Supply And Installation Of Equipment For Department Of Physics , Physics , Set Up To Determine G And Velocity For A Freely Falling Body Using Digital Timing Technique , Set Up To Determine The Valueof G Using Bar Pendulum , Set Up To Compare Capacita
Tender Overview
Project Description
Supply And Installation Of Equipment For Department Of Physics , Physics , Set Up To Determine G And Velocity For A Freely Falling Body Using Digital Timing Technique , Set Up To Determine The Valueof G Using Bar Pendulum , Set Up To Compare Capacitances Using De’Sauty’S Bridge , Set Up To Verify The Superposition, And Maximum Power Transfer Theorems , Set Up To Study Response Curve Of A Series Lcr Circuit And Determine Its ( A ) Resonant Frequency, ( B ) Impedance At Resonance, ( C ) Quality Factor Q, And ( D ) Band Width , Set Up To Study The Response Curve Of A Parallel Lcr Circuit And Determine Its ( A ) Anti-Resonant Frequency And ( B ) Quality Factor Q , Set Up To Determine Stefan’S Constant Using Thermocouple , Set Up To Calibrate A Thermocouple To Measure Temperature In A Specified Range Using ( I ) Null Method, ( Ii ) Direct Measurement Using Op-Amp Difference Amplifier And To Determine Neutral Temperature , Set Up To Determine The Excitation Potential Of Mercury / Argon By Franck-Hertz Experiment , Set Up To Study Photo-Electric Effect: Photo Current Versus Intensity And Wavelength Of Light; Maximum Energy Of Photo-Electrons Versus Frequency Of Light , Set Up To Determine The Absorption Lines In The Rotational Spectrum Of Iodine Vapour , Set Up To Study Of V-I & Power Curves Of Solar Cells, And Find Maximum Power Point & Efficiency. , Set Up To Study The Characteristics Of A Bipolar Junction Transistor In Ce Configuration , Set Up To Investigate The Use Of An Op-Amp As An Integrator / Differentiator , Set Up To Measure The Dielectric Constant Of A Dielectric Materials With Variation Of Frequency , Set Up To Measure The Resistivity Of A Semiconductor ( Ge ) With Temperature By Four-Probe Method ( Room Temperature To 150 0C ) And To Determine Its Band Gap , Set Up To Determine The Hall Coefficient Of A Semiconductor Sample. , Set Up To Analyze Elliptically Polarized Light By Using A Babinet’S Compensator , Set Up To Determine The Wavelength And Velocity Of Ultrasonic Waves In A Liquid ( Kerosene Oil, Xylene, Etc. ) By Studying The Diffraction Through Ultrasonic Grating , Set Up To Determine The Refractive Index Of ( 1 ) Glass And ( 2 ) A Liquid By Total Internal Reflection Using A Gaussian Eyepiece , Set Up To Verify The Law Of Malus For Plane Polarized Light , Cathode Ray Oscilloscope ( 30 Mhz Dual Trace ) , Travelling Microscope , Function Generator , All In One Desktop Computer 10Th Gen, Intel Core I3-1005G1, 1.1Ghz 8Gb Ram, 512 Gb Ssd, 23.8 Inch Fhd Display….. Model:24-Dp0816in , All In One Desktop Computer Hp Omen Core I5 10Th Gen ( 8Gb / 512Gbssd…. , Equilateral Glass Prism For Spectrometer , Servo Stabiliser -10Kva Model:6346 , Servo Stabiliser - 5Kva Model: 6344 , Scanner Cum Laser Printer , Set Up To Determine The Band Gap By Measuring The Resistance Of A Thermistor At Different Temperature , Spectrometer-Dia:7 Inch; Vernier Constant:20Sec , Set Up To Study The Pe Hysteresis Loop Of A Ferroelectric Crystal , To Study The I-V Characteristics Of Zener Diode And Its Use As Voltage Regulator , Study Of V-I And Power Curves Of Solar Cells And Find Maximum Power Point And Efficiency , To Determine Plank’S Constant Using Leds Of At Least 4 Different Colour , Set Up To Study The Complete I-V Characteristics Of A Tunnel Diode , Set Up To Study Half Adder, Full Adder And Fourbit Binary Adder , Set Up To Study Half Subtractor , Full Subtractor, Adder-Subtractor Using Full Adder Ic , To Determine Self-Inductance Of A Coil By Anderson’S Bridge , To Study The Motion Of Spring And Calculate ( A ) Spring Constant, ( B ) G And ( C ) Modulus Of Rigidity , To Determine The Elastic Constants Of A Wire By Searle’S Method , Ac Milivoltmeter , Regulated Dc Power Supply , Regulated Dc Power Supply , Ballistic Galvanometer , Dead Beat Galvanometer , Digital Weighing Machine , Portable Type Pointer Galvanometer
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 21-Aug-2021 | Corrigendum | Technical Bid | 28-Aug-2021 |
| 2 | 28-Aug-2021 | Date | Date | 31-Aug-2021 |
BOQ
| Sl. No. | Item Description |
| 1 | PHYSICS |
| 2 | Set up to determine g and velocity for a freely falling body using Digital Timing Technique |
| 3 | Set up to determine the valueof g using Bar pendulum |
| 4 | Set up to compare capacitances using De’Sauty’s bridge |
| 5 | Set up to verify the Superposition, and Maximum power transfer theorems |
| 6 | Set up to study response curve of a Series LCR circuit and determine its (a) Resonant frequency,(b) Impedance at resonance, (c) Quality factor Q, and (d) Band width |
| 7 | Set up to study the response curve of a parallel LCR circuit and determine its (a) Anti-resonant frequency and (b) Quality factor Q |
| 8 | Set up to determine Stefan’s constant using thermocouple |
| 9 | Set up to calibrate a thermocouple to measure temperature in a specified Range using (i) Null Method, (ii) Direct measurement using Op-Amp difference amplifier and to determine Neutral Temperature |
| 10 | Set up to determine the excitation potential of mercury/Argon by Franck-Hertz experiment |
| 11 | Set up to study Photo-electric effect: photo current versus intensity and wavelength of light; maximum energy of photo-electrons versus frequency of light |
| 12 | Set up to determine the absorption lines in the rotational spectrum of Iodine vapour |
| 13 | Set up to study of V-I & power curves of solar cells, and find maximum power point & efficiency. |
| 14 | Set up to study the characteristics of a Bipolar Junction Transistor in CE configuration |
| 15 | Set up to investigate the use of an op-amp as an Integrator / Differentiator |
| 16 | Set up to measure the Dielectric Constant of a dielectric Materials with variation of frequency |
| 17 | Set up to measure the resistivity of a semiconductor (Ge) with temperature by four-probe method (room temperature to 150 0C) and to determine its band gap |
| 18 | Set up to determine the Hall coefficient of a semiconductor sample. |
| 19 | Set up to analyze elliptically polarized Light by using a Babinet’s compensator |
| 20 | Set up to determine the wavelength and velocity of ultrasonic waves in a liquid (Kerosene Oil, Xylene, etc.) by studying the diffraction through ultrasonic grating |
| 21 | Set up to determine the refractive Index of (1) glass and (2) a liquid by total internal reflection using a Gaussian eyepiece |
| 22 | Set up to verify the law of Malus for plane polarized light |
| 23 | Cathode Ray Oscilloscope (30 MHz Dual Trace) |
| 24 | Travelling Microscope |
| 25 | Function Generator |
| 26 | All in one Desktop Computer10th Gen, Intel Core i3-1005G1,1.1GHz8GB RAM,512 GB SSD,23.8 inch FHD Display…..Model:24-dp0816in |
| 27 | All in one Desktop ComputerHP Omen Core i5 10th Gen(8GB/512GBSSD…. |
| 28 | Equilateral glass Prism for spectrometer |
| 29 | Servo Stabiliser -10KVA Model:6346 |
| 30 | Servo Stabiliser - 5KVA Model: 6344 |
| 31 | Scanner cum Laser Printer |
| 32 | Set up to determine the band gap by measuring the resistance of a thermistor at different temperature |
| 33 | Spectrometer-Dia:7 inch; Vernier Constant:20Sec |
| 34 | Set up to study the PE hysteresis loop of a ferroelectric crystal |
| 35 | To study the I-V characteristics of Zener Diode and its use as voltage regulator |
| 36 | Study of V-I and power curves of solar cells and find maximum power point and efficiency |
| 37 | To determine Plank’s constant using LEDs of at least 4 different colour |
| 38 | Set up to study the complete I-V characteristics of a Tunnel Diode |
| 39 | Set up to study Half Adder, Full Adder and fourbit Binary Adder |
| 40 | Set up to study Half Subtractor , Full Subtractor, Adder-Subtractor using full adder IC |
| 41 | To determine self-inductance of a coil by Anderson’s bridge |
| 42 | To study the Motion of Spring and calculate (a) Spring constant, (b) g and (c)Modulus of rigidity |
| 43 | To determine the elastic Constants of a wire by Searle’s method |
| 44 | AC Milivoltmeter |
| 45 | Regulated DC power supply |
| 46 | Regulated DC power supply |
| 47 | Ballistic Galvanometer |
| 48 | Dead Beat Galvanometer |
| 49 | Digital Weighing Machine |
| 50 | Portable type pointer galvanometer |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedCorrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedCorrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
CompletedBid Opening Date
Technical bids will be opened and evaluated.
Completed