Supply , Fitting And Fixing Of Kitchen Equipment And Exhaust System At World Skill Center ( Wsc ) Cafeteria, Bhubaneswar Supply , Fitting And Fixing Of Kitchen Equipment And Exhaust System At World Skill Center ( Wsc ) Cafeteria, Bhubaneswar. , , Mancheswar, Bhubaneswar-Odisha

Supply , Fitting And Fixing Of Kitchen Equipment And Exhaust System At World Skill Center ( Wsc ) Cafeteria, Bhubaneswar Supply , Fitting And Fixing Of Kitchen Equipment And Exhaust System At World Skill Center ( Wsc ) Cafeteria, Bhubaneswar. , Service Area , ( Sa-1 ) - Supplying, Fitting & Fixing Oftable For Plate / Cutlery, Pickel, Papad With 2 U / S Of Size 750Mm X 700Mm X 800Mm - Assembled Top 14 Swggrade 304 With Ss Angle Frame Grade 304 32Mm X 32Mm, Undershelves 18 Swg 304, Ss Body Grade 304, Ss Sq Legs 14 Swg Grade 304 With Nylon Feet Adjustable, To Be Provided Sound Deadenedrubberised To Be Done, Top & Undershelves Arc Welding & Argon Weldingwork, . Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge. ( Excluding Gst ) , ( Sa-2 ) -Supplying, Fitting & Fixing Ofveg Hot Bain Marie 5 Container 1 / 1 Gn Pan Deep-150Mm Of Size 1800Mm X 700Mm X 800Mm - Assembled Ss Top 14 Swg Grade 304 , Ss 304 Under Shelves 18 Swg Ss 304 Tank 18 Swg Ss 304 , Body 18 Swg Ss 304, Gn Pan 1 / 1 X 150 Mm Deepwith Lids , Water Heater With Rottery , Sonser , Switch , On / Off.. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge. ( Excluding Gst ) , ( Sa-3 ) -Supplying, Fitting & Fixing Ofcold Bain Marie4 Container 1 / 2 Gn Pandeep-150Mm Of Size 800Mm X 700Mm X 800Mm- Assembled Ss Outer Body 19 Swggrade 304, Ss Inner Body 20 Swg Grade 304, Ss Tank20 Swg Grade 304 , Temp: +10 Cto -2 C Degree Celsium Doors: Spring Loaded , Self Closing Doors With Magnetic Gasket. Insulation : Puff Insulation. Refrigeration System : Hermetically Sealed Kirloskar Copeland Compressorwith Italian Free Fan Motorforced Draft Cooling. Stainless Steel Racks Of Stainless Steel Rods Provided On Eachcompartment .Side & 2 Cross Supports Of 6Mm Stainless Steel Rods Legs: 150 Long , 38Mmx 38Mm Sq Pipe Stainless Steel With Nylon Bullet Adjustable Feet , Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge. ( Excluding Gst ) , ( Sa-4 ) -Supplying, Fitting & Fixing Of Eg Hot Bain Marie 5 Container 1 / 1 Gn Pan Deep-150Mm Of Size-1800Mm X 700Mm X 800Mm -Assembled Ss Top 14 Swg Grade 304 , Ss 304 Under Shelves 18 Swg Ss 304 , Tank 18 Swg Ss 304 , Body 18 Swg Ss 304, Gn Pan 1 / 1 X 150 Mm Deepwith Lids , Water Heater With Rottery , Sonser , Switch , On / Offincluding Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge. ( Excluding Gst ) , ( Sa-5 ) -Supplying, Fitting & Fixing Of Marie 2 Container 1 / 2 Gn Pan Deep-150Mm Of Size -475Mm X 700Mm X 800Mm- Assembled Ss Top 14 Swg Grade 304 , Ss 304 Under Shelves 18 Swg Ss 304 , Tank 18 Swg Ss 304 , Body 18 Swg Ss 304, Gn Pan 1 / 2 X 150 Mm Deepwith Lids , Water Heater With Rottery , Sonser , Switch , On / Off.. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge. ( Excluding Gst ) , ( Sa-6 ) -Supplying, Fitting & Fixing Of Table For Plate / Cutlery, Pickel, Papad With 2 U / S Of Size 650Mm X 700Mm X 800Mm- Assembledtop 14 Swggrade 304 With Ss Angle Frame Grade 304 32Mm X 32Mm, Undershelves 18 Swg 304, Ss Body Grade 304, Ss Sq Legs 14 Swg Grade 304 With Nylon Feet Adjustable, To Be Provided Sound Deadenedrubberised To Be Done, Top & Undershelves Arc Welding & Argon Weldingwork, . Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge. ( Excluding Gst ) , Bulk Kitchen Area , ( Bk-1 ) -Supplying, Fitting & Fixing Of Bulk Fryer Low Height ( Gas ) Of Size 750Mm X 750Mm X 450Mm -Assembled 14 Swgstainless Steel With Cutout Raised 12 Mm To From Integral Part Of The Top, Side / Rear / Front : 18 Swg .Stainless Steel , Driptray : 20 Swg .Stainless Steel With 18 Swg Stainless Steel Handle, Vessel Rest: 400 Mm X 400 Mm Cast Iron , Oil Painted , Black Matt Finish Colour . Burner : 1 No High Pressure With Individual Pilot & Individual Needle Control Valve On Front Panel. Undershelves : 1 Full Size Undershelves Of 18 Swg .Stainless Steel . Uprights: 2 Pairs , 30Mm X 30Mm Stainless Steel Square Pipes With Nylon Bullet Feet . Sstop Framework : 30Mm X 30Mm Stainless Steel, Ss Square Pipe 14 Swg 304 With Nylon Bullet Adjustablefeet.. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge. ( Excluding Gst ) , ( Bk-2 ) -Supplying, Fitting & Fixing Of Stock Pot Low Height ( Gas ) Of Size 750Mm X 750Mm X 450Mm- Assembled 14 Swgstainless Steel With Cutout Raised 12 Mm To From Integral Part Of The Top, Side / Rear / Front : 18 Swg .Stainless Steel , Driptray : 20 Swg .Stainless Steel With 18 Swg Stainless Steel Handle, Vessel Rest: 400 Mm X 400 Mm Cast Iron , Oil Painted , Black Matt Finish Colour . Burner : 1 No High Pressure With Individual Pilot & Individual Needle Control Valve On Front Panel. Undershelves : 1 Full Size Undershelves Of 18 Swg .Stainless Steel . Uprights: 2 Pairs , 30Mm X 30Mm Stainless Steel Square Pipes With Nylon Bullet Feet . Sstop Framework : 30Mm X 30Mm Stainless Steel, Ss Square Pipe 14 Swg 304 With Nylon Bullet Adjustablefeet.. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge. ( Excluding Gst ) , ( Bk-3 ) -Supplying, Fitting & Fixing Of Idli Steamer With Boiler ( Gas ) - Assembledss Body12 Swg304 , Ss Angle Patti 14 Swg 304 , Ss 16 Swg 304 Idli Trays , Ss 14 Swg 304 Bolier Body , Sunbeam Burner , Ss Sq Legs 14 Swg 304 With Nylon Feet Adjustable, To Be Provided Sound Deadenedrubberised, To Be Done Top & Undershelves Arc Welding & Argon Weldingwork Etc. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge. ( Excluding Gst ) , ( Bk-4 ) -Supplying, Fitting & Fixing Of Work Table With Sink 1 Under Shelvesof Size-1200 X 750 X 800 + 100 Included Splash Back 100-Assembled Withtop& Sink 14 Swg304 Withss Angle Frame 304 32Mm X 32Mm, Undershelves 18 Swg 304, Ss Sq Legs 14 Swg 304 With Nylon Feet Adjustable, To Be Provided Sound Deadenedrubberised, To Be Done Top & Undershelves Arc Welding & Argon Weldingwork Etc. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge. ( Excluding Gst ) , ( Bk-5 ) - Supplying, Fitting & Fixing Of Tilting Rice Boiler Double Jacket ( Gas ) Of Size1200 X 900 X 900 ) ( Capacity-100 Ltr. ) Assembled Withss Stand 2X 2 Sqpipe 14 Swg 304 Ss Qaulity, 12 Swg Vessel Pan 304, Ss 12 Swg Doublejacket Body , Crompton Gear Worm System Tiltingoperative, Handle Rhs, Ribbonburner 1 No , Gas Controller Knob 1 No Etcincluding Cost Of All Labour, Cost Of All Materials , Cost Of Transportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge. ( Excluding Gst ) , ( Bk-6 ) -Supplying, Fitting & Fixing Of Work Table With 2 Under Shelves Of Size 600Mm X 900Mm X 900Mm + 100Mm Included Splash Back -Assembled Withtop 14 Swg304 Withss Angle Frame 304 32Mm X 32Mm, Undershelves 18 Swg 304, Ss Sq Legs 14 Swg 304 With Nylon Feet Adjustable, To Be Provided Sound Deadenedrubberised, To Be Done Top & Undershelves Arc Welding & Argon Weldingwork Etc. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge. ( Excluding Gst ) , ( Bk-9 ) -Supplying, Fitting & Fixing Of Dosa Plate With 1 Under Shelf ( Gas ) Of Size 1200Mm X 600Mm X 800Mm + 100Mm Included Splash Back100mm-Assembled Ms Top 20Mm Thickwith Splash Back Withss Angle Frame 304 32Mm X 32Mm, Undershelves 18 Swg 304, Ss Panel 18 Swg 304 , Ss Body With Embossing18 Swg Grade304, Ss Sq Legs 14 Swg 304 With Nylon Feet Adjustable, 2 Nosv Burners Provided, 2 Knob & 1 Pilots, Ms Gas Pipe Line , To Be Provided Sound Deadenedrubberised, To Be Done Top & Undershelves Arc Welding & Argon Weldingwork Etc. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charg ( Excluding Gst ) , ( Bk-10 ) -Supplying, Fitting & Fixing Of Dosa Batter Table With 1 Under Shelf 2 Round Contailer 8 Dia Deep-200Mm Of Size 750Mm X 600Mm X 800Mm + 100Mm Included Splash Back 100Mm-Assembled Withtop 14 Swg304 Withss Angle Frame 304 32Mm X 32Mm, Ss 16Swg Round Container 8 Dia Deep 200Mmm Undershelves 18 Swg 304, Ss Sq Legs 14 Swg 304 With Nylon Feet Adjustable, To Be Provided Sound Deadenedrubberised, To Be Done Top & Undershelves Arc Welding & Argon Weldingwork Etc. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge. ( Excluding Gst ) , Chapati Section , ( Cs-1 ) -Supplying, Fitting & Fixing Ofchappati Table With 2 Under Shelves Of Size 750Mmx600mmx800mm Mm Included Splashing Of 100Mm -Assembled Withtop 14 Swg304 With Splash Back Withss Angle Frame 304 32Mm X 32Mm, Undershelves 18 Swg 304, Ss Sq Legs 14 Swg 304 With Nylon Feet Adjustable, To Be Provided Sound Deadenedrubberised, To Be Done Top & Undershelves Arc Welding & Argon Weldingwork Etc. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge. ( Excluding Gst ) , ( Cs-2 ) -Supplying, Fitting & Fixing Of Chappati Plate Or Paratacum Puffer Plate With 1 Under Shelf Of Size 1500Mmx600mmx800mm+100 Mm Included Splashing Of 100Mm-Assembled Ms Top 20Mm Thickwith Splash Back Withss Angle Frame 304 32Mm X 32Mm, Undershelves 18 Swg 304, Ss Panel 18 Swg 304 , Ss Body With Embossing18 Swg Grade304, Ss Sq Legs 14 Swg 304 With Nylon Feet Adjustable, 3 Nosv Burners Provided, 4 Knob & 1 Pilots, Ms Gas Pipe Line , To Be Provided Sound Deadenedrubberised, To Be Done Top & Undershelves Arc Welding & Argon Weldingwork Etc. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge. ( Excluding Gst ) , ( Cs-3 ) -Supplying, Fitting & Fixing Of Chappati Rolling Table With 2 Under Shelves Of Size 1200Mm X 600Mm X 800Mm + 100Mm Included Splashing Of 100Mm-Assembled Withtop 14 Swg304 With Splash Back Withss Angle Frame 304 32Mm X 32Mm, Undershelves 18 Swg 304, Ss Sq Legs 14 Swg 304 With Nylon Feet Adjustable, To Be Provided Sound Deadenedrubberised, To Be Done Top & Undershelves Arc Welding & Argon Weldingwork Etc. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge. ( Excluding Gst ) , Indian Section , ( Ins-1 ) -Supplying, Fitting & Fixing Of Pickup Table With 2 Under Shelves + 2 Over Head Shelvesof Size 1500Mm X 600Mm X 800Mm +450Mm + 300Mm Included Overhead Shelves Of 450Mm+300Mm-Assembled Withtop 14 Swg304 With Splash Back Withss Angle Frame 304 32Mm X 32Mm, Undershelves 18 Swg 304, Ss 14 Swg Grade 304 2 Overhead Shelves, Ss Sq Legs 14 Swg 304 With Nylon Feet Adjustable, To Be Provided Sound Deadenedrubberised, To Be Done Top & Undershelves Arc Welding & Argon Weldingwork Etc. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge. ( Excluding Gst ) , ( Ins-2 ) -Supplying, Fitting & Fixing Of 3 Burner Indian Gas Range With 1 Under Of Size 1800Mm X 600Mm X 800Mm+ 100Mm Included Splash Back Of 100Mm-Assembled Withtop 14 Swg304 With Splash Back Withss Angle Frame 304 32Mm X 32Mm, Undershelves 18 Swg 304, Ss Panel 18 Swg 304 , Ss Body With Embossing18 Swg Grade304, Ss Sq Legs 14 Swg 304 With Nylon Feet Adjustable, Ms Casting -14 X14, 3 Burners To Be Provided High & Low Pressure, 3 Knob & 2 Pilots, Ms Gas Pipe Line , To Be Provided Sound Deadenedrubberised, To Be Done Top & Undershelves Arc Welding & Argon Weldingwork Etc. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge. ( Excluding Gst ) , ( Ins-3 ) -Supplying, Fitting & Fixing Of Spreader Table With 2 Under Shelves Of Size 600Mm X 600Mm X 800Mm + 100Mm Included Splash Back Of 100Mm- Assembled Withtop 14 Swg304 With Splash Back Withss Angle Frame 304 32Mm X 32Mm, Undershelves 18 Swg 304, Ss Sq Legs 14 Swg 304 With Nylon Feet Adjustable, To Be Provided Sound Deadenedrubberised, To Be Done Top & Undershelves Arc Welding & Argon Weldingwork Etc. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge. ( Excluding Gst ) , Chinese Section , ( Chs-1 ) -Supplying, Fitting & Fixing Of Pickup Table With Sink 1 Under Shelf + 2 Ohs Of Size1500mm X 600Mm X 800Mm +450Mm+300Mm Overhead Shelves Of 450Mm+300Mm-Assembled Withtop 14 Swg304 With Splash Back Withss Angle Frame 304 32Mm X 32Mm, Undershelves 18 Swg 304, Ss 14 Swg Grade 304 2 Overhead Shelves, Ss Sq Legs 14 Swg 304 With Nylon Feet Adjustable, To Be Provided Sound Deadenedrubberised, To Be Done Top & Undershelves Arc Welding & Argon Weldingwork Etc. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge. ( Excluding Gst ) , ( Chs-2 ) -Supplying, Fitting & Fixing Of 2 Burner Chinese Gas Range With 1 Undershelf Of Size-1200Mm X 700Mm X 800Mm +250Mm Included Splash Back 250Mm -Assembled Withtop 14 Swg304 With Splash Back Withss Angle Frame 304 ( 32Mm X 32Mm ) , Undershelf 18 Swg 304, Ss Panel 18 Swg 304 , Ss Body With Embossing18 Swg Grade304, Ss Sq Legs 14 Swg 304 With Nylon Feet Adjustable, Ms Dom & Ms Casting -14 X14, 2 Burners To Be Provided 1 Nos High & 1 Nos Low Pressure, 2 Knob & 1 Pilots, Ms Gas Pipe Line , To Be Provided Sound Deadenedrubberised, To Be Done Top & Undershelves Arc Welding & Argon Weldingwork Etc. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge. ( Excluding Gst ) , ( Chs-3 ) -Supplying, Fitting & Fixing Of Sperader Table With 2 Under Shelf Of Size 600Mm X 700Mm X 80Mm0 + 100Mm Includedsplash Back 100Mm-Assembled Withtop 14 Swg304 With Splash Back Withss Angle Frame 304 32Mm X 32Mm, Undershelves 18 Swg 304, Ss Sq Legs 14 Swg 304 With Nylon Feet Adjustable, To Be Provided Sound Deadenedrubberised, To Be Done Top & Undershelves Arc Welding & Argon Weldingwork Etc. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge. ( Excluding Gst ) , Wet Grinder Area , ( Wa-1 ) -Supplying, Fitting & Fixing Of Pulverizer ( 5Hp ) - Assembled Anelling / Lid / Feeding Sink Hopper Rounded Front Removable Door Locking Wing Nuts Serrated Liner / Shaft / Beader 5 Sieves / Pipe Base Stand Motor * Control * Protection Motor: Iii Phase , 440 V Electric Heavy Duty Motor Continuous Rating Control : Wall Mounting Control . Dol Starter Protection : Overload Relay , Single Phasing Protection Safety : Automatic Power Supply Cut - Off / On Chamber Door Opening Door Limit Switch , Etc Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge ( Excluding Gst ) , ( Wa-2 ) -Supplying, Fitting & Fixing Of Tilting Wet Grinder- Cap-15Ltrs ) -Assembled Ss Body Stainless Steel14 Swg 304 , Ss Coconut Scrubber, 2Hp Branded Motor , Power Supply -440 / 3Ph / 50Hz, To Be Done Top & Undershelves Arc Welding & Argon Weldingwork Etc. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge. ( Excluding Gst ) , ( Wa-3 ) -Supplying, Fitting & Fixing Of Single Sink Unit With 1 Under Shelf Of Size 600Mm X 60Mm0 X 800Mm + 100Mm Includedsplash Back 100Mm- Assembled Withtop & Sink 14 Swg304 With Splash Back Withss Angle Frame 304 32Mm X 32Mm, Undershelf 18 Swg 304, Ss Sq Legs 14 Swg 304 With Nylon Feet Adjustable, To Be Provided Sound Deadenedrubberised, To Be Done Top & Undershelves Arc Welding & Argon Weldingwork Etc. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge. ( Excluding Gst ) , ( Wa-4 ) -Supplying, Fitting & Fixing Of Dough Kneader ( Capacity 20 Kg ) Assembled Withstainless Steel Mixing Bowl 12 Wg304 , Heavy Duty 2Hp Crompton Motor , Cusomise Mixing Arm, Bowl Shall Have Locking Arragements, Belt Guard, Power Supply- 230V / 50Hz / Single Phaseincluding Cost Of All Labour, Cost Of Materials , Cost Of Transportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge. ( Excluding Gst ) , ( Wa-5 ) -Supplying, Fitting & Fixing Of Potato Peeler ( Capcity-15 Kg ) -Assembled, Ss Body & Drum 14 Swg 304, Branded 1.5 Hp Motor , Power Supply- 230V / 50Hz / Single Phase, Including Cost Of All Labour, Cost Of Materials , Cost Of Transportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge. ( Excluding Gst ) , Butchery Area , ( Ba-1 ) -Supplying, Fitting & Fixing Of Work Table With 2 Under Shelves Of Size 1200Mm X 600Mm X 800Mm + 100Mm Included Splash Back 100 -Assembled Withtop 14 Swg304 With Splash Back Withss Angle Frame 304 32Mm X 32Mm, Undershelves 18 Swg 304, Ss Sq Legs 14 Swg 304 With Nylon Feet Adjustable, To Be Provided Sound Deadenedrubberised, To Be Done Top & Undershelves Arc Welding & Argon Weldingwork Etc. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge ( Excluding Gst ) , ( Ba-3 ) -Supplying, Fitting & Fixing Of Work Table With Sink 1 Under Shelves Of Size1200mm X 600Mm X 800Mm + 100Mm Included Splash Back 100 -Assembled Top & Sink14 Swg 304 With Splash Back Withss Angle Frame 304 32Mm X 32Mm, Undershelves 18 Swg 304, Ss Sq Legs 14 Swg 304 With Nylon Feet Adjustable, To Be Provided Sound Deadenedrubberised, To Be Done Top & Undershelves Arc Welding & Argon Weldingwork Etc. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge ( Excluding Gst ) , ( Ba-4 ) -Supplying, Fitting & Fixing Of Meat Mincer 65 Kg Per / Hr Of Size -Assembledbody Anodized Aluminium, Motor Power 0.5 Hp, To Be Done Top & Undershelves Arc Welding & Argon Weldingwork Etc. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge ( Excluding Gst ) , Grade Manger Area , ( Gma-1 ) -Supplying, Fitting & Fixing Of Work Table With 2 Under Shelves Of Size 1200Mm X 600Mm X 800Mm + 100Mm Included Splash Back 100 -Assembled Withtop 14 Swg304 With Splash Back Withss Angle Frame 304 32Mm X 32Mm, Undershelves 18 Swg 304, Ss Sq Legs 14 Swg 304 With Nylon Feet Adjustable, To Be Provided Sound Deadenedrubberised, To Be Done Top & Undershelves Arc Welding & Argon Weldingwork Etc. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge ( Excluding Gst ) , ( Gma-2 ) -Supplying& Fixing Of Chopping Board Made: From Nylon High Density Polyethylene ( Hdpe ) , 20 Mm Thikness Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge ( Excluding Gst ) , ( Gma-3 ) -Supplying, Fitting & Fixing Of Work Table With Sink 1 Under Shelves Of Size1200mm X 600Mm X 800Mm + 100Mm Included Splash Back 100 -Assembled Top & Sink14 Swg 304 With Splash Back Withss Angle Frame 304 32Mm X 32Mm, Undershelves 18 Swg 304, Ss Sq Legs 14 Swg 304 With Nylon Feet Adjustable, To Be Provided Sound Deadenedrubberised, To Be Done Top & Undershelves Arc Welding & Argon Weldingwork Etc. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge ( Excluding Gst ) , ( Gma-5 ) -Supplying, Fitting & Fixing Of Vegetable Racks With Creats 6 Nos Of Size500mm X 625Mm X 1800Mm-Assembled14 Swg Grade 304 Angle Pattiwithss Angle Frame 304 32Mm X 32Mm, Ss Sq Legs 14 Swg 304 With Nylon Feet Adjustable, To Be Provided Sound Deadenedrubberised, To Be Done Top & Undershelves Arc Welding & Argon Weldingwork Etc. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge ( Excluding Gst ) , ( Gma-6 ) -Supplying, Fitting & Fixing Of Ss Onion Bins Nos Of Size1200mm X 600Mm X 1000Mm, Assembledss 11 Swg 304 Angle Frame , Ss Mesh Wire Covering , Front Dispense, Castor Wheels With 2 Nos Front Brake, To Be Done Arc Welding & Argon Weldingwork Etc. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge ( Excluding Gst ) , Walk In Chiller , ( Wc-1 ) -Supplying, Fitting & Fixing Of 4 Door Vertical Refrigerator Of Size1200mm X 600Mm X 2100Mm-Assembled Inner Tank: 20 Swg 304 Stainless Steel, Ssbody 18 Swg 304 Capacity : 1000 Ltr Pan Resting : 10 Mm X 15Mm X 10Mm 16 Swg Stainless Steel Channel Pairs With 15 Mm Top Edge Out To Rest The Pans Before Sliding Channel Pairs Fixed At 73 Mm Clear Distance.Temp Indicator : Special Non -Cogging Electronic Indicator With Built In Power Supply.Temp: -1 Cto +4 C Degree Celsium Doors: Spring Loaded , Self Closing Doors With Magnetic Gasket. Insulation : Puf Insulation.Refrigeration System : Hermetically Sealed Kirloskar Copeland Compressorwith Italian Free Fan Motorforced Draft Cooling.S.S.Rack: 2 Nos.Stainless Steel Racks Of Stainless Steel Rods Provided On Eachcompartment .Side & 2 Cross Supports Of 6Mm Stainless Steel Rods Legs: 150 Long , 38Mm Dia Stainless Steel Pipes With Nylon Bullet Feetinner Body : 20 / 22 Swg Stainless Steel Capacity : 1000 Ltrpan Resting : 10 Mm X 15Mm X 10Mm 16 Swg Stainless Steel Channel Pairs With 15 Mm Top Edge Out To Rest The Pans Before Sliding Channel Pairs Fixed At 73 Mm Clear Distance. Temp Indicator : Special Non -Cogging Electronic Indicator With Built In Power Supply. Temp: 1 Cto 4 C Degree Celsium Doors: Spring Loaded , Self Closing Doors With Magnetic Gasket.Insulation : Puf Insulation.Refrigeration System : Hermetically Sealed Kirloskar Copeland Compressorwith Italian Free Fan Motorforced Draft Cooling.S.S.Rack: 2 Nos.Stainless Steel Racks Of Stainless Steel Rods Provided On Eachcompartment .Side & 2 Cross Supports Of 6Mm Stainless Steel Rods Legs: 150 Long , 38Mm Dia Stainless Steel Pipes With Nylon Bullet Feet . Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge ( Excluding Gst ) , ( Wc-2 ) -Supplying, Fitting & Fixing Of 2 Door Vertical Freezer Of Size800mm X 600Mm X 2100Mm- Assembled Inner Tank: 20 Swg 304 Stainless Steel, Ssbody 18 Swg 304 Capacity : 500 Ltr Pan Resting : 10 Mm X 15Mm X 10Mm 16 Swg Stainless Steel Channel Pairs With 15 Mm Top Edge Out To Rest The Pans Before Sliding Channel Pairs Fixed At 73 Mm Clear Distance. Temp Indicator : Special Non -Cogging Electronic Indicator With Built In Power Supply. Temp: -17Cto -23 C Degree Celsium Doors: Spring Loaded , Self Closing Doors With Magnetic Gasket. Insulation : Puf Insulation. Refrigeration System : Hermetically Sealed Kirloskar Copeland Compressorwith Italian Free Fan Motorforced Draft Cooling. S.S.Rack: 2 Nos.Stainless Steel Racks Of Stainless Steel Rods Provided On Eachcompartment .Side & 2 Cross Supports Of 6Mm Stainless Steel Rodslegs: 150 Long , 38Mm Dia Stainless Steel Pipes With Nylon Bullet Feetinner Body : 20 / 22 Swg Stainless Steel Capacity : 1000 Ltr Pan Resting : 10 Mm X 15Mm X 10Mm 16 Swg Stainless Steel Channel Pairs With 15 Mm Top Edge Out To Rest The Pans Before Sliding Channel Pairs Fixed At 73 Mm Clear Distance.Temp Indicator : Special Non -Cogging Electronic Indicator With Built In Power Supply.Temp: 1 Cto 4 C Degree Celsium Doors: Spring Loaded , Self Closing Doors With Magnetic Gasket.Insulation : Puf Insulation. Refrigeration System : Hermetically Sealed Kirloskar Copeland Compressorwith Italian Free Fan Motorforced Draft Cooling.S.S.Rack: 2 Nos.Stainless Steel Racks Of Stainless Steel Rods Provided On Eachcompartment .Side & 2 Cross Supports Of 6Mm Stainless Steel Rods Legs: 150 Long , 38Mm Dia Stainless Steel Pipes With Nylon Bullet Feetincluding Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge ( Excluding Gst ) . , Pantry Section , ( Ps-7 ) -Supplying, Fitting & Fixing Of Work Table With 2 Under Shelves Of Size 600Mm X 600Mm X 800Mm + 100Mm Included Splash Back 100 -Assembled Withtop 14 Swg304 With Splash Back Withss Angle Frame 304 32Mm X 32Mm, Undershelves 18 Swg 304, Ss Sq Legs 14 Swg 304 With Nylon Feet Adjustable, To Be Provided Sound Deadenedrubberised, To Be Done Top & Undershelves Arc Welding & Argon Weldingwork Etc. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge ( Excluding Gst ) , ( Ps-8 ) -Supplying, Fitting & Fixing Of Double Deep Fat Fryer Of Size 600Mm X 600Mm X 800Mm + 100Mm Included Splash Back 100 -Assembled Withtop 14 Swg304 With Removablesplash Back , Ss Angle Frame 304 32Mm X 32Mm, Undershelf 18 Swg 304, Ss Sq Legs 14 Swg 304 With Nylon Feet Adjustable, 1 / 2 Gn Pan Deep -200Mmm Qty-2 Each 9Ltrscapacity& Rod Heater Tobe Providedeach Rod Heater 3 Kw , To Be Provided Sound Deadenedrubberised, To Be Done Top & Undershelves Arc Welding & Argon Weldingwork Etc. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge ( Excluding Gst ) , Dish Wash Area , ( Dw-1 ) -Supplying, Fitting & Fixing Of Soil Dish Receiver With Garbage Chute Of Size 1650Mm X 600Mm X 800Mm + 100Mm-Assembled Withtop In Deep-100 Mm14 Swg304, Ss Angle Frame 304 32Mm X 32Mm, Cross Bracingpipe 14 Swggrade 30425Mm X 25Mm , Ss Sq Legs 14 Swg 304 With Nylon Feet Adjustable, To Be Provided Sound Deadenedrubberised, To Be Done Top & Undershelves Arc Welding & Argon Weldingwork Etc. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge ( Excluding Gst ) , ( Dw-2 ) -Supplying, Fitting & Fixing Of Two Sink Unit With Cross Bracing Of Size 1250Mm X 750Mm X 850Mm + 100Mm Included Splash Back 100-Assembled Top & Sink14 Swg 304 With Splash Back Withss Angle Frame 304 32Mm X 32Mm, Undershelves 18 Swg 304, Ss Sq Legs 14 Swg 304 With Nylon Feet Adjustable, To Be Provided Sound Deadenedrubberised, To Be Done Top & Undershelves Arc Welding & Argon Weldingwork Etc. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge ( Excluding Gst ) , ( Dw-6 ) -Supplying, Fitting & Fixing Of Ss Clean Dish Rack 5 Shelves Of Size 1200Mm X 450Mm X 1800Mm- Assembled All Shelves 14 Swg 304Withss Angle Frame 304 ( 32Mm X 32Mm ) , Ss Sq Legs 14 Swg 304 With Nylon Feet Adjustable, To Be Provided Sound Deadenedrubberised, To Be Done Top & Undershelves Arc Welding & Argon Weldingwork Etc. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge ( Excluding Gst ) , ( Dw-7 ) -Supplying, Fitting & Fixing Of Soil Dish Collection Triolely Of Size 900Mm X 600Mm X 900Mm- Assembled All Shelves 14 Swg 304Withss Angle Frame 304 ( 32Mm X 32Mm ) , Ss Roundlegs 14 Swg 304 With Castor Wheels With 2 Nosfront Brake, To Be Provided Sound Deadenedrubberised, To Be Done Top & Undershelves Arc Welding & Argon Weldingwork Etc. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge ( Excluding Gst ) , Pot Wash Area , ( Pw-2 ) -Supplying, Fitting & Fixing Of 3 Shelves Ss Pot Rack Of Size 1200Mm X 450Mm X 1500Mm- Assembled Outer Pipe14 Swggrade 304 ( 50Mm X 50Mm ) , Inner Pipe 14 Swg 304 ( 25Mm X 25Mm ) , Ss Sq Legs 14 Swg 304 With Nylon Feet Adjustable, To Be Done Top & Undershelves Arc Welding & Argon Weldingwork Etc. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge ( Excluding Gst ) , Day Store , ( Ds-1 ) -Supplying, Fitting & Fixing Of Ms Rack 5 Shelvesof Size 1050Mm X 450Mm X 1800Mm- Mscoated Shelves14 Swg, Slotted Anglelegs 14 Swg 304 With Nylon, To Be Provided Sound Deadenedrubberised. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge ( Excluding Gst ) , ( Ds-2 ) -Supplying, Fitting & Fixing Of Ms Rack 5 Shelvesof Size 1200Mm X 450Mm X 1800Mm- Mscoated Shelves14 Swg, Slotted Anglelegs 14 Swg 304 With Nylon, To Be Provided Sound Deadenedrubberised. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge ( Excluding Gst ) , ( Ds-3 ) -Supplying, Fitting & Fixing Of 3 Shelves Ss Pallets Of Size 1200Mm X 450Mm X 1500Mm- Assembled Outer Pipe14 Swggrade 304 ( 50Mm X 50Mm ) , Inner Pipe 14 Swg 304 ( 25Mm X 25Mm ) , Ss Sq Legs 14 Swg 304 With Nylon Feet Adjustable, To Be Done Top & Undershelves Arc Welding & Argon Weldingwork Etc. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge ( Excluding Gst ) , ( Ds-4 ) -Supplying, Fitting & Fixing Of 3 Shelves Ss Pallets Of Size 1200Mm X 450Mm X 1500Mm- Assembled Outer Pipe14 Swggrade 304 ( 50Mm X 50Mm ) , Inner Pipe 14 Swg 304 ( 25Mm X 25Mm ) , Ss Sq Legs 14 Swg 304 With Nylon Feet Adjustable, To Be Done Top & Undershelves Arc Welding & Argon Weldingwork Etc. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge ( Excluding Gst ) , Locker & Changing Room , ( Lcr-1 ) -Supplying, Fitting & Fixing Of Ms Locker Of Size 1200Mm X 450Mm X 1500Mm- Assembledms Covering Body 16 Swg & Under Shelves 14Swg , Doors 16 Swg, All Lockerskey Arragements , Powder Coatingfull Body & Shelves, To Be Done Top & Undershelves Arc Welding & Argon Weldingwork Etc.Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge ( Excluding Gst ) , Ss Exhust Hood , ( Eh-1 ) -Supplying, Fitting & Fixing Of Exhaust Hood With Baffle Filtersof Size 2800Mm X 750Mm X 500Mm-Assembled Ss Body 14 Swg 304Withss Angle Frame 304 ( 32Mm X 32Mm ) , Ss 16 Swg Grade 304Baffle Filtres , Ss16 Swg 304Drip Tray For Oil Collector, To Be Done Body Arc Welding & Argon Weldingwork Etc. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge. ( Excluding Gst ) , ( Eh-2 ) -Supplying, Fitting & Fixing Of Exhaust Hood With Baffle Filtersof Size 1200Mm X 900Mm X 500Mm-Assembled Ss Body 14 Swg 304Withss Angle Frame 304 ( 32Mm X 32Mm ) , Ss 16 Swg Grade 304Baffle Filtres , Ss16 Swg 304Drip Tray For Oil Collector, To Be Done Body Arc Welding & Argon Weldingwork Etc. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge. ( Excluding Gst ) , ( Eh-3 ) -Supplying, Fitting & Fixing Of Exhaust Hood With Baffle Filtersof Size 1350Mm X 900Mm X 500Mm-Assembled Ss Body 14 Swg 304Withss Angle Frame 304 ( 32Mm X 32Mm ) , Ss 16 Swg Grade 304Baffle Filtres , Ss16 Swg 304Drip Tray For Oil Collector, To Be Done Body Arc Welding & Argon Weldingwork Etc. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge. ( Excluding Gst ) , ( Eh-4 ) -Supplying, Fitting & Fixing Of Exhaust Hood With Baffle Filtersof Size 1200Mm X 650Mm X 500Mm-Assembled Ss Body 14 Swg 304Withss Angle Frame 304 ( 32Mm X 32Mm ) , Ss 16 Swg Grade 304Baffle Filtres , Ss16 Swg 304Drip Tray For Oil Collector, To Be Done Body Arc Welding & Argon Weldingwork Etc. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge. ( Excluding Gst ) , ( Eh-5 ) -Supplying, Fitting & Fixing Of Exhaust Hood With Baffle Filtersof Size 1500Mm X 650Mm X 500Mm-Assembled Ss Body 14 Swg 304Withss Angle Frame 304 ( 32Mm X 32Mm ) , Ss 16 Swg Grade 304Baffle Filtres , Ss16 Swg 304Drip Tray For Oil Collector, To Be Done Body Arc Welding & Argon Weldingwork Etc. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge. ( Excluding Gst ) , ( Eh-6 ) -Supplying, Fitting & Fixing Of Exhaust Hood With Baffle Filtersof Size 1800Mm X 600Mm X 500Mm-Assembled Ss Body 14 Swg 304Withss Angle Frame 304 ( 32Mm X 32Mm ) , Ss 16 Swg Grade 304Baffle Filtres , Ss16 Swg 304Drip Tray For Oil Collector, To Be Done Body Arc Welding & Argon Weldingwork Etc. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge. ( Excluding Gst ) , ( Eh-7 ) -Supplying, Fitting & Fixing Of Exhaust Hood With Baffle Filtersof Size 1200Mm X 750Mm X 500Mm-Assembled Ss Body 14 Swg 304Withss Angle Frame 304 ( 32Mm X 32Mm ) , Ss 16 Swg Grade 304Baffle Filtres , Ss16 Swg 304Drip Tray For Oil Collector, To Be Done Body Arc Welding & Argon Weldingwork Etc. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge. ( Excluding Gst ) , Ss Grating , ( Gr-1 ) -Supplying, Fitting & Fixing Of Ss Grating With Perforated Tray Of Size 300Mm X 300Mm X 25Mm- Assembled Outer Pipe14 Swggrade 304 ( 32Mm X 32Mm ) , Inner Pipe 14 Swg 304 ( 25Mm X 25Mm ) , Ss 14 Swg 304 Perforated Tray , Ss 11 Swggarde 304 Angle Frame 32Mm X 32Mmto Be Done Arc Welding & Argon Weldingwork Etc. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge ( Excluding Gst ) , ( Gr-2 ) -Supplying, Fitting & Fixing Of Ss Grating With Perforated Tray Of Size 600Mm X 300Mm X25mm- Assembled Outer Pipe14 Swggrade 304 ( 32Mm X 32Mm ) , Inner Pipe 14 Swg 304 ( 25Mm X 25Mm ) , Ss 14 Swg 304 Perforated Tray , Ss 11 Swggarde 304 Angle Frame 32Mm X 32Mmto Be Done Arc Welding & Argon Weldingwork Etc. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge. ( Excluding Gst ) , ( Gr-3 ) -Supplying, Fitting & Fixing Of Ss Grating With Perforated Tray Of Size 900 0Mm X 300Mm X 25Mm- Assembled Outer Pipe14 Swggrade 304 ( 32Mm X 32Mm ) , Inner Pipe 14 Swg 304 ( 25Mm X 25Mm ) , Ss 14 Swg 304 Perforated Tray , Ss 11 Swggarde 304 Angle Frame 32Mm X 32Mmto Be Done Arc Welding & Argon Weldingwork Etc. Including Cost Of All Labour, Cost Of Materials , Cost Oftransportation, Loading And Un-Loading Etc Complete In All Respect As Per Direction Of Engineer-In-Charge ( Excluding Gst ) , Exhaust System , Supplying, Fitting & Fixing Of Exhaust Fan: Providing & Fixing On Site 5 Hp Fan Direct Drive Centrifugal - S.I.S.W Fan To Have Backward Inclined Blades Impellers Should Be Statically And Dynamically Balanced . 960 Rpm -Makes Of Siemens , Crompton, Or Equivalent. Fan Motor Have Squirrel Cage , To Operate On 3 Phase50hz Ac Supply With Necessary Rain Protective Cover For Motor With Necessary Rain Protective Cover For Motor With Galvanized Sheet. Motor Suitable To Run For 2 Hours A Day Continuously With Effciency Of 85% To 90% Including Cost Of All Labour, , Cost Of All Materials, Cost Of Transportation, Loading, Um-Loading Etc. Complete In Allrespect As Per Direction Of Engineer-In-Charge. ( Excluding Gst ) , Supplying, Fitting & Fixing Of M.S.Stands For Exhaust Air Fan -Size To Be Compatable To The Blower Fan. Stand Should Be Painted With 2 Coat Of Zinc Chromate Primer And 2 Coats Epoxy Paint. Entire Stand To Be Well Made - With All Excessive Burrs Well Griounded & Finished & Then Suitably Galvanised I Ncluding Cost Of All Labour, Cost Of All Materials, Cost Of Transportation, Loading, Um-Loading Etc. Complete In Allrespect As Per Direction Of Engineer-In-Charge. ( Excluding Gst ) , Supplying, Fitting & Fixing Of Anti -Vibration Pads: Providing And Fixing Heavy Duty-Dunlop Make Anti Vibration Pads Of Suitable Height Under The Fan -Each Suitable To Take Load Of 250 Kg Including Cost Of All Labour, , Cost Of All Materials, Cost Of Transportation, Loading, Um-Loading Etc. Complete In Allrespect As Per Direction Of Engineer-In-Charge. ( Excluding Gst ) , Supplying, Fitting & Fixing Of Ducting Works: Ducting Works To Be Fabricated From 22 G.G.I Sheet Complete With Supports Brackets , Felt Packing , Etc Sheets To Be Of Jindal / Sail Make Only -Preferably Jindal Ducts To Be Of 18G But Where Necessary Adequate M.S.Angle Frameworks To Be Cleaned And Properly Galvanised Must Be Provided For Larger Ducts To Hold Up The Inner Side From Not Caving In During Operations. All Ducting Should Be Of Flange Type Construction - Unless Specifically Asked - To Be Of Slip Type Construction. All Nut Bolts Used Should Be Of Isi Approved -Zinc Coated Type. Low Duct Velocities To Take Care Of Noise Providing & Fixing On Site 5 Hp Fan Direct Drive Centrifugal - S.I.S.W Fan To Have Backward Inclined Blades Impellers Should Be Statically And Dynamically Balanced . 960 Rpm -Makes Of Siemens , Crompton, Or Equivalent. Fan Motor Have Squirrel Cage , To Operate On 3 Phase50hz Ac Supply With Necessary Rain Protective Cover For Motor With Necessary Rain Protective Cover For Motor With Galvanized Sheet. Motor Suitable To Run For 2 Hours A Day Continuously With Effciency Of 85% To 90% Including Cost Of All Labour, , Cost Of All Materials, Cost Of Transportation, Loading, Um-Loading Etc. Complete In Allrespect As Per Direction Of Engineer-In-Charge ( Excluding Gst ) , Supplying, Fitting & Fixing Of Canvas Connections All Fan Canvas Connection Should Be Of Thick Canvasand Should Have Double Canvas Flange - So As To Prevent Rats And Other Rodents Eating Into It ( Would Be Provided With Ss Mesh All Around ) Wire Mesh Of T-304 Stainless Steel Quality , Wire Diameter 1.1938 Mm, 4 X 4 Wires Per 2.54 Cm With Opening Providing & Fixing On Site 5 Hp Fan Direct Drive Centrifugal - S.I.S.W Fan To Have Backward Inclined Blades Impellers Should Be Statically And Dynamically Balanced . 960 Rpm -Makes Of Siemens , Crompton, Or Equivalent. Fan Motor Have Squirrel Cage , To Operate On 3 Phase50hz Ac Supply With Necessary Rain Protective Cover For Motor With Necessary Rain Protective Cover For Motor With Galvanized Sheet. Motor Suitable To Run For 2 Hours A Day Continuously With Efficiency Of 85% To 90% Including Cost Of All Labour, , Cost Of All Materials, Cost Of Transportation, Loading, Un-Loading Etc. Complete In Allrespect As Per Direction Of Engineer-In-Charge. ( Excluding Gst ) , Fresh Air System , Supplying, Fitting & Fixing Of Tube Axial Fan 3 Ph , 2 Hp , 1440 Rpm.Capacity Of Fans To Be Of 5500 Cmf Each For 2 Hp At Static Pressure Of 1.5 Wg .Impeller To Be Statically & Dynamically Balanced- Complete With Mounting Arrangement Of -Gms Crc Sheet. Motor Must Be Of 1 Hp Makes Of Bharat Bijlee / Crompton / Siemens / Wquivalent. Body Of Fan To Be Of 3 Mm Thick M.S.Duly Rustproofed & Painted With Epoxy Paint On Outside Motor Suitable To Run For 2 Hours A Day Continuisly With Efficiency Of 85 % At Full Load. Providing & Fixing On Site 5 Hp Fan Direct Drive Centrifugal – S.I.S.W. Fan To Have Backward Inclined Blades Impellers Should Be Statically And Dynamically Balanced . 960 Rpm -Makes Of Siemens , Crompton, Or Equivalent. Fan Motor Have Squirrel Cage , To Operate On 3 Phase50hz Ac Supply With Necessary Rain Eotective Cover For Motor With Necessary Rain Protective Cover For Motor With Galvanized Sheet. Motor Suitable To Run For 2 Hours A Day Continuously With Effciency Of 85% To 90% Including Cost Of All Labour, , Cost Of All Materials, Cost Of Transportation, Loading, Um-Loading Etc. Complete In Allrespect As Per Direction Of Engineer-In-Charge. ( Excluding Gst ) , Supplying, Fitting & Fixing Of Fresh Air Ducting Works: Ducting Works To Be Fabricated From 20 G.G.I.Sheets Complete With Supports , Brackets , Felt Packing , Etc Sheets To Be Of Jindal / Sail Make Only- Preferably Jindal.Providing & Fixing On Site 5 Hp Fan Direct Drive Centrifugal - S.I.S.W Fan To Have Backward Inclined Blades Impellers Should Be Statically And Dynamically Balanced . 960 Rpm -Makes Of Siemens , Crompton, Or Equivalent. Fan Motor Have Squirrel Cage , To Operate On 3 Phase50hz Ac Supply With Necessary Rain Protective Cover For Motor With Necessary Rain Protective Cover For Motor With Galvanized Sheet. Motor Suitable To Run For 2 Hours A Day Continuously With Effciency Of 85% To 90% Including Cost Of All Labour, , Cost Of All Materials, Cost Of Transportation, Loading, Un-Loading Etc. Complete In Allrespect As Per Direction Of Engineer-In-Charge.. ( Excluding Gst ) , Supplying, Fitting & Fixing Of Fresh Air Grill All Ducting Should Be Of Flange Type Construction . All Nut Bolts Used Should Be Isi Approved -Zinc Coated Type Low Duct Velocities To Take Care Of Noiseproviding & Fixing On Site 5 Hp Fan Direct Drive Centrifugal - S.I.S.W Fan To Have Backward Inclined Blades Impellers Should Be Statically And Dynamically Balanced . 960 Rpm-Makes Of Siemens , Crompton, Or Equivalent. Fan Motor Have Squirrel Cage , To Operate On 3 Phase50 Hz Ac Supply With Necessary Rain Protective Cover For Motor With Necessary Rain Protective Cover For Motor With Galvanized Sheet. Motor Suitable To Run For 2 Hours A Day Continuously With Effciency Of 85% To 90% Including Cost Of All Labour, , Cost Of All Materials, Cost Of Transportation, Loading, Un-Loading Etc. Complete In Allrespect As Per Direction Of Engineer-In-Charge.. ( Excluding Gst ) , Supplying, Fitting & Fixing Of Canvas Counter Flanges All Fan Canvas Connections Should Be Of Thick Canvas And Should Have Double Canvas Flange - So As To Prevent Rats And Other Rodents Eating Into It ( Would Be Provided With Ss Mesh All Around ) Wire Mesh Of T-304 Stainless Steel Quality , Wire Diameter 1.1938 Mm , 4 X 4 Wires Per 2.54 Cm With Opening Of 5.16 Mm Providing & Fixing On Site 5 Hp Fan Direct Drive Centrifugal – S.I.S.W. Fan To Have Backward Inclined Blades Impellers Should Be Statically And Dynamically Balanced . 960 Rpm -Makes Of Siemens , Crompton, Or Equivalent. Fan Motor Have Squirrel Cage , To Operate On 3 Phase50hz Ac Supply With Necessary Rain Protective Cover For Motor With Necessary Rain Protective Cover For Motor With Galvanized Sheet. Motor Suitable To Run For 2 Hours A Day Continuously With Effciency Of 85% To 90% Including Cost Of All Labour, , Cost Of All Materials, Cost Of Transportation, Loading, Un-Loading Etc. Complete In Allrespect As Per Direction Of Engineer-In-Charge ( Excluding Gst ) , Supplying, Fitting & Fixing Of Gas Line System ( Lpg ) With Tata / Jinalgas Pipe Withall Necessary Filter 10 Cyclinder Manifold , Burner Pital , Cylinder Pital With Labour Charges. Total Pipe Line 100 Ft Lumsumproviding & Fixing On Site 5 Hp Fan Direct Drive Centrifugal - S.I.S.W Fan To Have Backward Inclined Blades Impellers Should Be Statically And Dynamically Balanced . 960 Rpm -Makes Of Siemens , Crompton, Or Equivalent. Fan Motor Have Squirrel Cage , To Operate On 3 Phase50hz Ac Supply With Necessary Rain Protective Cover For Motor With Necessary Rain Protective Cover For Motor With Galvanized Sheet. Motor Suitable To Run For 2 Hours A Day Continuously With Efficiency Of 85% To 90% Including Cost Of All Labour, , Cost Of All Materials, Cost Of Transportation, Loading, Un-Loading Etc. Complete In All Respect As Per Direction Of Engineer-In-Charge. ( Excluding Gst )

INR 7080 /-

Refer document

Refer document

Name of Work:SUPPLY, FITTING & FIXING OF KITCHEN EQUIPMENT AND EXHAUST SYSTEM AT WORLS SKILL CENTRE (WSC) CAFETERIA,BHUBANESWAR.

Sl. No.	Item Description
1	Service Area
2	( SA-1)- SUPPLYING, FITTING & FIXING OFTABLE FOR PLATE/ CUTLERY,PICKEL,PAPAD WITH 2 U/S of size 750mm X 700mm X 800mm - Assembled Top 14 SwgGrade 304 with SS Angle Frame Grade 304 32mm x 32mm,Undershelves 18 swg 304,SS BODY Grade 304, SS Sq Legs 14 Swg Grade 304 with Nylon Feet Adjustable, to be provided sound deadenedrubberised To be done, Top & Undershelves Arc Welding & Argon WeldingWork, . including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge.(Excluding GST)
3	(SA-2)-SUPPLYING, FITTING & FIXING OFVEG HOT BAIN MARIE 5 CONTAINER 1/1 GN PAN DEEP-150MM of size 1800mm X 700mm X 800mm - Assembled SS TOP 14 SWG GRADE 304 ,SS 304 UNDER SHELVES 18 SWG SS 304 TANK 18 SWG SS 304 ,BODY 18 SWG SS 304, GN PAN 1/1 X 150 MM DEEPWITH LIDS ,WATER HEATER WITH ROTTERY , SONSER , SWITCH , ON / OFF.. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge. (Excluding GST)
4	(SA-3)-SUPPLYING, FITTING & FIXING OFCOLD BAIN MARIE4 CONTAINER 1/2 GN PANDEEP-150MM of size 800mm X 700mm X 800mm- Assembled Ss Outer Body 19 SwgGrade 304, Ss Inner Body 20 Swg Grade 304, Ss Tank20 Swg Grade 304 , Temp: +10 CTo -2 C Degree Celsium Doors: Spring Loaded , Self Closing Doors With Magnetic Gasket. Insulation : Puff Insulation. Refrigeration System : Hermetically Sealed Kirloskar Copeland CompressorWith Italian Free Fan MotorForced Draft Cooling. Stainless Steel Racks Of Stainless Steel Rods Provided On EachCompartment .Side & 2 Cross Supports Of 6mm Stainless Steel Rods Legs: 150 Long , 38mmX 38mm Sq Pipe Stainless Steel With Nylon Bullet Adjustable Feet , including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge. (Excluding GST)
5	(SA-4)-SUPPLYING, FITTING & FIXING OF EG HOT BAIN MARIE 5 CONTAINER 1/1 GN PAN DEEP-150MM of Size-1800mm X 700mm X 800mm -Assembled Ss Top 14 Swg Grade 304 ,Ss 304 Under Shelves 18 Swg Ss 304 ,Tank 18 Swg Ss 304 ,Body 18 Swg Ss 304, Gn Pan 1/1 X 150 Mm DeepWith Lids ,Water Heater With Rottery , Sonser , Switch , On / Offincluding cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge. (Excluding GST)
6	(SA-5)-SUPPLYING, FITTING & FIXING OF MARIE 2 CONTAINER 1/2 GN PAN DEEP-150MM of Size -475mm X 700mm X 800mm- Assembled Ss Top 14 Swg Grade 304 ,Ss 304 Under Shelves 18 Swg Ss 304 ,Tank 18 Swg Ss 304 ,Body 18 Swg Ss 304, Gn Pan 1/2 X 150 Mm DeepWith Lids ,Water Heater With Rottery , Sonser , Switch , On / Off.. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge. (Excluding GST)
7	(SA-6)-SUPPLYING, FITTING & FIXING OF TABLE FOR PLATE/ CUTLERY,PICKEL,PAPAD WITH 2 U/S OF SIZE 650mm X 700mm X 800mm- AssembledTop 14 SwgGrade 304 with SS Angle Frame Grade 304 32mm x 32mm,Undershelves 18 swg 304,SS BODY Grade 304, SS Sq Legs 14 Swg Grade 304 with Nylon Feet Adjustable, to be provided sound deadenedrubberised To be done, Top & Undershelves Arc Welding & Argon WeldingWork, . including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge. (Excluding GST)
8	Bulk Kitchen Area
9	(BK-1)-SUPPLYING, FITTING & FIXING OF BULK FRYER LOW HEIGHT(GAS) of Size 750mm X 750mm X 450mm -Assembled 14 SwgStainless Steel With Cutout Raised 12 Mm To From Integral Part Of The Top,Side /Rear/ Front : 18 Swg .Stainless Steel , Driptray : 20 Swg .Stainless Steel With 18 Swg Stainless Steel Handle,Vessel Rest: 400 Mm X 400 Mm Cast Iron , Oil Painted , Black Matt Finish Colour . Burner : 1 No High Pressure With Individual Pilot & Individual Needle Control Valve On Front Panel. Undershelves : 1 Full Size Undershelves Of 18 Swg .Stainless Steel . Uprights: 2 Pairs , 30mm X 30mm Stainless Steel Square Pipes With Nylon Bullet Feet . SsTop Framework : 30mm X 30mm Stainless Steel, Ss Square Pipe 14 Swg 304 With Nylon Bullet AdjustableFeet.. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge.(Excluding GST)
10	(BK-2)-SUPPLYING, FITTING & FIXING OF STOCK POT LOW HEIGHT (GAS ) of Size 750mm X 750mm X 450mm- Assembled 14 SwgStainless Steel With Cutout Raised 12 Mm To From Integral Part Of The Top,Side /Rear/ Front : 18 Swg .Stainless Steel , Driptray : 20 Swg .Stainless Steel With 18 Swg Stainless Steel Handle,Vessel Rest: 400 mm X 400 mm Cast Iron , Oil Painted , Black Matt Finish Colour . Burner : 1 No High Pressure With Individual Pilot & Individual Needle Control Valve On Front Panel. Undershelves : 1 Full Size Undershelves Of 18 Swg .Stainless Steel . Uprights: 2 Pairs , 30mm X 30mm Stainless Steel Square Pipes With Nylon Bullet Feet . SsTop Framework : 30mm X 30mm Stainless Steel, Ss Square Pipe 14 Swg 304 With Nylon Bullet AdjustableFeet.. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge.(Excluding GST)
11	(BK-3)-SUPPLYING, FITTING & FIXING OF IDLI STEAMER WITH BOILER(GAS)- AssembledSS body12 Swg304 , SS Angle Patti 14 swg 304 , SS 16 swg 304 Idli Trays , SS 14 swg 304 Bolier Body , Sunbeam Burner , SS Sq Legs 14 Swg 304 with Nylon Feet Adjustable, to be provided sound deadenedrubberised, To be done Top & Undershelves Arc Welding & Argon WeldingWork etc. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge.(Excluding GST)
12	(BK-4)-SUPPLYING, FITTING & FIXING OF WORK TABLE WITH SINK 1 UNDER SHELVESOF SIZE-1200 X 750 X 800 + 100 INCLUDED SPLASH BACK 100-Assembled withTop& Sink 14 Swg304 withSS Angle Frame 304 32mm x 32mm,Undershelves 18 swg 304, SS Sq Legs 14 Swg 304 with Nylon Feet Adjustable, to be provided sound deadenedrubberised, To be done Top & Undershelves Arc Welding & Argon WeldingWork etc. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge. (Excluding GST)
13	(BK-5)- SUPPLYING, FITTING & FIXING OF TILTING RICE BOILER DOUBLE JACKET ( GAS) OF SIZE1200 X 900 X 900) ( Capacity-100 ltr.)Assembled withSS Stand 2"x 2" SQPIPE 14 SWG 304 SS Qaulity, 12 Swg Vessel Pan 304, SS 12 swg DoubleJacket Body , Crompton Gear Worm System TiltingOperative,Handle RHS, RibbonBurner 1 No , Gas Controller Knob 1 No etcincluding cost of all labour,cost of all materials ,cost of transportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge.(Excluding GST)
14	(BK-6)-SUPPLYING, FITTING & FIXING OF WORK TABLE WITH 2 UNDER SHELVES OF SIZE 600mm X 900mm X 900mm + 100mm included Splash Back -Assembled withTop 14 Swg304 withSS Angle Frame 304 32mm x 32mm,Undershelves 18 swg 304, SS Sq Legs 14 Swg 304 with Nylon Feet Adjustable, to be provided sound deadenedrubberised, To be done Top & Undershelves Arc Welding & Argon WeldingWork etc. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge. (Excluding GST)
15	(BK-9)-SUPPLYING, FITTING & FIXING OF DOSA PLATE WITH 1 UNDER SHELF (GAS) of Size 1200mm X 600mm X 800mm + 100mm Included Splash Back100mm-Assembled Ms Top 20mm Thickwith Splash Back withSS Angle Frame 304 32mm x 32mm, Undershelves 18 swg 304, Ss Panel 18 swg 304 , Ss Body with Embossing18 Swg Grade304,SS Sq Legs 14 Swg 304 with Nylon Feet Adjustable,2 NosV Burners Provided, 2 knob & 1 Pilots, Ms Gas Pipe Line , to be provided sound deadenedrubberised, To be done Top & Undershelves Arc Welding & Argon WeldingWork etc. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charg (Excluding GST)
16	(BK-10)-SUPPLYING, FITTING & FIXING OF DOSA BATTER TABLE WITH 1 UNDER SHELF 2 ROUND CONTAILER 8" DIA Deep-200mm of size 750mm X 600mm X 800mm + 100mm Included Splash Back 100mm-Assembled withTop 14 Swg304 withSS Angle Frame 304 32mm x 32mm, SS 16swg round Container 8" Dia Deep 200mmm Undershelves 18 swg 304, SS Sq Legs 14 Swg 304 with Nylon Feet Adjustable, to be provided sound deadenedrubberised, To be done Top & Undershelves Arc Welding & Argon WeldingWork etc. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge. (Excluding GST)
17	Chapati Section
18	(CS-1)-SUPPLYING, FITTING & FIXING OFCHAPPATI TABLE WITH 2 UNDER SHELVES of size 750mmx600mmx800mm mm included splashing of 100mm -Assembled withTop 14 Swg304 with Splash Back withSS Angle Frame 304 32mm x 32mm,Undershelves 18 swg 304, SS Sq Legs 14 Swg 304 with Nylon Feet Adjustable, to be provided sound deadenedrubberised, To be done Top & Undershelves Arc Welding & Argon WeldingWork etc. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge.(Excluding GST)
19	(CS-2)-SUPPLYING, FITTING & FIXING OF CHAPPATI PLATE OR PARATACUM PUFFER PLATE WITH 1 UNDER SHELF of size 1500mmx600mmx800mm+100 mm included splashing of 100mm-Assembled Ms Top 20mm Thickwith Splash Back withSS Angle Frame 304 32mm x 32mm,Undershelves 18 swg 304, Ss Panel 18 swg 304 , Ss Body with Embossing18 Swg Grade304,SS Sq Legs 14 Swg 304 with Nylon Feet Adjustable, 3 NosV Burners Provided, 4 knob & 1 Pilots, Ms Gas Pipe Line , to be provided sound deadenedrubberised, To be done Top & Undershelves Arc Welding & Argon WeldingWork etc. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge.(Excluding GST)
20	(CS-3)-SUPPLYING, FITTING & FIXING OF CHAPPATI ROLLING TABLE WITH 2 UNDER SHELVES of size 1200mm X 600mm X 800mm + 100mm included splashing of 100mm-Assembled withTop 14 Swg304 with Splash Back withSS Angle Frame 304 32mm x 32mm,Undershelves 18 swg 304, SS Sq Legs 14 Swg 304 with Nylon Feet Adjustable, to be provided sound deadenedrubberised, To be done Top & Undershelves Arc Welding & Argon WeldingWork etc. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge. (Excluding GST)
21	Indian Section
22	(INS-1)-SUPPLYING, FITTING & FIXING OF PICKUP TABLE WITH 2 UNDER SHELVES + 2 OVER HEAD SHELVESof size 1500mm X 600mm X 800mm +450mm + 300mm included Overhead Shelves of 450mm+300mm-Assembled withTop 14 Swg304 with Splash Back withSS Angle Frame 304 32mm x 32mm,Undershelves 18 swg 304,SS 14 swg Grade 304 2 overhead Shelves,SS Sq Legs 14 Swg 304 with Nylon Feet Adjustable, to be provided sound deadenedrubberised, To be done Top & Undershelves Arc Welding & Argon WeldingWork etc. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge. (Excluding GST)
23	(INS-2)-SUPPLYING, FITTING & FIXING OF 3 BURNER INDIAN GAS RANGE WITH 1 UNDER of size 1800mm X 600mm X 800mm+ 100mm included Splash Back of 100mm-Assembled withTop 14 Swg304 with Splash Back withSS Angle Frame 304 32mm x 32mm,Undershelves 18 swg 304, Ss Panel 18 swg 304 , Ss Body with Embossing18 Swg Grade304,SS Sq Legs 14 Swg 304 with Nylon Feet Adjustable, MS Casting -14" x14", 3 Burners to be Provided High & low Pressure, 3 knob & 2 Pilots, Ms Gas Pipe Line , to be provided sound deadenedrubberised, To be done Top & Undershelves Arc Welding & Argon WeldingWork etc. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge. (Excluding GST)
24	(INS-3)-SUPPLYING, FITTING & FIXING OF SPREADER TABLE WITH 2 UNDER SHELVES of size 600mm X 600mm X 800mm + 100mm included Splash Back of 100mm- Assembled withTop 14 Swg304 with Splash Back withSS Angle Frame 304 32mm x 32mm,Undershelves 18 swg 304, SS Sq Legs 14 Swg 304 with Nylon Feet Adjustable, to be provided sound deadenedrubberised, To be done Top & Undershelves Arc Welding & Argon WeldingWork etc. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge. (Excluding GST)
25	Chinese Section
26	(CHS-1)-SUPPLYING, FITTING & FIXING OF PICKUP TABLE WITH SINK 1 UNDER SHELF + 2 OHS of size1500mm X 600mm X 800mm +450mm+300mm Overhead Shelves of 450mm+300mm-Assembled withTop 14 Swg304 with Splash Back withSS Angle Frame 304 32mm x 32mm,Undershelves 18 swg 304,SS 14 swg Grade 304 2 overhead Shelves,SS Sq Legs 14 Swg 304 with Nylon Feet Adjustable, to be provided sound deadenedrubberised, To be done Top & Undershelves Arc Welding & Argon WeldingWork etc. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge. (Excluding GST)
27	(CHS-2)-SUPPLYING, FITTING & FIXING OF 2 BURNER CHINESE GAS RANGE WITH 1 UNDERSHELF of size-1200mm X 700mm X 800mm +250mm included Splash Back 250mm -Assembled withTop 14 Swg304 with Splash Back withSS Angle Frame 304 (32mm x 32mm),Undershelf 18 swg 304, Ss Panel 18 swg 304 , Ss Body with Embossing18 Swg Grade304,SS Sq Legs 14 Swg 304 with Nylon Feet Adjustable, MS Dom & ms casting -14" x14", 2 Burners to be Provided 1 nos High & 1 nos low Pressure, 2 knob & 1 Pilots, Ms Gas Pipe Line , to be provided sound deadenedrubberised, To be done Top & Undershelves Arc Welding & Argon WeldingWork etc. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge.(Excluding GST)
28	(CHS-3)-SUPPLYING, FITTING & FIXING OF SPERADER TABLE WITH 2 UNDER SHELF of size 600mm X 700mm X 80mm0 + 100mm includedSplash Back 100mm-Assembled withTop 14 Swg304 with Splash Back withSS Angle Frame 304 32mm x 32mm,Undershelves 18 swg 304, SS Sq Legs 14 Swg 304 with Nylon Feet Adjustable, to be provided sound deadenedrubberised, To be done Top & Undershelves Arc Welding & Argon WeldingWork etc. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge.(Excluding GST)
29	Wet Grinder Area
30	(WA-1)-SUPPLYING, FITTING & FIXING OF PULVERIZER (5HP)- Assembled Anelling / Lid / Feeding Sink Hopper Rounded Front Removable Door Locking Wing Nuts Serrated Liner / Shaft / Beader 5 Sieves / Pipe Base Stand Motor * Control * Protection Motor: Iii Phase , 440 V Electric Heavy Duty Motor Continuous Rating Control : Wall Mounting Control . Dol Starter Protection : Overload Relay , Single Phasing Protection Safety : Automatic Power Supply Cut - Off/On Chamber Door Opening Door Limit Switch , etc including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge(Excluding GST)
31	(WA-2)-SUPPLYING, FITTING & FIXING OF TILTING WET GRINDER- Cap-15ltrs)-Assembled SS Body Stainless Steel14 swg 304 , SS Coconut Scrubber,2hp Branded Motor ,Power Supply -440/3ph/50hz,To be done Top & Undershelves Arc Welding & Argon WeldingWork etc. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge.(Excluding GST)
32	(WA-3)-SUPPLYING, FITTING & FIXING OF SINGLE SINK UNIT WITH 1 UNDER SHELF of size 600mm X 60mm0 X 800mm + 100mm includedSplash Back 100mm- Assembled withTop & SInk 14 Swg304 with Splash Back withSS Angle Frame 304 32mm x 32mm,Undershelf 18 swg 304, SS Sq Legs 14 Swg 304 with Nylon Feet Adjustable, to be provided sound deadenedrubberised, To be done Top & Undershelves Arc Welding & Argon WeldingWork etc. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge.(Excluding GST)
33	(WA-4)-SUPPLYING, FITTING & FIXING OF DOUGH KNEADER(Capacity 20 Kg) Assembled withStainless Steel Mixing Bowl 12 wg304 , Heavy Duty 2HP Crompton Motor , Cusomise Mixing Arm, Bowl shall have locking arragements,Belt Guard, Power Supply- 230v/50hz/Single Phaseincluding cost of all labour,cost of materials ,cost of transportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge. (Excluding GST)
34	(WA-5)-SUPPLYING, FITTING & FIXING OF POTATO PEELER (CAPCITY-15 KG)-Assembled,SS Body & Drum 14 Swg 304, Branded 1.5 Hp Motor , Power Supply- 230v/50hz/Single Phase,including cost of all labour,cost of materials ,cost of transportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge. (Excluding GST)
35	Butchery Area
36	(BA-1)-SUPPLYING, FITTING & FIXING OF WORK TABLE WITH 2 UNDER SHELVES OF SIZE 1200mm X 600mm X 800mm + 100mm included Splash Back 100 -Assembled withTop 14 Swg304 with Splash Back withSS Angle Frame 304 32mm x 32mm,Undershelves 18 swg 304, SS Sq Legs 14 Swg 304 with Nylon Feet Adjustable, to be provided sound deadenedrubberised, To be done Top & Undershelves Arc Welding & Argon WeldingWork etc. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge(Excluding GST)
37	(BA-3)-SUPPLYING, FITTING & FIXING OF WORK TABLE WITH SINK 1 UNDER SHELVES OF SIZE1200mm X 600mm X 800mm + 100mm included Splash Back 100 -Assembled Top & Sink14 swg 304 with Splash Back withSS Angle Frame 304 32mm x 32mm,Undershelves 18 swg 304, SS Sq Legs 14 Swg 304 with Nylon Feet Adjustable, to be provided sound deadenedrubberised, To be done Top & Undershelves Arc Welding & Argon WeldingWork etc. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge(Excluding GST)
38	(BA-4)-SUPPLYING, FITTING & FIXING OF MEAT MINCER 65 KG PER /HR OF SIZE -AssembledBody Anodized Aluminium,Motor Power 0.5 hp, To be done Top & Undershelves Arc Welding & Argon WeldingWork etc. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge (Excluding GST)
39	Grade Manger Area
40	(GMA-1)-SUPPLYING, FITTING & FIXING OF WORK TABLE WITH 2 UNDER SHELVES OF SIZE 1200mm X 600mm X 800mm + 100mm included Splash Back 100 -Assembled withTop 14 Swg304 with Splash Back withSS Angle Frame 304 32mm x 32mm,Undershelves 18 swg 304, SS Sq Legs 14 Swg 304 with Nylon Feet Adjustable, to be provided sound deadenedrubberised, To be done Top & Undershelves Arc Welding & Argon WeldingWork etc. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge (Excluding GST)
41	(GMA-2)-SUPPLYING& FIXING OF CHOPPING BOARD Made: From Nylon High Density Polyethylene (HDPE) , 20 MM Thikness including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge(Excluding GST)
42	(GMA-3)-SUPPLYING, FITTING & FIXING OF WORK TABLE WITH SINK 1 UNDER SHELVES OF SIZE1200mm X 600mm X 800mm + 100mm included Splash Back 100 -Assembled Top & Sink14 swg 304 with Splash Back withSS Angle Frame 304 32mm x 32mm,Undershelves 18 swg 304, SS Sq Legs 14 Swg 304 with Nylon Feet Adjustable, to be provided sound deadenedrubberised, To be done Top & Undershelves Arc Welding & Argon WeldingWork etc. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge (Excluding GST)
43	(GMA-5)-SUPPLYING, FITTING & FIXING OF VEGETABLE RACKS WITH CREATS 6 NOS OF SIZE500mm X 625mm X 1800mm-Assembled14 swg Grade 304 Angle PattiwithSS Angle Frame 304 32mm x 32mm, SS Sq Legs 14 Swg 304 with Nylon Feet Adjustable, to be provided sound deadenedrubberised, To be done Top & Undershelves Arc Welding & Argon WeldingWork etc. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge(Excluding GST)
44	(GMA-6)-SUPPLYING, FITTING & FIXING Of SS ONION BINS NOS OF SIZE1200mm X 600mm X 1000mm, AssembledSS 11 Swg 304 Angle Frame , SS Mesh Wire Covering , Front Dispense, Castor Wheels with 2 Nos Front Brake, To be done Arc Welding & Argon WeldingWork etc. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge(Excluding GST)
45	Walk in Chiller
46	(WC-1)-SUPPLYING, FITTING & FIXING OF 4 DOOR VERTICAL REFRIGERATOR OF SIZE1200mm X 600mm X 2100mm-Assembled Inner Tank: 20 Swg 304 Stainless Steel, SSBody 18 Swg 304 Capacity : 1000 Ltr Pan Resting : 10 Mm X 15mm X 10mm 16 Swg Stainless Steel Channel Pairs With 15 Mm Top Edge Out To Rest The Pans Before Sliding Channel Pairs Fixed At 73 Mm Clear Distance.Temp Indicator : Special Non -Cogging Electronic Indicator With Built In Power Supply.Temp: -1 CTo +4 C Degree Celsium Doors: Spring Loaded , Self Closing Doors With Magnetic Gasket. Insulation : Puf Insulation.Refrigeration System : Hermetically Sealed Kirloskar Copeland CompressorWith Italian Free Fan MotorForced Draft Cooling.S.S.Rack: 2 Nos.Stainless Steel Racks Of Stainless Steel Rods Provided On EachCompartment .Side & 2 Cross Supports Of 6mm Stainless Steel Rods Legs: 150 Long , 38mm Dia Stainless Steel Pipes With Nylon Bullet FeetInner Body : 20/22 Swg Stainless Steel Capacity : 1000 LtrPan Resting : 10 Mm X 15mm X 10mm 16 Swg Stainless Steel Channel Pairs With 15 Mm Top Edge Out To Rest The Pans Before Sliding Channel Pairs Fixed At 73 Mm Clear Distance. Temp Indicator : Special Non -Cogging Electronic Indicator With Built In Power Supply. Temp: 1 CTo 4 C Degree Celsium Doors: Spring Loaded , Self Closing Doors With Magnetic Gasket.Insulation : Puf Insulation.Refrigeration System : Hermetically Sealed Kirloskar Copeland CompressorWith Italian Free Fan MotorForced Draft Cooling.S.S.Rack: 2 Nos.Stainless Steel Racks Of Stainless Steel Rods Provided On EachCompartment .Side & 2 Cross Supports Of 6mm Stainless Steel Rods Legs: 150 Long , 38mm Dia Stainless Steel Pipes With Nylon Bullet Feet . including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge (Excluding GST)
47	(WC-2)-SUPPLYING, FITTING & FIXING OF 2 DOOR VERTICAL FREEZER OF SIZE800mm X 600mm X 2100mm- Assembled Inner Tank: 20 Swg 304 Stainless Steel, SSBody 18 Swg 304 Capacity : 500 Ltr Pan Resting : 10 Mm X 15mm X 10mm 16 Swg Stainless Steel Channel Pairs With 15 Mm Top Edge Out To Rest The Pans Before Sliding Channel Pairs Fixed At 73 Mm Clear Distance. Temp Indicator : Special Non -Cogging Electronic Indicator With Built In Power Supply. Temp: -17CTo -23 C Degree Celsium Doors: Spring Loaded , Self Closing Doors With Magnetic Gasket. Insulation : Puf Insulation. Refrigeration System : Hermetically Sealed Kirloskar Copeland CompressorWith Italian Free Fan MotorForced Draft Cooling. S.S.Rack: 2 Nos.Stainless Steel Racks Of Stainless Steel Rods Provided On EachCompartment .Side & 2 Cross Supports Of 6mm Stainless Steel RodsLegs: 150 Long , 38mm Dia Stainless Steel Pipes With Nylon Bullet FeetInner Body : 20/22 Swg Stainless Steel Capacity : 1000 Ltr Pan Resting : 10 Mm X 15mm X 10mm 16 Swg Stainless Steel Channel Pairs With 15 Mm Top Edge Out To Rest The Pans Before Sliding Channel Pairs Fixed At 73 Mm Clear Distance.Temp Indicator : Special Non -Cogging Electronic Indicator With Built In Power Supply.Temp: 1 CTo 4 C Degree Celsium Doors: Spring Loaded , Self Closing Doors With Magnetic Gasket.Insulation : Puf Insulation. Refrigeration System : Hermetically Sealed Kirloskar Copeland CompressorWith Italian Free Fan MotorForced Draft Cooling.S.S.Rack: 2 Nos.Stainless Steel Racks Of Stainless Steel Rods Provided On EachCompartment .Side & 2 Cross Supports Of 6mm Stainless Steel Rods Legs: 150 Long , 38mm Dia Stainless Steel Pipes With Nylon Bullet Feetincluding cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge(Excluding GST) .
48	Pantry Section
49	(PS-7)-SUPPLYING, FITTING & FIXING OF WORK TABLE WITH 2 UNDER SHELVES OF SIZE 600mm X 600mm X 800mm + 100mm included Splash Back 100 -Assembled withTop 14 Swg304 with Splash Back withSS Angle Frame 304 32mm x 32mm,Undershelves 18 swg 304, SS Sq Legs 14 Swg 304 with Nylon Feet Adjustable, to be provided sound deadenedrubberised, To be done Top & Undershelves Arc Welding & Argon WeldingWork etc. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge (Excluding GST)
50	(PS-8)-SUPPLYING, FITTING & FIXING OF DOUBLE DEEP FAT FRYER OF SIZE 600mm X 600mm X 800mm + 100mm included Splash Back 100 -Assembled withTop 14 Swg304 with RemovableSplash Back ,SS Angle Frame 304 32mm x 32mm,Undershelf 18 swg 304, SS Sq Legs 14 Swg 304 with Nylon Feet Adjustable,1/2 Gn Pan Deep -200mmm Qty-2 Each 9ltrsCapacity& Rod Heater tobe Providedeach Rod Heater 3 kw ,to be provided sound deadenedrubberised, To be done Top & Undershelves Arc Welding & Argon WeldingWork etc. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge(Excluding GST)
51	Dish wash Area
52	(DW-1)-SUPPLYING, FITTING & FIXING OF SOIL DISH RECEIVER WITH GARBAGE CHUTE OF SIZE 1650mm X 600mm X 800mm + 100mm-Assembled withTop in Deep-100 mm14 Swg304, SS Angle Frame 304 32mm x 32mm,Cross BracingPipe 14 swgGrade 30425mm x 25mm , SS Sq Legs 14 Swg 304 with Nylon Feet Adjustable, to be provided sound deadenedrubberised, To be done Top & Undershelves Arc Welding & Argon WeldingWork etc. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge(Excluding GST)
53	(DW-2)-SUPPLYING, FITTING & FIXING OF TWO SINK UNIT WITH CROSS BRACING OF SIZE 1250mm X 750mm X 850mm + 100mm Included Splash Back 100-Assembled Top & Sink14 swg 304 with Splash Back withSS Angle Frame 304 32mm x 32mm,Undershelves 18 swg 304, SS Sq Legs 14 Swg 304 with Nylon Feet Adjustable, to be provided sound deadenedrubberised, To be done Top & Undershelves Arc Welding & Argon WeldingWork etc. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge(Excluding GST)
54	(DW-6)-SUPPLYING, FITTING & FIXING OF SS CLEAN DISH RACK 5 SHELVES OF SIZE 1200mm X 450mm X 1800mm- Assembled All Shelves 14 swg 304withSS Angle Frame 304 ( 32mm x 32mm), SS Sq Legs 14 Swg 304 with Nylon Feet Adjustable, to be provided sound deadenedrubberised, To be done Top & Undershelves Arc Welding & Argon WeldingWork etc. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge(Excluding GST)
55	(DW-7)-SUPPLYING, FITTING & FIXING OF SOIL DISH COLLECTION TRIOLELY OF SIZE 900mm X 600mm X 900mm- Assembled All Shelves 14 swg 304withSS Angle Frame 304 ( 32mm x 32mm), SS RoundLegs 14 Swg 304 with Castor Wheels with 2 NosFront Brake, to be provided sound deadenedrubberised, To be done Top & Undershelves Arc Welding & Argon WeldingWork etc. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge(Excluding GST)
56	Pot wash Area
57	(PW-2)-SUPPLYING, FITTING & FIXING OF 3 SHELVES SS POT RACK OF SIZE 1200mm X 450mm X 1500mm- Assembled Outer Pipe14 swgGrade 304 ( 50mm x 50mm), Inner Pipe 14 swg 304 (25mm x 25mm) ,SS Sq Legs 14 Swg 304 with Nylon Feet Adjustable, To be done Top & Undershelves Arc Welding & Argon WeldingWork etc. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge(Excluding GST)
58	Day Store
59	(DS-1)-SUPPLYING, FITTING & FIXING OF MS RACK 5 SHELVESOF SIZE 1050mm X 450mm X 1800mm- MSCoated Shelves14 Swg, Slotted AngleLegs 14 Swg 304 with Nylon, to be provided sound deadenedrubberised. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge (Excluding GST)
60	(DS-2)-SUPPLYING, FITTING & FIXING OF MS RACK 5 SHELVESOF SIZE 1200mm X 450mm X 1800mm- MSCoated Shelves14 Swg, Slotted AngleLegs 14 Swg 304 with Nylon, to be provided sound deadenedrubberised. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge (Excluding GST)
61	(DS-3)-SUPPLYING, FITTING & FIXING OF 3 SHELVES SS PALLETS OF SIZE 1200mm X 450mm X 1500mm- Assembled Outer Pipe14 swgGrade 304 ( 50mm x 50mm), Inner Pipe 14 swg 304 (25mm x 25mm) ,SS Sq Legs 14 Swg 304 with Nylon Feet Adjustable,To be done Top & Undershelves Arc Welding & Argon WeldingWork etc. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge(Excluding GST)
62	(DS-4)-SUPPLYING, FITTING & FIXING OF 3 SHELVES SS PALLETS OF SIZE 1200mm X 450mm X 1500mm- Assembled Outer Pipe14 swgGrade 304 ( 50mm x 50mm), Inner Pipe 14 swg 304 (25mm x 25mm) ,SS Sq Legs 14 Swg 304 with Nylon Feet Adjustable,To be done Top & Undershelves Arc Welding & Argon WeldingWork etc. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge (Excluding GST)
63	Locker & Changing Room
64	(LCR-1)-SUPPLYING, FITTING & FIXING OF MS LOCKER OF SIZE 1200mm X 450mm X 1500mm- AssembledMs Covering Body 16 swg & under Shelves 14Swg , Doors 16 Swg, All LockersKey Arragements , Powder CoatingFull Body & Shelves,To be done Top & Undershelves Arc Welding & Argon WeldingWork etc.including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge(Excluding GST)
65	SS Exhust Hood
66	(EH-1)-SUPPLYING, FITTING & FIXING OF EXHAUST HOOD WITH BAFFLE FILTERSOF SIZE 2800mm X 750mm X 500mm-Assembled SS Body 14 swg 304withSS Angle Frame 304 ( 32mm x 32mm),SS 16 swg Grade 304Baffle Filtres , SS16 swg 304Drip Tray for Oil Collector, To be done Body Arc Welding & Argon WeldingWork etc. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge.(Excluding GST)
67	(EH-2)-SUPPLYING, FITTING & FIXING OF EXHAUST HOOD WITH BAFFLE FILTERSOF SIZE 1200mm X 900mm X 500mm-Assembled SS Body 14 swg 304withSS Angle Frame 304 ( 32mm x 32mm),SS 16 swg Grade 304Baffle Filtres , SS16 swg 304Drip Tray for Oil Collector, To be done Body Arc Welding & Argon WeldingWork etc. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge.(Excluding GST)
68	(EH-3)-SUPPLYING, FITTING & FIXING OF EXHAUST HOOD WITH BAFFLE FILTERSOF SIZE 1350mm X 900mm X 500mm-Assembled SS Body 14 swg 304withSS Angle Frame 304 ( 32mm x 32mm),SS 16 swg Grade 304Baffle Filtres , SS16 swg 304Drip Tray for Oil Collector, To be done Body Arc Welding & Argon WeldingWork etc. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge.(Excluding GST)
69	(EH-4)-SUPPLYING, FITTING & FIXING OF EXHAUST HOOD WITH BAFFLE FILTERSOF SIZE 1200mm X 650mm X 500mm-Assembled SS Body 14 swg 304withSS Angle Frame 304 ( 32mm x 32mm),SS 16 swg Grade 304Baffle Filtres , SS16 swg 304Drip Tray for Oil Collector, To be done Body Arc Welding & Argon WeldingWork etc. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge.(Excluding GST)
70	(EH-5)-SUPPLYING, FITTING & FIXING OF EXHAUST HOOD WITH BAFFLE FILTERSOF SIZE 1500mm X 650mm X 500mm-Assembled SS Body 14 swg 304withSS Angle Frame 304 ( 32mm x 32mm),SS 16 swg Grade 304Baffle Filtres , SS16 swg 304Drip Tray for Oil Collector, To be done Body Arc Welding & Argon WeldingWork etc. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge.(Excluding GST)
71	(EH-6)-SUPPLYING, FITTING & FIXING OF EXHAUST HOOD WITH BAFFLE FILTERSOF SIZE 1800mm X 600mm X 500mm-Assembled SS Body 14 swg 304withSS Angle Frame 304 ( 32mm x 32mm),SS 16 swg Grade 304Baffle Filtres , SS16 swg 304Drip Tray for Oil Collector, To be done Body Arc Welding & Argon WeldingWork etc. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge.(Excluding GST)
72	(EH-7)-SUPPLYING, FITTING & FIXING OF EXHAUST HOOD WITH BAFFLE FILTERSOF SIZE 1200mm X 750mm X 500mm-Assembled SS Body 14 swg 304withSS Angle Frame 304 ( 32mm x 32mm),SS 16 swg Grade 304Baffle Filtres , SS16 swg 304Drip Tray for Oil Collector, To be done Body Arc Welding & Argon WeldingWork etc. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge.(Excluding GST)
73	SS Grating
74	(GR-1)-SUPPLYING, FITTING & FIXING OF SS GRATING WITH PERFORATED TRAY OF SIZE 300mm X 300mm X 25mm- Assembled Outer Pipe14 swgGrade 304 (32mm x 32mm), Inner Pipe 14 swg 304 (25mm x 25mm) , SS 14 Swg 304 Perforated Tray , SS 11 swgGarde 304 Angle Frame 32mm X 32mmTo be done Arc Welding & Argon WeldingWork etc. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge (Excluding GST)
75	(GR-2)-SUPPLYING, FITTING & FIXING OF SS GRATING WITH PERFORATED TRAY OF SIZE 600mm X 300mm X25mm- Assembled Outer Pipe14 swgGrade 304 (32mm x 32mm), Inner Pipe 14 swg 304 (25mm x 25mm) , SS 14 Swg 304 Perforated Tray , SS 11 swgGarde 304 Angle Frame 32mm X 32mmTo be done Arc Welding & Argon WeldingWork etc. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge. (Excluding GST)
76	(GR-3)-SUPPLYING, FITTING & FIXING OF SS GRATING WITH PERFORATED TRAY OF SIZE 900 0mm X 300mm X 25mm- Assembled Outer Pipe14 swgGrade 304 (32mm x 32mm), Inner Pipe 14 swg 304 (25mm x 25mm) , SS 14 Swg 304 Perforated Tray , SS 11 swgGarde 304 Angle Frame 32mm X 32mmTo be done Arc Welding & Argon WeldingWork etc. including cost of all labour, cost of materials ,cost oftransportation, loading and un-loading etc complete in all respect as per direction of Engineer-in-Charge (Excluding GST)
77	Exhaust System
78	SUPPLYING, FITTING & FIXING OF EXHAUST FAN: Providing & Fixing on site 5 HP fan direct drive centrifugal - S.I.S.W Fan to have backward inclined blades impellers should be statically and dynamically balanced . 960 RPM -makes of siemens , crompton, or equivalent. fan motor have squirrel cage , to operate on 3 Phase50HZ ac supply with necessary rain protective cover for motor with necessary rain Protective cover for motor with galvanized sheet. Motor suitable to run for 2 hours a day continuously with effciency of 85% to 90% including cost of all labour, ,Cost of all materials,cost of transportation,loading,um-loading etc. complete in allrespect as per direction of engineer-in-charge. (Excluding GST)
79	SUPPLYING, FITTING & FIXING OF M.S.STANDS FOR EXHAUST Air Fan -Size to be compatable to the blower fan. Stand should be painted with 2 coat of zinc chromate primer and 2 coats epoxy paint. Entire stand to be well made - with all excessive burrs well griounded & finished & then suitably galvanised i ncluding cost of all labour, cost of all materials,cost of transportation,loading,um-loading etc. Complete in allrespect as per direction of engineer-in-charge. (Excluding GST)
80	SUPPLYING, FITTING & FIXING OF ANTI -VIBRATION PADS: Providing and Fixing Heavy Duty-Dunlop Make Anti Vibration Pads of Suitable Height Under the fan -each suitable to take load of 250 kg Including cost of all labour, ,Cost of all materials,Cost of Transportation,Loading,um-loading etc. Complete in allrespect as per direction of engineer-in-charge. (Excluding GST)
81	SUPPLYING, FITTING & FIXING OF DUCTING WORKS: Ducting Works to be Fabricated from 22 G.G.I Sheet complete with supports brackets , felt packing , etc sheets to be of Jindal /sail make only -preferably Jindal Ducts to be of 18g but where necessary adequate m.s.angle frameworks to be cleaned and properly galvanised must be provided for larger ducts to hold up the inner side from not caving in during operations. All ducting should be of flange type construction - unless specifically asked - to be of slip type construction. All nut bolts used should be of isi approved -zinc coated type. Low duct velocities to take care of noise Providing & Fixing on site 5 HP fan direct drive centrifugal - S.I.S.W Fan to have backward inclined blades impellers should be statically and dynamically balanced . 960 RPM -makes of Siemens , Crompton, or Equivalent. Fan motor have squirrel cage , to operate on 3 Phase50HZ ac Supply with Necessary rain protective cover for motor with necessary rain Protective cover for motor with galvanized sheet. Motor suitable to run for 2 hours a day continuously with effciency of 85% to 90% including cost of all labour, ,cost of all materials,cost of Transportation,loading,um-loading etc. Complete in allrespect as per direction of engineer-in-charge (Excluding GST)
82	SUPPLYING, FITTING & FIXING OF CANVAS CONNECTIONS All Fan Canvas Connection should be of thick Canvasand should have Double canvas Flange - so as to Prevent rats and other rodents eating into it (would be provided with SS Mesh all Around ) Wire Mesh of T-304 Stainless Steel Quality , Wire Diameter 1.1938 MM, 4 X 4 wires per 2.54 CM with opening Providing & Fixing on site 5 HP fan direct drive Centrifugal - S.I.S.W Fan to have backward inclined blades impellers should be Statically and Dynamically balanced . 960 RPM -makes of Siemens , Crompton, or Equivalent. Fan Motor have squirrel cage , to operate on 3 Phase50HZ ac Supply with Necessary rain Protective cover for Motor with Necessary rain Protective Cover for Motor with Galvanized sheet. Motor suitable to run for 2 hours a day continuously with Efficiency of 85% to 90% including cost of all labour, ,cost of all Materials,cost of Transportation,Loading,Un-Loading etc. Complete in allrespect as per direction of engineer-in-charge. (Excluding GST)
83	Fresh Air System
84	SUPPLYING, FITTING & FIXING OF TUBE AXIAL FAN 3 PH ,2 HP , 1440 RPM.Capacity of fans to be of 5500 CMF each for 2 HP at static pressure of 1.5" WG .Impeller to be Statically & Dynamically Balanced- Complete with Mounting Arrangement of -GMS CRC Sheet. Motor Must be of 1 HP makes of Bharat Bijlee / Crompton / Siemens /Wquivalent. Body of Fan to be of 3 MM thick M.S.Duly Rustproofed & painted with epoxy paint on outside motor suitable to run for 2 hours a day Continuisly with efficiency of 85 % at full load. Providing & fixing on site 5 hp fan direct drive centrifugal – S.I.S.W. Fan to Have Backward Inclined Blades Impellers Should be Statically and Dynamically Balanced . 960 RPM -Makes of Siemens , Crompton, or Equivalent. Fan Motor have Squirrel Cage , to Operate on 3 Phase50HZ Ac Supply with Necessary Rain Eotective Cover for Motor with Necessary Rain Protective Cover for motor with galvanized sheet. Motor suitable to run for 2 hours a day continuously with effciency of 85% to 90% including cost of all labour, ,cost of all Materials,cost of Transportation,loading,um-loading etc. Complete in allrespect as per direction of engineer-in-charge. (Excluding GST)
85	SUPPLYING, FITTING & FIXING OF FRESH AIR DUCTING WORKS: Ducting Works to be Fabricated from 20 G.G.I.Sheets Complete with Supports , Brackets , Felt Packing , etc sheets to be of jindal/sail make only- preferably jindal.providing & fixing on site 5 HP fan direct drive centrifugal - s.i.s.w Fan to have Backward Inclined Blades Impellers should be Statically and Dynamically Balanced . 960 RPM -makes of Siemens , Crompton, or Equivalent. Fan motor have Squirrel Cage , to Operate on 3 Phase50HZ ac Supply with Necessary Rain Protective cover for Motor with Necessary rain Protective cover for Motor with Galvanized sheet. Motor Suitable to Run for 2 hours a day Continuously with Effciency of 85% to 90% Including cost of all Labour, ,Cost of all Materials,Cost of Transportation,Loading,Un-loading etc. Complete in allrespect as per direction of Engineer-in-charge.. (Excluding GST)
86	SUPPLYING, FITTING & FIXING OF FRESH AIR GRILL All Ducting should be of Flange type Construction . All Nut bolts used should be ISI approved -Zinc coated type Low duct Velocities to take care of NoiseProviding & Fixing on site 5 HP fan direct drive centrifugal - S.I.S.W Fan to Have Backward Inclined blades Impellers should be Statically and Dynamically Balanced . 960 RPM-makes of Siemens , Crompton, or Equivalent. Fan motor have squirrel cage , to operate on 3 Phase50 HZ Ac Supply with Necessary rain Protective cover for Motor with Necessary rain Protective Cover for motor with Galvanized sheet. Motor Suitable to Run for 2 hours a day Continuously with effciency of 85% to 90% including cost of all labour, ,cost of all materials,cost of Transportation,Loading,un-loading etc. Complete in allrespect as per direction of Engineer-in-charge.. (Excluding GST)
87	SUPPLYING, FITTING & FIXING OF CANVAS COUNTER FLANGES All Fan Canvas Connections should be of Thick Canvas and should have Double canvas Flange - so as to Prevent rats and other Rodents eating into it ( Would be Provided with SS mesh all around ) Wire mesh of T-304 Stainless Steel quality , wire diameter 1.1938 MM , 4 X 4 wires per 2.54 CM with opening of 5.16 MM providing & Fixing on Site 5 HP fan Direct Drive Centrifugal – S.I.S.W. Fan to have backward Inclined Blades Impellers should be Statically and Dynamically balanced . 960 RPM -makes of Siemens , Crompton, or equivalent. Fan Motor have squirrel cage , to operate on 3 Phase50HZ Ac Supply with Necessary rain Protective cover for Motor with Necessary rain Protective cover for motor with galvanized sheet. Motor suitable to run for 2 hours a day continuously with effciency of 85% to 90% including cost of all labour, ,cost of all materials,cost of Transportation,Loading,Un-Loading etc. Complete in Allrespect as per Direction of Engineer-in-charge(Excluding GST)
88	SUPPLYING, FITTING & FIXING OF GAS LINE SYSTEM ( LPG) With TATA/JINALGas Pipe withall necessary filter 10 Cyclinder Manifold , Burner Pital ,Cylinder Pital with Labour Charges. Total Pipe Line 100 ft LumsumProviding & Fixing on site 5 HP Fan direct drive Centrifugal - S.I.S.W Fan to have backward Inclined Blades Impellers should be Statically and Dynamically balanced . 960 RPM -makes of Siemens , Crompton, or Equivalent. Fan motor have Squirrel cage , to operate on 3 Phase50HZ ac supply with necessary rain Protective cover for Motor with Necessary rain Protective cover for motor with galvanized sheet. Motor suitable to run for 2 hours a day continuously with Efficiency of 85% to 90% including cost of all Labour, ,cost of all Materials, cost of Transportation,Loading,Un-loading etc. Complete in All respect as per direction of Engineer-In-Charge.(Excluding GST)