|2||Providing following type of Modular Type Accessories.
One No. SP 6 Amp switch.|
|4||Electronic hum free four or more steps EME Fan regulator..|
|5||16 Amp. SP one way switch.|
|6||6/16 Amp. Universal socket.|
|7||6 Amp./16 Amp Two Way switch.|
|8||6A/10A/16A/20A/25A/32A Single Pole Modular MCB Switch.|
|9||6A to 32A Double Pole Modular MCB (Cat. III)|
|10||32 Amp. DP Switch with indicator.|
|11||Supplying UPVC Mini trunking (PVC Casing-n-Capping) having double-locking arrangement with grooves, trunking of size not below 12.5 mm in height as per IS of following size.
|13||Supplying Flexible PVC insulated multistrand multicore 1.1 kv grade ISI marked copper wires of following size.
1.50 Sq.mm 3 core round PVC sheathed.|
|14||2.50 Sq.mm 3 core round PVC sheathed.|
|15||4.00 Sq.mm 3 core round PVC sheathed.|
|16||4.00 Sq.mm 4 core round PVC sheathed.|
|17||Providing following Shockproof tissino type accessories.
One no Single pole 6A Switch / Bell push.|
|18||One no 3/5 pin 6A socket.|
|19||One no Single pole 16A Switch & One no 6/16A Universal Socket combined with indicator & fuse|
|20||Bakelite ceiling rose.|
|21||Bakelite lamp holder.|
|22||Tissino type 10A / 16A Kitkat fuse.|
|23||Electronic Hum Free EME Socket Type Steps Fan Regulator.|
|24||Providing ISI marked 3 pin plug top.
for 5/6 A., 240V.|
|25||for 15/16 A., 240V.|
|26||Decorative call bell Ting – tong box type 250 volts complete.|
|27||Supplying approved make HFHC Electronic ballast having operation voltage range 120V – 300V at 0.95 power factor for
One No. 20 / 40 watt tube light.|
|28||Providing Approved make Double Pole Plastic Switch and fuse 250V., 30A confirming to IS.|
|29||Providing Approved make Triple Pole Metal Clad Switch Fuse Unit 415/500V. with HRC fuse of suitable load and neutral link confirming to I.S.S.
|30||100 A / 125 A.|
|31||Approved make Three pole moulded case circuit breaker having breaking capacity / strength ICU of 35K.A. at 415V. having normal current rating up to 125A. with Fixed thermal & magnetic release suitable to work on A.C. supply 50c/s.
ICS = 100% of ICU only Cat. III.|
|32||Supplying KITKAT pattern porcelain cutout with base of following current capacity.
|34||Miniature circuit breaker single pole 6A to 32A. suitable to operate on 240V. A.C. system and having breaking capacity 10 KA. Confirming to IS 8828 / 1996 with ISI Mark.|
|35||Providing 240V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828.
6 to 32 Amp..|
|37||Providing 415V MCD Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS : 8828.
6 to 32 Amp.|
|40||Supplying 20 Amp. 10KA. ‘C Curve’ single pole MCB with 20 Amp. plug socket, company fabricated powder coated sheet enclosure.
Metal Clad Socket with Metal clad top.|
|41||Plastic enclosure fitted with DIN rail suitable for incorporating One / Two nos. MCB.|
|42||Plastic enclosure fitted with DIN rail suitable for incorporating Three / Four nos. MCB.|
|43||Providing Sheet Steel powder coated MCB distribution board – flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 with out MCB.
Single phase 8 way SS Double door.|
|44||Single phase 12 way SS Double door.|
|45||Three phase 4 way SS Double door for single phase outgoing horizontal box.|
|46||Providing Annealed bare Copper wire 8 to 16 S.W.G.|
|47||Supplying XLPE (IS: 7098) (I)-88 ISI unarmoured copper cable 1.1 KV grade of following size.
4 core 2.5 Sq.mm.|
|48||Supplying approved make low noise decorative exhaust fan having size 200mm with 1350 RPM with square frame ABS body with inbuilt lowers & square frame.|
|49||Rewinding of Any fan by using super enameled copper wire and over hauling and putting in working order with original speed with guarantee for one year including credit of D.M. retained by Agency.|
|50||Condenser for ceiling fan / Exhaust Fan / Pedestal Fan / Table Fan / Cabin Fan.|
|51||Providing & erecting open well type horizontal Monoblock pumpset with stainless steel body having following specification.
1 H.P. single phase open well motor pump set suitable for 185 LPM discharge @ 25 mtr. Head, suitable for 32 mm dia. Delivery pipe with control panel. (Cat-II)|
|52||Supplying of single phase submersible pump set suitable for 100 mm size of more dia bore well having motor capacity and discharged as under with necessary panel box.
Motor rating 1 HP (12 stage) pump having capacity of 50 LPM at 43 to 45 mtr. head suitable for 32mm dia. delivery pipe. (Cat-II)|
|53||Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembledon single MCPCB,with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistancewith diffuser and/or Polycarbonate optics with
120 to 300 V,Power Factor more than 0.9, THD < 10 %,
CCT4000 K to 6500K, Uniformity ratio >0.7,
Luminaire efficiency> 85 lumens/watt ,
LED driver efficiency > 85 %
CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED used for luminaire. (Each fitting required LM-79 & LM-80 Certificates).
(A) Tube Light with integral/ non-integral driver.
16-18 Watts, Surge - 4KV, IP-20, 4 feet. (Cat-III)|
|54||Supplying and erecting LED street light/ Flood light fitting with high power white LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more the 130 Im/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coasted and Polycarbonate optics/ lenses with company mark/ name engraved or embossed
120 to 300V, Power Factor more than 0.95, THD < 10% CCT 5000 K to 5700k,Uniformity ratio > 0.45, luminaire efficacy>85 Lumens/ watt. LED driver efficiency > 85%. CREE/ OSRAM/ PHILIPS Lumileds / NICHIA/ SEOUL/ Bridge Lux (U.S.A.) make LED used for luminaire.
(Each fittings required LM-79 & LM-8- certificates)
(B) Flood Light (IP-65), Surge-4KV.
Above 100 to 120watts. (Cat-III)|
|55||Supply of Adaptor (Anchor / Jainex make)|
|56||Supply of Plug top 2 pin6A (Anchor / Jainex make)|
|57||Supply of Male female 6A(Anchor / Jainex make)|
|58||Supply of Hang cord switch bed switch(Anchor / Jainex make)|
|59||Supply of Hang cord switch bellpush 1-way (Anchor / Jainex make)|
|60||Supply of Tube holder rotor holder (Anchor / Jainex make|
|61||Supply of Starter for tube light 40W(Anchor / Jainex make)|
|62||Supply of Gang box surface 2 way ( Anchor / Jainex make)|
|63||Supply of Gang box surface 3 way ( (Anchor / Jainex make)|
|64||Supply of Gang box surface 2 way domestic (Anchor / Jainex make)|
|65||Supply of Bul bul bird chime bell Electronic (Anchor/ Jainex make)|
|66||Supply of Dyna Flexi cord delta 16A, 3pin 4mtr. (Anchor/ Jainex make)|
|67||Supply of Hack saw blade/HSS Mirand or Bipico|
|68||Supply of 9W LED lamp BC/ES27.|
|69||Supply of Masonry drill bit 5mm (joran make).|
|70||Supply of Masonry drill bit 5.5mm (joran make).|
|71||Supply of PVCsquare box Nakoda.|
|72||Supply of Screw Yamaha 25mm X 8 mm|
|73||Supply of Screw Yamaha 35mm X 8 mm|
|74||Supply of Screw Yamaha 45mm X 8 mm|
|75||Supply of Screw Yamaha 60mm X 8 mm|
|76||Supply of Sunwood board 10” X 8” pesto plast.|
|77||Supply of Sunwood board 10” X 12” pesto plast.|
|78||Supply of Tester Taparia.|
|79||Supply of 16/0.20mm twin core flexible copper wire white std. make.|
|80||Supply of Aluminium strip for sadding of cable size 1” breadth. Std. make.|
|81||Supply of Grip 25 X 8mm (Marsal)|
|82||Supply of Cutter ( knife ) big size. (Taparia)|
|83||Supply of PVC insulated tap ( steel grip ) ISI.|
|84||Supply of Aluminium service wire weather proof 2 X 2.5mm2 (Polycab make).|
|85||Supply of Aluminium service wire weather proof 2 X 6mm2 (Polycab make).|
|86||Supply of plier 8” Tap aria|
|87||Supply of screw Driver12” Tap aria.|
|88||Supply of screw Driver set Tap aria.|
|89||Supply of screw spanner 19mm Tap aria.|
|90||Supply of HSS drill bits set std. make.|
|91||Supply of Pendent holder 5 knife ( Anchor ).|
|92||Supply of Dry pencil cell 1.5 V.D.C. Novino gold.|
|93||Supply of Dry big cell 1.5 V. V.D.C.Novino gold.|
|94||Supply of Flexi cords Delta 3 pin 4 mtr. ( Anchor ).|
|95||Supply of Flexi cords Delta 2 pin 8 mtr. ( Anchor ).|
|96||Supply of Metal clad plugs 20A/230V 3 pole ( Anchor )|
|97||Supply of Metal clad socket with cap & chain ratings 20A/230V/3pole (Anchor)|
|98||Supply of Flexible PVC pipe for panel, std make size of
|99||(b) 1” dia.|
|100||Supply of Casing caping box type patti Nokoda / Preso plast size of
( a )11/2” Width|
|101||Supply of Aluminium service wire weather proof 2 X 10mm2 std. make.|
|102||Supply of Water proof ply wood kit ply make 19mm. 6’ x 4’.|
|103||Supply of Water proof ply wood kit ply make 12mm. 6’ x 4’.|
|104||Supply of S. S. pipe down rod for ceiling fan length 21/2" std, make.|
|105||Supply of S.S. pipe down rod for ceiling fan length 4’std, make.|
|106||Supply of S.S. pipe down rod for ceiling fan length 6’std, make.|
|107||Supply of Electrical Hammer Drill Machine Black & Decker std. make size 15mm|
|108||Supply of Front plates clipped with base plate Anchor Roma / Toyama make
(a) 2 Module.|
|115||Supply of FR PVC insulated ISI marked standared copper conductor wire polycab / anchor make of following size.
(a) 1.5 Sq. mm.|
|116||(b) 2.5 Sq. mm.|
|117||(c) 4 Sq. mm.|
|118||(d) 6 Sq. mm.|
|119||(e) 10 Sq. mm.|
|120||(f) 16 Sq. mm.|
|121||Supply of HRC fuse (Crompton greave)
|124||Supply of spike guard (Anchor)|
|125||Supply of Anchor Roma surface boxes
(a) 2 Module.|
|126||(b) 3 Module.|
|127||(c) 4 Module.|
|128||(d) 6 Module.|
|129||(e) 8 Module.|
|130||(f) 12 Module.|
|132||Supply of Cordless Bell of approved make.|
|133||Supply of Cable tai 150/200/300 No|
|134||Supply of LED driver 15W of approved make & design.|
|135||Supply of LED Lamp 3W BC/ES27/ES14 (Cat-III)|
|136||Supply of Bosch GBH 2-22 RE SDS plus, Rotary Hammer drill, 620 watts, 22mm.|
|137||Supply of LED Street light 60W (Cat-III)|
|138||Supply of LED tube Al. extrusion retrofit 18W Surya SLETL – DS18P or equi. make (Cat-III)|