Various Civil Works In Govt. Polytechnic College Bikaner-2 Dismantling Old Plaster Or Skirting, Raking Out Joints And Cleaning The Surface For Plaster Including Disposal Of Rubbish To The Dumping Ground Within 50 Meter Lead. 3 Dismantling Stone Slab / , Bikaner-Rajasthan

Various Civil Works In Govt. Polytechnic College Bikaner-2 Dismantling Old Plaster Or Skirting, Raking Out Joints And Cleaning The Surface For Plaster Including Disposal Of Rubbish To The Dumping Ground Within 50 Meter Lead. 3 Dismantling Stone Slab / Terrazzo Chip Flooring Laid In Cement Mortar Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Meters Lead. 4 Brick Work With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Upto Floor Five Level In All Shapes And Sizes In : Cement Mortar 1 : 6 ( 1 Cement : 6 Coarse Sand ) .Cement Mortar 1 : 6 ( 1 Cement : 6 Coarse Sand ) . 5 Providing And Laying Cement Concrete Including Curing, Compaction Etc. Complete In Retaining Walls, Return Walls, Walls ( Any Thickness ) Including Attached Pilasters, Columns, Piers, Abutments, Pillars, Posts, Struts, Buttresses, String Or Lacing Courses, Parapets, Coping, Bed Blocks, Anchor Blocks, Plain Window Sills, Fillets, Levelling Course Etc Upto Floor Five Level Excluding The Cost Of Centering And Shuttering. M15 Grade Nominal Mix 1: 2: 4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) . 6 Providing And Fixing 50 Mm Thick Cement Concrete Flooring With Metallic Concrete Hardener Topping, Under Layer Of 38 Mm Thick Cement Concrete 1:2:4 ( 1-Cement : 2-Coarse Sand : 4-Graded Stone Aggregate 20 Mm Thick Nominal Size ) And Top Layer Of 12 Mm Thick Metallic Concrete Hardener Consisting Of Mix 1:2 ( 1 Cement : 2 Stone Aggregate, 6 Mm Nominal Size ) By Volume & Mixed With Metallic Hardening Compound Of Approved Quality @ 2 Kg. / Sqm Including Cement Slurry, Rounding Off Edges Etc. But Excluding The Cost Of Nosing Of Step Etc. Complete. 7 Plaster On New Surface On Walls In Cement Sand Mortar 1:6 Including Racking Of Joint Etc. Complete Fine Finish : 20Mm Thick. 8 Providing And Laying Water Proofing Treatment On Roofs Of Slabs By Applying Cement Slurry Mixed With Water Proofing Cement Compound Consisting Of Applying :A ) After Surface Preparation, First Layer Of Slurry Of Cement @ 0.488 Kg / Sqm Mixed With Water Proofing Cement Compound @ 0.253 Kg / Sqm.B ) Laying Second Layer Of Fiber Glass Cloth When The First Layer Is Still Green. Overlaps Of Joints Of Fiber Cloth Should Not Be Less Than 10 Cm.C ) Third Layer Of 1.5 Mm Thickness Consisting Of Slurry Of Cement @ 1.289 Kg / Sqm Mixed With Water Proofing Cement Compound @ 0.670 Kg / Sqm And Coarse Sand @ 1.289 Kg / Sqm. This Will Be Allowed To Air Cure For 4 Hours Followed By Water Curing For 48 Hours. The Entire Treatment Will Be Taken Upto 30 Cm On Parapet Wall And Tucked Into Groove In Parapet All Around.D ) Fourth And Final Layer Of Brick Tiling ‘With Cement Mortar Or Any Other Approved Protective Coarse. ( Which Will Be Paid For Separately ) For The Purpose Of Measurement The Entire Treated Surface Will Be Measured. 9 Supplying And Fixing In Walls Machine Cut And Polished Stone Shelves, Tands And In Cm 1:3 With Machine Cut Edges : Sand Or Other Approved Stone 50 Mm Thick. 10 Providing And Fixing Steel Gate, Grating, And Grills Made Of Angles, Tees, Square Bars, Flats, Or Black Pipe With Holdfast And Fittings Complete As Per Design And Drawing Including Cutting, Welding And Fabrication With Priming Coat Of Red Oxide : 11 P & F G.I. Pipes With G.I. Fittings Excluding Union ( Is : 1239 Mark ) Including Trenching & Refilling Earth Etc. :- ( External Work ) Medium Duty Pipes : 50 Mm Dia Nominal Bore. 12 Providing And Laying Cement Concrete Including Curing, Compaction Etc. Complete In Retaining Walls, Return Walls, Walls ( Any Thickness ) Including Attached Pilasters, Columns, Piers, Abutments, Pillars, Posts, Struts, Buttresses, String Or Lacing Courses, Parapets, Coping, Bed Blocks, Anchor Blocks, Plain Window Sills, Fillets, Levelling Course Etc Upto Floor Five Level Excluding The Cost Of Centering And Shuttering. M15 Grade Nominal Mix1: 2: 4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 40 Mm Nominal Size ) . 13 Kota Stone Slab Flooring 25 Mm Thick Over 20 Mm ( Average ) Thick Base Laid Over And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Complete With Base Of Cement Mortar 1 : 4 ( 1 Cement : 4 Coarse Sand ) : For Area Of Each Slab From 2001 To 5000 Sq. Cm. Add Extra For Combined Flooring Kota Stone & Marble Flooring : For Marble Flooring Area Upto 20%. 14 Part B : Smart Class Room Of Civil Department 15 Dismantling Stone Slab / Terrazzo Chip Flooring Laid In Cement Mortar Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Meters Lead. 16 Demolishing Brick Work Manually / By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge : In Cement Mortar. 17 Brick Work With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Upto Floor Five Level In All Shapes And Sizes In : Cement Mortar 1 : 6 ( 1 Cement : 6 Coarse Sand ) .Cement Mortar 1 : 6 ( 1 Cement : 6 Coarse Sand ) . 18 Providing And Laying Cement Concrete Including Curing, Compaction Etc. Complete In Retaining Walls, Return Walls, Walls ( Any Thickness ) Including Attached Pilasters, Columns, Piers, Abutments, Pillars, Posts, Struts, Buttresses, String Or Lacing Courses, Parapets, Coping, Bed Blocks, Anchor Blocks, Plain Window Sills, Fillets, Levelling Course Etc Upto Floor Five Level Excluding The Cost Of Centering And Shuttering. M15 Grade Nominal Mix 1: 2: 4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) . 19 Plaster On New Surface On Walls In Cement Sand Mortar 1:6 Including Racking Of Joint Etc. Complete Fine Finish : 20Mm Thick. 20 Removing Dry Or Oil Bound Distemper By Scrapping Sand Papering And Preparing Surface Smooth Including Necessary Repairs To Scratches By Sandal / Loi And All Scaffolding. ( For Colour Changing Only ) . 21 6 Mm Thick Cement Plaster To Ceiling Of Mix 1:3 ( 1 Cement : 3 Fine Sand ) . 22 Providing And Fixing 12.5 Mm Thick Tapered Edge Gypsum Board Conforming To Is 2095- Part I At All Height False Ceiling Including Providing And Fixing Of Frame Work Made Of Special Sections Power Pressed From M.S. Sheet And Galvanised In Accordance With Zinc Coating Of Grade 350 As Per Is : 277 And Consisting Of Angle Cleats Of Size 25 Mm Wide × 1.6 Mm Thick With Flanges Of 22 Mm And 37 Mm At 1200 Mm Centre To Centre One Flange Fixed To The Ceiling With Dash Fastener 12.5 Mm Dia × 40 Mm Long With 6Mm Dia Bolts To The Angle Hangers Of 25×25×0.55 Mm Of Required Length, And Other End Of Angle Hanger Being Fixed With Nut And Bolts To G.I. Channels 45×15×0.9 Mm Running At The Rate Of 1200 Mm Centre To Centre To Which The Ceiling Section 0.5 Mm Thick Bottom Wedge Of 80 Mm With Tapered Flanges Of 26 Mm Each Having Clips Of 10.5 Mm At 450 Mm Centre To Centre Shall Be Fixed In A Direction Perpendicular To G.I. Channel With Connecting Clips Made Out Of 2.64 Mm Dia × 230 Mm Long G.I. Wire At Every Junction Including Fixing The Gypsum Board With Ceiling Section And Perimeter Channels 0.5 Mm Thick 27 Mm High Having Flanges Of 20 Mm And 30 Mm Long, The Perimeter Of Ceiling Fixed To Wall / Partition With The Help Of Rawl Plugs At 450 Mm Centre To Centre With 25 Mm Long Drive-All Screws @ 230 Mm Interval Including Jointing And Fixing To A Flush Finish Of Tapered And Square Edges Of The Board With Recommended Filler, Jointing Tapes, Finisher And Two Coats Of Primer Suitable For Board As Per Manufactures Specification And Also Including The Cost Of Making Openings For Light Fittings, Grills, Diffusers, Cutouts Made With Frame Of Perimeter Channels Suitably Fixed All Complete As Per Drawing And Specification And Direction Of The Engineer-In-Charge But Excluding The Cost Of Painting. 23 Dismantling Doors, Windows And Clearstory Windows Steel Or Wood Shutter Including Chowkhats And Holdfasts Etc. Complete And Stacking Within 50 Meters Lead : Of Area 3 Square Meter And Below. 24 Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partition With Extruded Built Up Standard Tubular / Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is:733 And Is:1285, Fixed With Rawl Plugs And Screws Or With Fixing Clips, Or With Expansion Hold Fasteners Including Necessary Filling Up Of Gap. At Junctions, At Top, Bottom And Sides With Required Pvc / Neoprene Felt Etc. Aluminium Section Shall Be Smooth, Rust Free, Straight, Mitered And Jointed Mechanically Wherever Required Including Cleat Angle Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws Al. Tower Bolt & Al. Handle & Al. Aldrop Etc., All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. ( Glazing And Paneling To Be Paid For Separately ) . 25 For Fixed Portion : Polyester Powder Coating Aluminium ( Minimum Thickness Of Powder Coating 50 Micron ) . 26 For Shutters Builtup Standard Tubular Sections Of Openable Doors, Windows & Ventilators Including Providing & Fixing Hinges / Rollers Etc. And Making Provision For Fixing Of Fittings Wherever Required ( Lockes Shall Be Paid For Separately ) : Polyester Powder Coating Aluminium ( Minimum Thickness Of Powder Coating 50 Micron ) . 27 Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Pvs / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge. ( Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item. ) : With Float Glass Panes Of 5.0 Mm Thickness ( Weight Not Less Than 13.50 Kg / Sqm. ) . 28 Providing And Fixing Expanded Grill Made Of Aluminium As Per Design And Drawing Having Members Section Of Size 7.5 Mm × 6.0 Mm And Opening Of Size 102 Mm × 99 Mm To Aluminium Window / Vent With Required Screws, Y And H Aluminium Sec ( As Per Drawing ) At The Ends And Middle Joints Respectively Complete In All Respect As Per Direction Of Engineer-In-Charge : Polyester Powder Coating Aluminium ( Minimum Thickness Of Powder Coating 50 Micron ) . 29 Providing And Applying White Cement Based Putty Over Plastered Surface To Prepare The Surface Even And Smooth Complete. 30 Wall Painting With Plastic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade Including All Scaffolding : New Work ( Two Or More Coats ) Including Preparation Of Base With Primer, Putty, Lippy Etc. Complete In All Respect. 31 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade : Two Or More Coats On New Work 32 Providing And Fixing External Grade Board Solid Core Single / Double Leaf Flush Door Shutters Is: 2202 ( Part-Ii ) 1996 Marked Using Phenol Formal Dehyderesin In Glue Both Sides With Approved Stainless Steel Fittings Complete As Per Annexure A : 35 Mm Thick : Commercial Veneer Both Side 33 P & F 1St Quality Stain Free Double Charge Vitrified Tiles On Floor, Skirting And Steps Etc. In Different Sizes ( Thickness To Be Specified By Manufacture ) With Water Absortion Less Than 0.08% And Conforming To Is 15622 Of Approved Make In All Colour And Shade, Laid With 20 Mm Thick Cm 1 : 4 Including Grounting The Joints With White Cement And Matching Pigment Etc. Complete : Size 600 Mm × 600 Mm. Deduct For Not Using 20 Mm Thick Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) Bedding In Laying Of Floor Tiles. 34 Add Extra For Fixing Glazed / Ceramic / Vitrified Floor Tiles With Cement Based High Polymer Modified Quick-Set Tile Adhesive ( Water Based ) Conforming To Is: 15477, Using 5 Kg. Adhesive Per Sum Of Tile Area, In Average 3 Mm Thickness Instead Of Cement Mortar 35 Providing And Fixing T-Iron Frames For Doors, Windows And Ventilators Of Mild Steel Tee-Sections, Joints Mitred And Welded With 15×3 Mm Lugs 10 Cm Long Embedded In Cement Concrete Blocks 15×10×10 Cm Of 1:3:6 ( 1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size ) Or With Wooden Plugs And Screws Or Rawl Plugs And Screws Or With Fixing Clips Or With Bolts And Nuts As Require Including Fixing Of Necessary Butt Hinges And Screws And Applying A Priming Coat Of Approved Steel Primer. 36 Providing And Laying Brick Kharanja On Roofs With Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) Mixed With 2% Integral Water Proofing Compound In Square Pattern : 75 Mm To 100 Mm Thick Average. 37 Providing And Fixing Steel Gate, Grating, And Grills Made Of Angles, Tees, Square Bars, Flats, Or Black Pipe With Holdfast And Fittings Complete As Per Design And Drawing Including Cutting, Welding And Fabrication With Priming Coat Of Red Oxide : 38 Providing & Fixing Fly Proof Wire Gauze To Windows, Clerestory Windows & Doors With M.S. Flat 15×3 Mm And Nuts & Bolts Complete. Galvanised M.S. Wire Gauze With 0.63 Mm Dia Wire And 1.4 Mmaperture On Both Sides. 39 Providing And Applying White Cement Based Putty Over Plastered Surface To Prepare The Surface Even And Smooth Complete. 40 Part C : Renovartion Of Physics Lab 41 Removing Dry Or Oil Bound Distemper By Scrapping Sand Papering And Preparing Surface Smooth Including Necessary Repairs To Scratches By Sandal / Loi And All Scaffolding. ( For Colour Changing Only ) . 42 6 Mm Thick Cement Plaster To Ceiling Of Mix 1:3 ( 1 Cement : 3 Fine Sand ) . 43 Repairs To Plaster Of Thickness 12 Mm To 20 Mm In Patches Of Area 2.5 Sq. Metres And Under Including Cutting The Patch In Proper Shape, Raking Out Joints And Preparing And Plastering The Surface Of The Walls Complete Including Disposal Of Rubbish To The Dumping Ground Within 50 M Lead : With Cement Mortar 1 :4 ( 1 Cement : 4 Coarse Sand ) . 44 Providing And Applying White Cement Based Putty Over Plastered Surface To Prepare The Surface Even And Smooth Complete. 45 Wall Painting With Plastic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade Including All Scaffolding : New Work ( Two Or More Coats ) Including Preparation Of Base With Primer, Putty, Lippy Etc. Complete In All Respect. 46 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade : Two Or More Coats On New Work 47 Providing And Fixing Steel Gate, Grating, And Grills Made Of Angles, Tees, Square Bars, Flats, Or Black Pipe With Holdfast And Fittings Complete As Per Design And Drawing Including Cutting, Welding And Fabrication With Priming Coat Of Red Oxide : 48 Providing & Fixing Fly Proof Wire Gauze To Windows, Clerestory Windows & Doors With M.S. Flat 15×3 Mm And Nuts & Bolts Complete. Galvanised M.S. Wire Gauze With 0.63 Mm Dia Wire And 1.4 Mmaperture On Both Sides. 49 Providing And Fixing Of Double Leaf Steel Shutter For Cupboard, The Frame Is Made Of Pressed Steel Isi Section 80×25 Mm ×1.25 Mm Thick With 1.00 Mm Ms Sheet To Spot Welded Including Holdfasts Of 15×3 Mm, Ms Oxidized Fittings Such As Butt Hinges, Sliding Doors Bolts, Handles, Tower Bolts And Twin Peg Etc Complete Including Applying Priming Coat Of Approved Steel Primer Of Red Oxide Zinc Chromate And Spray Painting In Approved Shade With Deco Paint Of Approved Quality Complete As Per Direction Of Engineer-In-Charge. 50 P & F 1St Quality Stain Free Double Charge Vitrified Tiles On Floor, Skirting And Steps Etc. In Different Sizes ( Thickness To Be Specified By Manufacture ) With Water Absortion Less Than 0.08% And Conforming To Is 15622 Of Approved Make In All Colour And Shade, Laid With 20 Mm Thick Cm 1 : 4 Including Grounting The Joints With White Cement And Matching Pigment Etc. Complete : Size 600 Mm × 600 Mm. Deduct For Not Using 20 Mm Thick Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) Bedding In Laying Of Floor Tiles. 51 Add Extra For Fixing Glazed / Ceramic / Vitrified Floor Tiles With Cement Based High Polymer Modified Quick-Set Tile Adhesive ( Water Based ) Conforming To Is: 15477, Using 5 Kg. Adhesive Per Sum Of Tile Area, In Average 3 Mm Thickness Instead Of Cement Mortar 52 P & F Wvc Wash Basin ( Ist Quality Is:2556 Mark ) Of Approved Make With C.I. Brackets Duly Painted 1 No. 15 Mm C.P. Pillar Cock ( Is:8934 Mark ) & 32 Mm C.P. Brass Waste Coupling Of Approved Make 32 Mm Waste Pipe Complete Including Cutting & Making Good The Wall : Size 580 Mm × 450 Mm. 53 P & F G.I. Pipes With G.I. Fittings Excluding Union ( Is : 1239 Mark ) Including Trenching & Refilling Earth Etc. :- ( External Work ) Medium Duty Pipes : 54 25 Mm Dia Nominal Bore. 55 20 Mm Dia Nominal Bore. 56 Brick Work With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 10.0 In Superstructure Above Plinth Level Upto Floor Five Level In All Shapes And Sizes In : Cement Mortar 1 : 6 ( 1 Cement : 6 Coarse Sand ) .Cement Mortar 1 : 6 ( 1 Cement : 6 Coarse Sand ) . 57 P & F Pillar Cocks ( Is : 8934 Mark ) Of Superior Quality And Approved Make : C.P. Pillar Cock, Swan-Neck With Casted Spout, 15 Mm Nominal Bore 58 Wall Painting With Plastic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade Including All Scaffolding : New Work ( Two Or More Coats ) Including Preparation Of Base With Primer, Putty, Lippy Etc. Complete In All Respect. 59 Part D : Renovartion Of Stage And Tennis Court 60 Earth Work In Excavation By Mechanical Means ( Hydraulic Excavator ) / Manual Means In Foundation Trenches Or Drains ( Not Exceeding 1.5 M In Width Or 10 Sum On Plan ) Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Taking Out The Excavated Soil And Depositing And Refilling Of Jhiri With Watering & Ramming And Disposal Of Surplus Excavated Soil As Directed With In A Lead Of 50 Meter. All Kinds Of Soils. 61 Providing And Laying In Position Cement Concrete Including Curing, Compaction Etc. Complete In Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Upto Plinth Level. 1: 4: 8 ( 1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size ) . 62 Brick Work With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 10.0 In Superstructure Above Plinth Level Upto Floor Five Level In All Shapes And Sizes In : Cement Mortar 1 : 6 ( 1 Cement : 6 Coarse Sand ) .Cement Mortar 1 : 6 ( 1 Cement : 6 Coarse Sand ) . 63 Filling Available Excavated Earth ( Excluding Rock ) In Trenches, Plinth Side Of Foundation Etc. In Layers Not Exceeding 20 Cm. In Depth, Consolidating Each Deposited Layer By Ramming And Watering Including Lead Upto 50 Meter And With All Lift. 64 Kota Stone Slab Flooring 25 Mm Thick Over 20 Mm ( Average ) Thick Base Laid Over And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Complete With Base Of Cement Mortar 1 : 4 ( 1 Cement : 4 Coarse Sand ) : For Area Of Each Slab From 2001 To 5000 Sq. Cm. Add Extra For Combined Flooring Kota Stone & Marble Flooring : For Marble Flooring Area Upto 20%. 65 Extra For Mirror Polishing On Terrazzo / Kota Stone Work Wherever Required To Give High Gloss Finish Complete. 66 Providing And Fixing Welded Mesh / Expanded Metal Mesh In Frame Work, Flat Iron Beading 20×3 Mm Including Top Cross Laps Inside And Out Sides Welding, Iron Bolts, Crews, Clips Etc. Complete ( Excluding Frame Work ) Of Size : Welded Mesh 25 Mm × 25 Mm × 2.1 Mm. 67 6 Mm Thick Cement Plaster To Ceiling Of Mix 1:3 ( 1 Cement : 3 Fine Sand ) . 68 Providing And Fixing Steel Gate, Grating, And Grills Made Of Angles, Tees, Square Bars, Flats, Or Black Pipe With Holdfast And Fittings Complete As Per Design And Drawing Including Cutting, Welding And Fabrication With Priming Coat Of Red Oxide : 69 Plaster On New Surface On Walls In Cement Sand Mortar 1:6 Including Racking Of Joint Etc. Complete Fine Finish : 20Mm Thick. 70 Providing And Applying White Cement Based Putty Over Plastered Surface To Prepare The Surface Even And Smooth Complete. 71 Wall Painting With Plastic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade Including All Scaffolding : New Work ( Two Or More Coats ) Including Preparation Of Base With Primer, Putty, Lippy Etc. Complete In All Respect. 72 Dismantling Old Plaster Or Skirting, Raking Out Joints And Cleaning The Surface For Plaster Including Disposal Of Rubbish To The Dumping Ground Within 50 Meter Lead. 73 Part E : Renovation And Repair Work Of Phe Lab 74 Dismantling Stone Slab / Terrazzo Chip Flooring Laid In Cement Mortar Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Meters Lead. 75 Demolishing Brick Work Manually / By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge : In Cement Mortar. 76 Brick Work With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 10.0 In Superstructure Above Plinth Level Upto Floor Five Level In All Shapes And Sizes In : Cement Mortar 1 : 6 ( 1 Cement : 6 Coarse Sand ) .Cement Mortar 1 : 6 ( 1 Cement : 6 Coarse Sand ) . 77 Removing Dry Or Oil Bound Distemper By Scrapping Sand Papering And Preparing Surface Smooth Including Necessary Repairs To Scratches By Sandal / Loi And All Scaffolding. ( For Colour Changing Only ) . 78 Plaster On New Surface On Walls In Cement Sand Mortar 1:6 Including Racking Of Joint Etc. Complete Fine Finish : 20Mm Thick. 79 6 Mm Thick Cement Plaster To Ceiling Of Mix 1:3 ( 1 Cement : 3 Fine Sand ) . 80 Providing And Fixing Stainless Steel A Isi 304 ( 18 / 8 ) Kitchen Sink & Is 13983 With C.I. Brackets And Stainless Steel Plug 40 Mm Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Required : Kitchen Sink With Drain Board Stainless Steel Kitchen Sink - With Drain Board 510×1040 Mm Bowl Depth 200 Mm. 81 P & F Wvc Wash Basin ( Ist Quality Is:2556 Mark ) Of Approved Make With C.I. Brackets Duly Painted 1 No. 15 Mm C.P. Pillar Cock ( Is:8934 Mark ) & 32 Mm C.P. Brass Waste Coupling Of Approved Make 32 Mm Waste Pipe Complete Including Cutting & Making Good The Wall : Size 580 Mm × 450 Mm. 82 P & F Pillar Cocks ( Is : 8934 Mark ) Of Superior Quality And Approved Make : C.P. Pillar Cock, Swan-Neck With Casted Spout, 15 Mm Nominal Bore 83 P & F 1St Quality Stain Free Double Charge Vitrified Tiles On Floor, Skirting And Steps Etc. In Different Sizes ( Thickness To Be Specified By Manufacture ) With Water Absortion Less Than 0.08% And Conforming To Is 15622 Of Approved Make In All Colour And Shade, Laid With 20 Mm Thick Cm 1 : 4 Including Grounting The Joints With White Cement And Matching Pigment Etc. Complete : Size 600 Mm × 600 Mm. Deduct For Not Using 20 Mm Thick Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) Bedding In Laying Of Floor Tiles. 84 Add Extra For Fixing Glazed / Ceramic / Vitrified Floor Tiles With Cement Based High Polymer Modified Quick-Set Tile Adhesive ( Water Based ) Conforming To Is: 15477, Using 5 Kg. Adhesive Per Sum Of Tile Area, In Average 3 Mm Thickness Instead Of Cement Mortar 85 Providing And Fixing Steel Gate, Grating, And Grills Made Of Angles, Tees, Square Bars, Flats, Or Black Pipe With Holdfast And Fittings Complete As Per Design And Drawing Including Cutting, Welding And Fabrication With Priming Coat Of Red Oxide : 86 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade : Two Or More Coats On New Work 87 Supplying And Fixing In Walls Machine Cut And Polished Stone Shelves, Tands And In Cm 1:3 With Machine Cut Edges : Sand Or Other Approved Stone 25 Mm Thick. 88 Half Brick Masonry With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 7.5 In Foundation & Plinth : Cement Mortar 1 : 6 ( 1 Cement : 6 Coarse Sand ) . 89 Providing And Fixing Granite Stone Slab Mirror Polished And Machine Edge Cut In Walls, Pillars, Steps, Shelves, Sills Counters, Floors Etc. Laid On 12 Mm ( Av. ) Thick Base Of Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) Jointing With White Cement Mortar 1:2 ( 1White Cement : 2 Marble Dust ) With Pigment To Match The Shade Of The Marble Slab Including Grinding, Rubbing And Polishing Complete. Black / South : Above 3601 Cm2 Slabs 90 Extra For Providing Edge Moulding To 15-18 Mm Thick Marble / Granite Stone Counters, Vanities Etc. Including Machine Polishing To Edge To Give High Gloss Finish Etc. Complete As Per Design Approved By Engineer-In-Charge Granite Work. 91 Repairs To Plaster Of Thickness 12 Mm To 20 Mm In Patches Of Area 2.5 Sq. Metres And Under Including Cutting The Patch In Proper Shape, Raking Out Joints And Preparing And Plastering The Surface Of The Walls Complete Including Disposal Of Rubbish To The Dumping Ground Within 50 M Lead : With Cement Mortar 1 :4 ( 1 Cement : 4 Coarse Sand ) .

INR 500 /-

Refer document

INR 15.80 Lakhs /-

Name of Work: Various Civil works in Govt. Polytechnic College Bikaner

Sl. No.	Item Description
1	Part A : Repair of Roof Tank
2	Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead.
3	Dismantling stone slab/ terrazzo chip flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead.
4	Brick work with common burnt clay F.P.S. (Non Modular) bricks of class designation 7.5 in superstructure above plinth level upto floor five level in all shapes and sizes in : Cement mortar 1 : 6 (1 cement : 6 coarse sand).Cement mortar 1 : 6 (1 cement : 6 coarse sand).
5	Providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc upto floor five level excluding the cost of centering and shuttering. M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
6	Providing and fixing 50 mm thick cement concrete flooring with Metallic concrete hardener topping, under layer of 38 mm thick cement concrete 1:2:4 (1-cement : 2-coarse sand : 4-graded stone aggregate 20 mm thick nominal size) and top layer of 12 mm thick metallic concrete hardener consisting of mix 1:2 (1 cement : 2 stone aggregate, 6 mm nominal size) by volume & mixed with metallic hardening compound of approved quality @ 2 Kg./Sqm including cement slurry, rounding off edges etc. but excluding the cost of nosing of step etc. complete.
7	Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 20mm thick.
8	Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. b) laying second layer of fiber glass cloth when the first layer is still green. Overlaps of joints of fiber cloth should not be less than 10 cm. c) Third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tiling ‘with cement mortar or any other approved protective coarse. (which will be paid for separately) For the purpose of measurement the entire treated surface will be measured.
9	Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges : Sand or other approved stone 50 mm thick.
10	Providing and fixing steel gate, grating, and grills made of angles, tees, square bars, flats, or black pipe with holdfast and fittings complete as per design and drawing including cutting, welding and fabrication with priming coat of red oxide :
11	P & F G.I. Pipes with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc. :- (External Work) Medium Duty Pipes : 50 mm dia nominal bore.
12	Providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc upto floor five level excluding the cost of centering and shuttering. M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size).
13	Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : For area of each slab from 2001 to 5000 Sq. Cm. Add Extra for Combined Flooring Kota Stone & Marble Flooring : For marble Flooring area upto 20%.
14	Part B : Smart Class Room of Civil Department
15	Dismantling stone slab/ terrazzo chip flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead.
16	Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge : In cement mortar.
17	Brick work with common burnt clay F.P.S. (Non Modular) bricks of class designation 7.5 in superstructure above plinth level upto floor five level in all shapes and sizes in : Cement mortar 1 : 6 (1 cement : 6 coarse sand).Cement mortar 1 : 6 (1 cement : 6 coarse sand).
18	Providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc upto floor five level excluding the cost of centering and shuttering. M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
19	Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 20mm thick.
20	Removing dry or oil bound distemper by scrapping sand papering and preparing surface smooth including necessary repairs to scratches by sandal/loi and all scaffolding. (for colour changing only).
21	6 mm thick cement plaster to ceiling of mix 1:3 (1 cement : 3 fine sand).
22	Providing and fixing 12.5 mm thick tapered edge gypsum board conforming to IS 2095- Part I at all height false ceiling including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size 25 mm wide × 1.6 mm thick with flanges of 22 mm and 37 mm at 1200 mm centre to centre one flange fixed to the ceiling with dash fastener 12.5 mm dia × 40 mm long with 6mm dia bolts to the angle hangers of 25×25×0.55 mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45×15×0.9 mm running at the rate of 1200 mm centre to centre to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450 mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64 mm dia × 230 mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre with 25 mm long drive-all screws @ 230 mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting.
23	Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead : Of area 3 square meter and below.
24	Providing and fixing aluminium work for doors, windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gap. at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling, C.P. brass / stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc., all complete as per architectural drawings and the directions of Engineer-in-Charge. (Glazing and paneling to be paid for separately).
25	For fixed portion : Polyester Powder coating aluminium (minimum thickness of powder coating 50 micron).
26	For shutters builtup standard tubular sections of openable doors, windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately) : Polyester Powder coating aluminium (minimum thickness of powder coating 50 micron).
27	Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-Charge. (Cost of aluminium snap beading shall be paid in basic item.) : With float glass panes of 5.0 mm thickness (weight not less than 13.50 kg/sqm.).
28	Providing and fixing expanded grill made of aluminium as per design and drawing having members section of size 7.5 mm × 6.0 mm and opening of size 102 mm × 99 mm to aluminium window/vent with required screws, Y and H aluminium sec (as per drawing) at the ends and middle joints respectively complete in all respect as per direction of Engineer-in-Charge : Polyester Powder coating aluminium (minimum thickness of powder coating 50 micron).
29	Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete.
30	Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding : New work (Two or more coats) including preparation of base with primer, putty, lippy etc. complete in all respect.
31	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on New Work
32	Providing and fixing external grade board solid core single/ Double leaf flush door shutters IS: 2202 (Part-II)1996 marked using Phenol formal dehyderesin in glue both sides with approved stainless steel fittings complete as per annexure "A" : 35 mm thick : Commercial Veneer both side
33	P & F 1st quality Stain Free double charge Vitrified tiles on floor, skirting and steps etc. in different sizes (thickness to be specified by manufacture) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc. complete : size 600 mm × 600 mm. Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles.
34	Add extra for Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, using 5 kg. adhesive per sum of tile area, in average 3 mm thickness instead of cement mortar
35	Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15×3 mm lugs 10 cm long embedded in cement concrete blocks 15×10×10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
36	Providing and laying brick kharanja on roofs with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound in square pattern : 75 mm to 100 mm thick average.
37	Providing and fixing steel gate, grating, and grills made of angles, tees, square bars, flats, or black pipe with holdfast and fittings complete as per design and drawing including cutting, welding and fabrication with priming coat of red oxide :
38	Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15×3 mm and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mmaperture on both sides.
39	Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete.
40	Part C : Renovartion of Physics Lab
41	Removing dry or oil bound distemper by scrapping sand papering and preparing surface smooth including necessary repairs to scratches by sandal/loi and all scaffolding. (for colour changing only).
42	6 mm thick cement plaster to ceiling of mix 1:3 (1 cement : 3 fine sand).
43	Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead : With cement mortar 1 :4 (1 cement : 4 coarse sand).
44	Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete.
45	Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding : New work (Two or more coats) including preparation of base with primer, putty, lippy etc. complete in all respect.
46	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on New Work
47	Providing and fixing steel gate, grating, and grills made of angles, tees, square bars, flats, or black pipe with holdfast and fittings complete as per design and drawing including cutting, welding and fabrication with priming coat of red oxide :
48	Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15×3 mm and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mmaperture on both sides.
49	Providing and fixing of double leaf steel shutter for cupboard, the frame is made of pressed steel ISI section 80×25 mm ×1.25 mm thick with 1.00 mm MS sheet to spot welded including holdfasts of 15×3 mm, MS oxidized fittings such as butt hinges, sliding doors bolts, handles, tower bolts and twin peg etc complete including applying priming coat of approved steel primer of red oxide zinc chromate and spray painting in approved shade with deco paint of approved quality complete as per direction of Engineer-in-Charge.
50	P & F 1st quality Stain Free double charge Vitrified tiles on floor, skirting and steps etc. in different sizes (thickness to be specified by manufacture) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc. complete : size 600 mm × 600 mm. Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles.
51	Add extra for Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, using 5 kg. adhesive per sum of tile area, in average 3 mm thickness instead of cement mortar
52	P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make 32 mm waste pipe complete including cutting & making good the wall : Size 580 mm × 450 mm.
53	P & F G.I. Pipes with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc. :- (External Work) Medium Duty Pipes :
54	25 mm dia nominal bore.
55	20 mm dia nominal bore.
56	Brick work with common burnt clay F.P.S. (Non Modular) bricks of class designation 10.0 in superstructure above plinth level upto floor five level in all shapes and sizes in : Cement mortar 1 : 6 (1 cement : 6 coarse sand).Cement mortar 1 : 6 (1 cement : 6 coarse sand).
57	P & F Pillar Cocks (IS : 8934 Mark) of superior quality and approved make : C.P. Pillar cock, Swan-neck with casted spout, 15 mm nominal bore
58	Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding : New work (Two or more coats) including preparation of base with primer, putty, lippy etc. complete in all respect.
59	Part D : Renovartion of Stage and Tennis Court
60	Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils.
61	Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work upto plinth level. 1: 4: 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).
62	Brick work with common burnt clay F.P.S. (Non Modular) bricks of class designation 10.0 in superstructure above plinth level upto floor five level in all shapes and sizes in : Cement mortar 1 : 6 (1 cement : 6 coarse sand).Cement mortar 1 : 6 (1 cement : 6 coarse sand).
63	Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead upto 50 meter and with all lift.
64	Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : For area of each slab from 2001 to 5000 Sq. Cm. Add Extra for Combined Flooring Kota Stone & Marble Flooring : For marble Flooring area upto 20%.
65	Extra for Mirror polishing on terrazzo/Kota stone work wherever required to give high gloss finish complete.
66	Providing and fixing welded mesh/expanded metal mesh in frame work, flat iron beading 20×3 mm including top cross laps inside and out sides welding, iron bolts, crews, clips etc. complete (excluding frame work) of size : Welded mesh 25 mm × 25 mm × 2.1 mm.
67	6 mm thick cement plaster to ceiling of mix 1:3 (1 cement : 3 fine sand).
68	Providing and fixing steel gate, grating, and grills made of angles, tees, square bars, flats, or black pipe with holdfast and fittings complete as per design and drawing including cutting, welding and fabrication with priming coat of red oxide :
69	Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 20mm thick.
70	Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete.
71	Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding : New work (Two or more coats) including preparation of base with primer, putty, lippy etc. complete in all respect.
72	Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead.
73	Part E : Renovation and Repair work of PHE Lab
74	Dismantling stone slab/ terrazzo chip flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead.
75	Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge : In cement mortar.
76	Brick work with common burnt clay F.P.S. (Non Modular) bricks of class designation 10.0 in superstructure above plinth level upto floor five level in all shapes and sizes in : Cement mortar 1 : 6 (1 cement : 6 coarse sand).Cement mortar 1 : 6 (1 cement : 6 coarse sand).
77	Removing dry or oil bound distemper by scrapping sand papering and preparing surface smooth including necessary repairs to scratches by sandal/loi and all scaffolding. (for colour changing only).
78	Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 20mm thick.
79	6 mm thick cement plaster to ceiling of mix 1:3 (1 cement : 3 fine sand).
80	Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink & IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board Stainless steel kitchen sink - with drain board 510×1040 mm bowl depth 200 mm.
81	P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make 32 mm waste pipe complete including cutting & making good the wall : Size 580 mm × 450 mm.
82	P & F Pillar Cocks (IS : 8934 Mark) of superior quality and approved make : C.P. Pillar cock, Swan-neck with casted spout, 15 mm nominal bore
83	P & F 1st quality Stain Free double charge Vitrified tiles on floor, skirting and steps etc. in different sizes (thickness to be specified by manufacture) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc. complete : size 600 mm × 600 mm. Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles.
84	Add extra for Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, using 5 kg. adhesive per sum of tile area, in average 3 mm thickness instead of cement mortar
85	Providing and fixing steel gate, grating, and grills made of angles, tees, square bars, flats, or black pipe with holdfast and fittings complete as per design and drawing including cutting, welding and fabrication with priming coat of red oxide :
86	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on New Work
87	Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges : Sand or other approved stone 25 mm thick.
88	Half brick masonry with common burnt clay F.P.S. (Non Modular) bricks of class designation 7.5 in foundation & plinth : Cement mortar 1 : 6 (1 cement : 6 coarse sand).
89	Providing and fixing Granite stone slab mirror polished and machine edge cut in Walls, Pillars, Steps, Shelves, Sills Counters, Floors etc. laid on 12 mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Black/South : Above 3601 Cm2 Slabs
90	Extra for providing edge moulding to 15-18 mm thick marble/Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge Granite work.
91	Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead : With cement mortar 1 :4 (1 cement : 4 coarse sand).