Repairing And Maintenance Of 3 Units Nhs Type Qtr Allotted To Rehan Bhuneshwar Turi Ajit Majhi At New Colony Under C V Area Repairing And Maintenance Of 3 Units Nhs Type Qtr Allotted To Rehan Bhuneshwar Turi Ajit Majhi At New Colony Under C V Area
Tender Value
Ref. Documents
Estimated cost
Bid Submission
03 Sep 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
BEGUNIA → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repairing And Maintenance Of 3 Units Nhs Type Qtr Allotted To Rehan Bhuneshwar Turi Ajit Majhi At New Colony Under C V Area Repairing And Maintenance Of 3 Units Nhs Type Qtr Allotted To Rehan Bhuneshwar Turi Ajit Majhi At New Colony Under C V Area
BOQ
| Sl. No. | Item Description |
| 1 | Item Description/ Heading |
| 2 | Dismantling doors, windows and clerestory windows (steel or wood)shutter including chowkhats, architrave, holdfasts etc. complete andstacking within 50 metres lead : Of area 3 sq. metres and below |
| 3 | P/F Iron Door (D/L) comp job |
| 4 | P/F Iron Door (D/L) comp job |
| 5 | P/F Iron window (D/L) comp job |
| 6 | Providing and fixing factory made uPVC door frame made of uPVCextruded sections having an overall dimension as below (tolerance±1mm),with wall thickness 2.0 mm (± 0.2 mm), corners of the doorframe to be Jointed with galvanized brackets and stainless steel screws,joints mitred and Plastic welded. The hinge side vertical of the framesreinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1mm) wall thickness and 3 nos. stainless steel hinges fixed to the framecomplete as per manufacturer’s specification and direction of Engineer-in-charge Extruded section profile size 42x50 mm |
| 7 | Providing and fixing to existing door frames.24 mm thick factory made PVC door shutters made of stylesand rails of a uPVC hollow section of size 59x24 mm and wallthickness 2 mm (± 0.2 mm) with inbuilt edging on both sides.The styles and rails mitred and joint at the corners by meansof M.S. galvanised/plastic brackets of size 75x220 mm havingwall thickness 1.0 mm and stainless steel screws. The stylesof the shutter reinforced by inserting galvanised M.S. tube ofsize 20x20 mm and 1 mm (± 0.1 mm) wall thickness. Thelock rail made up of \"H\" section, a uPVC hollow section of size100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to theshutter styles by means of plastic/galvanised M.S. \"U\" cleats.The shutter frame filled with a uPVC multi-chambered singlepanel of size not less than 620 mm, having over all thicknessof 20 mm and 1 mm (± 0.1 mm) wall thickness. The panelsfilled vertically and tie bar at two places by inserting horizontally6 mm galvanised M.S. rod and fastened with nuts and washers,complete as per manufacturer\"s specification and direction ofEngineer-in-charge. (For W.C. and bathroom door shutter). |
| 8 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodiccoating not less than grade AC 10 as per IS : 1868 ) transparent or dyedto required colour or shade, with necessary screws etc. complete : 150x10 mm |
| 9 | Providing and fixing aluminium handles, ISI marked, anodised (anodiccoating not less than grade AC 10 as per IS : 1868) transparent or dyedto required colour or shade, with necessary screws etc. complete : 125 mm |
| 10 | Demolishing cement concrete manually/ by mechanical meansincluding disposal of material within 50 metres lead as per directionof Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 11 | P/f25 mm th C/C flooring 1:2:4 |
| 12 | 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) |
| 13 | 6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand) |
| 14 | Dismantling old plaster or skirting raking out joints and cleaning thesurface for plaster including disposal of rubbish to the dumpingground within 50 metres lead. |
| 15 | White washing with lime to give an even shade :Old work (two or more coats) |
| 16 | Colourwashing on old works |
| 17 | Painting with synthetic enamel paint of approved brand andmanufacture to give an even shade : Two or more coats on new work |
| 18 | Painting with synthetic enamel paint of approved brand andmanufacture of required colour to give an even shade : One or more coats on old work |
| 19 | Total impact of GST for the purpose of CTC |
AI Tender Summary
Tender Timeline
Aug 25, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 06, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender