Housing Urban and Rular Development Government Departments Closing in 0 days TDR #28881257

Repair / Renovation Dak Banglow Tattapani

Issued by Government Departments · nowshera, Jammu And Kashmir
Tender Value
15 Lakhs
Estimated cost
Bid Submission
24 Aug 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
150
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
nowshera → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Repair / Renovation Dak Banglow Tattapani

BOQ

Name of Work: Repair and Renovation of Dakbangloo Tatapani .
Sl. No. Item Description
1Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls completeincluding disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 fine sand)
212mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand)
3French spirit polishing, Two or more coats on new works including a coatof wood filler
4Applying one coat of water thinnable cement primer of approved brandand manufacture on wall surface.
5Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)
6Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc complete.50 mm thick with 20mm nominal size stone aggregate
7Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.In colour such as White, Ivory, Grey, Fume Red Brown
8Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 2 mm thick
9Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded
10Providing and fixing M.S. grills of required pattern in frames of windows etc.with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to steel windows by welding
11Finishing walls with water proofing cement paint of required shade:Old work (one or more coats applied @ 2.20 kg/10sqm) overpriming coat of primer applied @ 0.80 liters/10sqm complete including cost of priming coat.
12Painting with synthetic enamel paint of approved brand and manufactureto give an even shade.Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.
13Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
14Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Cold twisted bars
15Providing and fixing at all height false ceiling of 4mm thick phenol bonded Bamboo Mat board (595x595mm) conforming to IS:13958-1994 including providing and fixing of frame work made of GI angle 25x25x0.4 mm thick all around suitably fixed to wall with the help of dash fastener and hanger frame (600x600 c/c) made GI slotted Tee having powder coating on bottom side (30x25x0.3 mm thick for main member & 25x25x0.3 mm for cross member) connected to ceiling with 2.64mm GI wire and anchor fastener at every junction and also including cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed all complete as per direction of Engineer-in-charge.
16Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete
17Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screw Second class deodar wood.
18Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: White vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps.
19Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
20Providing and fixing Stainless steel A ISI 304 (18/8) Kitchen as per I.S. 13983 with C.i. brackets and stainless steel plug 40mm, including painting of fittings and brackets, cutting and making good the walls wherever required.: 510x1040mm bowl depth 225mm.
21Mirror with plastic moulded frame each 826.00 rectangular shape 1500x450 mm
22Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.:15 mm dia. nominal bore
23Providing and fixing brass bib cock of approved quality. 15 mm nominal bore
24Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete.
25Providing and fixing white vitreous china pedestal type whater closet (european type W.C. pan) with seat and lid. 10ltr low level white P.V.C flushing cistern, including flush pipe with manually controlled devised (handl lever), conforming to is : 7231, eith all fittings and fixtures complete, including cutting and making good the walls and flors whereverrequired: 18.3.1 W.C pan with 1st marked white solid plastic seat and lid.
26Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manuallycontrolled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.
27Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions allcomplete.With 2nd class teak wood beading 62x19 mm
28Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40mm thick.4 mm thick glass pane (weighing not less than 10 kg/sqm)
29Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :
30Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
31Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-All work upto plinth level in 1:3:6(1cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size crushed using plums (size not over 160mm split nallah stone or quarrystone crushed @ 30% of grass volume)
32Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns
33Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platforms
34Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand)
35Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level cum
36Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth asdirected:All kinds of soil :
37Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Hard drawn steel wire fabric
38Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorptionless than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of tile 600x600 mm
39Carriage of material by mechanical transport from source to the site of work including loading/unloading and stakcing complete.
40Sand for an av. lead 95 Kms distance by M.T
41Bajree/Stone aggregates below 40mm nominal size for an av.distance 25Kms by M.T
42Brick for an av.lead of 90 Kmsdistance from Jammu

AI Tender Summary

OUR REF NO 28881257
AUTHORITY Government Departments
TENDER VALUE 15 Lakhs
LAST DATE 24-08-2021
Authority
Authority Name Public Works Department
Work Description Repair / Renovation Dak Banglow Tattapani
Basic Detail
Tender No eNIT No 22 of 2021/22 dated 16/08/2021
Bidding Type Tender
Location
City nowshera
State Jammu And Kashmir
Key Dates
Publish Date 17 Aug 2021
Submission Date 24 Aug 2021
Open Date 25 Aug 2021
Finance
Tender Value 15 Lakhs
Tender Fee 150
EMD Ref. Documents
Exemption Not Available
Document List
6636471b-ecc9-476c-a7fe-3c1059b4b5f1.html
BOQ_270089.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 17, 2021
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 24, 2021
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Aug 25, 2021

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

6636471b-ecc9-476c-a7fe-3c1059b4b5f1.html

xls

BOQ_270089.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender