|
| 1 | CIVIL WORKS (ITEM NO.10 TO 890)EARTH WORK IN EXCAVATION- Earth work excavationin all types of soil, includingsoft or hard murrum, but excluding soft and hard rock, using mechanical means (Hydraulic Excavators)/ Manually for depth upto 1.5m, including cutting and dressing of sides in slopes, levelling, grading and ramming of bottoms, and stacking of excavated material within a lead of 100m, including providing temporary supports to existing facilities, viz., service lines like pipes, cables, etc. all complete as per the specifications and directions of Engineer-in-Charge. |
| 2 | DISMANTLING OF TILES: Dismantling of antiskid / mosaic / moasaic dado tiles along with bed mortar upto 20 mm thick in floors and walls laid in any cement mortar upto second floor stacking of serviceable materials and disposal of unserviceable materials within 1 Km lead including all scaffoldings, tools and tackles etc. complete |
| 3 | DISMANTLING OF BRICK WORK: Dismantling of Brick work/ lime mortar/ weathering course of any mortar in foundation and super structure including disposal of unserviceable materials upto 1 km lead as directed . |
| 4 | DISMANTLING OF PCC: Dismantling PCC cement concrete in foundation and super structure including disposal of unserviceable material upto 1.0 km lead as directed including all labour, tools, scaffoldings etc. complete. |
| 5 | MAKING CHASING IN WALLS: Cutting/making opening/ chasing in brick wall/ dado for removal of existing corroded GI pipe line/ installation of sanitary lines through wall by using cutting/ drilling Machine. The cost includes removal of old GI lines from walls, cleaning of surface etc. complete including all tools and tackles, labours, scaffoldings, materials and disposing upto 1 Km lead. |
| 6 | PLASTERING: Providing 12mm thick plaster in cement mortar 1:4 (1 cement : 4 sand) on walls/ concrete surfaces including cleaning, hacking of concrete surfaces, scaffolding, finishing, curing etc., for all heights. |
| 7 | BRICK MASONARY: Providing and laying BRICK MASONRY with bricks of Class 7.5 in cement mortar 1:4 (1 Cement: 4 fine aggregate (M Sand))for allheightsincluding the cost of materials, labour, tools and tackles, scaffolding/staging, sampling and testing, soaking of bricks, cutting and laying of bricks,making openings of any shape and size, sealing the gap between masonry and soffit of beam/slab, embedding the fittings,curing, etc. all complete as per specifications, and as directed by Engineer-in-Charge. |
| 8 | HALF BRICK MASONARY :Providing and laying HALF BRICK MASONRY in cement mortar 1 : 4 (1 Cement : 4 fine aggregate (M Sand)) for all depths and heightsincluding cost of materials, labour, scaffolding, sampling, testing, supplying and placing 2 no. 6 mm dia. diarebars at every third course, sealing the gap between masonry and soffit of the beam / slab, embedding the fittings and fixtures, curing, etc. all complete as per specifications, and as directed by Engineer-in-Charge.(Note:- The cost of Reinforcement shall be paid seperately under relevant items). |
| 9 | PCC: Providing and laying plain cement concrete 1:4:8 (1 part of cement, 4 part of fine aggregate (M sand) and 8 part of stone aggregate 40 mm nominal size) in foundation below footing floor and raft and trenches using stone aggregate including watering, curing ramming with vibrator if necessary all labor and material complete ) as per direction of engineer in charge but excluding cost of form work |
| 10 | RCC: Providing and laying in position 1:1.5:3 [1cement: 1.5 sand: 3 coarse aggeragate] nominal mix concrete with 20 mm/ 12.5 mm and down aggregatesfor reinforced cement concrete work with Dr. fixit or equivalent water proofing compound as per manufacturer specification for all heights including all labours, tools and tackles, curing etc. complete |
| 11 | CENTERING & SHUTTERING: Providing and fixingCENTERING AND SHUTTERING for all heights including strutting, bracing, propping, etc. keeping the same in position during concreting and de-shuttering & removal of the same after specified period as per specifications,keeping necessary provision for inserts, projecting dowels, or any other fixture, etc. all complete and as specified and directed by Engineer-in-Charge complete with all tools and tackles, materials, labour charges, consumables, etc. (Form work shall be supplied by the contractor and shall remain the property of the contractor) |
| 12 | REINFORCEMENT: Supplying, fabricating and placing in position HIGH STRENGTH DEFORMED STEEL BAR REINFORCEMENT of grade Fe500 for RCC work, straightening, cleaning, decoiling, cutting, bending to required shapes and lengths as per details, binding with contractor\"s own 16 Standard Wire Gauge (SWG) black soft annealed binding wire at every intersection, supplying and placing with proper cover blocks, supports, overlaps, chairs, spacers, lifting hooks, etc. for all heights & depths, etc. all complete as directed by Engineer-in-Charge. |
| 13 | M SAND: Providing and filling fine aggregate (M-sand) of approved quality in floor, foundation etc. in layer of 15 cm thickness including, watering, ramming, consolidating etc. complete. |
| 14 | FRP FRAME: Providing and fixing FRP frame of 100mm x 75mm with solid wood for doors,windows shutter/frame work with necessary fixtures and fastenings including necessary hold fasts, including making necessary grooves, grouting, including making good all damaged portion done with all labour, material etc. complete. The joints between wall and FRP frame to be sealed with FRP paste leaving no gaps. |
| 15 | FRP DOOR SHUTTERS: Supplying and fixing of 30mm thick FRP door shutters in any colour, it consists of shutter frame made out of country wooden frame (Solid wood) for stiles, top, bottom and lock rails and wooden frame shall be covered with 4mm thick of FRP including providing and fixing of S.S. Hinges of 4 inches long 3 Nos., Aluminum aldrop 150mm long 1 No., Aluminum tower bolt 150mm long 2 Nos. and PVC door push 50mm long 1 No. and Aluminum handles minimum 150 mm long 2 Nos. |
| 16 | FLOOR TILES OF SIZE 600 X 600 MM AND ABOVE : Providing and laying premium quality polished vitrified floor tiles of size 600 x 600 mm and above MATT or GLOSS finish of make Johnson / kajaria / somany / nitco in all colors and shades approved by EIC, laid on 20 mm thick cement mortar 1: 4 ( 1 cement : 4 fine aggregate (M sand)) including water proofing compound Dr. fixit or equivalent as per manufacturer specification, grouting the joints with white cement and matching pigments etc.,& pointing the joints,pointing with white cement and matching pigment etc., complete for all heights. |
| 17 | FLOOR TILES BELOW 600X 600 MM: Providing and laying premium polished vitrified floor tiles of size 400x 400 mm or 395 x 395 mm or 300 x 300 mm or more but below 600 x 600 MM,anti skid type / gloss finish of make Johnson / kajaria / somany / nitco in any colors and shades as approved & directed by EIC, laid on 20 mm thick cement mortar 1: 4 ( 1 cement : 4 fine aggregate (M sand) including water proofing compound Dr. fixit or equivalent as per manufacturer specification, grouting the joints with white cement and matching pigments etc.,& pointing the joints,pointing with white cement and matching pigment etc., complete for all heights. |
| 18 | WALL TILES: Providing and fixing premium ceramic glazed wall tiles of approximate size 300x 300mm or 300 x450 or more as per direction of EIC of approved make JOHNSON, NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in any colours/shades of any size as approved by Engineer in-charge over 12 thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), with water proofing compound in liquid form of Dr. Fixit or equivalent and jointing with grey cement including pointing in white cement mixed with pigment of matching shade including providing necessary PVC edge beading etc. complete for all heights.including matching border & motive tile. |
| 19 | WHITE WASHING: Supplying and applying three coats of white washing with lime including cleaning and surface preparations, scaffolding to any height etc. with all labour and material complete. |
| 20 | INTERIOR EMUSLION:Supplying and applying painting the wall with three[ 1 coat primer+full wall putty+ 2 coat paint] coats of interior Acrylic emulsion paint of M/s. Asian Paints or equivalent in M/s. ICI, M/s Nerolac, M/s Berger etc. brand in any shades and colour with full wall cement based wall putty as directed including cleaning and preperation of the surface, with scraping using suitable emery sheet, scaffolding toany height with all labour and material etc. Complete. |
| 21 | EXTERIOR EMULSION: Supplying and applying painting the wall with three[ 1 coat primer+ 2 coat paint] coats of exterior Acrylic emulsion paint of M/s. Asian Paints- apex or equivalent in M/s. ICI, M/s Nerolac, M/s Berger etc. brand in any shades and colour including one coat primer, and filling cracks/ gaps with cement based wall putty as directed with all cleaning and preperation of the surface, including scraping using suitable emery sheet, scaffolding toany height with all labour and material etc. Complete. |
| 22 | SYNTHETIC ENAMEL PAINTING: Supplying and applying synthetic enamel paint on MS door frame, window frame, Grills, wall etc. with two coat of paint of M/s. Berger Paints, M/s. Asian Paints and M/s. ICI or equivalent brand in any shades and colour as directed including cleaning and preperation of the surface, with scraping using with suitable emery sheet, scaffolding toany height with all labour and material etc. Complete. |
| 23 | ENAMEL PRIMER: Supplying and applying 1 coat zinc chromate primer of M/s. Berger Paints, M/s. Asian Paints and M/s. ICI or equivalent brand in any shades and colour as directed including cleaning and preperation of the surface, with scraping using with suitable emery sheet, scaffolding toany height with all labour and material etc. Complete. |
| 24 | UPVC PIPES FOR PLUMBING WORKS: Supplying, laying and fixing rigid heavy duty UPVC pipe of SCH 40 for water line/ Drain lines of reputed make like Ashirvad/TATA/Finolex/Jain or equivalent in floors, walls with necessary specials jointing such as bends, elbows, tees, reducers, sockets, union and other specials fittings in floors and walls (open/concealed type) with jointing including inserting in wall and fixed with neccessary GI clamps, cutting the pipes to required length making connections, threading, or holes in wall and making good the same and testing etc. complete. |
| 25 | 3/4th inch pipe |
| 26 | 1.5 inch pipe |
| 27 | 2.0 inch pipe |
| 28 | CPVC PIPES FOR PLUMBING WORKS: Supplying and laying 3/4 inch CPVC pipe Class 1 for Hot/ cold water plumbing lines of reputed make like Ashirvad/TATA/Finolex/Jain or equivalent in floors, walls with necessary specials jointing such as bends, elbows, tees, reducers, sockets, union and other specials fittings in floors and walls (open/concealed type) with jointing including inserting in wall and fixed with neccessary GI clamps, cutting the pipes to required length making connections, threading, or holes in wall and making good the same and testing etc. complete. |
| 29 | PVC PIPES FOR PLUMBING WORKS: Supplying, laying and Heavy duty PVC pipe 6 Kg pressure for plumbing lines of reputed make like TATA/Finolex/Jain or equivalent in floors, walls with necessary specials jointing such as bends, elbows, tees, reducers, sockets, union, door type Tees/Y\"s/Bend and other specials fittings in floors and walls (open/concealed type) with jointing including inserting in wall and fixed with neccessary GI clamps, cutting the pipes to required length making connections, threading, or holes in wall and making good the same and testing etc. complete. |
| 30 | 2.5 inch dia pipe |
| 31 | 4 inch dia pipe |
| 32 | 2\" BRASS GATE VALVE: Supplying, and fixing brass gate Valve of 2\" dia of EGO/ Leader or equivalent make for all heights including making necessary isolations etc. complete |
| 33 | HAND WASH BASIN: Proving and fixing white vitreous china wash basin of approximate size 560x430x185 mm of make Johnson (model no. P5115PW) / hindware / parryware or equivalent as directed by EIC along with 600 mm waste hose, CP brass waste coupler, Ange valve ( Johnson- model No. T3410C or Equivalent of reputed make), Fisher bolts/ clamps etc complete. |
| 34 | OVAL TYPE HAND WASH BASIN: Proving and fixing white vitreous china wash Oval basin counter top type of approximate size 560x455x200mm of make Parryware lead N(C0483) model or equivalent in Johnson / hindware / Jaguar/ Roca etc. or equivalent as directed by EIC along with 600 mm waste hose, CP brass waste coupler, Ange valve ( Johnson- model No. T3410C or Equivalent of reputed make), etc complete. |
| 35 | WASH BASIN TAP: Supplying and fixing of Pillar cock of make JaguarFON-CHR-40011 or equivalent |
| 36 | SHOWER ROSE WITH SHOWER ARM: Providing and fixing Shower arm (S0001C7) and Shower Rose 200 mm dia (S1731C) of make Johnson or approved equivalent as directed by EIC |
| 37 | HEALTH FAUCET: Supply and fixing brass health faucet coated with SS finish of make Johnson (model No. S0030C) or approved equivalent as directed by EIC with necessary fittings, hose and labor etc. complete |
| 38 | BRAIDED HOSE FOR GEYSER CONNECTION: Supply and fixing polymer braided connecting hoses with washers, rings fixtures etc. for hot or cold water from geyser etc. of jaguar/ watertech or equivalent make as directed by EIC with necessary fittings, etc. complete |
| 39 | H NIPPLES: Supply and fixing of GI H nipple threaded of size 1/2 inch for plumbing fitting as directed by EICetc. complete |
| 40 | TWO IN ONE TAP: Supply and fixing of make two in one tap of make Johnson (model No. T0412C) or approved equivalent as directed by EIC with necessary fittings,labor etc. complete |
| 41 | GLASS SHELF: Providing and fixing 600x120x5 mm glass shelf of toughned glass with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 42 | CORNER STAND: Supplying and fixing offrosted glass Toughened corner stand (Wall Mounted) chrome plated railings in bathroom of minimum size 12 inch x 12 inch including all fittings and fixtures etc. complete. |
| 43 | GRANITE COUNTERS/ PARTITIONS: Providing and fixing Granite Stone of approved shade slab with table rubbed, edges rounded and polished, nosing) for fixing in urinal partitions/ Granite counters including making all chasing of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth |
| 44 | URINAL: Providing and fixing white urinal basin of make Johnson(model no P0519PW) / hindware / jaguar of size 390 x 390 x 610 mm along with Urinal concealed valve (Johnson T 0677C or equivalent), Connecting hoses, clamps, spray nozzles etc. complete. |
| 45 | WESTERN WATER CLOSET: Providing and fixing white vitreous china pedestal type water Closet (Western type) water closet pan of Dimensions 570 x 365 x 400mm make Johnson (model No. P0547PW) / hindware / parryware or equivalent along with necessary trap, fittings, with 10 litre low level white P.V.C. flushing cistern, including flush pipe,seat covers, with manually controlled device (handle lever), conforming to IS :7231, with all fittings and fixtures, angle valve, hose complete, including cutting and making good the walls and floors wherever required :including dismantling of exisitng IWC/EWC,clearing sand cushion, P & S trap, connecting pipe linesand disposing the unserviceable material at the designated place of disposal including all labour tools etc complete |
| 46 | FLOOR TRAP :Supplying and fixing of heavy duty 4\" dia 2 way/ 4 way PVC Multi floor traps without Jali of reputed make i.e. Finolex or equivalent |
| 47 | COCKROACH TRAP: Supplying and fixing of heavy duty 4\" SS-304 grade cockroach trap with necessary Jali, cup, trap etc. complete |
| 48 | INDIAN WATER CLOSET: Providing and fixing white vitreous orissa pedestal type water closet(Indian type W.C. pan Model No. Parryware Dimensions 580x445x300 mm or equivalent) with 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS :7231, with all fittings and fixtures, angle valve, hose complete, including cutting and making good the walls and floors wherever required :including dismantling of exisitng IWC/EWC,clearing sand cushion, P & S trap, connecting pipe linesand disposing the uncerviceable material at the designated place of disposal including all labour tools etc complete |
| 49 | TOWEL ROD: Supply and fixing of towel rod in SS 304 of make Johnson(model no. T1350C) or equivalent as per EIC |
| 50 | BOTTLE TRAP: Supply and fixing of bottle traps of make Johnson(model no. T0060C) or equivalent for wash bash basinas per direction of EIC |
| 51 | ANGLE VALVE: Supply and fixing of angle valve of make Johnson( Ange valve ( Johnson- model No. T3410C or Equivalent of reputed make) for geysers oras per direction of EIC |
| 52 | UPVC BALL VALVE: Supply and fixing of 3/4\" UPVC ball valve of make Ashirvaad or Equivalent reputed make |
| 53 | INSECT SCREENS: Supplying and fixing of Insect screens with shutter type doors(Aluminium with SS mesh) with all rippers, locks, handles hinges etc.with all materials and labours etc. complete such that there is nogaps between existing window/ ventilator frame for insects/mosquitoes;for all heights etc., complete. |
| 54 | REPLACEMENT OF VENTILATOR SHUTTERS: Removing of existing ventilator shutters and refixing new ventilator shutters of country wood (Padak or Kongu) frame with 5.5 mm thick glass, with two coats of synthetic enamel paint over a coat of primer on the shutter frame, with necessary hinges, tower bolt, handles etc. complete. The new shutter fitted should properly sit on the existing frame without any gap. |
| 55 | REPLACEMENT OF DAMAGED GLASS IN WINDOWS/ VENTILATORS: Renewing glass panes and refixing existing wooden fillets: Float glass panes of nominal thickness 5.5 mm plain glass using putty/ wooden beading/ rubber beading for all heights |
| 56 | WOODEN FRAMES: Providing and fixing I-class country wooden frame of doors shutter/frame, window shutter/ frame, cupboards and air conditioners frame work with necessary fixtures and fastenings including necessary hold fasts, applying two coats of Coal Tar preservatives on the sides in contact with wall for frame including scantling,making necessary grooves, grouting, including making good all damaged portion done with all labour, material etc. complete. Including removing the old damaged wooden/steel frame and door / window shutter and disposing the same etc., complete for all heights |
| 57 | DOOR CLOSER: Providing and fixing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete. |
| 58 | EXISTING WINDOW/ VENTILATOR GRILLS MODIFICATION: Removing of existing Grills of windows/ ventilators for Modification/ Repairs of frames and refixing the same with necessary bolts/ fixtures etc. complete. |
| 59 | DISMANTLING OF STRUCTURAL STEEL WORKS: Dismantling of structural steel works(bolted/riveted/welded) of all descriptions(taking all necessary safety precautions) for all heights & depths above & below plinth level including supply of all tools & tackles, consumables, necessary scaffolding etc. providing temporary bracings as required, cutting gusset plates, bolts, nuts, weldings etc, stacking of serviceable materials at designated location /CPCL storage Yard/scrap yard within the Refinery premises as per direction of Engineer-in-Charge. |
| 60 | FABRICATING AND ERECTION OF STRUCTURAL STEEL WORKS: Supplying, transporting, storing, fabricating & erecting in position bolted and / or welded STRUCTURAL STEEL WORKS like angles ,channels, beams, plates, pipes, tubes etc.at all heights & levels and locations including all builtup sections/ compound sections made out of rolled sections and / or plates / bent plates in existing / new structural pipe supports, frames, etc., cutting to required size, straightening/bending if required, edge preparation,cleaning, scrapping & welding of unsound joints in existing structural members, preheating, (including sealing of box section with continuous welding) finishing edges by grinding , fixing in line and level with temporary bracings, including providing staging, scaffoldings, & working platforms at all heights, and removal of same after erection,including preparing the surface for painting , surface cleaning, wire brushing, removal of mill scale, dust, rust, oil or grease etc complete along with providing paint system as follows:(a) Applying inorganic zinc silicate coat 50 micron DFT(b) Two coats of Epoxy primer paint 50 micron DFT each(c) Two coats of Anti Rust epoxy top coat paint 75 micron DFT each as per manufacturer\"s specifications and as directed by Engineer-in-Charge. NOTE:-One coat of Zinc silicate and one coat of Epoxy primer shall be applied on structural steel surfaces after manual cleaning prior to erection as per specifications & as directed by Engineer-in-charge. Supply of all materials in contractor\"s scope. |
| 61 | REPLACEMENT OF SHUTTERS: Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 62 | WATER TANK LEVEL INDICATOR: Supplying and installation of heavy duty water tank level guage with water level indication ( 3 levels- low, middle and high) and alarm system for over flow. The height of the tank shall be considered above 2 nd floor level for length of signal cables) |
| 63 | BRASS FLOAT VALVE: Supplying and installation of brass heavy duty float valve set of 2\"diameter( 2\" brass valve, brass rod set, PVC Float ball) of viking or equivalent reputed make for water tanks including all reducers fittings etc. complete |
| 64 | CURTAIN RODS: Supplying and installation of CP curtain rods 20 MM Diameter with 100 mm long CP brackets (2 nos.) for each room windows. |
| 65 | CURTAINS: Supplying and installation of cotton stitched curtains in any shade and design with 99% blackout thick backing cloth, thermally insulated with CP eylet rings in the curtain for sliding over the curtain rod. The curtain shall be having velcrow for tying. |
| 66 | NAVOPAN: Providing and fixing of 12mm thick Navopan both side colour laminated sheets as per the manufactures specification, including cutting, fixing in position, to wooden door shutters removing the damaged old Navopan sheet with all labours and materials etc., complete. For all heights. |
| 67 | CUBBOARD LOCKS: Supplying and fixing of Locks with 2 keys for cub boards of Goodrej or equivalent make. |
| 68 | POLYMER MODIFIED REPAIR MORTARS: - Repairing surface irregularities: damaged concrete, if any, with Latex modified repair mortarof make Fosroc / BASF / Sika including a coat of bonding agent at required places or defects in concrete surfaces. |
| 69 | BOND COAT: Providing and applying approved EPOXY RESIN (prepared as per manufacturer\"s recommendation) for bonding of fresh concrete to old concrete in all types of structure at all depths and heights including cleaning of concrete surface, removing of all loose concrete pieces, making rough by chiseling, taking off the skin of concrete, application of Epoxy Resin System by spraying, necessary working platforms, props, scaffolding and other safety measures, removal of same after completion etc. all complete. |
| 70 | WATER PROOFING OF STRUCTURE: Providing injection type post construction water proofing to concrete structures such as roof slabs, sunken portions, intersection of chajja & masonry, liquid storage tanks, etc. by installing minimum 12/15mm dia PVC / aluminium /GI nozzles at suitable intervals and mechanically injecting single component hydrophobic water-active flexible polyurethane of approved make at minimum pressure of 3 kg/sqcm as per manufacturer\"s recommendations. The rate shall include all materials, labor and operations and finishing, dismantling & assembling of false ceiling / under deck insulation works if any, making temporary water pool over the leaky portion and removal after work, include the cost of providing fixing and cutting off nozzle projections grouting holes, etc. complete as per the instructions of Engineer-in-Charge. (Only consumed chemical in grouting work to be measured for payment) |
| 71 | MOSAIC POLISHING: Mosaic floor cleaning, grinding and Polishing to obtain mirror finishing using suitable abarsions and chemicals and grinding/ polishing machines for all floors, dado upto 2nd floor height |
| 72 | WOOD POLISH: Staircase Balustrade wood polishing- Providing & applying wood finish coats:Surface preparation using paper 180 and then using and paper 320 and wipe clean, supply and application of one coat of sealer base coat andtwo coats of acid curing solvent based 2 pack of wood finish at an interval of about 24 hours. Sand lightly with and Paper 320 between the two coats. Rate inclusive of filler if required in all heights. Rate includes erection of scaffolding / movable safety harness like parapet anchor, all tools, materials and labor etc. |
| 73 | ROOF SHEET DISMANTLING: Dismantling GI / asbestos / translucent sheets, ridges, gutters, curves, turbo ventilators,etc. in roofing\"s and wall claddings, including supply of all tools & tackles, consumables, cutting (by flame or saw) of fixing hooks, transporting and stacking the serviceable materials, cleaning the site and disposal / handing over of the unserviceable material to scrap yard anywhere within the Refinery premises, including all labor, tools all complete for all levels, as specified and directed. |
| 74 | ROOF SHEET PROVIDING: Providing and fixing color coated Licensee GALVALUMEprofile sheetsof total coated thickness thickness (not less than) 0.5 mm of approved make as certified by BIEC International, Inc. The sheet shall be fixed using self drilling / self tapping screwsof size (5.5x 55 mm) with EPDM seal / bolts of assorted sizes as directed by EIC, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required,all labor, tools supervision, height work / safety permits, safety precaution all complete for all levels, as specified and directed. (size, shape and pitch of corrugation as approved by EIC). Nominal composition of the coating is 55% aluminum, 43.5% zinc and 1.5% silicon by a continuous hot dip process. Corrosion inhibitive primer and a top coat should have been applied on either side of the sheet. For all roof areas including curved profile sheets for corners |
| 75 | RIDGE SHEETS: Providing and fixing color coated Licensee GALVALUME sheet Ridges plain (500 - 600mm) of total coated thickness thickness (not less than) 0.5 mm of approved make as certified by BIEC International, Inc, using self drilling/ self tapping screws,all labor, tools supervision, height work / safety permits, safety precaution all complete for all levels, as specified and directed. Nominal composition of the coating is 55% aluminum, 43.5% zinc and 1.5% silicon by a continuous hot dip process. Corrosion inhibitive primer and a top coat should have been applied on either side of the sheet. |
| 76 | PROVIDING, ERECTION & DISMNATLING OF SCAFFOLDING FOR ALL HEIGHTS: Job involves erection of scaffolding at the required locations using 1-1/2 inch dia steel tubular pipes with suitable clamping arrangement,providing steel gratings, access staircase system at required locations firmly tied on to the scaffolding pipes, removal of the steel gratings & scaffolding materials on completion of the job. The job shall be carried-out as per CPCL Scaffolding procedure. The job also includes supplying of all types of tools & tackles, lifting arrangements like chain pulley blocks, all consumables and labour to complete the job in all respects, supply & transportation of steel scaffolding materials & steel gratings to the work site etc. complete as per directions and approval of Engineer-in-charge. The payment will be made once irrespective of duration of scaffolding. (To be used only for inspection of plumbing works / Exterior wall cracks inspection only ) |
| 77 | ANCHOR FASTENING: Supplying,handling,transporting to site of work and fixing approved CHEMICAL ANCHOR FASTENERS consisting of MS threaded rod of grade 5.8,Galvanised with minimum thickness of 5 microns and chemical (approved for use in cracked concrete), packed in flexible chemical foil or dual foil type, to be used with the help of dispenser, of 16 mm dia at specified positions on concrete floors,roofs,beams( sides and bottom), walls,columns etc. according to manufacturer\"s specifications including all accessories like nuts,washers etc. of required size,testing ,necessary scaffolding,drilling of the holes in concrete surface with electric drill,cleaning of holes with air blowout & wire-brush and making good any damage done to the structure etc. all complete for all heights, depths and locations as specified and directed by Engineer-in-Charge. |
| 78 | SUPPLY OF MACHINERIES: Hiring of machineries on demand basis. The quoted rate is inclusive of charges towards mobilization if any, hire charges, consumables fuel / oils / lubricants, operator crew\"s costs, supervision, overhead & profit, safety permits, safety precaution etc. complete. |
| 79 | For Tractor with trolley |
| 80 | JCB |
| 81 | Tractor Dozer/ Ripper arrangements |
| 82 | Front Cabin mounted Hydra minimum 14 T Capacity |
| 83 | TRIMMING OF TREES: Trimming of trees and cutting of trees branches upto 30 cm girth touching the building/ walls/ car shed areas etc. with necessary tree cutting machine etc complete |
| 84 | CUTTING OF TREES: Felling of trees including cutting of trunks and branches, removing the roots and disposal of unserviceable material outside the refinery premises with all leads and lifts upto Girth < = 60 cm @ 1m above GL |
| 85 | LACQUED ETCHED GLASS: Providing and fixing Urinal/ washbasin partitions of Lacquered Etching Glass of thickness not less than 12mm thick along with necessary fittings design approved by EIC |
| 86 | POST CONTRUCTION TERMITE TREATMENT: Providing and injecting chemical emulsion for Post- Constructional Anti-termite treatment using chemical Imidacloprid 30.5% SC at 2.1ml per litre of water covering entire building internal as well as external wall. The quoted rate shall be inclusive of all tools, tackles, labours, chemical/material cost etc complete. |
| 87 | SKILLED & UNSKILLED WORKMEN: Supply of Skilled and Unskilled various crafts men to carry out petty works not acessable for measurements / minor repair works, on day to day basis from 08:30 to 17:30. The rate shall include payroll costs, all allowance, fringe benefits overhead supervision and profits and hand tools including Working onsundays and National Holidays |
| 88 | Skilled |
| 89 | Unskilled |
| 90 | ELECTRICAL WORKS (ITEM NO.900 TO 1370)Tube light fitting:The scope of work includes supply and fixing of LED L.FIXT ELITE PRIDE PLUS 18 W 6500 K1, Cool Daylight (CDL), Decorative Slim Linear 4’ LED Batten fittings with bulb of havells catalogue or equivalent ,including civil work (if any) required for installation, all complete with labour and materials, as per the specifications of this tender and directions of Engineer-In-Charge. |
| 91 | Socket Outlet:The scope of work includes supply and fixing of 20 amps., 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps, G-series, SP,MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, including connections, testing and commissioning etc. as required, all complete with labour and materials, as per the specifications of this tender and directions of Engineer-In-Charge. Note:ISI marked sockets of approved make shall be used. |
| 92 | 3 phase 6 way distribution board:The scope of work includes Supply, Erection, connecting, testing and commissioning of 3 Phase 6 way Distribution board concealed in wall/partition. The board shall be powder coated with below mentioned provisions and necessary Accessories for DB, all complete with labour and materials, as per the specifications of this tender and directions of Engineer-In-Charge.Note:ISI marked components of approved make shall be used. |
| 93 | With incoming 63A four pole MCB, 63A 30mA ELCB and out going 18 Nos. of 6 / 10 Amps MCB\"s |
| 94 | Supplying and fixing of 16way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/recess, complete with tinned copper busbar, neutral link, eachrth bar, din, bar, detachable gland plate, interconnections, including painting earthing etc.as required. |
| 95 | MCB\"s:The scope of work includes supplying and fixing of 5 amps. to 32 amps, 240/ 415 volts, 50Hz, 10KAminiature circuit breaker (suitable for motor, lighting and other inductive loads and conforming to IS 8828: 1996, IEC 60898: 2002) of following poles in the existing MCB DB with required rails/fastenersfor fixing, including connections, testing and commissioning etc. as required, all complete with labour and materials, as per the specifications of this tender and directions of Engineer-in-Charge. Note: ISI marked MCBs as per approved vendor list attached with the tender shall be used. |
| 96 | Supply |
| 97 | upto 32A, Single Pole |
| 98 | upto 32A, Double Pole |
| 99 | Installation |
| 100 | upto 32A, Single Pole |
| 101 | upto 32A, Double Pole |
| 102 | RCCB:The scope of work includes supplying and fixing of upto 32 A, 30 mA, 2P rating, double pole, (single phase neutral), 240 volts, residual current circuit breaker (RCCB), ISI marked, having a sensitivity current indicated miliamperes in the existing MCB DB with required rails/fastenersfor fixing, including connections, testing and commissioning etc. as required, all complete with labour and materials, as per the specifications of this tender and directions of Engineer-in-Charge. Note: ISI marked RCCB shall be used. |
| 103 | Supply |
| 104 | Installation |
| 105 | Supply of PVC wires:The scope of work includes supply of following size of PVC insulated, copper conductor for laying in the existing surface / recessed, PVC / steel conduit / PVC casing and capping as required, as per the specifications of this tender and directionsof Engineer-In-Charge. Note: Only ISI marked cables shall be used. |
| 106 | 1.5 sq.mm |
| 107 | 2.5 sq.mm |
| 108 | 4 sq.mm |
| 109 | Supply of PVC conduits:The scope of work includes supply of 25 MM PVC conduit alongwith the accessories to be used for installation in surface/concealed as required, as per the specifications of this tender and directionsof Engineer-In-Charge. Note: Only ISI marked conduits shall be used. |
| 110 | Laying of PVC conduit:The scope of work includes fixing of up to 40MM of PVC conduit alongwith the accessories to be used for installation in surface/concealed as required, including cutting the wall and making good the same in case of recessed, as per the specifications of this tender and directionsof Engineer-In-Charge. |
| 111 | Laying of PVC wires:The scope of work includes drawing/laying of following size of PVC insulated, copper conductor for laying in the existing surface / recessed, PVC / steel conduit / PVC casing and capping as required, as per the specifications of this tender and directionsof Engineer-In-Charge. |
| 112 | 1 x 1.5 sq.mm |
| 113 | 2 x 1.5 sq.mm |
| 114 | 3 x 1.5 sq.mm |
| 115 | 1 x 2.5 sq.mm |
| 116 | 2 x 2.5 sq.mm |
| 117 | 3 x 2.5 sq.mm |
| 118 | 2 x 4 sq.mm |
| 119 | Supply and fixing of plastic/metal boxes of following sizes with all accessories including necesssary base frame plates/ mounting plates, etc.,suitable for fixing decorative switches of type roma or equivalent make in Havells/Siemens/Anchor/L&T |
| 120 | 1 or 2 module box |
| 121 | 6 module box |
| 122 | 12 module box |
| 123 | Supply, fixing and connection of modular type of Anchor make (Roma) or approved equivalent switch, socket bell push etc in Havells/Siemens/Anchor/L&T, complete with labour and materials as per direction of the Engineer-in-Charge. |
| 124 | 10 A, 1way switch |
| 125 | 20A, 1 way switch. |
| 126 | 3 pins 5 / 6 amps socket with ISI mark |
| 127 | 3 pins 10/20A, heavy duty uni socket outlet with ISI mark |
| 128 | 3 pins 5 / 6 amps. ISI marked polycarbonate unbreakable plug top |
| 129 | 3 pins 15 / 16 amps. ISI marked polycarbonate unbreakable plug top |
| 130 | Single module Dimmer / fan regulator 450W |
| 131 | PVC battern/Angle Holder |
| 132 | Supply ofM/s Philips or equivalent makeLED BULB 5-6 W for installation in lighting fittings / fixtures as per directions of EIC |
| 133 | CEILING FAN:The scope of work includes supply, installation, testing and commissioning of 1200mm sweep ceiling fan ofBajaj / crompton greaves / khaitan / usha / havells make of following sweep withceiling fan and regulator, including wiring the down rod of standard length (upto 30 cm) with 1.5 sqmm, PVC insulated, copper conductor, single core cable etc., as required,, as per the specifications of this tender and directions of Engineer-In-Charge. |
| 134 | DISMANTLING OF SWITCH & SOCKETS:The scope of work includes dismantling of all types of switches, sockets and plug points without damage and returning them to our stores or any other place or site within the premises as decided by the Engineer-in-Charge, all complete with labour and materials and any other accessories, as per the specifications of this tender and directions of the Engineer-in-Charge. |
| 135 | DISMANTLING OF ELECTRICAL WIRING:The scope of work includes dismantling of Electrical wiring (comprising of single or twin core PVC wires upto 6 Sq mm and single earth wire upto 6 SWG) along with its connected accessories, as per the specifications of this tender and directions of Engineer-In-Charge. |
| 136 | DISMANTLING OF FANS:The scope of work includes dismantling of all types & sizes of ceiling fans with down rod and regulator and exhaust fans of sweep 350/450 mm alongwith shutter, frame etc. without damage and returning them to our stores or any other place or site within the premises as decided by the Engineer-in-Charge. all complete with labour and materials including dismantling of supports of any type, down rods, condensers and any other accessories, as per the specifications of this tender and directions of the Engineer-in-Charge. |
| 137 | DISMANTLING OF ELECTRICAL FLP/WP FITTINGS:The scope of work includes dismantling of surface/channel/wall/steel structures mounted WP/FLP(Div-1 and Div-2) type fittings such as lighting fixtures, push button stations/motor control stations, junction boxes, welding sockets, lighting panels convenience outlets/ convenience outlets with built in transformer etc. of Weight of the unit upto 2 Kg. all complete without damage and returning them to CPCL stores or any other place or site within the premises, including dismantling of any supports, poles,frames or any other structures related to the fittings, as per the specifications of this tender and directions of Engineer-in-Charge. |
