municipality has published Construction Of Smart Park At Birmitrapur Municipality . Submission Date for this Tender is 02-09-2021. Gardening Tenders in Birmitrapur Odisha. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
2 | Earthwork Excavation in hard soil or gravelly soil within 50 mtrs initial lead and 1.5 mtr initial lift including rough dressing and breaking clods to maximum 5 cum to 7 cm and laying in layer not exceeding 3 mtrs in depth including cost of all materials, labour, labour cess, royalties, conveyance, applicable taxes and T&P etc.complete in all respect as directed by Engineer-in-Charge. Ground levelling (3000.00,Cum) Kerb (54.000 ,Cum) Gazebo Pavilion Periphery (3.300,Cum) Yoga Pavilion Footing (27.000,Cum) Kids Equipment Foundation( 4.752,Cum) Open Gym Foundation ( 2.592,Cum) Dustbin Foundation ( 0.512,Cum) Post Top Lights ( 3.200,Cum) Electrical Panel ( 0.300,Cum) Guard Room Footing (4.800,Cum) Guard room plinth wall ( 0.720,Cum) Shrubs ( 32.000,Cum) |
3 | Filling foundation and plinth with excavated Earth |
4 | Disposal of excavated earth, slush, debrises etc within 5 km lead conplete |
5 | Providing and laying P.C.C(1:3:6) in foundation trench and below flooring using 40mm gradede crusher broken HG metal, including compaction, curing including cost of all materials and labours etc complete as per direction of Engineer-in-large Kerb (12.000,Cum) Gazebo(1.100,Cum) Gazebo Footing(2.700,Cum) Gazebo Pavilion Floor(3.200,Cum) Kids Equipment Foundation(0.792,Cum) Open Gym Foundation(0.792,Cum) Dustbin Foundation(0.128,Cum) Post Top Lights (0.800,Cum) Electrical Panel (0.050,Cum) Guard Room Footing(0.400,Cum) Gurad room plinth wall(0.330,Cum) Guard Room Flooring(0.900,Cum) Toilet block PCC(0.512,Cum) Below kota flooring at plaza and badminton court(16.500,Cum) |
6 | Providing and laying in position design mix M-20 grade cement concrete using cement content as per approved design mix, including poring, compaction but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. Kerb(32,Cum) Kids Equipment Foundation(4.752,Cum) Open Gym Foundation(4.752,Cum) Gazebo(8.1,Cum) Gazebo Footing(2.673,Cum) Post Top Lights(2.25,Cum) Electrical Panel(0.3,Cum) Guard Room Footing(1.2,Cum) Guard Room Footing Pedestal(1.296,Cum) Guard Room Footing Plinth Beam(0.57132,Cum) Guard Room Footing Lintel Beam(0.57132,Cum) Guard Room Footing roof Beam(0.57132,Cum) Guard Room Footing Slab(1.35,Cum) Dust bin base(0.216,Cum) Bench(1.836,Cum) |
7 | Providing strong, rigid, leveled, and plumbed centering and shuttering to required shape and size , for floors with wooden or steel centering materials with all necessary bracing and tiles and supports with leveling centering covered with bituminous paperwith provisions necessary holes and pockets for electrical conduits,pipes, P.H. pipes, for hooks or boxes, switch and board insert plates, clamps and extension bars etc., including dismantling the same after the required interval from the date of casting including cost of all materials, labour, conveyance, loading and unloading, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., complete as per the direction of the Engineer-in-charge. Kerb(320,Cum) Kids Equipment Foundation(31680,Cum) Open Gym Foundation(31680,Cum) Gurdroom footing(4.8,Sqm) Gazebo footing(21.6,Sqm) |
8 | Column & Beam Gazebo pedastal (23.76,Sqm) Guard room column (19.2,Sqm) Guard room plinth beam, lintel & roof beam(26892, Sqm) |
9 | Roof Slab |
10 | Supplying TMT steel reinforcement bars of grade FE 500of required diameters of approved quality including straightening, cutting to size, bending, and binding the reinforcement,lifting and placing in position as per design complete including cost of bars , binding wires 18 gauge, including cost of all materials, labour, conveyance, loading and unloading, taxes, royalties, sundries, tools and plants, etc. complete as per the direction of the Engineer-in-charge. (linear measurement will be taken and quantity will be calculated on standard weight for all heights) |
11 | Construction of granular sub-base by providing close graded granular sub-base Grading-III material as per table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H Specifications for Road & Bridge works (5th Revision). Pathway paver block(700,Cum) Paver Block at Gym area(70,Cum) Plaza(37,Cum) Badminton court(28.8,Cum) |
12 | Filling in foundation & plinth with sand watered and ramed etc complete. Pathway paver block (375,Cum) Sand filling in Kids Play area (30,Cum) Paver Block at Gym area (70,Cum) Gazebo floor(6.2,Cum) Guard room floor (1.875,Cum) |
13 | Providing and laying factory made Cement Concrete paver blocks of 60 mm thick and M-30 grade of concrete of required strength, thickness & size/shape, made by table vibratory method , to attain superior smooth finish using PU or equivalent moulds, laid in required Grey colour & pattern over 50mm thick compacted bed of coarse sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc.,including cost of all materials, labour, labour cess, royalties, conveyance, applicable taxes and T&P etc.complete in all respect as directed by Engineer-in-Charge & manufacturer’s specifications Pathway paver block |
14 | Providing, welding, bolting structural steel such as base plate, angle, channels, errecting, hoisting, fixing in position as per direction of engineer including required nuts & bolts Gazebo @ 2 qtl/sqm (plith area)(62,Qtl) Boundary Grill (3,Qtl) Gate @ 50 kg/sqm(8,Qtl) Sign board(0.6,Qtl) |
15 | Providing and applying 16 mm thick plaster to un even side of wall in cement mortar (1:6) on all types of surfaces using coarse clean sand including surface preparation, curing both the coats, roughening the first coat for making key for the next coat ,bends, pattas, grooves, drip moulds, etc. and all scaffolding, curing etc., including cost of all materials, labour, labour cess, royalties, conveyance, applicable taxes and T&P etc.complete in all respect as directed by Engineer-in-Charge. Guard room |
16 | Supplying & spreading of approved good quality cow dung manure well decomposed garbage free including loading, unloading and delivery at site with all leads and lifts including cost of all materials, labour, labour cess, royalties, conveyance, applicable taxes and T&P etc.complete in all respect as directed by Engineer-in-Charge. Grass(123.75,Cum) Trees(16.2,Cum) Shrubs(4.8,Cum) |
17 | Supply and planting of korean grass well grown disease free, carpet formed, 2” thickness including cost of all materials, labour, labour cess, royalties, conveyance, applicable taxes and T&P etc.complete in all respect as directed by Engineer-in-Charge. |
18 | Supply, stacking and plantingwell developed tree of average height 1.5m (+/- 10 cm) sapllings of approved mix of species including cost of all materials, labour, labour, digging pits, cess, royalties, conveyance, applicable taxes and T&P etc.complete in all respect as directed by Engineer-in-Charge. LARGERSTROEMIA INDICA |
19 | Samanea saman |
20 | Plumeria rubra |
21 | Delonix Regia |
22 | Jarcanda |
23 | Azadirachta indica |
24 | Shrubs & Hedges: Supply and planting well developed tree sapllings below 0.6 hight well branched in polybag 30x20cm of approved mix of species including cost of all materials, labour, labour cess, royalties, conveyance, applicable taxes and T&P etc.complete in all respectas directed by Engineer-in-Charge. LANTANA CAMARA (16 nos per sqm x 25 sqm) |
25 | DURANTA GOLDIANA(6 nos per sqm x 115 sqm) |
26 | Taberneamontana(6 nos per sqm x 55 sqm) |
27 | Hibiscus Rosa Sinensis (4 nos per sqm x 55 sqm) |
28 | Childrens play Equipment: Design and supply of childrens play equipments as per the approval and complete satisfaction of engineer in charge Sea saw (set of 2 pieces) |
29 | Single post swing |
30 | FRP plain swing |
31 | Open GYM Equipment: Design and supply ofGym Equipments, as per the approval and complete satisfaction of engineer in charge Tie Chai Double |
32 | Double Shoulder Press |
33 | Walker |
34 | Leg Extension |
35 | Legpress cum twister |
36 | Arm Bike |
37 | Supply, fixing and installation of FRP benches with backrest as per the approved drawing including cost of all materials, labour, labour cess, royalties, conveyance, applicable taxes and T&P etc.complete in all respect as directed by Engineer-in-Charge. |
38 | Supplying, fitting and fixing of approved brand PRE FABTOILETVentilation, Stainless steel wash basin, Stainless steel 304 side lining, Mild steel frame As per IS 4923, Galvanized steel body as per IS 277, Heat insulation , Zinc rich epoxy based primer, Epoxy based main coat, Polyurethane based final glossy coat, dual tone color, Loft type Overhead Water tank 200 Ltrs complete as per direction of engineer in charge including all pipes, fittings, fixtures, sanitary installations etc compete as per specification and direction of engineer in charge. |
39 | Supplying and installation of FRV biodigestor of DRDO technology of following capacity, 6mm wall thickness with cost of all materials required for the work with all labour etc complete as per the direction of the E.I.C. Ratio of Bio-media & Bio- Inoculums Culture& Ecoziya - 30%:70% 3600 ltr capacity |
40 | Supply, stacking and plantingwell developed tree of average height 1.5m (+/- 10 cm) sapllings of approved mix of species including cost of all materials, labour, labour, digging pits, cess, royalties, conveyance, applicable taxes and T&P etc.complete in all respect as directed by Engineer-in-Charge. |
41 | Providing and fixing fixing colored profile sheet in roofincluding drilling holes in wind ties including fixing of ridges valleys wind ties, packing the joint gaps etc. Roof ( 8 x 1/2 x 4.5 x 3) |
42 | Supply and installationstainless steel sign board as per drawings and details and as directed by Engineer-in- Charge. Stkiering/ lettering charges will be paid extra |
43 | Providing stikering works for sign baords of required text height and style as per direction of engineer in charge Main Entrance(2.25,Cum) Internal(1.08,,Cum) |
44 | Sinking of 200mm / 150mm dia production well through DTH Rig -Supplying all labour, T&P for drilling a perfectly vertical bore hole of specified dia for specified depth below GL through consolidated & unconsolidated rock with combination drilling rig as required to suit the site conditions including use of own rig with its accessories of 200/150mm dia PVC/GI/MS pipe for housing fitted with socket & with or without well screen as per the necessity for the soft, medium, hard & boulder formation. (PVC/GI/MS casing pipes if required to prevent collapse of over burden is to be fitted by the contractor including lowering & withdrawing after completion of tube well). 200mm dia to 400mm dia in over burden portion including packing of gravel supplied by the contractor for 400mm bore only tec. 200mm dia bore |
45 | Supplying all labour, T & P for lowering the following size PVC casing pipe with or without slotted pipes as per the necessity from G.L up to required depth & fitted & fixed up in perfectly vertical position including cutting & threading & slotted pipes & supplying & fixing all jointing materials T & P etc all complete & keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials etc all complete as per the direction of EIC 200mm dia PVC casing pipe |
46 | Supplying all labour and T & P for cleaning & developing the tube well with their own compressor continuously worked till clear & adequate discharge is obtained from the tube well including supply & use of all necessary equipments & labour charges etc complete. |
47 | Supply of 200mm dia PVC pipe Sch-80 |
48 | Supply of 200mm dia PVC pipe strainer pipe Sch-80 |
49 | Supplying, fitting and fixing of 1"size nylon rope of approved quality for lowering and tying of Submserssible pump in bore well complete as per direction of engineer in charge. |
50 | Submersible Pump set Supply and delivery at site brand new Kirloskar/ Wilo Mather & Platt/ Grundfosor any otherequivalent make as per approval of engineer in charge ofsuitable HP deep well submersible pump set suitable for vertical installation in 150 mm dia borewells comprising of single stage or multistage CF pump close coupled by means of stainless steel coupling to suitable HP suitable speed totally enclosed and filled with pure drinking water (wet type) squirrel cage submersible induction motor suitable for operation on 3Ph, 50 Hz, 380/440 volts AC Supply fitted with required accessories such as suction, casing, suction strainers, sand guard, non-return valve etc., complete.The pump and motor shall form an integral unit with all the required fittings PUMP: The submersible pump conforming to the latest IS 8034 (2000) amended upto date. The pump shall be submersible bore well type directly coupled to submersible electric motor with built in anti thrust bearing. The pump set shall be complete with suction strainer, anti-thrust streamlined non return valve and submersible type copper conductor cable of suitable size. Inlet passage of the suction casing shall be designed reduce entry losses and strainer shall be provided in suction casing to restrain large solids entering the pump. For submersible type cables, clamping arrangement and cable guard shall be provided on pump casing Each metallic impeller shall be dynamically balanced to Grade G 6.3 of IS 11723 The pump characteristic shall be non overloading type to ensure trouble free operation in the entire operating range. SUBMERSIBLE MOTOR – The submersible motor shall conform to IS 9283. The electric motor shall be single phase squirrel cage, water filled submersible type. The motor shall be suitable for operation on 160 to 240V (single phase), 50 Hz electric supply with required RPM capable of delivering the rated output with • The terminal voltage differing from its rated value by not more than +6% and -15% • The frequency differing from its rated value by not more than 3% or • Any combination of i) and ii). Motor shall be capable of running continuously at a B. H. P. (brake horse power) not less than 10% in excess of that absorbed by pump set under any operating conditions Starting current for the motor shall be limited to 6 times the full load current. Motor shall have minimum starting torque of 140% FLT and maximum starting torque 200% FLT. It shall have 100% FLT during running condition. Contractor shall submit the motor details including manufacturer’s guarantee for efficiency and P.F. at full load, no load, 3/4 load, 1/2 load. Material of Construction Pump bowl: High graded CI Impeller : Bronze Gr LTB2 / 20% Glass filled Noryl Diffuser: 20% Glass filled Noryl Stage casing: High graded CI Motor casing : SS 304 Pump shaft: SS 410 Motor shaft : SS 410 Bearing bush : Bronze IS 318 Gr LTB 2,3,4,5 Base : Cast iron / Brass Fasteners : SS 304 Strainers : SS 304 |
51 | Three phase submersible pump controller - Supply, storing at site, Installation,Testing and Commisioning of cubicle type single phase submersible pump controller with Incoming MPCB, DOL starter, contactors and relay to provide ON/OFF operation, overload protection, auto ON, indications of supply ON/OFF and pump ON/OFF (LED cluster type), Dual analog meter for voltage and current indication. These controllers shall be suitable to be wall mounted/surface mounted.. 1 No. Triple pole heavy duty flush mounting type MPCB of Siemens/BCH/L&T/YULE/MEI/GEC/C&S make 1 No. 72mm dia circular type suitably sealed flush mounting moving iron dual meter for voltage and current indication of AE/UE/MECO/SIMCO make with three way on and off selector switch. 1 Set of phase indicating lamps, filament type of low watt consumption provided with series resistant wherever necessary and with translucent lamp cover SIEMENS/L&T/BCH/YULE/EE make 1 No. indicating lamp for motor "ON" filament type of low watt consumption with series resistor wherever necessary and with translucent lamp cover SIEMENS/L&T/BCH/YULE/EE make. 1 No Current sensing type single phase preventor-cum-sequence relay of make L&T/SIEMENS/MINILEC make. 1 No. Push button operated fully automatic air break contactor operated direct online starter with thermal over load relay of Siemens/L&T/BCH/MEI/YULE/Crompton Greaves/EE make Motor Starter (three phase) - Up to 7.5 HP |
52 | Submersible Cable Supply & delivery, installation with necessary terminations of PVC insulated Xst copper conductor flat submersible cable 1.1 KV grade conforming to latest Indian Standard Specification & direction of Engineer in charge 1x3x2.5 sqmm |
53 | Providing, laying, joiting, testing HDPE pipe of PE 80 grade and pressure rating of PN 10 complete as per specification and direction of engineer in charge. 63mm dia |
54 | Supply, delivery and fixing of brand new suitable size of brass/gun metal ball valve as per relevant IS specification including all required fittings. 50mm dia |
55 | Supply, delivery and fixing of brand new suitable size of brass/gun metal Non Return valve as per relevant IS specification including all required fittings. 50mm dia |
56 | Supplying all materials, labour and T&P and laying in trenches, unplasticized class 3 PVC pipes conforming to IS 4859 including required fittings such as adopter (male/female), tee, bend elbow tapper etc. as required including testing as per specification all complete for following nominal diameter as per direction of engineer in charge. 110mm dia |
57 | Supplying all materials, labour and T&P and laying in trenches, unplasticized PVC pipes conforming to ASTM-D-1785/89 including required fittings such as adopter (male/female), tee, bend elbow tapper etc. as required including testing as per specification all complete for following nominal diameter as per direction of engineer in charge. 50mm dia |
58 | 40mm dia |
59 | 32mm dia |
60 | 25mm dia |
61 | 20mm dia |
62 | 15mm dia |
63 | Supplying all labour and T&P for fixing Brass Bib cock / Push cock of the following size as per specification all complete 15mm dia |
64 | upplying all labour and T&P for fixing Brass screw down Stop cock of the following size as per specification all complete 20mm dia |
65 | Supplying all materials,labour and T&P forinstallation ofO.H.service tank(PVC) on the existing roof of the building as per drawing,specification and direction of Engineer-in-charge etc all complete.3 - Layer White |
66 | Supply, installation, testing & commissioning of following 230-250V lighting fixtures (with suitable controlgear, electronic controlgear for LED)etc. including necessary accessories, lamps, wiring connection chain, down drops, supports etc. Post Top Light- 45W IP 65aluminium spigot housing LED Post Top. Make- Bajaj cat no BGCP 45W LED WW or equivalent. |
67 | Philips Make LED surface Mounted baton light model no BN021C LED20S PSU CW GR S2 or Equivalent |
68 | 12W LED Bulb: Make BAJAJ LED BULB 12W B22 or equivalent. |
69 | 3 Mtr pole suitable for post top light fixtures Bajaj Decorative pole With foundation bolt and all controlling accessories ( DP/MCB etc.) Model No. BJPL 01 300 |
70 | S/F of BEE 5 star rated 48" Ac ceilling Fan w/o Regulator of model Usha Ergo 5 star(beige brown/royal green )/Bajaj Regal star (ivory/white)/Crompton Greaves Aura plus(white/titanium) |
71 | Supply and fixing of Electronics step typeModularfan regulator. (Make-Cona/ Anchor/ Usha/Bajaj) |
72 | Installation, Testing and commissioning of ceiling fan including wiring the down rod of standard length (up to 30 cm) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor including providing and fixing phenolic laminated sheet cover on the fan box etc. as required |
73 | Supply and fixing of 20 amp 240 V SPN industrial type socket outlet with 2 pole and earth metal encloser plug top along with 20 amp "C" series SP MCB in sheet steel enclosure on surface or in recess with chained metal cover for the socket outlet and complete connections, testing and commissioning etc. as required |
74 | Supply and fixing of Modular switch ,Socket , T.V Socketand Telephone socketetc. (Make-Anchor/Cona/Havess, Great White) 6 Amp switch (Modular type ) |
75 | 6 Amp socket( Modular type) |
76 | Supply and fixing of Modularmetal box of following size (nominal size) on surface/Recess with suitable size of Modularcover in front including cutting the wall and making good the same in cases of recessed conduit as required (Modular box + cover+ fixing + Labour cess) 2 Modulee |
77 | 3 Modulee |
78 | Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 6Amp, 250V Modular switch ISI marked and ceiling rose ISI marked mounted on metal box having front Modular cover of suitable size, metal box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection.(Make of wire-L&T/Anchor/Havells/V-Guard/Great White/HPL) Group-B |
79 | Recessed wiring for light / power plug with 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC flexible conduit alongwith 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing as required. (Make of wire-Finolex/L&T/Anchor/Havells/V-Guard/ HPL) |
80 | Earthing with G.I. earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing massonary enclosur with cover plate having locking arrangement and watering pipe etc with charcoal and salt as required |
81 | Extra for using salt and charcoal for G.I. or copper pipe earth as required |
82 | Supplying and laying 25 mm x 6 mm G.I. earth strip ISI marked at 0.5 meter below ground level as strip earth electode including soldering etc. as required |
83 | Supply, installation, testing & commissioning of 8 SWG GI wire for external lighting and motor terminals as required including inter connection between length at joints, all fixing accessories saddles clamps etc, and other fixing hardware material as required for proper installation. |
84 | Supply, testing, tagging, laying and commissioning following sizes of 1100 Volt grade, XLPE / PVC insulated multistrand Al. / Cu. Conductor armoured / unarmoured cables (As Per IS 1554 & IS 7098) in readymade RCC trench, in provided DWC pipe, RCC pipe hume pipe, on provided cable trays / ladders etc. as. required complete with clamps, hardware for fixing tagging, identification etc. 4C x 16 sq mm A2XFY armouredAL Cable |
85 | 4Cx10 SQ.MM. Al 2XFY CABLE |
86 | 4C x 4 Sq mm 2XFY armouredCU Cable |
87 | 4C x 1.5 Sq.mm. YYCU Cable.( Flexible ) |
88 | Supply and making end termination with brass compression gland and aluminium logs for following size of PVC insulated and PVC sheathed / XLPE aluminium cable of 1.1kv grade (without cost of cable ) as required. 4C x 16 sq mm |
89 | 4Cx10 SQ.MM. Al 2XFY CABLE |
90 | 4C x 4 Sq mm 2XFY armouredCU Cable |
91 | 4C x 1.5 Sq.mm. YYCU Cable.( Flexible ) |
92 | Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size not exceeding 25 mmsq direct in ground including excavation, sand cushing, protective covering and refilling the trench etc. as required Supply includingfitting and fixing of outdoor cable 4 way Polycarbonate Junction Boxes IP 67 & IK08 halogen free and weather proof for outdoor installationBase with metric knock-outs and PUR gasket, screws for mounting plate/DIN-rail and cover with polyamide cover screws. including all accessories complete as specified and directed by the Deptt. |
93 | Junction Box Size with 100x100x75 mm for Cable size 4Cx10sq.mm (main cable), 4Cx2.5 sq.mm & 4Cx4 Sq.mm (tap off cables) as in the above items. The junction box shall be suitable for outdoor application with minimum IP65 protection. |
94 | SITC of Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene (conforming to IS 16205) with necessary connecting accessories of same material at required depth for laying of cable. below ground/ road surface for enclosing cable and back filling the same to make ground as per original. 100MM |
95 | Supply, Installation, Testing and Commissioning of double door prefabricated recessed type MCCB/MCB DBwith CRCA sheet fabrication with powder coated body concealed in wall or on support structure. Steel support fabrication shall be considered separatly, with appropriate cable termination arrangement. Outdoor Type IP 65Outdoor Lighting Feeder Pillar as per specification |
96 | Indoor SPN MCB DB 2+4 WAY |
97 | Supply, Installation, Testing and Commissioning of LT 3phase meter as per WESCO specification including liasoning, approval from Electrical Inspector, inspection, etc. |
98 | Supply and fixing of 32 amp rating 415 V "B" series miniature circuit breaker suitable for lighting and other loads of Four Pole in the GI sheet MCB DB enclosure ISI marked complete with connections testing and commissioning etc. as required |
99 | Supply, testing, tagging, laying and commissioning following sizes of 1100 Volt grade, XLPE / PVC insulated multistrand Al. / Cu. Conductor armoured / unarmoured cables (As Per IS 1554 & IS 7098) in readymade RCC trench, in provided DWC pipe, RCC pipe hume pipe, on provided cable trays / ladders etc. as. required complete with clamps, hardware for fixing tagging, identification etc. 4Cx16 sqmm, Al, Armoured, XLPE |
100 | Supply and making end termination with brass compression gland and aluminium logs for following size of PVC insulated and PVC sheathed / XLPE aluminium cable of 1.1kv grade (without cost of cable ) as required. 4Cx16sqmm Al, Armoured, XLPE |
101 | Carrying out topographical survey |
102 | Operation & Maontenace for one year @ 5.79/sqm x 12 =69.48 per year |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail