Military Engineer Services-MES has published Spl Repair Of Remotely Piloted Aircraft ( Rpa ) Hanger Bldg No P 1130 Of Sata Regt And Bldg No P 713 ( Or Living ) Of Rkt Regt Under Ge ( N ) Bathinda At Bathinda Mil Station Spl Repair Of Remotely Piloted Aircraft ( Rpa ) Hanger Bldg No P 1130 O. Submission Date for this Tender is 04-10-2021. Powered Fixed Wing Aircraft Tenders in BATHINDA MIL STN Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 03-Sep-2021 | Amendment to date 1 | Date | 20-09-2021 |
| 2 | 13-Sep-2021 | Amendment to date 2 | Date | 21-09-2021 |
| 3 | 15-Sep-2021 | Amendment3 | Date | 27-09-2021 |
| 4 | 15-Sep-2021 | Amendment4 | BOQ | 27-09-2021 |
| 5 | 27-Sep-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 04-10-2021 |
| Sl. No. | Item Description |
| 1 | Taking out sealing compound from partially filled expansion joints of size 20mm wide upto complete depth from rigid concrete pavements/slab, cleaning of joints with brushes and fanning with compressed air to remove all loose dirt/dust etc. and M&L for primed with suitable primer and filled with compressible filler board ( Make Siliflex supreme or equivalent as approved by Accepting Officer, back up rod/ debonding strip and top 12 mm primed with suitable primer and sealed with polyurethane based sealing compound complete all as specified and directed by Engineer-in-Charge and all as per manufacturer"s instructions. |
| 2 | Taking out sealing compound from partially filled construciton / Dummy joints of size 10mm wide and 30 mmdeep of filled rigid concrete pavements/slab, cleaning of joints with brushes and fanning with compressed air to remove all loose dirt/dust etc. and M&L for back up rod/ debonding strip and top 10 mm primed with suitable primer and sealed with polyurethane based sealing compound complete all as specified and directed by Engineer-in-Charge and all as per manufacturer"s instructions. |
| 3 | M&L for preparation of old existing concrete floor surfaces of any description and in any position by brooming down/wire brushing & finally cleaning with compressed air and to make the surface dust free and M & L for providing overall 5 mm thickantistatic EPU flooring including prime coat, screed coat, copper tape, conductive coat, self levelling top coat and application of Epoxy polyurethane paint all as specified in PS and as per manufacturer"s instructions complete. |
| 4 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified. |
| 5 | M & L pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet in tile profile sheet 0.50 mm thick of any colour, having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified. |
| 6 | S&F 2mm thick fiber glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screwand washer in roof, wall etc complete all as specified. |
| 7 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. |
| 8 | M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified. |
| 9 | M&L for non skid ceramic colouredtiles, 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile with including 15 mm thick Screed bed or bedding layer in CM (1:6) complete all as specified. Note: Only course sand shall be used in screed bed. |
| 10 | S & F glazed ceramic coloured tiles 450x 350 x 7 / 350 x 250mm, 7 mm thick in vertical surfaces such as dado / skirting, set and jointed in neat cement slurry and pointed in white or coloured cement pigmented to the match the shade of tiles laid over andincluding 10 mm thick rendering in cement mortar(1:4) as backing coat and finish the surface rough to receive the tile complete all as specified. |
| 11 | M & L for non skid ceramic colouredtiles, 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm,in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the tiles an including 15 mm thick screed bed of motor (1:6) complete all as specified. |
| 12 | M & L for non skid ceramic colouredtiles, 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm as in vertical surface incl 10 mm thick backing coat in CM 1:4 complete all as specified. |
| 13 | M & L for double charged, light shade, vitrified ceramic tiles of size 600mm x 600mm, 9 to 10 mm thick (square / rectangular), polished,in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the tiles. with including 15 mm thick Screed bed or bedding layer in CM (1:6) complete all as specified. Note: Only course sand shall be used in screed bed. |
| 14 | M & L for double charged, light shade, vitrified ceramic tiles of size 600mm x 600mm, 9 to 10 mm thick (square / rectangular), polished as in skirting / dados incl 10 mm thick backing coat in CM 1:4 complete all as specified. |
| 15 | M & L for machine cut kota stone slab 20 to 25 mm thick as in flooring, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing laid over and including 15 mm thick Screed bed or bedding layer in CM (1:6) complete. |
| 16 | M & L for machine cut kota stone slab 20 to 25 mm thick as in riser of steps , skirting , dado and pillar, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing laid over and including 10 mm thick Screed bed or bedding layer in CM (1:6) complete. |
| 17 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards / slabs / blankets, any thickness, including cover fillets and removing from site. |
| 18 | S&F GI powder coated frame work 605 x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section ( not exceeding 1.2 metre length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified. |
| 19 | S&F gypsum board 12 mm thick, conforming to IS - 2095, ISI marked, in ceiling fixed with screw as per manufacturer"s instructions. |
| 20 | S&F hangers 3 mm dia GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 cm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified. |
| 21 | Taking down chowkats or frames with shutters (without taking off shutters from the frame)not exc 1.5 sqm each. |
| 22 | S&F factory made PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening all as specified in Preamble 8B.2.8 of SSR Part -II (2020) and all as shown on drawing on Sl Page No 160 of SSR Part-II (2020). (Make - Rajshree / Sintex / Duroplast ) |
| 23 | S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails.MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement all as per instruction and drawing shown for item No 8080 of SSR Part II. |
| 24 | S&F factory made solidPVC Moulded door shutter with particle board core, 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site all as specified in preamble 8B.4.1 and shown on drawing on Sl Page No 161 of SSR Part II (2020) and MES Schedule Part I clause 8.31.4.1. |
| 25 | S & F 75 mm butt hinges, aluminium anodized . |
| 26 | S & F 100 mm butt hinges, mild steel medium weight, cold rolled. |
| 27 | S & F 150 mm long aluminium anodised, handle "D" type |
| 28 | S & F 125 mm long aluminium anodised, handle "D" type |
| 29 | S & F 100 mm long aluminium anodised, barrel tower bolts of extruded section. (ISI Marked) |
| 30 | S & F 150 mm long aluminium anodised, barrel tower bolts of extruded section. (ISI Marked) |
| 31 | Taking down chowkats or frames with shutters (without taking off shutters from the frame)exc 1.5 sqm but not exc 4 Sqm each and removing from site including cutting holes for removal of hold fast complete. |
| 32 | S & F factory made pressed steel frames for door with one or more rebates including necessary fixing lugs, lock strike plate, hinges etc, complete, all as specified of frame size 125 mm x 60mm & thickness of MS sheet shall not be less than 1.25 mm including making holes for fixing hold fast etc and making good the wall with plaster in cement mortar (1:6) complete. |
| 33 | S & F factory made pressed steel frames for door with one or more rebates including necessary fixing lugs, lock strike plate, hinges etc, compete, all as specified of frame size 105 mm x 60mm & thickness of MS sheet shall not be less than 1.25 mm including making holes for fixing hold fast etc and making good the wall with plaster in cement mortar (1:6) complete. |
| 34 | S & F factory made anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 35 | M & L for PCC (1:3:6) type C-0 using 12.5 mm graded stone aggregate in filling in chowkats/ door frame or bed block of hold fast and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete. |
| 36 | S & F 35mm thick factory made panelled shutter (two panel) plain framed with lock rail and panel of 12mm thick veneered particle board with commercial veneering on both faces conforming to IS-3097 exterior grade kiln seasoned and chemically pressure treated of second class hard wood rails and styles and the size of rail and style as per IS-1003 (Part I) complete all as specified. |
| 37 | S & F factory made glazed and skeleton shutters 35mm thick using second class hard wood open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc; sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24(a); all as specified complete. |
| 38 | S & F galvanisedsteelwire cloth, 0.56 mm nominal dia of wire & average width of aperture 1.18mm and fixed with tinned tacked or galvanized steel wire staples complete. |
| 39 | S & F in repair galvanisedsteelwire cloth, 0.56 mm nominal dia of wire & average width of aperture 1.18mm and fixed with tinned tacked or galvanized steel wire staples complete. |
| 40 | S & F 300 mm long MS ordinary rat tail rod pattern springs for doors including roller and roller plate complete. |
| 41 | S & F 200 mm long aluminium anodised, barrel tower bolts of extruded section. (ISI Marked) complete all as specified. |
| 42 | S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type), and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, length of bolt 300mm. |
| 43 | S & F factory made steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded including one shop coat primer as directed. |
| 44 | S & F factory made steel windows with side hung shutters including box typehinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded including one shop coat primer as directed. |
| 45 | S & F factory made fixed type steel ventilator with glazing bar and steel peg stay complete as directed. |
| 46 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins / spring clips of size not exceeding 0.5 Sqm each pane complete. |
| 47 | S&F factory made powder coated aluminium door shutters, aluminium sections weighing not less than 0.55 kg/running metre including necessary joining cleats, glazing clips, rubber neoprene packing, handle 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc complete all as specified. (minimum thickness of power coating shall be 50 micron) |
| 48 | S&F factory made powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 nos.) suitable handle (1 no.) complete all as specified.(minimum thickness of power coating shall be 50 micron) |
| 49 | S & F figured glass pin head type sheet glass, 3 mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete. |
| 50 | S & F tinted sheet glass, 3 mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete. |
| 51 | S & F tinted sheet glass, 5.5 mm thick ordinary quality and glazing with oil putty in square exceeding 0.5 Sqm in each pane complete. |
| 52 | S & F frosted sheet glass, 5.5 mm thick ordinary quality and glazing with oil putty in square exceeding 0.5 Sqm in each pane complete. |
| 53 | S & F stainless steel wire cloth, 0.36 mm nominal dia of wire & average width of aperture 1.40mm and fixed with galvanized steel wire staples complete. |
| 54 | S & F floor door stopper of aluminium alloy body, and tongue, ISI marked, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm. |
| 55 | S & F door closer hydraulically regulated, designation No 3, universal type, aluminium (extruded section) body, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed. |
| 56 | Taking up or down 15 mm bore existing steel tubing and connections complete and re-fixing the same in new or old position to walls and ceilings or laid in floors including cleaning of pipeand provision of new fitting as required complete all as directed.. |
| 57 | Taking up or down 20 mm bore existing steel tubing and connections complete and re-fixing the same in new or old position to walls and ceilings or laid in floors including cleaning of pipeand provision of new fitting as required complete all as directed.. |
| 58 | Taking up or down 25 mm bore existing steel tubing and connections complete and re-fixing the same in new or old position to walls and ceilings or laid in floors including cleaning of pipeand provision of new fitting as required complete all as directed.. |
| 59 | M & L for 15mm bore GI pipe, medium grade, ISI marked, with all fittings and fixed complete to walls and ceilings or laid in floors. |
| 60 | M & L for 20mm bore GI pipe, medium grade, ISI marked, with all fittings and fixed complete to walls and ceilings or laid in floors. |
| 61 | M & L for 25mm bore GI pipe, medium grade, ISI marked, with all fittings and fixed complete to walls and ceilings or laid in floors. |
| 62 | S & F in repairs vitreous china squatting pan, "Orissa" pattern, size 580mm x 440mm, white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. including making good to floor and excluding flushing cistern, flush pipe and waste pipe complete. |
| 63 | S&F in repairs vitreous china wash down water closet pan (EWC) (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) |
| 64 | S&F in repairsplastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device. |
| 65 | S&F in repairs health faucetbrass body with wall hook and 1 mtr SS pipe complete all as specified. |
| 66 | S & F in repairs PVC valve less, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle complete. |
| 67 | M&L for 100mm dia cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1. |
| 68 | M&L for 75mm dia cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1. |
| 69 | S & F in repairs Stack clamps made out of 50 x 5 mm flat iron and 16 mm dia round iron stay including nuts , bolts and securing ends of stays to wall or roofcomplete for 100 mm bore dia pipe all as specified. |
| 70 | M & L in repairs, for 1200mm x 600mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood with aluminium frame 15 mm x 15 mm, fixed to wooden plugs with chromium plated brass screws and cup washers complete all as directed. |
| 71 | M & L in repairs, for 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood with aluminium frame 15 mm x 15 mm, fixed to wooden plugs with chromium plated brass screws and cup washers complete all as directed. |
| 72 | S&F 20mm dia decorative harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc as in curtain rails.(Note : The cost of brackets and knobs is deemed to be including in the quoted unit rate.Nothing extra shall be paid on this account.) |
| 73 | S&F in repair PVC connection of length 450 mm, 15 mm size with brassnuts of approved quality. |
| 74 | S & F in repairs, 15 mm bore chromium plated, quarter turn, bib taps cast copper alloy with crutch or butterfly handle, screwed for iron pipe, or for brass ferrule complete all as specified and as directed. |
| 75 | S & F in repairs stop valves, cast copper alloy, fancy type, quarter turn, chromium plated with long shank and cup screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions for 15 mm bore dia of pipe. |
| 76 | S & F in repairs stop valves, cast copper alloy, fancy type, quarter turn, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions for 15 mm bore dia of pipe. |
| 77 | S & F in repairs brass chromium plated shower rose 125 mm sizewith or without swivel joints fix to steel pipe or union complete all as specified and as directed. |
| 78 | S & F in repairs brass chromium plated tubular towel rail,20mm dia, D type, 60cm long between flanges. |
| 79 | S&F brass chromium platedsoap dish fixed to wall with brass screws as per Cat Part No AQN-7731 of Jaquar or equivalent Cat Part of make approved in Appendix attached here-in-after. |
| 80 | M & L for precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate in landings, cover slabs (for manholes etc), chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar (1:4). |
| 81 | M & L for TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 82 | M&L for granite (of any type) work 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and including 10 mm thick rendering incement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 83 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations etc complete all as specified and directed. |
| 84 | S & F in repairs vitreous china wash hand basin, countersunk in granite slab , white, of size 550mm x 400mm , excluding waste, chain and plug and porcelain stopper but including 32 mm dia waste coupling fancy type chromium plated and PVC waste pipe of 32 mm dia and fixed all as directedcomplete, . |
| 85 | S & F in repairs vitreous china wash hand basin,white, of size 550mm x 400mm , excluding waste, chain and plug and porcelain stopper but including 32 mm dia waste coupling fancy type chromium plated ,and PVC waste pipe of 32 mm dia and fixed all as directedcomplete, . |
| 86 | S & F vitreous china urinal, half stall type, white with grating and union for discharge pipe excluding flushing cistern , flush pipe & waste pipe and providing and fixing plugs bedding urinal against wall in cement mortar (1:2) securing urinal to plugs with and including connections to flushing pipe and out pipes complete . |
| 87 | S&F pillar taps, cast copper alloy, with capstan heads, fancy type, quarter turn,chromium plated, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly nuts, screwed for iron pipefor 15mm bore dia of pipe. |
| 88 | S & F Gun metal globe or Gate valve , with iron wheel , screwed both ends for iron pipe or for unions for 20 mm bore dia of pipe |
| 89 | S&F in repairs vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe, and waste pipe) including connections to flushing pipe complete. |
| 90 | S&F 1000 liters capacity Rotational moulded polyethylene in white colour, three layered, water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old water tank of any size and any type and removing from site etc all as directed. |
| 91 | S&F ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of size 20 mm bore (minimum weight 25mm-455 gram). |
| 92 | Demolition and breaking up drain pipes of any description of any size complete all as specified and directed. |
| 93 | S&F PVC (SWR) 110mm bore pipes single socket, ISI marked, in any length with rubber ring joints, laid in trenches or in floors. |
| 94 | S&F PVC (SWR) 75mm bore pipes double socket, ISI marked, in any length with rubber ring joints, laid in trenches or in floors. |
| 95 | S&F PVC (SWR) 75mm bore bends of any radius complete all as specified and directed. |
| 96 | Taking down rain water pipe any size including all fittings complete. |
| 97 | S & F PVC (SWR) 110mm bore rain water pipes, ISI marked, single socket, in any length with rubber ring joints, laid in trenches or floor or fixed to wall all as directed . |
| 98 | S & F 110 mm bore PVC bends ISI marked of any radius / shoe,fixed to PVC pipes all as directed. |
| 99 | M & L 75 mm dia (spun type ) cast iron soil waste & vent pipe drain pipes fixed to wallincl all fittings, jointed in cement mortar including taking out old pipes, if required. |
| 100 | M & L 75 mm dia (spun type ) cast iron soil waste & vent pipe drain pipes laid in trenches incl all fittings, jointed in cement mortar including taking out old pipes, if required. |
| 101 | M & L 100 mm dia (spun type ) cast iron soil waste & vent pipe drain pipes fixed to wallincl all fittings, jointed in cement mortar including taking out old pipes, if required. |
| 102 | M & L 100 mm dia (spun type ) cast iron soil waste & vent pipe drain pipes laid in trenches incl all fittings, jointed in cement mortar including taking out old pipes, if required. |
| 103 | M & L 150 mm dia cast iron soil waste & vent pipe drain pipes fixed to wall or laid in trenches incl all fittings, jointed in cement mortar including taking out old pipes, if required. |
| 104 | S & F 100mm dia cast iron bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door complete. |
| 105 | S & F 100mm dia cast iron bends (any radius), diminishing pieces or tapers (large bore measured). |
| 106 | S & F 150mm dia cast iron bends (any radius), diminishing pieces or tapers (large bore measured). |
| 107 | S & F 75mm cast iron Cowl fixed with cement joint in CM 1:2 complete all as specified. |
| 108 | S & F 75 mm dia cast iron branch pieces, single (equal or un-equal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete. |
| 109 | S & F 100mm cast iron Cowl fixed with cement joint in CM 1:2 complete all as specified. |
| 110 | S & F 100 mm dia cast iron branch pieces, single (equal or un-equal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete. |
| 111 | S & F SGSW Gully trap of size 150 x 150 mm, set and jointed to drain in CM 1:1 complete all as specified. |
| 112 | S & F 75mm dia cast iron bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door complete. |
| 113 | S & F 75mm dia cast iron bends (any radius), diminishing pieces or tapers (large bore measured). |
| 114 | Taking down old cement plaster on brick or concrete walls etc including raking out joints hacking for key scrubbing down with water etc and removing rubbish to a distance not exceeding 250 mtr away complete all as specified. |
| 115 | M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces / stone masonry in cement mortar (1:6), finishing the surface even and smooth without using extra cement. |
| 116 | M & L for rendering 15 mm thick in cement mortar (1:4) on external wall surfaces of brick work or concrete surfaces even and fairwithout using extra cement mixed with liquid water proofing material as per manufacturer"s instruction i complete all as specified. (Note – Liquid WPM shall be measured and paid for separately.) |
| 117 | M & L for rendering 5 mm thick in cement mortar in (1:3) finishing the surfaces even and smooth on ceiling without using extra cement complete all as specified. |
| 118 | Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work exceeding 15cm but not exceeding 30cm in width or girth; including cutting to edges, all mitres and stopped ends, etc. |
| 119 | M & L for preparation of newly plastered surfaces of external walls and apply two coats of distempering over a coat of birla white putty compete all as specified. |
| 120 | M & L for two coats of weather proof exterior emulsion paint incl preparation washing rubbing down and stopping of paint surfaces over newly plastered surfaces of external walls compete all as specified. |
| 121 | M&L for applying three coats of white wash on newly plastered surfaces of ceiling preparation of surfaces. |
| 122 | M & L for two coats of weather proof exterior emulsion paint incl preparation washing rubbing down and stopping of paint surfaces over old surfaces of walls compete all as specified. |
| 123 | M & L for complete removal of existing treatment on walls etc by scraping , sand papering or by using mechanical sander and preparing plastered surfaces and applying two coats of oil emulsion distemper of approved tint on old walls by using roller/ spray machine incl a coat of birla wall care putty complete all as specified. |
| 124 | M & L for two coats of white wash incl preparation washing rubbing down and stopping of paint surfaces over newly plastered surfaces of ceiling compete all as specified. |
| 125 | M & L for preparation of old steel surfaces of any description, over 10 cm in width or girth, and applying one coat of synthetic enamel paint compete all as specified. |
| 126 | M & L for preparation of new steel surfaces of any description, over 10 cm in width or girth, and applying two coat of synthetic enamel paint compete all as specified. |
| 127 | M & L for applying one coat of synthetic enamel paint on wooden surfaces of any description, not otherwise, described over 10 cm in width or girth, including preparation of old painted surface compete all as specified. |
| 128 | M & L for painting to new wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces complete all as specified. |
| 129 | Digging out and removing sunken floor filling and depositing the same at a distance not exceeding 250 M away from the bldg where as directed complete all as specified. |
| 130 | Supply only water proofing material, ISI marked. |
| 131 | M&L for sunken treatment to sunken floor, cleaningthe surface by using wire brush, rendering to floor and sides with 10 mm thick cement mortar (1:4) including mixing of liquid water proofing material @ 200ml per bag of cement, finished even and smooth without using extra cement after that material & labour for providing two coats of two components (one part liquid two parts powder) ready to use cementations water proofing coating on properly prepared surfaces by brushing having elongation of >50% for the applying water proofing treatment as per following on horizontal and vertical surfaces of sunken floor complete all as per manufacturers instruction. (i) Applying 1st coat of two components modified polymer coating. (ii) Provn of glass fiber mess of 2 x 2mm immediately on alone coating. (iii) Apply 2nd coat of two components modified polymer coating after 72 hrs on horizontal and vertical surfaces. Note :- WP Materialsshall be measured and paid for separately. |
| 132 | M & L for 30mm thick PCC (1:2:4) type B0 using 12.50 mm graded stone aggregate with using water proofing compound as per manufacturer"s instruction as in sunken floor all as specified.. (Note :- WP Materialsshall be measured and paid for separately.) |
| 133 | M & L for PCC (1:7:12) type F2 using 40 mm graded stone aggregate with using liquid water proofing compound @ 0.20 ltr per bagof cement as in filling& mass concrete in sub base , floorall as specified. |
| 134 | S & F Welded steel wire fabric not exceeding 4kg per Sqm in weight complete fixed to wood or steel members complete. |
| 135 | S & F Hexagonal wire netting (chicken wire mesh) in repairs, 10mm apprature and 0.63mm dia welded/ fixing to steel or wooden members complete. |
| 136 | Demolition of PCC (unreinforced) in ground floor and paving not exceeding 15cm thick (below or above ground floor) and removing the debris upto a distance exceeding 1 km but not exceeding 2 km etc complete all as specified. |
| 137 | M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified. |
| 138 | M& Lfor pavement quality concrete (PQC) RMC ( RMC manufacturer approved by GE) with minimum flexural strength of 45 Kg per sqcm with minimum cement contents of 400 Kg/cum in field or as per design mix which ever is higher ( thickness 25cm or less) mixed with and including non circular synthetic fibre @ 0.25% by weight of cement as in floor , hard standing/paving/path etc including setting the material by vibrating with using mechanical vibrator and top surface finished even and smooth without using extra cement including necessary steel platesform work for sides of slab including demolition of unreinforced PCC in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 139 | Supply only polyster non circular/ triangular synthetic fibre 12 mm long with circum circle diameter 30-35 micron designed for melting point of 240-260 degree "C" and having gravity of 1.34 to 1.40 complete all as specified. |
| 140 | Forming 20mm thick expansion joints in 150mm thick concrete slab filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade "A" complete all as directed. |
| 141 | M & L for non metallic concrete floor hardner @ 5 Kg / Sqm in two layers and laid all as specified / manufacturer"s instructions.(Make - PIDITOP 333 of Dr Fixit or equivalent make of STP/BASF/Sika/Thermax) |
| 142 | Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlars facings, dressed stone work and pre cast concrete articles. |
| 143 | M&L for brick work using sub class ‘B’ old size bricks, straight or curved on plan exceeding6m mean radius, built in CM (1:6). |
| 144 | S & F MS framed work such as grills, gratings, etc., with end of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe 290 Gde E-165. |
| 145 | Removing and refixing of existing door panel of approx size 4 x 8 , replacing broken axle of dia 50 mm greasing, oiling, easing , including necessary welding and proper functioning of all gates complete all as specified and as directred. |
| 146 | M&L for marking on runway/ helirunway pad/ pavements, like lines , dashes, arrows, letters or figures etc, with hot applied retroreflective thermoplastic road marking paint (in any colour as directed like white, golden, yellow, orange, black etc ) conforming to MORT&H (clause 803.4) with 8% glass beads using special applicator machine with heating arrangement upto 160 degree C including cleaning and drying the existing road surfaces to ensure dust, oil, grease and moisture free surfaces before applying the paint complete all as specified and directed. |
| 147 | Forming 20mm thick expansion joints in 100mm thick concrete slab filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade "A" complete all as directed. |
| 148 | Dismantling of brick tiles or terracing tiles, single layer on roofs including removing the demolished material not exceeding 250 mtr away from site and disposal off in low lying area as directed. |
| 149 | Demolition of mud in roof, any thickness including plastering and leaping (where full thickness recovered or only a part there of) including removing the demolished material not exceeding 250 mtr away from site and disposal off in low lying area complete. |
| 150 | M&L for wire brushing and cleaning top surfaces of roof slabs etc, including washing the roof surface with water and making the surface free from mud etc complete all as specified. |
| 151 | M & L for 15mm (avg thickness) rendering in cement mortar (1:3) on roof surface including flashing and junctions of parapets etc finished with even and fair WPC as per recommended ration after brushing cement slurry @ 1.20 Kg / Sqm complete all as specified. |
| 152 | M & L rendering 15 mm thick C;M 1:4 mixing with WPC @ 200 ml per bag of cement on fair faces of concrete surfaces on roof slab after wire brushing and cleaning top surface of cement concrete all as specified and wire brushing and cleaning top surface of tile, lime terracing or cement concrete , includingflashings and junction of parapets etc and surface painting with a layer of blown bitumen of any penetration applied hot @ 1.70 kg/Sqm and priming surface and applying APP Based Polymeric membrane minimum weighing 3kg/Sq, and minimum thick 3mm reinforced with polyester non wove fabric ( wt not les than 150 gm/sqm) land on primed surface by forced application as treatment for moderate conditions complete all as specified. |
| 153 | M&L for 40 mm thick brick tiles laid on mud mortar or CM (1:6), 20 mm thick and joints grouted flush in CM (1:3) mixed with @ 5%of crude oil by weight of cement or mud phuska complete all as specified. |
| 154 | All as per item No.153.but except brick tiles complete all as specified. Note :- Old serviceable brick tile to be reused after cleaning and washing. |
| 155 | M & L providing lime concrete or cement concrete in (1:3:6) type C2 using 40 mm graded stone aggregates as leveling course on roof slab. |
| 156 | M & L for 75 mm thick PCC (1:3:6) type C2 using 40mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified.. |
| 157 | Demolition of RCC of any description and in any position not otherwise specifically provided for,(reinforcement cut as required to facilitate demolition). |
| 158 | M & L for RCC (1:2:4) type B1 using 20 mm graded stone aggregate in chajjas, lintel etc complete all as specified. |
| 159 | Use and waste of form work to curved surfaces like chullah hood , chajjah and similar items including edgesrough finished surfaces of concrete all as specified. |
| 160 | M & L for preparation of new plastered surfaces of walls/ pillars / cornices applying the following:- (i) Applying wall care putty in one coat (2mm each) on wall surfaces & smoothening the surface with sand papers/ mechanized sanding etc (preparatory to paint as directed) complete all as specified. (ii) Two coats of oil bound distemper of approved tint by using airless spray / roller. |
| 161 | M & L for preparation of old plastered surfaces of internal walls and applying the following:- (i) Applying wall care putty in one coat (2mm each) on wall surfaces & smoothening the surface with sand papers/ mechanized sanding etc (preparatory to paint as directed) complete all as specified. (ii) Two coats of oil bound distemper of approved tint by using airless spray / roller. |
| 162 | M & L for preparing newly plastered surfaces of external walls and applying Two coats of cement base paint of approved tint by using roller/ brush over and including a coat of cement base primer completeall as specified. |
| 163 | Complete removal of existing treatment of internal wall (any number of layears) by scrapping with steel wire brushes or any other means, including filling depressions of scrapped surfaces and M & L for preparation of old plastered surfaces of walls and applying the following:- (i) Two coats of cement base paint of approved tint by usig airless spray/ roller over and including a coat of acylic internal primer. |
| 164 | S & F in repairs steel window handle MS , Left / Right of size 150mm. |
| 165 | Dismantling of stone slab and tiles of any description and in any thickness in floor , apron etc flat , laid , bedded and pointed in any mortar all as directed. |
| 166 | S&F 60 mm thick coloured interlocking tiles of made of cement concrete grade M-35 as per IS-15658-2006 of approve design laid over and including 25 mmthick sand filling complete all as specified and directed. |
| 167 | S & F plain mild steel 2.50 mm dia wire, galvanised class 3, in detached work such as for mosquito nets and fixing with angles with necessary fittings, etc. |
| 168 | M & L for Lime concrete in mix 1:2:4 using 40 mm graded brick aggregate, laid to slope as directed by Engineer in charge over RCC roofs as padding complete alll as specified. Note: Minimum thickness of lime concrete at lower end shall not be less than 50mm. |
| 169 | M & L for 20- 22 mm thick factory made PCC tiles of size 250mm x 250mm with grey cement and no pigment , bedded in cement mortar (1:4) 15 mm thick and joints grouted flush in CM (1:3) mixed with @ 5%of crude oil by weight of cement over lime concrete roof padding, complete all as specified. |
| 170 | M & L for making benching PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate with using liquid water proofing materials along the side wall adjoining to roofs in CONCAVE SHAPE complete. Note:- Liquid WP material will be measured and paid for separately. |
| 171 | M & L for preparation of new surfaces of corrugated CGI/RMP sheet ( top surface of hanger roof) any description not otherwise described over 10 cm width or girth & applying two coats of synthetic enamel paint ( first quality) in different coloured ( as directed) in comoflage pattern ( disruptive pattern) complete all as specified. |
| 172 | Taking down carefully existing unserviceable copper / aluminum point wiring(light, fan, socket) complete including removal of unserviceable fittings such as switches, switch-sockets, ceiling roses, light fittings etc including concealed conduit and sunken boxes and removing the retrieved materials from site including making good the disturbed surface of walls, floors, ceilings etc to match with the adjoining work complete all as specified and directed. |
| 173 | M & L for point wiring with multi stranded copper conductor FRLSH cable, 1100 volts grade PVC insulated and unsheathed of size 1.5 Sqmm single core in and includingPVC concealed conduit and including new MS sunken box and 3 mm thick bakelite laminated sheet top cover for one ceiling fan / exhaust fan / light controlled by one switch including provision of 1.5 Sqmm PVC insulated unsheathed with single core, multi stranded copper conductor FRLSH cable as earth wire to common earth & connecting to earth dolly all as specified and directed. |
| 174 | All as per item No 173 here in before but for socket outlet 3/5 pin, 6 Amp with 1.5 sqmm size on same boardcomplete all as specified. |
| 175 | All as per item No 173 here in before but for socket outlet 5 pin, 5 Amp on independent board but not below the switch board complete all as specified . |
| 176 | All as per item No 173 here in before but for socket outlet 3/5 pin, 15 Amp with 2.5 sqmm size on on independent board complete all as specified. |
| 177 | All as per item No 173 here in before but one light point controlled by two way switchcomplete all as specified. |
| 178 | All as per ser item No. 173 above but point wiring complete with 1.5 sqmm (nominal area) PVC insulated and unsheathed multi standard copper conductor FRLSH cable (ISI Marked) in and including PVC concealed conduit 20 mm dia ( medium quality ISI marked) and conduit fittings including chases cutting and making good disturbed surface complete all as specified. |
| 179 | All as per item No 178 here in before but for socket outlet 5 pin, 6 Amp on same boardcomplete all as specified. |
| 180 | All as per item No 178 here in before but for socket outlet 5 pin, 5 Amp on independent board but not below the switch board complete all as specified . |
| 181 | All as per item No 178 here in before but for socket outlet 5/15 pin, 15 Amp multi purpose, 2 in 1 on independent board with 2.5 Sqmm cable complete all as specified. |
| 182 | All as per item No 178 here in before but one bell/ buzzer point controlled by one push btton switch with cable 1.5 sqmm complete all as specified. |
| 183 | S &Fswitch piano flush type with frame cover 5 Amp 230V AC one way complete as specified. |
| 184 | S &Fswitch piano flush type with frame cover 5 Amp 230V AC two way, single pole complete as specified. |
| 185 | S &F socket out let 2 in 1, 3 pin 5 Amps flush type complete as specified. |
| 186 | S &F socket out let 2 in 1, 3 pin 5/15 Amps flush type complete as specified. |
| 187 | S &Fswitch piano flush type one way 15 Amps complete as specified. |
| 188 | S &Fswitch bell push flush type one way 5 Amps complete as specified. |
| 189 | M & L for replacement of Bell AC 230 Volts single pole Ding Dong. |
| 190 | S & F batten holder 2 Amp 250 volt AC with skrit ISI marked top line series, Polycarbonate cased body of brass with bck plate suitabel for batten fitting including of LED bulb 9/10 watt B22 base,6000K complete all as specified. |
| 191 | S&F, in replacement fan regulator electronic step type (1-5), socket type 230-240 Volt, AC supply, complete all as specified and directed. |
| 192 | S & Fceiling rose, 3 plate, surface bakelite type, Polycorbonate body, 6 Amps, 250 Volts AC, 65 x 50 mm, three terminal (ISI marked) complete all as specified. |
| 193 | S & F heavy duty Exhaust fan 300mm sweep single phase 230V, 50 Hz, 900 RPM complete with louvers and making hole for proper fitting of exhaust fan and louvers including suitable size copper conductor flexible twister cable for ceiling rose to fan complete. |
| 194 | Taking down old serviceable / unserviceable ceiling fan 1200 / 1400 mm sweep, 230 volts, AC, single phase, dismantling the ceiling fan and taking out complete rewinding (if unserviceable) for replacement of super enamelled copper winding wire of existing gauge and size including thoroughly cleaning all the components of fan, oiling and varnishing the fan with and including replacement of rusted bolts/nuts/split pin, rubber reel, flexible twin core cable of size 23/0/0.00076approx one metre long for each fan, machine screws and painting the fan and writing MES No. on fan and re-fixing the fan all as directed. |
| 195 | M&L for sub main wiring with 2 single core cable 4 sqmm, 1100 volts grade PVC insulated unsheathed of copper multi standard conductor FRLSH cable with continuous copper earth conductor of size 4 sqmm, 1100 volts grade drawing through in & including existing PVC concealed / surface conduit of size 20 mm including taking down old unserviceable sub main wiring complete all as specified. Note :- Two runs of cable and one run of earth wire shall be measured as one unit. |
| 196 | M&L for sub main wiring with 2 single core cable 4 sqmm, 1100 volts grade PVC insulated unsheathed of copper multi standard conductor FRLSH cable with continuous copper earth conductor of size 4 sqmm, 1100 volts grade drawing through in existing PVC concealed / surface conduit of size 20 mm including taking down old unserviceable sub main wiring complete all as specified. Note :- Two runs of cable and one run of earth wire shall be measured as one unit. |
| 197 | M&L for wiring complete with 2x6 Sqmm (nominal area) PVC insulated copper conductor FRLSH cable (ISI marked) in existing PVC concealed conduit ( medium quality ISI mared ) and cutting of chases in wall including 6 sqmm single core copper earth wire ot common earth and connecting to earth dolly complete all as specified. Make Anchor/ Havells/ HPL & Make of conduit Kalinga/ Finolex/ AKG (ISI marked) |
| 198 | M&L for wiring complete with 2x6 Sqmm (nominal area) PVC insulated copper conductor FRLSH cable (ISI marked) in existing PVC concealed conduit ( medium quality ISI mared ) and cutting of chases in wall including 6 sqmm single core copper earth wire ot common earth and connecting to earth dolly complete all as specified incl taking down old sub main wiring 4/6 sqmm. Make Anchor/ Havells/ HPL & Make of conduit Kalinga/ Finolex/ AKG (ISI marked) |
| 199 | M&L for wiring complete with 2x 2.5 Sqmm (nominal area) PVC insulated copper conductor FRLSH cable (ISI marked) in includingPVC concealed conduit ( medium quality ISI mared ) and cutting of chases in wall including 2.5 sqmm single core copper earth wire ot common earth and connecting to earth dolly complete all as specified incl taking down old sub main wiring 2.5 sqmm. Make Anchor/ Havells/ HPL & Make of conduit Kalinga/ Finolex/ AKG (ISI marked) |
| 200 | M&L for wiring complete with 4x6 Sqmm (nominal area) PVC insulated copper conductor FRLSH cable (ISI marked) inincludingPVC concealed conduit ( medium quality ISI mared ) and cutting of chases in wall including 6 sqmm single core copper earth wire ot common earth and connecting to earth dolly complete all as specified incl taking down old sub main wiring 4/6 sqmm. Make Anchor/ Havells/ HPL & Make of conduit Kalinga/ Finolex/ AKG (ISI marked) |
| 201 | S & F wall mounted LED batten fitting 1 x 20 watt, 6000 K min 100 lumen per watt, 4 ft complete with decorative ultra slim square profile liner LED lighting fixture with extruded polycarbonate environment friendly , energy efficient complete with all light fittings connections all as specified and directed . Make Surya/ CG/ Philips/ Bajaj |
| 202 | S & F 1 x 25 watt LED 5000 K complete with electronic drivers IP-65 with provn of suitable size GI bracket ( 01 No) and MS clamps ( 02 Nos) fixed to wall/ coloum including lamp and electrical connection providing 1.5 mtr long twin core round copper conductor cable of suitable size incl taking out old unserviceable complete. |
| 203 | S & F recessed / suspended LED ceiling light with wide light window for maximized glare free output suitable for 300 x 1200 mm and suspended fitting with separate electronic driver and high brightness LEDs 36 watt ( 100 lumens per watt) not less than 5700 K including connecting electric connection, complete all as specified. |
| 204 | S & F IP-65 flood light with high power LED 150 watt 6000 K complete fitting incl taking down old unsv light fitting complete all as specified and directed.Make Crompton Cat part No. LFLN-151-CDL/60 or equivalent in Bajaj/ Havells. |
| 205 | M & L for LED aviation lights luminaries fitting complete fitted at the hanger roof with provn of twin core copper cable 23/0.0076 mm in steel PVC conduit after provn necessary clamps incl taking down unserviceable obstruction lights. Make Bajaj Cat part No. BGAV 302 LED or equivalent / CG/Philips. |
| 206 | S & F in repair of mirror sleek LED light fitting 9 watt complete including making electrical connection complete all as specified Make CG/Bajaj/Philips/ Surya. |
| 207 | S & F single pole and neutral enclosure with two pin and earth plug and metal top complete with one single pole MCB 20 Amps. |
| 208 | S & F sheet metal enclosures double door made out of CRCA mild steel sheet, flush mounted, acrylic door, IP-43 protection, 4 way, DB TPN 415 Volts, with 200 Amp rated bus bar, dust and vermin proof suitable for fixing MCCBs , MCB"s and Isolators etc including taking down old unserviceable DB. |
| 209 | S & F sheet metal enclosures made out of CRCA mild steel sheet, Tempra plug & socket DBs for MCB, powder coated 415 Volts, dust and vermin proof suitable for incorporation of MCB and incl MCB FP 63 Amps incl taking down old unsv DBcomplete all as specified. |
| 210 | S & F sheet metal enclosures double door made out of CRCA mild steel sheet, concealed, surface mounting, acrylic door, IP-43 protection, 8 way, DB SPN 230 Volts, with 200 Amp rated bus bar, dust and vermin proof suitable for fixing MCB"s and Isolators etcincluding taking down old unserviceable DB complete all as specified. |
| 211 | S & F sheet metal enclosures double door made out of CRCA mild steel sheet, concealed, surface mounting, acrylic door, IP-43 protection, 4 way, DB SPN 230 Volts, with 200 Amp rated bus bar, dust and vermin proof suitable for fixing MCB"s and Isolators etcincluding taking down old unserviceable DB complete all as specified. |
| 212 | S & F sheet metal enclosures double door made out of CRCA mild steel sheet, concealed, surface mounting, acrylic door, IP-43 protection, 12 way, DB SPN 230 Volts, with 200 Amp rated bus bar, dust and vermin proof suitable for fixing MCB"s and Isolators etc including taking down old unserviceable DBcomplete all as specified. |
| 213 | S & F isolator /MCB SP 5 to 40 Amps, "C" curve , 240 Volts, 50 Hz, breaking capacity not less than 10 KA with over load and short circuit protection and including taking down old unserviceable isolator. |
| 214 | S & F isolator SPN 40 Amps, "C" curve , 240 Volts, 50 Hz, breaking capacity not less than 10 KA with over load and short circuit protection and including taking down old unserviceable isolator. |
| 215 | S & F isolator /MCB SPN 63 Amps, "C" curve , 240 Volts, 50 Hz, breaking capacity not less than 10 KA with over load and short circuit protection complete. |
| 216 | S & F isolator /MCB TPN 100 Amps, "C" curve , 240 Volts, 50 Hz, breaking capacity not less than 10 KA with over load and short circuit protection complete. |
| 217 | S & F MCB, TPN, 4 pole of rating 100 Amp Icu breaking capacity 16 KA thermal magnetic basedcomplete all as specified. |
| 218 | M & L for Aluminium strip 25 x 3.00 mm fixing over epoxy bus bar insulator/ saddles of suitable size and fixing screws for roof conductors and down conductors above ground complete. |
| 219 | S & F in repair of test point terminal block made of gun metal or phosphorous bronze of size 75 x 75 x 25 mm drilled and screwed including nuts , bolts and washers complete all as specified. |
| 220 | M & L for air termination, single pointed aluminium rod 12mm dia and 300 mm long with one end threaded. |
| 221 | Taking down fan sealing cable ends, dismantling blades and removing fan and blades to store and refixing the same after completing the repair work of the buildign and connector to fan complete all as specified. |
| 222 | S & F sleek pressure die cast aluminium housing, heat resistant glass, energy saving , IP-65 protection, better optics for uniform distribution street/ roadway laminar with high power LED 35 Watt complete fitting with driver, LED strip and all other accessories etc suitable for 40/32 mm OD entry for direct mounting on pipe bracket fixing on poles/ alongwith wall and including brackets made out of GI tubing light grade 40 mm dia , 2 mtr long bent to shape of 120 degree angle at half metre from bottom ( as per sample) fixing with MS clamp (02 Nos) and nut bolts, incl before fixing applying two coats of aluminium paint on bracket and clamp over a coat of red oxide primer. inclmaking electric connection with using twin core copper cable of suitable size incl taking down old unserviceable light fittings any type complete all as specified |
| 223 | M & L for earth continuity conductor or main earthing lead fixed to wall on batten or recessed or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing etc. or any other indicated situation as required by using 20 x 3.15 mm copper strip complete. |
| 224 | M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground to depth of pit not less than 2.25 m below normal ground level with top edge of the plate not less than 1.5 m below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal / coal dust and common salt filling in alternate layers and connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of GI or steel including GI protection pipe 15mm dia light grade upto the extent of 7.5 metre and connecting to earthing test point, main switch board including GI pipe 20 mm dia light grade for watering, MS funnel and bringing out the watering pipe upto 30 cm above the normal ground level plugged at top including all fitting including PCC earth pit with PCC 1:2:4 type B-1 using 20mm graded stone aggregate and RCC pit cover including necessary earthwork and excavation in any type of soil complete all as specified as shown in electrical plate No 3 of SSR Part-I and testing on completion. Note :- (a) PCC chamber shall be constructed at least 1.5 m away from earth pit. Pipe for watering shall be provided in slanting manner. (b) 4mm dia GI wire and 15mm dia light grade GI protection pipe upto 7.5 metre shall deemed to be included in quoted rate. |
| 225 | All as per ser item No. 224 here in before but earthing with GI strip 25 x 4 mm complete. |
| 226 | M&L in replacement for earthing complete with copper plate electrode of size 60cmx60cmx3 mm buried directly in ground, vertically to depth not less than 2.25mtr below normal ground level with top edge of the earth plate at depth not less than 1.5 metre below ground level surrounded from all sides with alternate layers of charcoal and common salt and connected to copper strip of size 20x3 mm by means of GI bolts, nuts washers & check nuts electrode connected to main switch board or main control board or on poles or on transformer and GI pipe medium grade 20mm bore for watering, 32mm bore GI pipe medium grade for protection of GI strip upto test point including providing funnel and wire mesh GI frame and 10cm thick suitably reinforced RCC pit cover, PCC chamber pit with PCC (1:3:6) type C2 using 40mm graded stone aggregates complete including excavation and earth work in any type of strata, disposal of surplus soil to a distance not exceeding 50 mtr, all as specified ans shown in Electrical plate No. 3 of SSR Part-1. Note :- (a) PCC chamber shall be constructed at least 1.5 m away from earth pit. Pipe for watering shall be provided in slanting manner. |
| 227 | Supply and laying GI tubing, light grade, 15mm bore complete with all fittings for cable and earth continuity strip protection laid in trenches/fixed to poles/along wall/under road/across the drain complete including taking down old pipe of any size/type. |
| 228 | M & L for earth continuity conductor or main earthing lead fixed to wall on batten or recessed or chases or buried in ground or drawn in conduit/ pipe for loop earthing etc. or any other indicated situation as required by using 4 mm dia GI earth lead wire complete. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
