Public Health Engineering Department-PHED has published Commissioning Of Source Under South Dn Barmer- 1 Providing & Laying Isi Marked Gi Pipe ·A .. Class As Per Is: 1239 For Casing Pipe For Submersible Cable External Work 40 Mm Dia Complete In All Respect 2 Supply & Installation Of 3 Phase Isi Marked Subm. Submission Date for this Tender is 27-08-2021. Coats and Jackets Tenders in Barmer Rajasthan. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 25-Aug-2021 | Tender Documents | Technical Bid | 27-08-2021 |
Sl. No. | Item Description |
1 | Providing & laying ISi marked GI Pipe "·A .. class as per IS: 1239 for casing pipe for submersible cable external work 40 mm dia complete in all respect |
2 | Supply & Installation of 3 phase ISi marked submersible motor pump set of five star rating by BEE and as per JS: 8034-2011 (pump) and IS 9283-2013 (motor) or amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/DCB. The job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect. Up to 5.5 KW (7.5 HP) & head up to 120 mtr. |
3 | Up to 5.5 KW (7.5 HP) & head above 120 mtr. |
4 | 7.5 KW (1O HP) & head up to 120 mtr. |
5 | 7.5 KW (1O HP) & head above 120 mtr. |
6 | 9.3 KW ( 12.5 HP) & head up to 120 mtr. |
7 | 9.3 KW (12.5 HP) & head above 120 mtr. |
8 | 11 KW (15 HP) & head up to 120 mtr. |
9 | 11 KW (IS HP) & head above 120 mtr. |
10 | 13 KW (17.5 HP) & head up to 120 rntr. |
11 | 13 KW (17.5 HP) & head above 120 mtr. |
12 | 15 KW (20 HP) and above, head up to 120 mtr. |
13 | 15 KW (20 HP) and above, head above 120 mtr. |
14 | Supply and Fixing of electric control feeder panel comprising of suitable rating MCCB , fully automatic star-delta starter, over load relay, ampere meter with CTs, volt meter, phase preventor, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. The panel should have space for energy meter (supplied by DISCOM). All these equipments shall be housed by panel box made out from 18 guage M.S. Sheet with powder coating. Panel should be of minimum size 900 x 600 x 450 mm with Stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg"s length 18" and double door including in built locking system. The legs should be embedded in M-15 cement concrete plat form.The size of CC plateform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. The panel should have opening of suitable size in front of space for energy meter with glass for meter reading. The operation of panel should be suitable for on 440Volt AC Supply. Above 5 HP and up to 10 HP |
15 | Above 10 HP and up to 15 HP |
16 | Above 15 HP |
17 | Supply & Fixing of ISi marked three core PVC flat submersible cable as per IS 694: 1990 or amended up to date and conductor as per class 5 of IS 8 130: 1980 includ ing making connection etc. 3 core 4.0 mm2 |
18 | 3 core 6.0 mm2 |
19 | 3 core 10.0 mm2 |
20 | 3 core 16.0 mm2 |
21 | S&F XLPE insulated/PVC sheathed cable of 1.1 KV grade with aluminium conductor armoured of IS:7098-I/1554-1 approved make in ground as per IS:1225 including excavation of 30cmx 75cm size trench 25 cm thick under layer of sand, second class bricks covering, refilling earth, compaction ofearth, making necessary connection, testing etc. as required of size. 10 Sqmm 4 core |
22 | 16 Sqmm 4 core |
23 | 25 Sqmm 4 core |
24 | 35 Sqmm 4 core |
25 | S&F M S clamp set of 50x6mm flat iron with nuts and bolts etc for holding the riser pipe assembly of submersible pump set. |
26 | Plate earthing as per IS:3043 with G.I. earth plate of size 600mm x 600 mmx6.0mm by embodying in 3 to 4 mtr. below the ground level with 20mm dia. GI "B" class watering pipe including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. cover, C.I. frame of size 300mm x300mm complete wih alternate layers of salt and coke/charcoal, testing of earth resistance as required. |
27 | Supply & Fixing tube well cover of MS sheet 8mm thick at top & 5mm thick I OOmm wide shroud around the edge so as to form a cap on the top end of casing pipe with GI Nipple 45cm long & two GI flanges at both end in 80mm sizes passing through a hole in the centre of MS sheet. A 25mm socket with end plug shall also be welded over top plate (as per drawillg enclosed). A GI nipple having outside thread of size 1/2" (for installation pressure gauge) shall tie provided & welded with 80mm GI nipple near top plate nipple shall be provided with end plug. 200mm |
28 | 250mm |
29 | Providing & Lowering in tubewell ISl marked GI Pipe "B" class as per IS: 1239 or amended up to date threaded and double flanged (welded) on both ends and two number 25x3mm flat welded on both ends between pipe & flange, rubber washer & nut bolts etc. complete in all respect. 50 mm dia |
30 | 65mm dia |
31 | 80mm dia |
32 | Providing & Lowering in tubewell lSI marked HOPE pipe as per IS 4984: 1995 or amended upto date in PE 80 grade and class PN 10 of following dia. including HOPE/GI fittings and PVC rope confirming to IS 5175:1992 or amended upto date, along with clamping of submersible cable etc. complete in all respect. 50 mm dia |
33 | 63 mm dia |
34 | 75 mm dia |
35 | 90 mm dia |
36 | Providing, installing, testing and commissioning of double flanged bulk flow meter with removable mechanism, of class B conforming to ISO 406411 or amended upto date of approved make including cost of all material and labour as per specifications with GI Box (sheet 16 SWG) suitable with locking arrangement of following dia. 50mm dia |
37 | 65mm dia |
38 | 80mm dia |
39 | Providing & Fixing pump safety cage as per specifications or as directed by engineer in charge |
40 | Providing & Fixing of double flanged, Cl body, ISi marked NR V of approved make of following sizes 65mm dia |
41 | 80mm dia |
42 | Supplying & Installing I 00 mm diameter sealed diaphragm bourdon type pressure gauge of range 0 to I 0 kg. including all jointing material as per specification and safety cover. |
43 | Structural steel work welded in built up sections,trusses and framed work exclusively for open wells including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer all complete above plinth level upto 4.5Mtr. height in R.S. Joints flats, tees, angles and channels. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail