|
| 1 | Supplying and laying of aluminium conductor PVC insulated, armoured, served, sheathed cable 1100 V grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand alround and protected with burnt bricks on sides and on top complete in all respects. as per PWD Sch. No. 501(J) 25 sq.mm 3.5 core |
| 2 | S/F of following capacity of automatic street light cubical control panel painted with anti corrosive alkali and acid proof paint consisting of timer switch TSO 100 series with contactors HRC fuses, isolating switch metering instrument box with CTS etc. (40 Amp. TPN) as per PWD Sch. No. 807 F |
| 3 | S/F of 16 Sq.mm, 2 core PVC insulated PVC sheathed armoured 1100 V grade Al. conductor cable complete including all T&P men and material required for completion of work as per PWD Sch. No. 501 © |
| 4 | S/F of S.S. wire rope set for High Mast lighting system complete including all T&P men and material required for proper completion of work |
| 5 | S/F of Trailing Cable for High Mast lighting system complete including all T&P men and material required for proper completion of work |
| 6 | S/F of wiring Cable(3Cx1.5 Sq.mm copper wire) for High Mast lighting system complete including all T&P men and material required for proper completion of work |
| 7 | S/Oiling of winch machine forHigh Mast lighting system complete including all T&P men and material required for proper completion of work |
| 8 | S/F of Male -Female plug & socket for High Mast lighting system complete including all T&P men and material required for proper completion of work |
| 9 | S/F ofML-4 contactor MDS/L&T make complete including all T&P men and material required for proper completion of work |
| 10 | S/F of mounting time switch (timer Clock) L&T/MDS make complete including all T&P men and material required for proper completion of work |
| 11 | Supply & wiring of submain with 2 Nos. of 2.5 sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of the work as directed as site by Engineer I/C as per UPPWD Sch. No.289 |
| 12 | Charges for maintenance of entire electrical system of road lighting to cover general supervision for execution of work during the periodof AMC excluding the supply and fixing/installation of all materials. (02 Electrician & 02 Helper on each site) as per HO Letter No. 615-19/SIDA/Estt. dt.01.07.2020. |
| 13 | Cost of all material, spares wire fuses, small accessories required for general maint., cleaning, oiling etc. to keep the entire installation in perfect working order during AMC period. (L.S. Basis) |
| 14 | Supplying and wiring of 4 sq. mm aluminium conductor PVC insulated unsheathed single core cable including all T&P men and material for proper completion of work. |
| 15 | Supply & fixing of D clamp of size 50x6 mm flat iron on ST poles with nuts and washers etc. complete in all respect as per UPPWD Sch. No. 623 |
| 16 | Supply & fixing of 100 x 110 mm shackle insulator 100 x 80 mm pin insulator including GI volt spindle, nuts etc. as pre UPPWD Sch. No. 621 |
| 17 | Supply & fixing of driver suitable for 70 to 110 watt LED street light fittings as per make installed at Site complete in all respect. |
| 18 | Supply & fixing of MCPCB with LED & Lance ( 70 to 110 watt) for suitable installed LED street light fittings complete in all respect. |
| 19 | Supply & Fixing of Glass suitable for installed LED street light fittings complete with rubber gasket etc. complete in all respect.. |
| 20 | Supply & fixing of LDR suitable for installed LED street light fittings complete in all respect. |
| 21 | Supply & fixing of special protection device (SPD) suitable for 70 to 110 watt LED street light fittings as per make installed at Site complete in all respect. |
| 22 | S/F of brass nickel plated compression gland for PVC insulated and armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-in charge as per UPPWD Sch. No. 503 (c) 16 sq.mm 2 core |
| 23 | S/F of brass nickel plated compression gland for PVC insulated and armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-in charge as per UPPWD Sch. No. 503 (j) 25 sq.mm 3.5 core |
| 24 | S/F of palm or pin type copper tin plated cable socket (lug) to the cable leads insulating with tap and making connection etc. complete in all respects as per direction of the Engineer-in charge as per UPPWD Sch. No. 504 (d) 16 sq.mm |
| 25 | S/F of palm or pin type copper tin plated cable socket (lug) to the cable leads insulating with tap and making connection etc. complete in all respects as per direction of the Engineer-in charge as per UPPWD Sch. No. 504 (e) 25 sq.mm |
| 26 | Supply, sagging, jointing and binding of insulated ACSR Weasel conductor including cost of aluminium tape binding and jointing sleaves etc. complete in all respect. |
| 27 | S/F of perpex cover for 150 watt HPSV lamp ofCrompton / Philips/ Havell\"s make complete including all T&P men and material required for proper completion of work |
| 28 | S/F of ignitor for 150 watt HPSV lamp ofBajaj/ Crompton/Philips /Havell\"s make complete including all T&P men and material required for proper completion of work |
| 29 | S/F of SonT 150 watt HPSV lamp ofBajaj/Crompton / Philips/ Havell\"s make complete including all T&P men and material required for proper completion of work |
| 30 | S/F of150 watt HPSV heavy duty copper ballast ofBajaj/Crompton / Philips/ Havell\"s make complete including all T&P men and material required for proper completion of work |
| 31 | S/F of 400 watt HPSV lamp of Bajaj / Crompton / Philips/ Havell\"s make complete including all T&P men and material required for proper completion of work |
| 32 | S/F of 400 watt heavy duty copper wound HPSV ballast of Bajaj / Crompton / Philips/ Havell\"s make complete including all T&P men and material required for proper completion of work |
| 33 | S/F of ignitor for 400 watt HPSV lamp ofBajaj / Crompton / Philips/ Havell\"s make complete including all T&P men and material required for proper completion of work |
| 34 | S/F of porcelain lamp holder for HPSV lamp of Bajaj / Crompton / Philips/ Havell\"s make complete including all T&P men and material required for proper completion of work |
| 35 | S/F of Glass for 2x400 watt/1x400 watt MH/HPSV fitting complete including all T&P men and material required for proper completion of work |
| 36 | Lowring of 30/16 Mtr. High mast lighting system complete in T&P men & material required proper completion of work etc. |
