Mla Ads 2018 - 19 - Renovation Works At Sarovaram Bio Park In Kozhikode Corporation Setting Up Of Open Gym
Tender Value
15.69 Lakhs
Estimated cost
Bid Submission
01 Sep 2021
0 days left
EMD
39300
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
SAROVARAM - MINI BYE PASS KOZHIKODE → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Mla Ads 2018 - 19 - Renovation Works At Sarovaram Bio Park In Kozhikode Corporation Setting Up Of Open Gym
BOQ
| Sl. No. | Item Description |
| 1 | Construction of open gym |
| 2 | 2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil |
| 3 | 50.6.3.2 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in: CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete |
| 4 | 13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 5 | 4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) |
| 6 | 5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete |
| 7 | 4.2.3 : Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 8 | 13.50.1 : Applying priming coat:With ready mixed pink or Grey primer of approved and manufacture on wood work (hard and soft wood) |
| 9 | 14.46 : Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 10 | 13.50.3 : Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron /steel works |
| 11 | 13.48.3 : Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Painting Steel work with Deluxe Multi Surface Paint to give an even shade.Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture |
| 12 | 13.56.2 : Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work.150 mm diameter pipes |
| 13 | 4.1.5 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 14 | od199612/2020_2021 : Providing and laying granite floor tile of size 600*300 mm (10 mm thick) of 1st quality of approved make in all colours , shades over 12mm thick bed of cement mortar 1:3 and jointing with grey cement etc..complete. |
| 15 | od112813/2021_2022 : Bar Climber (single )- providing and fixing Bar climber (quality to be specified by the manufacturer) using 1st quality material with anti resistant powder coating. fixing work to be done by the presence of engineer in charge, all work completed. |
| 16 | od112882/2021_2022 : dual skir- providing and fixing Dual skir (quality to be specified by the manufacturer) using 1st quality material with anti resistant powder coating. fixing work to be done by the presence of engineer in charge, all work completed. |
| 17 | od112883/2021_2022 : Back and Hip Massager- providing and fixing Back and Hip Massager (quality to be specified by the manufacturer) using 1st quality material with anti resistant powder coating. fixing work to be done by the presence of engineer in charge, all work completed. |
| 18 | od112884/2021_2022 : Abdominal Board- providing and fixing Abdominal board (quality to be specified by the manufacturer) using 1st quality material with anti resistant powder coating. fixing work to be done by the presence of engineer in charge, all work completed. |
| 19 | od112885/2021_2022 : Pull Ups - providing and fixing Pull Ups (quality to be specified by the manufacturer) using 1st quality material with anti resistant powder coating. fixing work to be done by the presence of engineer in charge, all work completed. |
| 20 | od112886/2021_2022 : Air Walker- providing and fixing Air Walker (quality to be specified by the manufacturer) using 1st quality material with anti resistant powder coating. fixing work to be done by the presence of engineer in charge, all work completed. |
| 21 | od112887/2021_2022 : hand Rower- providing and fixing Hand Rower (quality to be specified by the manufacturer) using 1st quality material with anti resistant powder coating. fixing work to be done by the presence of engineer in charge, all work completed. |
| 22 | od112888/2021_2022 : Hip Shaper- providing and fixing Hip Shaper (quality to be specified by the manufacturer) using 1st quality material with anti resistant powder coating. fixing work to be done by the presence of engineer in charge, all work completed. |
| 23 | od112889/2021_2022 : Hand Puller- providing and fixing Hand puller (quality to be specified by the manufacturer) using 1st quality material with anti resistant powder coating. fixing work to be done by the presence of engineer in charge, all work completed. |
| 24 | od112891/2021_2022 : Lat pull Down Dual- providing and fixing Lat pull Down Dual (quality to be specified by the manufacturer) using 1st quality material with anti resistant powder coating. fixing work to be done by the presence of engineer in charge, all work completed. |
| 25 | od112914/2021_2022 : Chest Press Dual - providing and fixing Chest Press dual (quality to be specified by the manufacturer) using 1st quality material with anti resistant powder coating. fixing work to be done by the presence of engineer in charge, all work completed. |
AI Tender Summary
Tender Timeline
Aug 20, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedSep 01, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 02, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender