81357 Repair / Maintainance Of Dg Sets At Ins Parundu Under Ge Tirunelveli Repair / Maintainance Of Dg Sets At Ins Parundu Under Ge Tirunelveli
Tender Value
Ref. Documents
Estimated cost
Bid Submission
07 Sep 2021
0 days left
EMD
28000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
TIRUNELVELI → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
81357 Repair / Maintainance Of Dg Sets At Ins Parundu Under Ge Tirunelveli Repair / Maintainance Of Dg Sets At Ins Parundu Under Ge Tirunelveli
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 31-Aug-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 07-Sep-2021 |
BOQ
| Sl. No. | Item Description |
| 1 | Comprehensive maintenance for diesel engine drive generating set by carrying out routine \"A\" check and \"B\" check as recommended by the respective manufacture of following capacity DG sets complete including cost of minor items like petroleum jelly, grease, nut bolts etc during routine AMC checks once in every month and attending unlimited breakdown calls. Note:- (a) Engine oil, radiator coolant oil, filters required during the maintenance period shall be measured and paid separately at supply only rates and cost of labour for fixing those spares/filling of oils shall be deemed to be included in the rat quoted for this item. (b) Required T&P shall be arranged by the Contractor at site. (c) List of checks to be carried out under \"A\" and \"B\" Check is attached in PS |
| 2 | (a) 500 KVA DG sets at UAV Power house(make : Kirloskar) |
| 3 | (b) 250 KVA DG Set at UAV Power house (Make-Kirloskar |
| 4 | (c) 160 KVA DG set at ATC power house (make- Ashok Leyland) |
| 5 | (d)100 KVA DG Set at NEW ADM Block (Make- Ashok Leyland) |
| 6 | (e) 82.5 KVA DG set at 7N DET (make- Ashok Leyland) |
| 7 | (f) 82.5 KVA DG Sets at DFO (make-Ashok Leyland) |
| 8 | (g) 15 KVA DG set at TS pump house(make-Ashok Leyland) |
| 9 | (h) 35 KVA DG set at DFO (make-Mahindra) |
| 10 | (j) 40 KVA DG set at DFO (Make-ashok Leyland) |
| 11 | Dismantling the radiator and after cooler of following DG sets for removing all scales from the pipes by pressure washing and by using suitable solutions, checking for leakage, arresting leakage if any by welding / brazing, finishing, drying and refixing, filling coolant and testing complete all as required will be measured and paid separately under respective item herein after |
| 12 | (a) 500 KVA DG sets at UAV Power house |
| 13 | (b) 250 KVA DG Set at UAV Power house |
| 14 | (c) 160 KVA DG set at ATC power house |
| 15 | (d)100 KVA DG Set at NEW ADM Block |
| 16 | (e) 82.5 KVA DG set at 7N DET |
| 17 | (f) 82.5 KVA DG Sets at DFO |
| 18 | Supply and fix in replacement of battery 12 volt 180 AH including taking down old unserviceable item |
| 19 | Supply and fix Battery terminal heavy duty 1mtr long standard copper cable with brass clamps, bolts,nuts,washers etc. Including taking down old unserviceable item. |
| 20 | Supply only engine oil SAE 15W40 high quality suitable for Kirloskar make DG set Make: Kirloskar K-OIL |
| 21 | supply only engine oil SAE 15W40 high quality suitable for Ashok Leyland/Mahindra make DG set. Make: Servo super/Gulf Leypower XLL Diesel Engine oil |
| 22 | Supply only coolant oil heavy duty suitable for Kirloskar DG set. Make: Kirloskar K-cool |
| 23 | Supply only coolant oil heavy duty suitable for ashok Leyland/Mahindra DG set. Make LEY power coolant 5000/TVS Girling vericool radiator coolant concentrate |
| 24 | Supply only distilled water suitable for Battery/DG set |
| 25 | Dismantling the fuel pump from the engine, transporting to the service centre and complete servicing and overhauling of the pump including replacement of service kit element, delivery valve, plunger, copper washer etc all as required including re-calibration, refixing and testing complete |
| 26 | (a) 82.5 KVA/160 KVA/100 KVA DG set |
| 27 | Dismantling the water pump from the engine and supply and fixing new water pump of existing size and testing including taking down old unserviceable item complete |
| 28 | (a) 82.5 KVA/160 KVA/100 KVA DG set |
| 29 | (b) 500 KVA/250 KVA DG set |
| 30 | Draining out the diesel tank, cleaning / washing out the sludge using and re-filling with diesel for following DG set |
| 31 | 500 KVA DG set at UAV Power house |
| 32 | 250 KVA DG set at UAV power house |
| 33 | 100 KVA DG set at New Adm Block |
| 34 | 82.5 KVA DG set at 7N DET |
| 35 | 82.5 KVA DG set at 7N DFO |
| 36 | 15 KVA DGs et at TS pump House |
| 37 | Removing and replacing of fuel injector for following DG set 82.5 KVA DG set including taking down old unserviceable |
| 38 | Heating and varnishing of alternator for DG set 100 KVA DG set |
| 39 | Supply and replacement of the following items for DG set any capacity including taking down old unserviceable items |
| 40 | Oil pressure gauge |
| 41 | radiator Cap |
| 42 | Fuel Tank Cap with Lock |
| 43 | Door lock of any type and size complete set |
| 44 | Door gasket of any type and size complete set |
| 45 | AVR Suitable for 15 to 120 KVA Alternators |
| 46 | AVR Suitable for 120 to 200 KVA Alternators |
| 47 | AVR Suitable for 250 to 500 KVA Alternators |
| 48 | AC Ammeter analogue type |
| 49 | AC voltmeter analogue type 0 to 500 volt |
| 50 | Frequency analogue meter |
| 51 | Multifunction digital meter |
| 52 | Ac Ammeter selector switch |
| 53 | Volt meter selector switch |
| 54 | Ignition switch with key for on, off and run |
| 55 | Shunt coil for MCCB |
| 56 | Indicator lamp for panel board as per existing size |
| 57 | No Volt coil suitable for 3 phase power contactor 300 Amps ratings |
| 58 | AMF relay 12 Volt AC |
| 59 | Battery charging alternator 24 volt |
| 60 | RPM Meter with connecting cable |
| 61 | RPM mater with connecting cable |
| 62 | oil pressure sensor |
| 63 | Contactor 4 pole 250 amps capacity |
| 64 | Thermostat |
| 65 | Removing dismantling and overhauling of 12 volt starter motor, replacement of armature coil, field coil, bush bearing etc to make the starter motor serviceable complete all as specified and as directed |
| 66 | Removing dismantling and overhauling of 24 volt starter motor, replacement of armature coil, bush bearing etc to make the starter motor serviceable complete all as direcetd |
| 67 | Spray painting of diesel generating set of following capacity with acoustic enclosure with one coat of synthetic enamel paint including writing of SM/MES No on engine and alternator, body colour shall be apple green black for foundation base frame, red for all guards, all as specified and as directed ` |
| 68 | (a) 82.5 KVA DG set |
| 69 | (b) 15KVA DG Set |
| 70 | M&L for PCC 1:2:4 Type B2 using 40mm graded aggregate as in foundation, filling and mass concrete complete all as specified and as directed by the Engineer-in-charge |
| 71 | Shifting DG setfromone location to another location within the site area using crane, including disconnecting and reconnecting the same, complete all as specified and directed |
| 72 | Supply and replacement of auto 24V battery charger with wiring |
| 73 | Supply and replacement of canopy light 24V 18W including wiring |
| 74 | Supply and replacement of Battery top leg changing |
| 75 | Supply and replacement of Asbestos rope |
| 76 | Supply and replacement of Emergency stop switch |
| 77 | Supply and replacement of the following items for 82.5 KVA DG set including taking down old unserviceable items |
| 78 | Alternator adopter box |
| 79 | Engine safety controller |
| 80 | Stop solenoid |
| 81 | Oil pressure switch |
| 82 | Temperature switch |
| 83 | Engine safety complete wiring |
| 84 | Power Panel complete wiring |
| 85 | Engine ON/OFF relay |
| 86 | Fan Belt |
| 87 | Engine control panel controller and display with wiring |
| 88 | Fuel filter |
| 89 | Oil filter |
| 90 | Air Filter assembly |
| 91 | Fuel Tank indicator dial page |
| 92 | Extension of exhaust pipe |
| 93 | Supply and replacement of the following items for 100KVA DG set including taking down old unserviceable |
| 94 | Air Filter inner and outer set |
| 95 | Oil filter |
| 96 | Fuel filter with water separator |
| 97 | Diesel House |
| 98 | Diesel strainer |
| 99 | Radiator hose set |
| 100 | Water pump radiator belt |
| 101 | Supply and replacement of the following items for 500 KVA DG set including taking down old unserviceable item |
| 102 | Extension of exhaust pipe |
| 103 | Air filter inner and outer set |
| 104 | Oil filter (2Nos) |
| 105 | Diesel filter with water separator bowl and hand priming pump |
| 106 | Diesel Hose set |
| 107 | Radiator hose set |
| 108 | Emergency stop switch |
| 109 | Bus bar insulator |
| 110 | Oil flasher unit |
| 111 | Turbo charger compressor, turbine wheel and center housing |
| 112 | Turbo charger turbine and compressor housing |
| 113 | Turbo charger actuator and outlet elbow |
| 114 | panel board glass with beading |
| 115 | Radiator fan belt (3Nos) |
| 116 | Breather hose |
| 117 | Supply and replacement of the following items for 250KVA DG set including taking down old unserviceable item |
| 118 | Oil filter |
| 119 | air filter inner and outer set |
| 120 | Fuel filter |
| 121 | Radiator fan belt |
| 122 | Supply and replacement of the following items for 15KVA DG Set including taking down old unserviceable item |
| 123 | Emergency stop meter |
| 124 | Oil pressure meter |
| 125 | Oil filter |
| 126 | Air filter |
| 127 | Fuel filter |
| 128 | 12V relay control board |
| 129 | Supply and replacement of the following items for 160 KVA DG set including taking down old unserviceable item |
| 130 | Oil filter |
| 131 | air filter inner and outer set |
| 132 | Fuel filter |
| 133 | Fan belt |
| 134 | Diesel hose set (2 Nos) |
| 135 | Material and labour for earthing complete with galvanised steel earth electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25metres deep below normal ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to 32x6mm GI strip as earthing lead by means of bolts, nuts, check nuts and washers of copper all as shown in electrical plate No.3 connected to earthing test point, including 20mm GI pipe (medium grade) for watering and 40mm GI pipe (medium grade) for protection of earth strip and etc., including testing on completion, PCC chambers in PCC 1:3:6 type C1, RCC 1:2:4 type B1 cover slab 50mm thick with 8mm dia TMT HCR/CRS steel bars at 140mm C/C both way and lifting handle GI funnel & wire mesh, funnel, lugs and charcoal, salt etc all asapplicable complete all as specified and as directed by the Engineer-in-Charge |
AI Tender Summary
Tender Timeline
Aug 31, 2021
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 07, 2021
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedSep 07, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 08, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender