor suitable for water cooler 40 / 80 Ltr. Make: Kirloskar/Tecumsch/ Whirl pool / kelvinator / Hitachi / Electrolux or equivalent as approved by GE. |
| 379 | New sealed unit compressor suitable for water cooler 60 / 120 Ltr. Make: Kirloskar/Tecumsch/ Whirl pool / kelvinator / Hitachi / Electrolux or equivalent as approved by GE. |
| 380 | Relay & OLP suitable for water cooler of any make & capacity. Make: HI-tech/Classic or as per recommanded by manufacturer or equivalent as approved by GE. |
| 381 | Thermostat switch suitable for water cooler Make : - Indfos or as per recommanded by manufacturer or equivalent as approved by GE. |
| 382 | Push taps, chromiuyim plated suitable for water cooler capacity up to 150 Ltr (as per sample) [MAKE: PRAYAG/MARC/PLUMBER as approved by GE] |
| 383 | Fan motor blade size 12" sweep suitable for FHP motor of water cooler |
| 384 | PVC flexible pipe transparent 15mm/20mm dia dia (as per sample) |
| 385 | PVC float valve 15 / 20 mm dia with rod & ball. [MAKE: PRAYAG/ POLYTUF] |
| 386 | Running Capacitor 4 MFD Make : EPCOS or as per recommanded by manufacturer or equivalent as approved by GE. |
| 387 | 3 pin plug top one way 5 Amp, 240V Make: Kinjal / Anchor / Cona |
| 388 | 3 pin plug top 15 Amp, 240V Make: Kinjal/ Anchor / Cona |
| 389 | Industrial type three pin metal clad socket of capacity 20 Amps 230 Volt single phase suitable for sheet metal enclouser.[MAKE:LEGRAND/L&T/C&S] |
| 390 | Industrial type three pin metal clad plug top of capacity 20 Amps 230 Volt single phase suitable for sheet metal enclouser.[MAKE:LEGRAND/L&T/C&S] |
| 391 | Charging of refrigerant gas R-22 in water coolers of any capacity at site or contractor’s workshop including all necessary work such as cost of refrigerant gas, welding to refrigerant pipe line, etc and testing complete all as specified and directed. |
| 392 | S&F in replacement condenser/cooling coil suitable for water cooler of any capacity & make including refrigerent gas, gas charging and welding, etc complete all as directed by Engr-in-Charge. |
| 393 | S&F in replacement switch socket combination outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, piano flush type,230 volt AC complete all as specified and as directed. [MAKE:-ANCHOR (PENTA series) or equivalent in LEADER/ CRABTREE/ LEGRAND/HAVELLS as approved by GE] |
| 394 | M&L for sub main wiring with two single core 6 Sqmm (FRLS)copper conductor PVC unsheathed cable medium grade including PVC conduit (appropriate size) concealed in wall for sub main connection including 4.0 Sqmm (FRLS) PVC insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly, complete all as specified and directed. Make:-Havells/KEI/Polycab.( Note :-Two runs of 6 sqmm (FRLS) and one run of 4.0 sqmm (FRLS) copper conductor shall be measured as one unit length.) |
| 395 | Taking down/out desert cooler of any make and capacity from various locations, transporting to MES Store Yard and dismantling all unserviceable parts for repair/overhauling, re-fixing the same back to its original position and making necessary connections with and including copper flexible cable 23/0.0076 Sqmm complete all as specified and directed. |
| 396 | M&L for replacement of wood wool pad 15mm thick made out of chicken wire mesh filled with fine quality wood wool and stitched with GI wire for desert cooler of any make & size complete all as specified and directed. |
| 397 | S&F in replacement PVC front grill/air diverter with selector switch and 2 No. indicator for Desert Cooler of any make and capacity complete all as specified and directed. |
| 398 | S&F Fan condenser, 230 Volts of the 3.5 /4 MFD for fan motor of desertt cooler complete all as specified and directed. |
| 399 | M&L for rewinding of stator of exhaust fan/kit fan 18” sweep, 900 RPM of any make with super quality winding copper wire of existing size complete with varnishing, backing, testing including painting with synthetic enamel paint of gray colour complete all as specified and directed. |
| 400 | M&L in replacement desert cooler cabinet, locally fabricated with three side panels, front, top and water tank (size not less than 81.5cm x 80.5cm x 97.5cm) suitable for desert cooler of cap 5000/4000 cum per hour, fabricated with 1 mm thick mild steel galvanized iron sheet including gas welding at joint and testing for water tightness, with and including double diversion grills and grill box, 4 way PVC distributor, PVC pipe 3 to 4 mtr, wood wool pads, electric wiring for fan & pump controlled seperately with 5 amp piano switch and indicator lampos complete all as specified and as directed. |
| 401 | S&F in replacement submersible water lifting pump of capacity 1.25 M head ,230 Volts complete all as specified and directed. Make: Bansal or equivalent as approved by GE. |
| 402 | S&F Kit fan motor 450 mm Sweep 1350 / 1400 RPM complete all as specified and directed.Make : Everest / Summer Cool / Khatian |
| 403 | S&F desert cooler PCB of plastic desert cooler as per sample complete all as specified and directed by Engr-in-Charge . |
| 404 | S&F plastic flexible transparent pipe and nozzle for distribution of water along three sides of desertcooler complete all as specified and directed by Engr-in-Charge . |
| 405 | Deduct schedule of credit (calculation will be done off line)Rs. 1,48,396.00 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
