Military Engineer Services-MES has published Repair Replacement Of Rcc Chajja And Fascia Ceiling And Cracked Rcc Tank And Certain Misc Work At Kanjoli Line Bharatpur Repair Replacement Of Rcc Chajja And Fascia Ceiling And Cracked Rcc Tank And Certain Misc Work At Kanjoli Line Bharatpur. Submission Date for this Tender is 16-09-2021. Water Tank Tenders in GE Bharatpur Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 09-Sep-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 16-09-2021 |
| Sl. No. | Item Description |
| 1 | Demolition of Roofs/stone slabs, floors (other than ground floors), beams staircases, landing, chajjas parapet& similar suspended work Cement concrete including cutting of reinforcement complete all as specified and directed. |
| 2 | M&L for cutting chases, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exc. 20 cm girth in brick wall complete all as specified and directed. |
| 3 | M&L for cutting chases, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exc. 20 cm girth in Stone, concrete block or slab walls complete all as specified and directed. |
| 4 | M&L for Sand stone slabs, 20-25 mm thick, in sunshades, chajjas, shelves, cills, landings, cover stones, templates, etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in CM(1:4), complete all as specified and directed. |
| 5 | S&F for mild steel, corrugated steel sheet 1.25mm thick in wall cladding, steel gates & similar work, cut to size, holes punched; including round headed screws, clout nails or rivets & fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed. Note:- This item is also required for replacement of RCC chajja and fascia. |
| 6 | S&F for rolled mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lenghts i.e. within 20mm of the length indicated) GDE Fe 410-0 W (Gde E-250) quality A complete all as specified and as directed. Note:- This item is also required for replacement of RCC chajja and fascia. |
| 7 | S&F for rolled mild steel sections as in main & cross beams, hip & jack rafters; purlins where connected to common rafters & running rails & guides for sliding doors; fixed with angle cleats or other connecting plates GDE Fe410-0 or Fe 310-O complete all as specified and as directed. Note:- This item is also required for replacement of RCC chajja and fascia. |
| 8 | S&F for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook & pintel hinges; largehasps & staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way & three way straps,plate washers & similar small articles conforming to Fe290-0 Gde E-165 complete all as specified and as directed. |
| 9 | S&F for painting to new or prevously untreated steel surfaces of any description over 10 cm in width or girth with two coats of synthetic enamel paint over a coat of zinc chrome primer including preparatin of surfaces, complete all as specified and as directed. |
| 10 | S & F in repair,1000 ltrISI marked three layer, white colour, rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) with thread type cover and fixed with screw hoisted and fixed in position complete all as specified and as directed. |
| 11 | S & F in repair, 500 ltrISI marked three layer, white colour, rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) with thread type cover and fixed with screw hoisted and fixed in position complete all as specified and as directed. |
| 12 | S&F inrepairs ballvalve of 15 mm bore high pressure of PTMT with epoxy coated aluminium rod & high denistyplastic ball screwed for iron pipe (minimum wt. -142 grams) complete all as specified and as directed. |
| 13 | S&F in repairsballvalve of 20 mm bore high pressure of PTMT with epoxy coated aluminium rod & high denistyplastic ball screwed for iron pipe (minimum wt. -210 grams) complete all as specified and as directed. |
| 14 | S&F in repairPVCcover, thread type, for PVC water tank and fixed withscrewto tankcomplete all as specified and as directed. |
| 15 | M & L for Mild steel hollow sections , fixed independently, without connecting plates etc cut to length (cut to ordinary length ie within 20 mm of the length indicated) complete all as specified and as directed. |
| 16 | S&F of welded steel wire fabric ,weight n. exc 4.00 kg/sq. mfixed to steel members complete all as specified and as directed. |
| 17 | Demolition of concrete of any description & in any position not otherwise specifically provided for (unreinforced) complete all as specified and directed. |
| 18 | M&L forPCC 1:3:6 type C2 using 40 mm graded stone aggregate with smooth finish including necessary form work etc.complete all as specified and as directed. |
| 19 | M&L for providing cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and othe similar bands, plinth courses, bed plates, copings, kneelers, apexstones, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed. |
| 20 | Demolition of brickwork or stone/boulder masonry, built in CM or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles complete all as specified and as directed. |
| 21 | M&L for brickwork with subclass `B" bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed. |
| 22 | Dictto all as per item No 21 above but except Brick complete all as specified and as directed. |
| 23 | M&L for Rendering 15 mm thick in cement and sand mortar 1:6onbrick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified and as directed. |
| 24 | M&L for rendering, under coat 10 mm thick of CM(1:3) on brick or stone wall and while it is in plastic state the Rough cast mixture consisting of crushed stone aggregate size between 6 to 12 mm mixed with coarse sand and cement ratio of 1:1:1 shall be applied and finished even including taking down cement or cement lime plaster of any description from brick or stone walls complete all as specified and as directed. |
| 25 | M&L for rendering 10 mm thick on stone masonry surfaces or surface other than fair face of brickwork in CM (1:6) finished even and smooth including taking down cement or cement lime plaster of any description from brick or stone walls complete all as specified and as directed. |
| 26 | M&L for rendering 10 mm thick on brick work or concrete surfaces in CM (1:3) in ceiling including taking down cement or cement lime plaster of any description from brick or stone walls complete all as specified and as directed. |
| 27 | M&L for cutting chases, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting n. exc 10 cm girth in stone, concrete block or slab walls complete all as specified and as directed. |
| 28 | M&L for cutting holes into or through brick walls built in cement mortar or cement lime mortar & stone walls built in lime mortar and making good in CM (1:3) or PCC (1:2:4) type B-1 as required superficial area not exc 150 sq. cm, complete all as specified and as directed. |
| 29 | S&F for hard drawn steel wire fabric cut to lenghts, bent to shape required & tying with & including mild steel wire (annealed) not less than 0.9mm in dia supplied & fixed in reinforcement weight per square metre n exc 4 Kg complete all as specified and as directed. |
| 30 | Roughening surfaces of old concrete surface of any position wall, floor, roof or ceilings surfaces by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and as directed.. |
| 31 | M&L for Granolithic concrete 1:1:2topping 30mm thick; laid over surface of any position wall, floor,roof or ceilings & finished to an even & fair surface complete all as specified and as directed. |
| 32 | M&L for Precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate set in CM (1:4) in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and as directed. |
| 33 | M&L for Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and as directed. |
| 34 | M&L for Mild steel TMT bars 6mm to 8mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and as directed. |
| 35 | M&L for applying two coats of cement base paint, white or tinted on new wall surface including preparation of surface complete all as specified and as directed. |
| 36 | M&L for applying two coats of cement base paint, white or tinted on new ceiling surface including preparation of surface complete all as specified and as directed. |
| 37 | M&L for applying two coats of Distemper oil emulsion, white or tinted on new wall surface including preparation of surface complete all as specified and as directed. |
| 38 | M&L for applying two coats of Distemper oil emulsion, white or tinted on new ceiling surface including preparation of surface complete all as specified and as directed. |
| 39 | M&L for applying one coats of Distemper oil emulsion, white or tinted on old wall surface including preparation of surface complete all as specified and as directed. |
| 40 | M&L for applying one coats of cement base paint, white or tinted on old wall surface including preparation of surface complete all as specified and as directed. |
| 41 | Taking down Shutters of any description n exc 1 sq.m each complete all as specified and as directed. |
| 42 | Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and as directed. |
| 43 | M&L for 18 mm thick PVC boarding shutters of density exc 550 Kg per cum but n. exc 600 Kg per cum,one side decorative lamination & other side balancing lamination sheet fixed with brackets, screws etc, Panels shall be fabricated using adhesive and screws wherever required all the edges shall be coverd with 18 mm x 1 mm thick edge bending tape or 90 degree edge bend finish as per manufactrure specification or approved patten including dismenteling boarding andy description, fixing in any position with screwscomplete all as specified and as directed. |
| 44 | M&L for 18 mm thick PVC boarding shelves of density exc 550 Kg per Cum but nexc 600 Kg per Cumone side decorative lamination & other sidebalancing lamination sheet fixed with brackets, screws etc, Panels shall be fabricated using adhesive and screws wherever required, Supported for three sides with 18 mm x 18 mm PVC Ply fixed with Screw all the edges shall be coverd with 18 mm x 1 mm thick edge bending tape or 90 degree edge bend finish as per manufactrure specification or approved patternincluding dismenteling boarding andy description, fixing in any position with screwscomplete all as specified and as directed. |
| 45 | M&L for solid PVC wall liningconsisting of 5 mm thick, plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing as per SSR Pt-I, complete all as specified and as directed. |
| 46 | M&L for 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing as per SSR Pt-I, complete all as specified and as directed. |
| 47 | S&F for stainless steel tubular section high strength grade of shape square/round/rectangular as approved ranging 45 mm to 50 mm, including grouting vertically with slabby min 10 mm dia machine made stainless steel nut and screwed one end other end round head not less than 75 mmand making good to match with adjoining floor/slab surfaces complete all as specified and as directed. |
| 48 | S&F for stainless steel tubular section high strength grade of shape square/round/rectangular as approved ranging 12 mm to 25 mm, including securing with adjoining SS material as per approved patternand making good to match with adjoining surfaces complete all as specified and as directed. |
| 49 | S&F Stainless steel handle of 125 mm size as per approved sample forshutter complete all as specified and directed. |
| 50 | S&F Magnet catchfor shutters as per approvedsample complete all as specified and directed. |
| 51 | S&F soft closing hinges O "Dgree" high grade mild steel, bright finish or electrogalvanised as per approvedsample for shutters complete all as specified and directed. Make: Ozone India, Godrej Interio, Finesta or equivalent |
| 52 | S&F solid steel electroplated cabinet security lock reversible system with min two key cylinder length suitable for 18-20 mm cupboard shutter complete all as specified and as directed. |
| 53 | S&F Sheet glass 4.0mm thick, ordinary quality & glazing with oil putty in square n. exc 0.5 sq.m in each pane complete all as specified and as directed. |
| 54 | S&F coloured powder coated mild steel Continuous (piano) hinge,width of flaps (when open) is 30 mm complete all as specified and directed. |
| 55 | Removing building materals etc., (other than spoil payable under items 99 to 102 in Section 3-Earthwork) to a distance of 2.0 Km or under, beyond the lead included in the rates, including loading, unloading & stacking at the destination |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
