Renovation Of Iei To Nursing Home And Special Ward At Gb Pant Hospital Port Blair.
Tender Value
17.67 Lakhs
Estimated cost
Bid Submission
03 Sep 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Port Blair → Andaman And Nicobar Islands
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation Of Iei To Nursing Home And Special Ward At Gb Pant Hospital Port Blair.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 01-Sep-2021 | Corrigendum for extension | Date | 03-Sep-2021 |
BOQ
| Sl. No. | Item Description |
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. |
| 2 | Group C |
| 3 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 4 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. |
| 5 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 6 | 4 X 6 sq. mm + 2 X 6 sq. mm earth wire |
| 7 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 8 | 5/6 A switch |
| 9 | 15/16 A switch |
| 10 | 3 pin 5/6 A socket outlet |
| 11 | 6 pin 15/16 A socket outlet |
| 12 | Supplying and fixingtwo module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 13 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. |
| 14 | 1 or 2 Module (75 mmX75 mm) |
| 15 | 3 Module (100 mmX75 mm) |
| 16 | 4 Module (125 mmX75 mm) |
| 17 | 6 Module (200 mmX75 mm) |
| 18 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 19 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 20 | Supplying and fixing 3pin, 5A ceiling rose on the existing junctionbox/woodenblockincludingconnectionsetc.as required. |
| 21 | Installation ,Testing,Commissioningofwallbracket/ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lampsperfitting,completewithallaccessoriesincluding connections etc. as required. |
| 22 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. |
| 23 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 24 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. |
| 25 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). |
| 26 | SupplyingandfixingPVC batten/angle holderincluding connections etc. as required. |
| 27 | Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet,with 2poleandearth,metalenclosedplugtop alongwith 20 A \"C\" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. |
| 28 | Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. |
| 29 | 400 A TP&N |
| 30 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. |
| 31 | 100 A, 16 KA,TPMCCB |
| 32 | 200 A, 25 KA,TPMCCB |
| 33 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 34 | 4 way (4 + 12), Double door |
| 35 | 6 way (4 + 18), Double door |
| 36 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) |
| 37 | 4 way (4 + 12), Double door |
| 38 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of followingpolesintheexistingMCBDBcompletewith connections, testing and commissioning etc. as required. |
| 39 | Single pole |
| 40 | Triple pole |
| 41 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 42 | 40 A |
| 43 | 63 A |
| 44 | EarthingwithG.I.earthpipe 4.5metrelong,40mmdia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 45 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 46 | Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 47 | Providing and laying earth connection fromearth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required. |
| 48 | Supplying of 5 star Energy saving ceiling fans BLDC 26W to 32W 1200mm sweep,White colour. Make Usha, Model (Energia 32)/ Havells (Efficiencia Neo)/orient(Atomiser) |
| 49 | Supplying of LED lamp with base B22 . |
| 50 | 0.5W Colour |
| 51 | 9W LED lamp |
| 52 | Supplying of industrial LED battens. Make Philips Model TMC 501 P 1xT-LED 22W P3241 |
| 53 | Supplying of LED tube of 1200mm long, 20W T8 with 2100lm. Make Philips. |
| 54 | Supplying and fixing of LED Bulk head of 9W/600 lumen wth IP66 Protection. Make Philips, Type : WT202W LED6S CW PSU S2 PC |
| 55 | Supplying and fixing ofinstant electric Water heater/geyser of 3 Litre capacity and power rating of 3KW. Make Havells/Bajaj |
| 56 | Supplying of decorative wall light with LED lamp. Make Philips, Model : Grace |
| 57 | Supplying of Mirror LED wall light of 1x11W, 6500K & 800 lm .Make : Philips, Model : 31167 |
| 58 | Supplying of recess mounted LED square fitting of 12W & 6500K. Make: Havells, Model: Octane |
| 59 | Supplying and fixing of wall fan of 400 mm sweep |
| 60 | Supplying and fixing of Offload Changeover, 400Amp, 415V switch with side handle. Make Havell, Cat No. IHCFFE0400 |
AI Tender Summary
Tender Timeline
Sep 01, 2021
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 03, 2021
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedSep 03, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 03, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender