Maintenance Of Operator Room And Protection To The Operating Platform Of Biyyam Regulator Cum Bridge At Ponnani Taluk, Malapuram District Maintenance Of Operator Room And Protection To The Operating Platform Of Biyyam Regulator Cum Bridge
Tender Value
4.72 Lakhs
Estimated cost
Bid Submission
24 Aug 2021
0 days left
EMD
7100
Bank guarantee accepted
Document Fee
1050
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ponnani → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Maintenance Of Operator Room And Protection To The Operating Platform Of Biyyam Regulator Cum Bridge At Ponnani Taluk, Malapuram District Maintenance Of Operator Room And Protection To The Operating Platform Of Biyyam Regulator Cum Bridge
BOQ
| Sl. No. | Item Description |
| 1 | 15.3 : Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge. |
| 2 | 15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar |
| 3 | 15.18 : Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates,boltd, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. |
| 4 | 15.28.2 : Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :Asbestos Sheet |
| 5 | od3287/2021_2022/IA : Dismantling roofing including ridges,hips,velleys and gutters etc and stacking the material within 50m lead of:Fiber roof sheet |
| 6 | 15.56 : Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 7 | 5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform |
| 8 | 5.3 : Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size). |
| 9 | 5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 10 | 10.1 : Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 11 | od3305/2021_2022/IA : Roofing with GI hard colour powder coated Trafford sheet 0.35mm thickness or nearest available thickness with overlap of 150mm at ends and GI hook or crank CI bolts and nuts including plain washers and bitumen washers etc complete as per the direction of engineer in charge. |
| 12 | 13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 13 | 13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 14 | 50.13.1 : 9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete |
| 15 | 13.46.1 : Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 16 | 14.53.1 : Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work |
| 17 | 18.15.1 : Providing and fixing brass bib cock of approved quality :15 mm nominal bore |
| 18 | 17.1.1 : Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C.flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 19 | 18.48 : Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 20 | 50.18.8.3.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 10kgf /cm2 |
| 21 | 50.18.8.9.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC Solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 110 mm pipe 4 kgf/cm2 |
| 22 | 50.18.9.22.8 : Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia Vent cowl |
| 23 | 2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 24 | 50.6.1.5 : Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete |
| 25 | 60.11.9 : BORING- with boring equipment through various strata including providing casing pipe and pulling up the same wherever necessary in all kinds of soil including gravelly soil and clay or mixture including all cost of diesel, grease, engine oil and all other labour charges etc complete.(1st depth rate for drilling up to 10 m below G L) |
| 26 | 60.11.10 : BORING- with boring equipment through various strata including providing casing pipe and pulling up the same wherever necessary in all kinds of soil including gravelly soil and clay or mixture including all cost of diesel, grease, engine oil and all other labour charges etc complete.(2nd depth rate for drilling 10 m to 20 m below G L) . |
| 27 | od21525/2021_2022/IA : Providing and fixing casing pipe (100mm dia), fitting including fixing the pipe and testing of joints complete as per the direction of engineer in charge |
| 28 | od24634/2021_2022/IA : Supply, install, test and commissioning of tube well submersible motor and pump setupto and including 10HP in existing tube well with followinga) 50mm dia upvc pipe 66mb) 3 core 4Sqmm upvc cable 70m,c) Nylon rope for hanging the motord) GI clampe) Non return valvef) 50mm GI bend, 50mm GI pipe upto non return valveg) Panel board made of powder coated GI sheet with suitable frame work with ISI marked DOL starter, Mainswitch 440Volts, 100 MA 4 pole ELCB, capacitor, selector switch - 2 nos, ammetter, voltmeter, indicator lamp- 3 nos etc (Rate per HP) ( RATE AS PER Ground water department) |
| 29 | od4387/2021_2022/IA : Supplying and Fixing of standard size gauge scales - in comply with IS 4048-1994, shall be of sturdy construction with non-corrosive material, colour white background, black graduations and red for decimal sizes (prior to coating),width-100mm to 200mm, thickness:1.5 to 2.5 mm, all including cost and conveyance of all materials, labour charges, hire charges, all other incidental charges etc. complete as per the direction of departmental officers at site. |
| 30 | od4388/2021_2022/IA : Supplying and fixing steel pointing indicator on shutters for measuring shutter openings - properly painted with red colour, complete all including cost and conveyance of all materials, labour charges, hire charges, all other incidental etc. complete as per the direction of departmental officers at site. |
AI Tender Summary
Tender Timeline
Aug 16, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 02, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender