Military Engineer Services-MES has published Certain Repair To Flooring Tiling Plumbing And Sanitary Fittings At Zone Ii And Iii At Lansdowne Under Lansdowne Certain Repair To Flooring Tiling Plumbing And Sanitary Fittings At Zone Ii And Iii At Lansdowne Under Lansdowne. Submission Date for this Tender is 13-09-2021. Plumbing and Sanitary Work Tenders in AGE I Lansdowne Uttarakhand. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 06-Sep-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 13-09-2021 |
| Sl. No. | Item Description |
| 1 | Dismantlingfloor hearth or wall tiling including cement mortar bedding (but not backing), removingand rubbish off the premises from MoD land complete all as specified and directed. |
| 2 | Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness(below or above ground level ) and removing unserviceable material,outside of A 1 defence land complete all as specified and directed. |
| 3 | M&L for 75 mm thick Cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base to floors finished fair and even complete all as specified and directed. |
| 4 | M&L for coloured glazed ceramic tiles of any design and pattern, 300x450x 7 to 8 mmthick, as in dado etc incl 10 mm thick rendering in CM 1:4, Set and jointed in neat cement slurry and pointed in white of coloured cement to match the shade of the tiles. Tiles shall be confirming to IS-15622:2017, Group B III with average water absorption between 10% to 15%. Length, width and straightness of sides + 0.20% (Max deviation). Thickness + 4.0% (Max deviation). Straightness of sides and Rectangularity +0.15% (Max Deviation). surface flatness + 0.22% (Max deviation). Breaking strength 500 N (Minimum) and minimum 95% tiles shall be free from visible defects complete all as specified and as directed. Note:- Shade of the tiles including Colour, design and pattern shall be got approved by AGE (I). |
| 5 | M&L for Non- skidcoloured ceramic tiles of any design and pattern, area of each tile exceeding 0.11 Sqm but n.exc 0.18 Sqm ,7 to 8mm thick, in floor etc incl 15mm thick screed bed in CM 1:6, Set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles. Tiles shall be confirming to IS-15622.2006, Group B II with average water absorption between 3% to 6%. Length, width and straightness of sides + 0.10% (Max deviation). Thickness + 5.0% (Max deviation). Centre & Edge curvature and warpage + 0.50% (Max deviation). Breaking strength 1000 N (Minimum) and minimum 95% tiles shall be free from visible defects complete all as specified and directed. Note:- Shade of the tiles including Colour, design and pattern shall be approved by AGE (I) |
| 6 | Material & Labour for 600X600X 9 to 10 mm thick: light coloured Vitrified tiles of any design and pattern, 600x600x 9 to 10 mm thick, as in floor etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles. Tiles shall be confirming to IS-15622:2017, Group B1b with average water absorption between 0.08% to 3%. Length, width and straightness of sides + 0.10% (Max deviation). Thickness + 4.0% (Max deviation). Centre & Edge curvature and warpage + 0.20% (Max Deviation). Breaking strength 1200 N (Minimum) and minimum 95% tiles shall be free from visible defects. including and overscreed bed or bedding layer of mortar 15mm thick for laying of floor finishes in CM 1:6 including dismantling of existing old tile complete all as specified and directed.Note:- Shade of the tiles including Colour, design and pattern shall be approved by AGE(I) |
| 7 | M&L for pre- polished granite slab machine cut of any shade as approved by AGE(I)of 16 to 18 mm thick including necessary notching, chamfering the edges over cement screed bed including Cutting, Grinding and Mirror polishing(Granite finish) with suitable grinding stones complete laid over 20 mm thick screed bed in CM 1:6complete all as specified and directed. Note:- Edge of stone shall be bull nosed. |
| 8 | Taking up or down steel tubing 15mm dia bore and connections including cleaning for refixing or removal from site complete all as specified and directed. |
| 9 | Taking up or down steel tubing 20mmdia bore and connections including cleaning for refixing or removal from site complete all as specified and directed. |
| 10 | M&L for cutting chases on brick or concrete surface for concealed water tubing or / similar work ofgirth n.exc 10cm including making good of disturbed surfaces with PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) complete all as specified and directed. |
| 11 | M&L for Mild steel galvanized steel tubing of 15 mm bore (ISI Marked) with screwed socket joints as in concealed pipe work ,medium grade, together with all fittings heavy grade (ISI Marked ) (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc) and fixed complete to walls and ceiling with clips, wall hooks, wooden plugsor laid in floors Complete all as specified and directed |
| 12 | M&L for Mild steel galvanized steel tubing of 20 mm bore (ISI Marked) with screwed socket joints, medium grade, together with all fittings heavy grade (ISI Marked ) (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc) and fixed complete to walls and ceiling with clips, wall hooks, wooden plugsor laid in floors Complete all as specified and directed. |
| 13 | S & F in repairs stainless steel kitchen sink 1.00 mm thick (ISI Marked only)for kitchen with plugs, washer and waste 32/40mm dia incl bedding in cement mortar on to dwarf wall or including fixing cantilever cast iron brackets and connecting union to waste pipe overall all size 495mmx420mm bowl size 410x330x160mm complete all as specified directed. |
| 14 | Supply only low density PVC pipe 32/40 mm dia as in waste pipe to sink (ISI Marked only) complete all as specified and directed |
| 15 | Taking down cement plaster, terrazzo dado in any thickness from brick or stonewalls etc including raking out joints, hacking for key, scrubbing down with water etc including removal of rubbish, vegetation etc outside complex (MOD land) complete all as specified and directed. |
| 16 | M&L Rendering 15 mm thick on fair faces of brick work or concrete walls internal surfaces in CM 1:6 finished to even & smooth withoutusing extra cement complete all as specified and directed. |
| 17 | M&L Rendering 15 mm thick on fair faces of brick work or concrete walls external surfaces in two layerssfirst layer of 10 mm in CM 1:6 & 2nd layer of 5mm in CM 1:4 mixed with integral water proofing compound finished to even & smooth withoutusing extra cement complete all as specified and directed. Note:- Integral water proofing liquid will be measured and paid seperately under relevent item of Sch A. |
| 18 | Supply only Integral water proofing liquid ISI Marked as approved . Complete all as specified and directed |
| 19 | M&L rendering 5 mm thick in CM 1:3 in ceiling / Chhajja"s finished even and smooth (without using extra cement) complete all as specified and directed. |
| 20 | M & L for preparation of newsurfaces of wall & applying two coats of cement base paint complete all as specified and directed. |
| 21 | M&L for white washing three coats on walls incl preparation of newly plastered surfaces complete all as specified and directed by Engr In Charge. |
| 22 | M&L for white washing three coats on ceiling incl preparation of newly plastered surfaces complete all as specified and directed by Engr In Charge. |
| 23 | Demolition of brickwork built in cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 24 | M & L for brick work with sub class B bricks having comprencive strength not less than Kg/cm square old size , straight or curved on plan exc 6 m meanradius , built in cement mortor 1:6 complete all as specified and directed. |
| 25 | S&F in repair bib tap 15 mm dia fancy type CP (ISI Marked) with crutch or butter fly handle screwd down for iron pipe or for brass ferrule and fixed complete all as specified and directed. Note:- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site. |
| 26 | S & F in repairs15 mm bore fancy type Stop valves, chromimum plated (ISI Marked) screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified & directed. Note:- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site. |
| 27 | S & F in repairs15 mm bore fancy type Stop valves, chromimum plated with long shankand cup (concealed type) (ISI Marked) screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified & directed. Note:- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site. |
| 28 | S & F in repairs 15mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered "Hot" or "Cold" with long screwed shanks and fly nuts, (ISI Marked) screwed for iron pipe complete all as specified & directed.Note:- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site. |
| 29 | S&F in repairWash basin of size 550x400mm vitreous china (flat back type) any size (ISI Marked)incl cutting for and pinning in end of brackets for erecting stand but exclusive of fixing of supply and waste pipe but including waste fittings complete all as specified & directed. |
| 30 | S&F in repairs Vitreous china Squatting pan , "Orissa pattern, (ISI Marked) ofsize 580x440 mm white, with integral foot restexcluding flushing cistern and flush pipe including connection to trap, to flushing pipe and anti-syphonage pipe, etc complete including making good to floor complete all as specified & directed. |
| 31 | S&F in repairs Vitreous china wash down water closet pan (padestral pattren) (ISI Marked) white, excluding flushing cistern and flush pipe including connection to trap, to flushing pipe, anti-syphonage pipe, etc complete all as specified & directed. |
| 32 | S&F in repairs 10 liter capacity PVC valveless, syphonic action type flushing cistern (Dual action ISI Marked), lowlevel , white, with inlet ball valve, float and handle including brackets and flush pipe suitable for indian Type WC of polyethylene of low or high density or PVC 32 mm dia for low level cisterncomplete all as specified & directed. |
| 33 | S&F in repair health faucet with 1 mtr tube & hook (braded Tube) Make prayag Cat No BEA-85 or equivalent in Pearl complete all as specified and directed. |
| 34 | S&F PVCwaste pipe 32 mm dia (HDPE)of presure rating 6kgf/sqcmISI marked.complete all as specified and directed. |
| 35 | Dismantlingwater tank of capacity 500 ltr and removing from site of any description complete all as specified and directed |
| 36 | Dismantlingwater tank of capacity exc 500 ltr & not exc 1000 ltrs and removing from site of any description complete all as specified and directed. |
| 37 | S&F Rotational mouldedpolyethylene water storage tank (ISI Marked only)including, plastic lid cover ( ISIMarked) , doublelayered, cylindrical vertical with closed top hoisted and fixed in position of capacity 500 ltrs including making connections,20 mm dia ball valves( ISI Marked heavy duty )high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe anf fixedcomplete all as specified and directed. |
| 38 | S&F 1000ltr capacity rotational moulded polyethylene water storage tanks(ISI Marked only)including, plastic lid cover ( ISIMarked) , doublelayered, (cylindrical vertical with closed top) hoisted and fixed in position and including 20 mm dia ball valves( ISI Marked heavy duty ) high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixedcomplete all as specified and directed |
| 39 | M&L cement concrete 1:3:6 type C-1 (using 20mm graded aggregate) 75 mm thick as in plinth protection surface finished even and smooth without using extra cementincluding 4 mm thick glass dividing strip of figured glass, pin headed type, 73 mm wide inserted in position complete all as specified and directed. |
| 40 | S&F 20mm dia ball valve (ISI Marked) high pressure PTMT with epoxy coated aluminium rod & high pressure plastic ball screwed for iron pipe and fixed complete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
