|
| 1 | Excavation in trenches not exceeding 1.5 M in wide and not exc. 1.5 M in depth for taking out or laying ofunder ground cable in soft / loose soil complete all as specified and as directed. |
| 2 | Returning, filling in including spreading, levelling, watering andwell ramming in layers, not exceeding 25 cm thick in soilcomplete all as specified and as directed. |
| 3 | Removing surplus soil to a distance not exceeding 50 M and deposited at a level not exceeding 1.5 M abovethe starting point complete all as specified and as directed. |
| 4 | M&L for natural river sand as cushioning of cables including spreading and punning downcomplete all as specified and as directed.Note :- Punned thickness shall be measured for payment purpose |
| 5 | Supply and laying un-reinforced precast concretecable cover,class HV ,Type -1,flat,size 250mmx150mmx40mm , laid in trenches as cable protection complete all as specified and as directed. |
| 6 | M&L for cutting existing road orPCC drain for taking out orlaying of underground cable including necessary excavation and earth work and making goodby filling earth and 150 mm thickPCC 1:3:6 type C-2 using 40mm graded stone aggregate at top layer complete all as specified and as directed. |
| 7 | M&L for 50mm dia bore galvanised iron light gradefor cable protection and sealing both ends including taking out old pipe complete all as specified and as directed.Make:- Tata/ Jindal/ Prakash Surya. |
| 8 | Taking down or out existing cable of sizes 2/4 core 10 to 16 sqmmfrom the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub stationincluding segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and removing unserviceable cable for further disposal complete all as specified and as directed. |
| 9 | Laying only serviceable cable obtained from taking out in same or new location or in other location of size 2/4 core 10 to 16 sqmm including necessarycable lugs, gland etc complete all as specified and as directed. |
| 10 | Supply, laying, jointing and testing XLPE Cable insulated, armoured, earthed, heavy duty electric cable with aluminium conductor , 1100 Volt grade, cross sectional area 10 sqmm 4 core including necessary cable lugs, glands, insulation tapeetc complete all as specified and as directed.Make:- Finolex/ Gloster/ Polycab |
| 11 | Supply, laying, jointing and testing XLPE Cable insulated, armoured, earthed, heavy duty electric cable with aluminium conductor , 1100 Volt grade, cross sectional area 16 sqmm 4 core including necessary cable lugs, glands, insulation tapeetc complete all as specified and as directed.Make:- Finolex/ Gloster/ Polycab |
| 12 | M&L straight through joint (Heat Shrinkable) for under ground PVC insulated and PVC sheathed armoured heavy duty XLPE cables with aluminium conductor including jointing kit, including making joints for the cable of size 10/16sqmm x 4 core cables including testing complete all as specified and as directed.Make :- Densons / 3M / Raychem |
| 13 | S&F in replacement street light bracket fabricated from 40mm dia medium grade GI pipe bent to shape not exceeding 1.5 M long alongwith 2 Nosflat iron clamps of size 25 x 4mm flat ironincluding nuts, bolts and washers suitable for fixing on poles including applying twocoat of synthetic enamel paint over a coat of red oxide primeron steel surfaces complete all as specified and as directed.Make of GI pipe:- Tata/Jindal/Prakash Surya |
| 14 | S&F in replacement ofclampssuitable for fixing street light on pole fabricated from 32mmx6mmflat ironincluding nuts, bolts and washers suitable for fixing on poles including applying twocoat of synthetic enamel paint over a coat of red oxide primeron steel surfaces complete all as specified and as directed. |
| 15 | S&F inreplacement of20 mm dia rigid non metallicPVC Conduit inclusive of all tee, bends,reducers, bell mouth tube ends and fixing accessories such as couplers , lock nuts, saddles, pipe hooks etc complete all as specified and as directed. |
| 16 | S&F in replacement 20 Watt LED decorative post top light fitting of aesthetically designed with symmetrical light distribution, IP 65 Rating 240V, 50 HZ, AC supply and with all accessories as required complete all as specified and as directed.Make :- Crompton Greaves Cat No. LPTH-20-CDL or equivalent in Philips / Havells |
| 17 | S&F in replacement post top lantern fitting of 40 Watts LED, post-top lantern, aesthetically designed with symmetrical light distribution, IP-65 with all accessories as required complete all as specified and as directed. Make :-Crompton Greaves Cat NoLPTM - 40-CDL or equivalent inPhilips / Havells |
| 18 | S&F in replacement of 60 Watts LED Street lightmade up of pressure die cast housing with toughned glass, IP 66 protection andimpact resistance of IK07 with symmetrical light distribution and with all accessories as required complete all as specified and as directed. Make :- Crompton greaves Cat part No. LSTP-60-CDL or HavellsCat Part No ENDURAPEARLPLUSSL60WLED757SASYTOPC |
| 19 | S&F in replacementof 45 Watts LED,Street lightmade up of pressure die cast housing with toughned glass,IP66 protection and impact resistance of IK07 with symmetrical light distributionall accessories complete all as specified and as directed. Make :-Crompton Greaves Cat part No. LSTS-45-CDL-1 or Havells Cat Part No ENDURAPEARLNEOSL45WLED757SASYTOPC |
| 20 | S&F in replacement150W LED flood light of die-cast aluminium body, IP66 including all accessories as requiredcomplete all as specified and as directed .Make :- Crompton GreavesCat Part No: LFLN-150-CDL /60 or Havells Cat Part No JETAPROPLUSFL150WLED757PLTG |
| 21 | S&F in replacementof 250 W LED flood light of die-cast aluminium body, IP66protection, heat resistant toughened clear glass cover with reflector and all accessories complete with all accessories as required complete all as specified and as directed . Make :- Crompton Greaves Cat Part No:LSFO-250-CDL/60 or equivalent inPhilips/ Havells |
| 22 | Supply & erection of prestressed concrete pole 7.5 Mlong,102mmX152 mm at top and 102mmx281 at bottom, class-11 includingpainting with two coats weather proof acrylic paint over a coat of primer and marking the poles with zebra pattern of yellow and black strips with two rows of each colour with each strip of 6 cm height starting from pole coping, writing of pole number in black paint on yellow background of 100 mm dia circle including taking down old damaged pole by excavation & breaking of the PCC foundation and coping, disconnecting the existing cables, securing the live ends of the cables and wires with tape and reconnecting the old cable or new cable in the terminal boxes and fittings complete all as specified and as directed. Make : Orissa Concerete poles/Baba Loknath Concerete poles Note:- (i) Cost of Excavation and earth work is deemed to be included in theunit rate quoted.(ii) PCC shall be measured and paid seperately. |
| 23 | S&F of street light terminal boxes made out with SMC material, shock & dust proof of inside size 295x195x100mm as per IS and including 100Amp, TPN busbar fixed on insulators, 01 No 10Amp, SP MCB, earth termination with nuts & bolts and including 02 sets offlat iron25x6mm clamps of suitable size with nuts, bolts and washers including two coats of aluminium paint over a coat of primer on exposedsteel surfaces complete all as specified and as directed. |
| 24 | S&F in replacement of100 Amps street light power contactor 3 pole, current rating AC3-80A, AC1-100A, 415V, 50 Hz with inbuilt auxilary contactor as required including necessaryinternal wiring complete all as specified and as directed.Make :- L&T MNX 80 Cat Part No CS97077 or equivalentin Legrand/Schnider/ABB |
| 25 | S&F in replacement of 160 Amps street light power contactor 3 pole, current rating AC3-110A, AC1-160A, 415V, 50 Hz with inbuilt auxilary contactor as required including necessaryinternal wiring complete all as specified and as directed Make :- L&T MNX 110 Cat Part No CS94137 or equivalent in Legrand/Schnider/ABB |
| 26 | S&F in replacement ofof 1.5 sqmm 3 core PVC insulated flexible copper conductor wire from street light to terminal box drawn through MS pipe/PVC conduit or as indicated in other locations complete all asspecified and as directed. |
| 27 | S&F in replacement of 14/15 W LED bulbcomplete allas specified and as directed. Make :- Crompton Greaves /Havells /Philips |
| 28 | Repairs to street light fitting any type, solar or conventional type in situ by checking for any loose connections, jointing of wires, replacement ofLED drivers and itssettings, checking forearth continuityand testingcomplete all as specified and as directed. |
| 29 | M&L plain cement concerete 1:4:8, type D-2 using 40mm graded stone aggreegates as in foundation filling and mass concreteforpole etc complete all as specified and as directed. |
| 30 | M&L for greasing of motors, harnessing wires of 16 Mfor high mast light poles at site completeall as specified and as directed . |
| 31 | M&L for refilling distilled water in Solar Street Light batteries complete all as specified and as directed.Make :- Exide or equivalent as approved |
| 32 | S&F inreplacement of MH lamp 250 Watt,single ended tubular typecomplete allasspecified and as directed .Make :- Crompton Greaves/Havells/Bajaj |
| 33 | S&F in replacement of MH lamp 400 Watt,single ended tubular type complete all as specified and as directed.Make :- Crompton Greaves/Havells/Bajaj |
| 34 | S&F inreplacement of copper ballastsuitable for250 Watt MH light fitting, open construction, heavy duty VPIT complete allasspecified and as directed .Make :- Crompton Greaves/Havells/Bajaj |
| 35 | S&F inreplacement of copper ballastsuitable for400 Watt MH light fitting, open construction, heavy duty VPIT complete allasspecified and as directed .Make :- Crompton Greaves/Havells/Bajaj |
| 36 | S&Fin replacement of electronic igniter suitable for 250to400 Watt MH light fittingscomplete all as specified and as directed .Make : Crompton Greaves/Havells/Bajaj |
| 37 | S&F in replacement of electronic driversuitable for LED street light fittings of capacity 45 Wattcomplete all as specified and as directed. Make :-Crompton Greaves/Havells/Bajaj/C&S Electric Ltd |
| 38 | S&F in replacementof electronic driversuitable for LED street light fittings of capacity 60 Wattcomplete all as specified and as directed. Make :- Crompton Greaves/Havells/Bajaj/C&S Electric Ltd |
| 39 | S&F in replacementof electronic driver suitable for LED street light fittings of capacity 150 Wattcomplete all as specified and as directed.Make : -Crompton Greaves/Havells/Bajaj/C&S Electric Ltd |
| 40 | S&F in replacement of MCB, SP,5 to 32 Amp,240 V,10 KAcomplete all as specified and as directed .Make :- Havells/L&T/C&S Electric Ltd |
