Constructions Of Four Lane Yet Ayodhya Sultanpur Nh-330 To Airport. Constructions
Tender Value
12.70 Crore
Estimated cost
Bid Submission
26 Aug 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
2354
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
office of the se.ayo.ambe.circle.pwd.ayodhya → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Constructions Of Four Lane Yet Ayodhya Sultanpur Nh-330 To Airport. Constructions
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 24-Aug-2021 | Date | Date | 26-Aug-2021 |
BOQ
| Sl. No. | Item Description |
| 1 | Construction of embankment with approved materials obtained from Borrowpits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meetrequirement of table 300-2. |
| 2 | Construction of Granular Sub-Base by providing Closegraded material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with Vibratory roller to achieve the desired density, complete as per technical clause 401 |
| 3 | Providing, laying, spreading and compacting graded stone aggregate in layers Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. |
| 4 | Providing, laying, spreading and compacting graded stone aggregate in layers Stablized Wet Mix Macadam specification with 1% cement +3.5% bitumen emulsion including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. |
| 5 | Providing and applying tack coat with bitumen (VG 10) usingpressure distributor at the rate of0.30kg per sqm on the prepared bituminous surface cleaned with mechanical broom. |
| 6 | Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder bitumen VG-30 @ 4.5 per centby weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. |
| 7 | Providing and laying bituminous concrete withhigher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binderbitumen VG-30 @ 5.4per centof mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects |
| 8 | Providing and Laying of 80mm thick rubber moulded reflective Zig Zag Shape inter locking tiles of precost compressive strength in Gray and Red Colour over prepared base of GSB using local sand for levelling and joing filling i/c all cost of labour T&P etc. required for proper completion of work. |
| 9 | Earth-work Excavation in trenches for foundations pipes, cable etc,(Loan clay or sand) including lift upto 1.5m lead upto 50m. And dressing of sides and rammingof bottom and disposal of surplus excavated earth as directed by the Engineer i/c within ahead of 30m. |
| 10 | PCC in 1:3:6 with cement coarse sand and 40mm size stone ballast including supply of all materials , labour T & P etc and curing complete also including cost of formwork in foundation and floor as per SI no 280 |
| 11 | Painting or Vanishing on iron works in small areas or new wood work with one coat of ready mixed priming paint & 2 coat of approved superior ready mixed paint of clear syuthetic varnish including supply of all materials, labour and T & P etc. required for proper completion of work. Paint to be used should confirm to the I.S.I. No. 103-1950 (SI.No 641&642) |
| 12 | Construction of cement concrete kerb with top and bottom width 115 and 165mm respectively, 250mm high in M20 grade PCC on M-10 grade foundation 150mm thick, foundation having 50mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408. |
| 13 | R.C.C. 1:2:4 with cement , coarse sand and 20mm stone grit as perS.I.No 282 |
| 14 | Class-150 brick work in 1:3 Cement and Coarse sand of mortar infoundation and plinth including supply of all materials, labour and tools and plants,etc ,required for proper completion of the work. |
| 15 | Class-150 brick work in 1:3 Cement and Coarse sand of mortar in Super Structure including supply of all materials, labour and tools and plants,etc ,required for proper completion of the work |
| 16 | R.C.C. M25 grade in Slab and bed block in Super structure as per technical drawing and specification. (Deck Slab) |
| 17 | Supplying, fitting and placing un-coated Mild steel reinforcement complete as per drawing and technical specification |
| 18 | Supply and fixing of 10cm internal Dia Ac Down pipes required for proper completion of work in weep holes. |
| 19 | Struck Pointing on brick work with cement mortar 1:2 (1Cement :2 sand) |
| 20 | Back filling behind abutment, wing wall and retaining wall complete as per drawing and technical specification clause 1204.3.8 of MORD specification. |
AI Tender Summary
Tender Timeline
Aug 24, 2021
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 26, 2021
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedAug 26, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 26, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
Completed