Amp On Barian Gala To Taragarh Road Km. 0 / 0 To 3 / 490 Providing And Laying Tack Coat, B / M, B.C And Edge Line In Km. 0 / 0 To 2 / 0
Tender Value
26.66 Lakhs
Estimated cost
Bid Submission
01 Sep 2021
0 days left
EMD
53350
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dalhousie → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Amp On Barian Gala To Taragarh Road Km. 0 / 0 To 3 / 490 Providing And Laying Tack Coat, B / M, B.C And Edge Line In Km. 0 / 0 To 2 / 0
BOQ
| Sl. No. | Item Description |
| 1 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion pressure distributor at the rate of 0.275 kg (zero point two seven five killograme) per sqm onprepared dry and hungry bituminous surface/granular surface cleaned with Hydraulic broom as per MORD Technical Specification section 500 or as per direction of Engineer-In-Charge including carriage of materails with in all leads, lifts and other incidentals. The rate is including the octori, royality, Malkana, toll tax,GST,or other taxes imposed by the Government. |
| 2 | Providing and laying 50mm (Fifty millimeter) thick consolidated dense graded bituminous macadom with 100 - 120 (one hundred -one hundred twenty) TPH batch type HMP producing an average output of 75 (seventy five) tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.25% (Four point two five )per cent by weight of totalmix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignmernt , rolling with smooth wheel , vibratory and tandem rollers to achieve the desired compaction as per MORTH specification section500 complete in all respect and to the entire satisfactionofEngineer - in- Charge including carriage of materials within all leads, lifts and other incidental .The rate is inclusive of octroi, royality,Malkana, toll tax ,GST or anyother taxes imposed by the Government . |
| 3 | Providing and laying 30 mm (Thirty millimetre) compacted thicknessbituminous concrete with minimum 100-120 (one hundred-one hundred twenty) TPHhot mix batch type plant with electronic controlGrading -II using crushed aggregate 13.2 (Thirteen decimal two millimeter) nominal size of specified grading premixed with bitumen binder VG-10 (Viscosity grade-ten) at the rate of 5.40 to 5.60. (five decimal four zero to five decimal six zero) percent of mix weight transported to site , laid with censor paver finisher hydraulic with censor control to the required grade, level and alignment over a previously prepared surface and rolling complete with smooth three wheel rollar 8-10 (Eight to Ten) tonne capacity for intial break down rolling and vibratory rollar 8-10 (Eight to Ten) tonne capacity or pheumatic type rollar of 12-15 ( Twelve to fifteen) tonne with type pressure of at least 0.56 MPA (Zero decimal five six) for intermidiate rolling and finished rolling with 6-8 (Six to Eight) tonne smooth wheeled tandom roller to achive the desire compactionas per MORTH specification clause No. 500 as per the direction and entire satisfaction ofEngineer-in-Charge including carrige of materials within all leads and lifts and other incidentals the rate including octori, royality, Malkana, toll tax, sale tax ,GST or other taxes imposed by the Government. |
| 4 | Providing and laying Hot applied thermoplastic compound 2.5 mm (two decimal five millimetre) thick with includingreflectorising glass beeds at the rate 250(two hundred fifty gram) gram per square metre area, thickness of 2.5 mm (two point five millimetre) is exclusive of surface applied glass beeds as per IRC:35 and the finsihed surface to be level uniform and free from streaks and holesas per MORTH technical specification Section 800 or as per directions of Engineer-in-Charge, including carriageof materials within all leads, lifts and other incidental.The rate is inclusive of octroi, royality,Malkana, toll tax,GST or anyother taxes imposed by the Government. |
AI Tender Summary
Tender Timeline
Aug 21, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedSep 01, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 01, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender