Work For Rejuvenation / Revamping Of Rural Water Supply Scheme 18 Sd Under Sub Div. Srivijaynagar, Srivijaynagar-Rajasthan

TDR : 28864240

Tender Notice
BOQ

Expired

Srivijaynagar , Rajasthan

Tender Brief : Work For Rejuvenation / Revamping Of Rural Water Supply Scheme 18 Sd Under Sub Div. Srivijaynagar

Document Fees
₹ 1000 /-

EMD
Refer document

Tender Value
₹ 53.48 Lakhs /-

Submission Date
23-08-2021

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	(A) Rejuvenation of Raw water Conveyance system
2	Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottom with lift up to 1.5m including taking out the excavated soil and depositing and reffiling of jhiri with watering, ramming and disposal of surplus excavated soil as directed within a lead of 50m in All kinds of soil.
3	Providing and laying in position cement concrete including curing , compaction etc. completeexcluding the cost of centring and shuttering using cement concrete grade 1:3:6 (using stone agreegate 40mm nominal size) All work up to plinth level.
4	Brick masonary in foundation and plinth with bricks of class designation 75 in cement sand mortar 1:4.
5	Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finished 12mm thick. One coat
6	Providing and laying in positioncement concreting including curing, compaction etc. of specified grade excluding cost of shuttering - all work upto plinth level 1:2:4 (1 cement : 2 course sand : 4 graded stone aggregate 20 mm nominal size)
7	(B) Providing and Insallation of pumping machinery
8	Supply and installation of electric driven 3 phase mono block pump sets confirming to IS:9079 of make Kirlosker, Texmo, Crompton, Taro, Siemens, ABB of equivalment make for raw water wtc with perfect aligment and testing of complete system following capacity and size. This work also incliding fitting with delivery and suction pipe line including fitting material like Nut, Bolt, Dhaga, Rubber Sheet etc (Excluding GI Pipe/MS Pipe, CI specials cost) Complete job as per direction of enginee-incharge :- Mono Block pump with Syn Speed 1400-1440 RPM. 244 LPM, 15m Head, 3.00 HP
9	Supply and installation of electric driven 3 phase mono block pump sets confirming to IS:9079 of make Kirlosker, Texmo, Crompton, Taro, Siemens, ABB of equivalment make for clear water wtc with perfect aligment and testing of complete system following capacity and size. This work also incliding fitting with delivery and suction pipe line including fitting material like Nut, Bolt, Dhaga, Rubber Sheet etc (Excluding GI Pipe/MS Pipe, CI specials cost) Complete job as per direction of enginee-incharge :- Mono Block pump with Syn Speed 2800-2900 RPM. 239 LPM, 50m Head, 7.50 HP
10	Instalation of Monoblock Pump Set)
11	P & F G.I. Pipes (External work) with G.I. fittings (IS:1239 Mark) including trenching & refilling earth etc.80mm dia nominal bore.
12	P & F G.I. Pipes (External work) with G.I. fittings (IS:1239 Mark) including trenching & refilling earth etc.100 mm dia nominal bore.
13	Providing, lowering, laying, aligning, fixing in position in pipe line, manually operated CI D/F Sluice valves of approved make (IS: 14846- 2000- amended upto date- For Sluice Valve) PN 1.0 class and CI Tail Piece- 2 Nos. (IS: 5531- 1988- amended up to date- For CI Plane Ended Specials) of same size of following dia completeincluding all material like Instren Rubber Sheet of thickness- 6.00 mm(ISI Mark)- For Rubber Sheet), MS Nut Bolts(IS: 1363 Part I-1984- amended up to date), CI Detachable Joint (IS: 8794- 1988 amended up to date), labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer. (Nominal Dia. in mm) 80 mm
14	Providing, lowering, laying, aligning, fixing in position in pipe line, manually operated CI D/F Sluice valves of approved make (IS: 14846- 2000- amended upto date- For Sluice Valve) PN 1.0 class and CI Tail Piece- 2 Nos. (IS: 5531- 1988- amended up to date- For CI Plane Ended Specials) of same size of following dia completeincluding all material like Instren Rubber Sheet of thickness- 6.00 mm(ISI Mark)- For Rubber Sheet), MS Nut Bolts(IS: 1363 Part I-1984- amended up to date), CI Detachable Joint (IS: 8794- 1988 amended up to date), labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer. (Nominal Dia. in mm) 100 mm
15	Providing, lowering, laying, aligning, fixing in position in pipe line, manually operated CI D/F Non Return valves (NRV) of approved make (IS: 5312- Part-I- 2004 amended upto date- For Non Return Valve) PN 1.0 class and CI Tail Piece- 2 Nos. (IS: 5531 amended up to date- For CI Plane Ended Specials) of same size of following dia completeincluding all material like Instren Rubber Sheet of thickness- 6.00 mm (ISI Mark)- For Rubber Sheet), MS Nut Bolts (IS: 1363 Part I-1984- amended up to date), CI Detachable Joint (IS: 8794- 1988 amended up to date), labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer.(Nominal Dia. in mm)80 mm
16	Providing, lowering, laying, aligning, fixing in position in pipe line, manually operated CI D/F Non Return valves (NRV) of approved make (IS: 5312- Part-I- 2004 amended upto date- For Non Return Valve) PN 1.0 class and CI Tail Piece- 2 Nos. (IS: 5531 amended up to date- For CI Plane Ended Specials) of same size of following dia completeincluding all material like Instren Rubber Sheet of thickness- 6.00 mm (ISI Mark)- For Rubber Sheet), MS Nut Bolts (IS: 1363 Part I-1984- amended up to date), CI Detachable Joint (IS: 8794- 1988 amended up to date), labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer.(Nominal Dia. in mm)100 mm
17	Providing, Fabrication of Mild SteelPlane Ended/ Flanged Specials like Tees, Bends, Reducers, Enlargers, Plugs, Tail Pieces and Blank Flange made from MS pipes, MS sheet strip and MS Sheet of required sizes by welding, cutting and treading as per site conditions and as directed by the Engineer- In- Charge complete in all respect.
18	Providing of all size CI Flanged Special like Tees, Bends, Reducers and Enlargers as per IS: 1538-1993 (amended up to date) requiring for laying, testing and commissioning of AC Pipe line as per Technical Specifications and as per direction of Engineer.
19	Cubical Pannel Board
20	Supply and installation of cubical panel fabricated out from MS/CRCA sheet with required bracings and supports gasketed with foam rubber to make the panel dust and vermin proof, together with degreasing and applying two coats of red oxide and two coats and stove enamel paint. The panel includes all required hardwares, moulded insulators and separator including cutting and making spare in compartmental formation. The thickness of steel sheets 16 SWG and brassing 40x40x5mm shall be used. Pannel board should be deep 400mm and measurement taken as per front area of cubical pannel board.
21	Supply and testing and installation of mannaualy quick make quick break mulded case circuit breaker (and CCP) with adjustable electro magnetic thermal release triple pole 500 volt 50 Hz including cost of release and overload protection complete in all respect including cost of factory fitting accessories make L&T, ABB. Simenes. MCCB 160 Amp. range thermal release range128-160
22	Providing and fixing 240/415 V9 KA bracking capacity AC MCB\"s on existing boards/sheet/pannel board making connection etc. as required category firstL&T, ABB. Simenes. MCB 5 Amp to 32 Amp. Single Pole
23	Providing and fixing 240/415 V9 KA bracking capacity AC MCB\"s on existing boards/sheet/pannel board making connection etc. as required category firstL&T, ABB. Simenes. MCB 35 to 63 Amp. Single Pole
24	Providing and fixing of Aluminam Bus Bar chamber made out of alumnium or wrought aluminimum suitable for 100 amp capacity. Bas bar insulator backlite or anodized nut bolts including connections etc as required.Aluminam Bas Bar 100 amp. (35X3X600mm long) 4 strip
25	Push Button with elemenets (On/Off switch for starters) approved make L&T, Minilec, Vishnu
26	Providing and fixing of Sequre Volt Meter 0 to 500 volt range 96x96mm in square shape, making connection by PVC insulated copprer connection by PVC insulated copper doncutor throught PVC channel including cost of PVC channel etc as required approved make Havales, Rishab, Meco,
27	Providing and fixing of Secqure Ampere Meter 96x96mm. Square shape on existing panel including making connections by PVC insulated copper conductor thought PVC channel including cost of PVC channel etc as requiredRating 0 to 10Amp. , 0 to 50Amp. , 0 to 100 Amp., 0 to 150Amp approved make Havales, Rishab, Meco,
28	Providing and fixing of three pole power Contactor confirming to IS 13947-4-1 IEC 60947-4-1. Standard coil voltage 110, 240, 415, 440V 50 Hz as per ISI marked/approved makeL&T, GIC, ABB. Simenes. Contactor AC3 rating (415) 25 Amp Motor output 3 phase 15 HP
29	Providing and fixing of three pole power Contactor confirming to IS 13947-4-1 IEC 60947-4-1. Standard coil voltage 110, 240, 415, 440V 50 Hz as per ISI marked/approved makeL&T, GIC, ABB. Simenes. Contactor AC3 rating (415) 12 Amp Motor output 3 phase 7.5 HP
30	Electronic Timer 110/240 volt 50 Hz for 3 to 10sec./9 to 30sec./30 to 120sec
31	Over Load Relayrange 0.15-0.25/0.25-0.40/0.40-0.65/0.6-1/1-1.6/1.5-2.5/2.5-4/4-6.5/6-10/10-16 approved make mini lake, L&T, Simenes
32	Single phase Prevantor with automatic approved make L&T, Simenes, Vishnu.
33	Supply and laying PVC insulator submersible cable 3 core copper conductor of superior quality making connection etc in the following size as per related code, ISI Marked.Size 6.0 Sq. mm
34	Supply and laying PVC insulator submersible cable 3 core copper conductor of superior quality making connection etc in the following size as per related code, ISI Marked.Size 10.0 Sq. mm
35	Supply and laying PVC insulator submersible cable 3 core copper conductor of superior quality making connection etc in the following size as per related code, ISI Marked.Size 16.0 Sq. mm
36	Remodeling/Rejuvenation of existing Pump House at H/w Part -A Civil Works
37	Earth work in excavation in foundation, trenches or drainsincluding dressing of sides and ramming of bottoms lift upto 1.5 M including taking out the excavated soil and dressing and refilling of jhiri with watering and ramming and disposal of surplus excavated soil as directed within a lead of 50 M in all kind of soil.
38	Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering all work upto plinth level 1: 5 : 10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)
39	Brick masonary in foundation, plinth with bricks of class designation 75 in cement 1:6 (1 cement : 6 coarse sand)
40	P/L damp proof course with cement concrete grade M-150 1:2:4 mortar prepared with 1% solution of water proof compound including two coats of hot blown (2Kg per sqm) complete as per specification with glass strip 3mm thick at a distance of 1 Mtr. Interval :50 mm thick
41	Brick masonry in super structure with bricks of class designation 75 in cement mortar 1:6 upto 4.5 Mtr. Height above plinth level.
42	Reinforced cement concrete work inbeams, suspended floors, roofs, girders having slopes upto 15 degree, landing, balconies, shelves, chhajas, lintels, bands, plain windows sills, staircases and spiral staircases upto floor three level including curing, compaction , finishing with rendering in cement sand mortar 1:3 (1 cement : 3 course sand) and making good the joints excluding the cost of centering, shuttering and reinforcement.with 1: 1.5 : 3 ( 1cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
43	Providing& fabricating reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete upto floor three level:cold twisted deformed bars Thermo Mechanically treated bars(Tata/Sail)
44	Centering & shuttering with plywood or steel sheets including strutting, propping, bracing bothways with wooden members and removal of formwork for superstructure upto 4.5m. height above plinth level for suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, copings, bed plates, anchor blocks, sills, chhajas, lintel, beam etc.
45	Providingprecast cc jali nominal mix 1:2:4 reinforced with 1.6 mm dia m.s. wire including centering, shuttering, roughening, cleaning, fixing & finishing in cement mortar 1:3 etc. complete as per approved design excluding plastering of jambs, sills & soffits, upto floor three level:40 mm thick.
46	Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10 Cm. long embedded in cement concrete blocks 15x10x10 Cm. of 1:3:6 (1-Cement:3-coarse sand:6-graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
47	P/F 22 SWG MS sheet single leaf door shuttersin angle iron frame 35x35x5mm, suitably diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engineer in charge but excluding cost of chowkats including two coats of anti-corrosive red oxide primer paint. M.S. Sheet 20 SWG.
48	Providing & fixing steel glazed doors, windows and ventilators shutters of standred rolled steel section joint mitred and welded with steel 13x3mm lugs 10 Cm. long embedded in cement concrete blocks 15x10x10 Cm. of 1:3:6 (1-Cement:3-coarse sand:6-graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of plain glass panes 4mm thick with copper glazing clips and special metal-sash putty of approved make, or metal beading with screws complete including priming coat of approved steel primer, excluding the cost of metal beading and other fittings except necessary hinges of pivots steel handles and peg stay etc. as required.:- Patially fixed and partially openable fixed area not exceed 33%
49	Supplying and fixing wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20 x 3mm with suitable screw at not exceeding 150mm distance
50	Providing and fixing Square bars or other flat welded to window, ventilators etc.
51	Providing and laying brick tiles of class designation 100 over mumty roofs, grouted with cement mortar 1 : 3 mix with 2% integrated water proofing compound by wt. Of cement over 12mm thick layer of cement mortar 1 : 3 and finished neat.
52	Filling available excavated earth ( excluding rock) in trenches , plinth, side of foundations etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead upto 50 m. and lift upto 1.5 m.
53	Polished Blue Kota Stone flooring skirting, laid over 20 mm thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete :For area of each slab up to 2001 to 5000Sq. Cm :(A) 25 mm thick slab.
54	Grinding & polishing on mosaic / polished stone flooring :New surface.
55	Plaster on new surface on wall in cement sand mortar1 : 6 including raking of joints etc. complete fine finished :
56	Finishing wall in cement proof in cement brand of approved frame and manufacture and of required shade to give an even shade 3 or more coat.
57	Distempering with oil bound washable distemper of approved brand and manufactures to give an even shade including all scaffolding new work (2 or more coats) over and including scrapping and painting coat with cement primer.
58	Painting with enamel paint of approved brand and manufacture to give an even shade two or more coats on new work.
59	S/F fine dressed sand or other approved stone shelves, tands in cement 1:3 with fine dressed faces 35mm thick.
60	Demolishing brick work including stacking of serviceable material and disposal of unserviceable material within 50 meters lead. In Cement mortar.
61	Demolishing cement concrete including disposal of material within 50 meter lead : 1:4:8 or leaner mix.
62	Dismantling roofs with care including stacking of serviceable material and disposal of unserviceable material with in 50 Mtr. lead for :Stone slab roofing complete with lime dhar and kharanja.
63	Demolishing of R.B. work including stcking of steel bars and disposal of unserviceable material within 50 meters lead.
64	P & F G.I. Pipes (External work) with G.I. fittings (IS:1239 Mark) including trenching & refilling earth etc.25 mm dia nominal bore.
65	Making connection of G.I. distribution branch with G.I. main including all fitting.Up to 25 mm dia.
66	P & F Full-way valve (IS:778 Mark) or wheel valve of approved make :Gun-metal 25 mm nominal bore.
67	Supply and laying PVC insulator submersible cable 3 core copper conductor of superior quality making connection etc in the following size as per related code, ISI Marked.Size 6.0 Sq. mm
68	Supply and laying PVC insulator submersible cable 3 core copper conductor of superior quality making connection etc in the following size as per related code, ISI Marked.Size 10.0 Sq. mm
69	Supply and laying PVC insulator submersible cable 3 core copper conductor of superior quality making connection etc in the following size as per related code, ISI Marked.Size 16.0 Sq. mm
70	P & F PVC Storage Tank (IS:12701 marked indicating the BIS license No.) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc. complete of approved design.500 litres capacity.
71	Part- \"B\"- Electrical Works
72	Wiring of light point/ fan point / exhaust fan point/ call bell point with 1.5 sq. mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq.mm FR PVC insulated unsheathed flexible earth copper conductor 1.1 kV grade (IS:694) ofapproved make in surface / recessed ISI marked medium duty PVC conduit and its accessories , 18 SWG M.S. Box with earthing terminal, 6 A switch 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections testing etc; as required - G-1 Short point ( up to 3 mtrr.)
73	Wiring of light point/ fan point / exhaust fan point/ call bell point with 1.5 sq. mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq.mm FR PVC insulated unsheathed flexible earth copper conductor 1.1 kV grade (IS:694) ofapproved make in surface / recessed ISI marked medium duty PVC conduit and its accessories , 18 SWG M.S. Box with earthing terminal, 6 A switch 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections testing etc; as required - G-1 Short point ( up to 6 mtrr.)
74	Wiring of light point/ fan point / exhaust fan point/ call bell point with 1.5 sq. mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq.mm FR PVC insulated unsheathed flexible earth copper conductor 1.1 kV grade (IS:694) ofapproved make in surface / recessed ISI marked medium duty PVC conduit and its accessories , 18 SWG M.S. Box with earthing terminal, 6 A switch 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections testing etc; as required - G-1 Short point ( up to 103 mtrr.)
75	Wiring of 3 pin 5 amp. Lightplug point with 1.5 sq. mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) ofapproved makein surface / recessed ISI marked medium duty PVC conduit and its accessories , 18 SWG M.S. Box with earthing terminal, 6 A socket 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections testing etc; as required - G-1 On boartd
76	Supplying and drawing RC PVC insulated & unsheathed flexible copper conductor ISI marked ( IS:694) of 1.1 KV grade and approved make in existing surface of recessed conduit/casing capping including making connections etc. as required. Group-1 2 x 1.5 sq. mm
77	Supplying and drawing RC PVC insulated & unsheathed flexible copper conductor ISI marked ( IS:694) of 1.1 KV grade and approved make in existing surface of recessed conduit/casing capping including making connections etc. as required. Group-1 2 x 2.5 sq. mm
78	Supplying and fixing of power plug point accessories on 18 SWG metal box of size 175x100x60 mm on surface or in recessed with suitable size phenolic larninated sheet cover including cost of 6 pin 16 amp. Switch and socket outlet making connection, testing etc as required
79	P & F 240/415 V MCB of breaking capacity not less than 10 KV ( B/C/D tripping characteristic) ISI marked IS:8828 (1998)/conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required. Group-16 A to 32 A rating
80	P & F 240/415 V isolator conforming to IS:13947-III/ IEC 60947-3 on existing board/ sheet including making connections with lugs, testing etc. as required Group-1 30 A/ 40 A rating
81	P & F Recessed/Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with copper bus bar, shorting link, neutral link, earth link and din bar, conforming to IS 13032 & IS8623 including making internal DB terminatyions with coppper lugs, testing etc; as required 6 Way
82	P & F ISI marked flush type 120/280 watt rotary step fan regulator including making connection testing etc. as required.
83	P & F TP&N 415 V AC-23A front handle operated switch disconnector fuse unit cubical type, without metallic enclosure, confirming to IS-13497 P-III in existing panel (W/O HCBC fuses) including making connections with lugs, testing etc. as required. Group-132 A rating
84	Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying3 to 4 mtr. below the ground level with 20 mm dia. G.I. \"B\" class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and brick masonary finished chamber covered with ferro cement cover CI frame of size 300 mm x 300 mm complete with alternate layers of sals charcol / coke, testing of earth resistance as rquired.
85	S & Laying following size earth wire/stripin horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 10 SWG copper Wire.
86	P & F 18 swgM.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm,12 mm dia rod fan hook with 100 mmlength extended on each side .
87	P & F Star rated double ball bearing capacitor start, aluminium body & blade ceilingfanwith down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. 1200 mm Sweep 5 Star rated
88	P&F of Double ball bearing, capacitor startsingle phase metallicblade fresh air fan, in existing opening including cost of hardware , flexible copper conductor ,making connections, testing etc. as required. 300 mm sweep
89	P & F strip type fluorscent tube fitting fabricated from (CRCA sheet and finished with powder coating / stove enamelled paint) / (extruded non corrosive UV resist EP channel) complete with accessories (Low Loss Copper Choke, starter, starter seat) / Electronic Choke with terminal block duly prewired with copper conductor including making connection, testing etc. as required( without tube).1 X 36 Watts with OCCB
90	P & F Flucrscent tube rod in existing fixtures as required. Group-136/40 Watts
91	Wiring for sub mains ISI marked ( IS:694) 1100 Volts grade PVC insulated flat twin core sheathed solid aluminium conductor with 10 SWS G.I. Support wire duty clipped etc. as required. Group-1 4.0 sq. mm
92	P & F IP-66 protected street light luminaire on existing bracket suitable for HPSV/ MH LAMP, made out from powder coated single piece die cast aluminium housing, electrochemically brightened and anodized POT optics aluminium reflector, heat resistant and toughened glass cover and accessories like copper ballast, electronic ignitor, capacitor, holder prewired up to terminal block etc. as required including making connection testing etc. as required(without lamp) Fixture suitable for HPSV Lamp 1 x 150 Watt
93	P & F Normal / High Output High pressure sodium vapour/ Metal halide / Halogen lampas required. 150 Watt
94	Rejuvenation/ReConstruction of Boundary wall. Part- \"A\" Brick Masonry Boudary Wall
95	Earth work in excavation in foundation, trenches or drains including dressing of sides and ramming of bottom lift upto 1.5 M including taking out the excavated soil and depositing and refilling of Jhiri with watering and ramming and disposal of surplus excavated soil as directed within a lead of 50 M in all kind of soil
96	Providing and laying cement concrete including curing compaction etc. comp. Using stone agg. 40 mm nominal size in foundation and plinth excluding cost of shuttering using 1 cement:5 sand :10 aggregate mix.
97	Brick masonary in foundation and plinth with bricks of class designation 75 in cement mortar 1:6 (1 cement and 6 coarse sand)
98	Brick masonary in super structure with brick of class designation 75 in cement mortar 1:6 upto 4.5M height above plinth level.
99	Cement plaster on new surface on walls with cement bajri mortar 1:4 including finishing of corners the complete 12mm thick in one coat.
100	Finishing wall with water proofingpaint of approved brand and manufacture and of required shade to give an even shade including all scaffolding new work 3 or more coats.
101	Providing and laying damp-proof course with cement concrete grade M-150 (1:2:4) mortar prepared with 1% solution of water-proof compound including two coats of hot blown bitumen ( 2 Kg. per Sqm) complete as per specification with glass strip 3mm thick at a distance of 1m. interval:50mm thick
102	Part- \"B\"- Brick Masonary Pillars and MS Gate made of Hollow Tube
103	Earth work in excavation in foundation, trenches or drains including dressing of sides and ramming of bottom lift upto 1.5 M including taking out the excavated soil and depositing and refilling of Jhiri with watering and ramming and disposal of surplus excavated soil as directed within a lead of 50 M in all kind of soil
104	Providing and laying cement concrete including curing compaction etc. comp. Using stone agg. 40 mm nominal size in foundation and plinth excluding cost of shuttering using 1 cement:5 sand :10 aggregate mix.
105	Brick masonary in super structure with brick of class designation 75 in cement mortar 1:6 upto 4.5M height above plinth level.
106	Cement plaster on new surface on walls with cement bajri mortar 1:4 including finishing of corners the complete 12mm thick in one coat.
107	Finishing wall with water proofingpaint of approved brand and manufacture and of required shade to give an even shade including all scaffolding new work 3 or more coats.
108	Painting with ready mix paint of approved brand and manufacture to give an even shade two ormore coats on new steel work.
109	Providing and fixing steel gate grating & grills made of square, rectangular hollow tubelar sectionsor other flats black pipe with hold fast & fittings complete as per design & drawing including cutting welding & fabrication with priming coat of red oxide.
110	Providing and laying damp-proof course with cement concrete grade M-150 (1:2:4) mortar prepared with 1% solution of water-proof compound including two coats of hot blown bitumen ( 2 Kg. per Sqm) complete as per specification with glass strip 3mm thick at a distance of 1m. interval:50mm thick
111	Rejuvenation of RCC Slow Sand Filters. (1x7.0 & 1X4.5 Mtr dia)
112	Providing and Placing of new filter media as (i) Sand shall be hard and resistant quartz or quartzite and free of clay, fine particles, soft grains and dirt of any description. (ii) Effective size shall be 0.20 to 0.30 mm. (iii) Uniformity Coefficient not be more than 5.0 nor less than 3.0. (iv) Ignition loss should not exceed 0.70% by weight. (v) Soluble fraction in HCL acid shall not exceed 7.0% by weight, (vi) Silica content should not be less than 95% (vii) Specific Gravity shall be in the range between 2.55 to 2.65 (viii) Wearing loss shall not exceed 3.0%. and as per specifications given in IS: 8419 (Part-I). (ix) The sand should not contain more than 2% of calcium and manganese calculated as carbonate. Filter media (fine sand and coarse sand) should be processed through. Disindicator and dust seperator in automatic plant including screening of sand to desired. Specification and washing and cleaning of sand with water by aqua wash technology at quarry site. The sand shall not contain more than 5% acid soluble matter as determined by solubility test in Appendix B of IS: 8419 (Part-I) (Fine sand 0.2 to 0.3mm and coarse sand 1.0 to 1.7mm)
113	Labour charges for screening of old sand (received from filter beds) through the standard sieves, washing the sand with HCL acid of required concentration as directed by the Engineer- In- Charge, so as to remove all the mud and other deposits from sand grains and then clean with water till the sand is as neat and clean that it impart no colour to clean while washing. It also includes placing this washed filter media (sand) in filter beds in layer as instructed by the Engineer- In- Charge. (RGF, SSF)
114	Labour charges for screening of old gravel (received from filter beds) through the standard diffrent sizes sieves for required sizes of gravel, washing the gravel with HCL acid of required concentration as directed by the Engineer- In- Charge, so as to remove all the mud and other deposits from gravel grains and then clean with water till the gravel is as neat and clean that it impart no colour to clean while washing. It also includes placing this washed gravel in filter beds in layer as instructed by the Engineer- In- Charge. (RGF, SSF)
115	Removing &Re-fixing of pipes for under drainge system including cleaningof one end pluggedpipesand fixing /embeded in CM 1:4 on one end and fixing other endin collecting channel with CM 1:4 with all Material etc.(Excl.cost of pipes) This job, also,includes Making 4mm dia holes if requiredin pipes @15 cm c/c in zig-zag pattern
116	Demolishing of cement concrete including disposal of rubbish material within 50 meter lead in 1:3:6 or richer mix.
117	Plaster on new surface on walls in cement sand mortar 1:3 including racking of joints etc. complete fine finished 12 mm thick in one coat.
118	Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering =All up to plinth level :-1:1:2 (1Cement :1 Course Sand :2 Graded stone aggregate 20 mm nominal size
119	Brick masonary in foundation and plinth with bricks of class designation 75 in cement sand mortar 1:4.
120	P&F GI pipes class-B (External work) With GI fittings(IS:1239 mark) including trenching and refilling earth etc. 100mm dia nominal bore.
121	Steel work welded in built up section, trusses and frame work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer above plinth level up to 4.5m height: In tees, angles, flats and channels.
122	Demolishing brick work including stacking of serviceable material and disposal of U/S material within 50m lead (B/W in cement mortar)
123	Demolishing of R.C.C. work including stacking of steel bars and disposal of unserviceab le material within 50 meters lead.
124	Providing and fabricating steel reinforcement for RCC work including cutting, bending, placing in position and binding complete including cost of binding wire in foundations, raft footing, step beams, base of columns etc. upto plinth level. Hot rolled deformed (IS:1139) cold twisted (IS:1786) bars.
125	Reinforced cement concrete work in walls (any thickness ) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor three level s including curing , compaction, finishing with rendering in cement sand mortar 1:3 (1cement : 3 coarse sand) and making good the joints, excluding the cost of centring, shuttering and reinforcement:: M-25 grade mix 1:1:2 (1 cement : 1 coarse sand : 2 graded stone agreegate 20mm nominal size)
126	Reinforced cement concrete work in beams, suspended floors, roofs girders having slope up to 15 degree, landings, balconies, shelves, chhajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. up to floor three level s including curing , compaction, finishing with rendering in cement sand mortar 1:3 (1cement : 3 coarse sand) and making good the joints, excluding the cost of centring, shuttering and reinforcement:: M-25 grade mix 1:1:2 (1 cement : 1 coarse sand : 2 graded stone agreegate 20mm nominal size)
127	Centring and shuttering with ply wood or steel sheets including struting, proping, bracing bothways and removal of form work for super structure upto 4.5m height above plinth level, for Walls (any thickness) including attatched pillasters, butresses, plinth and string course.
128	Add extra for shuttering in circular work in plan, upto dia 10m
129	Centring and shuttering for Suspended floors, roofs, landing, staircases, balconies, girders, cantilevers, bands, copings, bed plates, anchor blocks, sills, chajjas etc.
130	Providing and fixing Ist quality standard White/Ivory Glazed Tiles ISI marked (IS:13753) of size 300mmx200mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster).Category-I Kajaria, Jhonson, Orient, Somani make etc.
131	Providing, lowering, laying, aligning, fixing in position in pipe line, manually operated CI D/F Sluice valves of approved make (IS: 14846- 2000- amended upto date- For Sluice Valve) PN 1.0 class and CI Tail Piece- 2 Nos. (IS: 5531- 1988- amended up to date- For CI Plane Ended Specials) of same size of following dia completeincluding all material like Instren Rubber Sheet of thickness- 6.00 mm(ISI Mark)- For Rubber Sheet), MS Nut Bolts(IS: 1363 Part I-1984- amended up to date), CI Detachable Joint (IS: 8794- 1988 amended up to date), labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer. (Nominal Dia. in mm):- 80mm dia
132	Providing, lowering, laying, aligning, fixing in position in pipe line, manually operated CI D/F Sluice valves of approved make (IS: 14846- 2000- amended upto date- For Sluice Valve) PN 1.0 class and CI Tail Piece- 2 Nos. (IS: 5531- 1988- amended up to date- For CI Plane Ended Specials) of same size of following dia completeincluding all material like Instren Rubber Sheet of thickness- 6.00 mm(ISI Mark)- For Rubber Sheet), MS Nut Bolts(IS: 1363 Part I-1984- amended up to date), CI Detachable Joint (IS: 8794- 1988 amended up to date), labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer. (Nominal Dia. in mm):-150 mm dia
133	Rejuvenation of Storage tank at 18 SD H/Ws.
134	Earth work in surface excavation not exceeding 30 Cm. In depth but exceeding 1.5 meter in width as well as 10 Sam. on plan including disposal of excavated earth up to 50 Mtr. And lift up to 1.5 Mtr. Disposed soil to be leveled and neatly dressed : All kinds of soil.
135	Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottom with lift up to 1.5m including taking out the excavated soil and depositing and reffiling of jhiri with watering, ramming and disposal of surplus excavated soil as directed within a lead of 50m in All kinds of soil.
136	Silt clearance from Sedimentation cum storage tank with lift upto 4.5 Mtr. and lead upto 200 Mtr.Silt to be disposed outside of Headworks Boundaries. If siltto be disposed more than 200 M distance separate payment for each. Leadof 50 Mtr.or onward beyond 200 M distance will be payable as per BSR Disposed silt to be levelled and neatly dressed including stacking of useful material if any available during excavation for all kind of soil. Silt to be carried out by means of mechanical system i.e. Tractor craw/Trolly or any other mechanical system. No extra payment shall be done for lift of any limit. This workalso involves dressing ofbottom purposed which is to be done mannually to be maintained as per direction of Engineer In Charge.
137	Add extra for every additional lead of 50M or part thereof (from 1.0 KM to 2.0 KM)
138	Providing and laying in position cement concrete including curing , compaction etc. completeexcluding the cost of centring and shuttering using cement concrete grade 1:5:10 (using stone agreegate 40mm nominal size) All work up to plinth level.
139	Brick masonary in foundation and plinth with bricks of class designation 75 in cement sand mortar 1:6.
140	Preparing surface levelled & dressed to proper slope & laying over it on tibba sand properly rommed and watered in 2 Layers of 5 cm each, Providing and laying 250 micron LDPE filmas per ISS:2506-1984 including overlapping on the finished surface of compacted tibba sand. Over LDPE film 15 mm thick cement bajri mortar 1:3 shall be provided and laid which shall be cured properly. Over the base mortar single layer Ist class brick lining incement bajri mortar 1:3 shall be provided with joints not more than 8 mm and curing done for 14 days. This also includes providing weedicides & anti-termite treatment as per specifications.
141	Pointing on brick or tile masonary in cement sand mortar 1:3 (1-Cement:3-Sand) :Flush or ruled pointing.
142	Jungle Clearance Ordinary including thick bushes plants and bushes shrubs etc.
143	Providing and fixing PVC float in Raw Water Storage tank with CI tail piece 150mm dia-2 Nos, CI puddle collar-150mm dia- 1.20 M- 1 No. and PVC hose pipe- 150mm dia -6 M & all accessaries complete in all respect as per Instructions of Engineer In Charge. Complete Job
144	Rejuvenation of RCC CWR at 18 SD
145	Providing and fabricating steel reinforcement for RCC work including cutting, bending, placing in position and binding complete including cost of binding wire in foundations, raft footing, step beams, base of columns etc. upto plinth level. Hot rolled deformed (IS:1139) cold twisted (IS:1786) bars.
146	Reinforced cement concrete work in walls (any thickness ) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor three level s including curing , compaction, finishing with rendering in cement sand mortar 1:3 (1cement : 3 coarse sand) and making good the joints, excluding the cost of centring, shuttering and reinforcement:: M-25 grade mix 1:1:2 (1 cement : 1 coarse sand : 2 graded stone agreegate 20mm nominal size)
147	Reinforced cement concrete work in beams, suspended floors, roofs girders having slope up to 15 degree, landings, balconies, shelves, chhajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. up to floor three level s including curing , compaction, finishing with rendering in cement sand mortar 1:3 (1cement : 3 coarse sand) and making good the joints, excluding the cost of centring, shuttering and reinforcement:: M-25 grade mix 1:1:2 (1 cement : 1 coarse sand : 2 graded stone agreegate 20mm nominal size)
148	Reinforced cement concrete work in arches, arches ribs, domes, vaults, shells, folded plate and roofs having slope up to 15 degree, landings, balconies, shelves, chhajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. up to floor three level s including curing , compaction, finishing with rendering in cement sand mortar 1:3 (1cement : 3 coarse sand) and making good the joints, excluding the cost of centring, shuttering and reinforcement:: M-20 grade mix 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone agreegate 20mm nominal size)
149	Centring and shuttering with ply wood or steel sheets including struting, proping, bracing bothways and removal of form work for super structure upto 4.5m height above plinth level, for Walls (any thickness) including attatched pillasters, butresses, plinth and string course.
150	Add extra for shuttering in circular work in plan, upto dia 10m over item no. 4.12.1 to 4.12.3
151	Centring and shuttering for Suspended floors, roofs, landing, staircases, balconies, girders, cantilevers, bands, copings, bed plates, anchor blocks, sills, chajjas etc.
152	Centring and shuttering for Arches, arch-ribs, domes and vaults etc exceeding 6.0m dia.
153	Steel work welded in built up section, trusses and frame work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer above plinth level up to 4.5m height: In tees, angles, flats and channels.
154	P&F angle iron frame 25x25x3mm for ventilators with fixed wire gauge 16 mesh 24 gauge incl 10mm dia MS bars at a interval of 100mm welded/screwed to frame with metal beading 20x3mm comp in all respects.
155	P&F 1mm thick MS sheet door shutter with frame of 40x40x6mm angle iron, 3mm gusset plate at the junction and corners incl all fittings and applying priming coat of approved steel primer : MS flat 30x6mm for diagnol braces.
156	Finishing walls with water proofing cement paint of approved brand and manufacture and have required shade to give an even shade including all scaffolding. New work ( 3or more coats.)
157	Painting with enamel paint of approved brand and manufacture in all shades to give an even shade. New steel work (2 or more coats )
158	Demolishing of R.C.C. work including stacking of steel bars and disposal of unserviceab le material within 50 meters lead.
159	Rejuvenation of Store Cum Living roomat H/w
160	Earth work in excavation infoundation trenches of drains including dressing of sides and ramming of bottoms, lift upto 1.5 Mtr. Including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter.: All kinds of soil
161	Providing and laying in position cement concrete including curing, compaction etc. complete and shuttering- All work upto plinth level. 1:3:6 ( 1 Cement: 3 coarse sand: 6 graded stone aggregate 40mm nominal size)
162	Brick masonary in foundation and plinth with bricks of class designation 75 in : Cement mortar 1:6 ( 1 cement: 6 coarse sand)
163	Desmantling of floring with car including stacking of servceable material and diposal of unserviceable material with in 50 Mtr. Lead forCement concrete flooring.
164	Brick masonary in super structure upto 3rd storie with bricks of class designation 75 in : Cement mortar 1:6 ( 1 cement: 6 coarse sand)
165	Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with wooden members and removal of formwork for superstructure upto 4.5 mtr above plinth, for: (1) Suspended floors, roofs landings staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, stills, chhajjas, lintel, beam etc.
166	Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding ( including cost of binding wire) all complete upto floor three level. Cold twisted deformed bars (IS:1786) hot rolled deformed ( IS:1139)
167	Reinforced cement concrete work in beams, suspended floors, roofs girders having slopes upto 150 , landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and sprial staircases upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 ( 1 cement: 3 coarse sand ) and making good the joints excluding the cost of centering, shuttering and reinforcement: with 1:1:2 ( 1 cement: 1 coarse sand : 2 graded stone aggrgate 20mm nominal size)
168	Plaster on new surface on walls in cement sand mortar 1:6 including raking of joints etc. complete fine finished. 12 mm thick
169	Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster incl. disposal of rubbish to the dumping ground within 50mtr lead
170	6 mm cement plaster to ceiling of mix 1:3 ( 1 cement: 3 fine sand)
171	Cement concrete floorng grade 1:2:4 ( 1 Cement: 2 Coarse sand : 4 graded stone aggregate) rounding off edges etc. but excluding the cost of nosing of steps etc. complete 50mm thick with 20mm thick nominal size aggregate.
172	Providing 100mm thick average mud phuska damped brick earth on roofs laid to slope consolidated and plastered with 25mm thick mud mortar mixed with phuska at 35 Kg/cum of earth, gobri leaping with mix 1:1 (1 clay: 1 cow dung) and covered with flat tiles of bricks class designation 100 grouted with cement mortar 1:3 ( 1 cement: 3 fine sand) mixed with 2% of integrated water proofing compound by wt. of cement and finished neat.
173	Providing & fixing steel glazed doors, windows and ventilators shutters of standred rolled steel section joint mitred and welded with steel 13x3mm lugs 10 Cm. long embedded in cement concrete blocks 15x10x10 Cm. of 1:3:6 (1-Cement:3-coarse sand:6-graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of plain glass panes 4mm thick with copper glazing clips and special metal-sash putty of approved make, or metal beading with screws complete including priming coat of approved steel primer, excluding the cost of metal beading and other fittings except necessary hinges of pivots steel handles and peg stay etc. as required. Windows side hung (openable)
174	Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150 mm distance.
175	Providing and fixing Square bars or other flat welded to window, ventilators etc.
176	Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding:New work ( Three or more coats)
177	Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: New work (two or more coats) over and including scrapping and priming coat with cement primer.
178	Painting with enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work
179	Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10 Cm. long embedded in cement concrete blocks 15x10x10 Cm. of 1:3:6 (1-Cement:3-coarse sand:6-graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
180	Providing precast cement concrete jali, nominal mix 1:2:4 (1-Cement:2-Sand:4-stone aggregate 6 mm nominal size) reinforced with 1.6 mm dia Mild steel wire, including centering and shuttering roughening, cleaning, fixing and finishing in cement mortar 1:3 (1-Cement:3-fine sand) etc., complete as per approved design excluding plastering of jambs, sills and soffits up to floor three level. 40 mm thick
181	Providing & fixing ms sheet single leaf door shutters in angle iron frame 35x35x5 mm suitablly diagonally braced with 25x3mm flat ironabove and below lock rail of size 50x5 mm beading extra includingall fittings, as per direction of engg. incharge but excluding coes of chokhats including two coats of anti corrastie red oxide primer panit. M.S. Sheet 20 S.W.G.
182	Part- \"B\"- Electrical Works
183	Wiring of light point/ fan point / exhaust fan point/ call bell point with 1.5 sq. mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq.mm FR PVC insulated unsheathed flexible earth copper conductor 1.1 kV grade (IS:694) ofapproved make in surface / recessed ISI marked medium duty PVC conduit and its accessories , 18 SWG M.S. Box with earthing terminal, 6 A switch 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections testing etc; as required - G-1 Short point ( up to 3 mtrr.)
184	Wiring of light point/ fan point / exhaust fan point/ call bell point with 1.5 sq. mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq.mm FR PVC insulated unsheathed flexible earth copper conductor 1.1 kV grade (IS:694) ofapproved make in surface / recessed ISI marked medium duty PVC conduit and its accessories , 18 SWG M.S. Box with earthing terminal, 6 A switch 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections testing etc; as required - G-1 Medium point ( up to 6 mtrr.)
185	Wiring of light point/ fan point / exhaust fan point/ call bell point with 1.5 sq. mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq.mm FR PVC insulated unsheathed flexible earth copper conductor 1.1 kV grade (IS:694) ofapproved make in surface / recessed ISI marked medium duty PVC conduit and its accessories , 18 SWG M.S. Box with earthing terminal, 6 A switch 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections testing etc; as required - G-1 Long point ( up to103 mtrr.)
186	Wiring of 3 pin 5 amp. Lightplug point with 1.5 sq. mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) ofapproved makein surface / recessed ISI marked medium duty PVC conduit and its accessories , 18 SWG M.S. Box with earthing terminal, 6 A socket 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections testing etc; as required - G-1 On boartd
187	S&F following sizes (dia) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall and making good the same as required. Group-1 25 mm
188	Supplying and drawing RC PVC insulated & unsheathed flexible copper conductor ISI marked ( IS:694) of 1.1 KV grade and approved make in existing surface of recessed conduit/casing capping including making connections etc. as required. Group-12 x 1.5 sq. mm
189	Supplying and drawing RC PVC insulated & unsheathed flexible copper conductor ISI marked ( IS:694) of 1.1 KV grade and approved make in existing surface of recessed conduit/casing capping including making connections etc. as required. Group-12 x 2.5 sq. mm
190	Supplying and fixing of power plug point accessories on 18 SWG metal box of size 175x100x60 mm on surface or in recessed with suitable size phenolic larninated sheet cover including cost of 6 pin 16 amp. Switch and socket outlet making connection, testing etc as required
191	P & F 240/415 V MCB of breaking capacity not less than 10 KV ( B/C/D tripping characteristic) ISI marked IS:8828 (1998)/conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required. Group-16 A to 32 A rating
192	P & F 240/415 V isolator conforming to IS:13947-III/ IEC 60947-3 on existing board/ sheet including making connections with lugs, testing etc. as required Group-1 30 A/ 40 A rating
193	P & F Recessed/Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with copper bus bar, shorting link, neutral link, earth link and din bar, conforming to IS 13032 & IS8623 including making internal DB terminatyions with coppper lugs, testing etc; as required 6 Way
194	P & F ISI marked ( IS:3854) 6 amp flush type switch including cutting hole in tile and making connection testing etc. as required Group-1
195	P & F ISI marked ( IS:3854) 16 amp flush type switch including cutting hole in tile and making connection testing etc. as required Group-1
196	P & F ISI marked ( IS:1293) 3 pin 6 amp. Flush type socket including cutting hole in tile and making connection testing etc. as required. Group-1
197	P & F ISI marked ( IS:1293) 3/6 pin 16 amp. Flush type socket including cutting hole in tile and making connection testing etc. as required. Group-1
198	P & F ISI marked 6 amp bakelite betten/angle holder including making connection testing etc. as required. Group-1
199	P & F Star rated double ball bearing capacitor start, aluminium body & blade ceilingfanwith down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. 1200 mm Sweep 5 Star rated
200	P & F ISI marked flush type 120/280 watt rotary step fan regulator including making connection testing etc. as required.
201	P & F onload change over switch, frent handle operated, four pole 415 V confirming to IS: 13947 P-III including connections, testing etc. as required in the following rating Group-163 A
202	Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying3 to 4 mtr. below the ground level with 20 mm dia. G.I. \"B\" class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and brick masonary finished chamber covered with ferro cement cover CI frame of size 300 mm x 300 mm complete with alternate layers of sals charcol / coke, testing of earth resistance as rquired.
203	S & Laying following size earth wire/stripin horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 10 SWG copper Wire.
204	P & F 18 swgM.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm,12 mm dia rod fan hook with 100 mmlength extended on each side .
205	P & F Star rated double ball bearing capacitor start, aluminium body & blade ceilingfanwith down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. 1200 mm Sweep 5 Star rated
206	P&F of Double ball bearing, capacitor startsingle phase metallicblade fresh air fan, in existing opening including cost of hardware , flexible copper conductor ,making connections, testing etc. as required. 300 mm sweep
207	P & F ISI marked 6 amp surface type ceiling rose Including making connection testing etc. as required. Group-1
208	P & F strip type fluorscent tube fitting fabricated from (CRCA sheet and finished with powder coating / stove enamelled paint) / (extruded non corrosive UV resist EP channel) complete with accessories (Low Loss Copper Choke, starter, starter seat) / Electronic Choke with terminal block duly prewired with copper conductor including making connection, testing etc. as required( without tube).1 X 36 Watts with OCCB
209	P & F Flucrscent tube rod in existing fixtures as required. Group-1 36/40 Watts
210	Wiring for sub mains ISI marked ( IS:694) 1100 Volts grade PVC insulated flat twin core sheathed solid aluminium conductor with 10 SWS G.I. Support wire duty clipped etc. as required. Group-14.0 sq. mm
211	P & F IP-43 protected street light luminaire on existing bracket suitable for CFL, made out from CRCA sheet steel finished/ Aluminium coatingwith stove enameled paint, having deep drawn aluminium alloy canopy reflector cum control gear tray, clear ribbed acrylic diffuser held with synthetic gasket and minimum 4 nos toggles, with all necessaryaccessories copper wound ballast, starter, holder prewired with pvc insulated copper conductor including making connection testing etc. as required(without tube).1 X 36 Watt
212	P & F two pin energy efficient compact fluorscent lamp in existing holder/fixture as required.36 Watt 4 pin
213	(I) Construction of Approach Road and Development of H/Ws (I) ROAD
214	Earth work in surface excavation not exceeding 30 Cm. In depth but exceeding 1.5 meter in width as well as 10 Sam. on plan including disposal of excavated earth up to 50 Mtr. And lift up to 1.5 Mtr. Disposed soil to be leveled and neatly dressed : All kinds of soil.
215	Providing and laying factory made Plastic Coated designer cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction and of approved size and design/ shape laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-incharge. General specification of blocks:1) Shape as defined by Engineer incharge. 2) Tensile splitting strength and braking load as per BS 6717:2001. 3) Color:natural colour as decided by EI.4) Variation in dimension: Less than 1.6mm. 5) Variation in thickness: Less than 3.2mm.6) Abrasion: As per BS: 6717:200104-06-2015- 80 mm thick
216	Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottom with lift up to 1.5m including taking out the excavated soil and depositing and reffiling of jhiri with watering, ramming and disposal of surplus excavated soil as directed within a lead of 50m in All kinds of soil.
217	Providing and laying in position cement concrete including curing , compaction etc. completeexcluding the cost of centring and shuttering using cement concrete grade 1:5:10 (using stone agreegate 40mm nominal size) All work up to plinth level.
218	Brick masonary in foundation and plinth with bricks of class designation 75 in cement sand mortar 1:6.
219	Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finished 12mm thick. One coat
220	Finishing walls with water proofing cement paint of approved brand and manufacture and have required shade to give an even shade including all scaffolding. New work ( 3or more coats.)
221	(II) SIGNAGE BOARD
222	Providing and fixing M.S. sign board size 180x120cm made of MS angle (vertical - 2 Nos. 50x50x6mm - 2.60M long horizontal angle (30x30x4mm - 1.80M long ) Iron frame and M.S. Sheet (1.25mm thick (18 gauge). This job involves fixing of board in Cement concret 1:2:4 block 30x30cm x 50cm deep. Fixing of MS sheet on frame with nut bolt board including frame with enamel paint of light blue color, Writing of detail of scheme with white paint as per instruction of Engineer Incharge complete job board size 180x120cm
223	© ELECTRIC WORK
224	Supply and erection of hot dipped galvanised steel swaged tubular pole conforming to IS: 2713-1980 (part I to II) with galvanised base plate in position including excavation of the pit and filling the same with C.C. of M-20 grade (1:1.5:3) from base plate to 50cm above ground level, with the help of steel frame not less than 40 cm dia up to 114.3mm outer dia and 50 cm beyond 114.3mm outer dia around the pole. Duly finished with cement plaster, earthing terminals , cable entry, GI cable sleeve complete as required. The pole shall be galvanisedusing ISI mark seamless tube for structural purpose of following height & designation.( See Table E - 09 for specs. ):- 7.5 Mtr. ( 410 SP - 5 )
225	P & F IP-66 protected street light luminaire on existing bracket suitable for HPSV/ MH LAMP, made out from powder coated single piece die cast aluminium housing, electrochemically brightened and anodized POT optics aluminium reflector, heat resistant and toughened glass cover and accessories like copper ballast, electronic ignitor, capacitor, holder prewired up to terminal block etc. as required including making connection testing etc. as required(without lamp):-Fixture suitable for HPSV Lamp, 1 x 150 Watt
226	P & F Normal / High Output High pressure sodium vapour/ Metal halide / Halogen lampas required.:- 150 watt
227	P/Laying P.V.C./ XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with Copper conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved makein ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick underlayer ofsand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size.2.5 sqmm, 2 core.
228	P&F 240/415 V isolator conforming to IS:13947-III/ IEC 60947-3 on existing board / sheet including making connections, testing etc. as required. Double Pole - 30/40 A rating.
229	Replacement of existing Old/Damaged pipe lines
230	Excavating trenches of required width as per size of pipes, including excavation for sockets and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil and then returning the soil as required in layers not exceeding 20 Cm in depth including consolidating each deposited layer by ramming and watering etc. and disposing of surplus excavated soil as directed within a lead of 50 Mtr. Soft soil (Hard soil)
231	Providing, Laying, Jointing, Commissioning and Testing ofISI marked HDPE pipes of Grade PE-80 and PN- 6 for potable water as per IS 4984: 1995 with necescity jointing material like mechanical connectors, i.e. thread/ insert joint /quick release couper joint / compression fitting joint or flanged joint and specials jointing pipe by butt fusion welding method, including all taxes ( Central and local), transportation and freight charge, inspection charges, loading / unloding charges, stacking the same in closed shade duly protecting from sunrays and rains, including cost of labour and material, specail (Tee, Bend etc.) satisfactory. hydraulic testing etc. completeas per technical sepcifications and direction of engineer-in charge (excluding earth work ) (supply upto 90 mm dia coil & above 90 mm dia straigth length in 6 M) Note: Providing and fixing of all requisite spexials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.90 mm (With E. D. Exemption)
232	Providing, lowering, laying, aligning, fixing in position in pipe line, manually operated CI D/F Sluice valves of approved make (IS: 14846- 2000- amended upto date- For Sluice Valve) PN 1.0 class and CI Tail Piece- 2 Nos. (IS: 5531- 1988- amended up to date- For CI Plane Ended Specials) of same size of following dia completeincluding all material like Instren Rubber Sheet of thickness- 6.00 mm(ISI Mark)- For Rubber Sheet), MS Nut Bolts(IS: 1363 Part I-1984- amended up to date), CI Detachable Joint (IS: 8794- 1988 amended up to date), labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer. (Nominal Dia. in mm) 80 mm dia
233	Providing, lowering, laying, aligning, fixing in position in pipe line, manually operated CI D/F Sluice valves of approved make (IS: 14846- 2000- amended upto date- For Sluice Valve) PN 1.0 class and CI Tail Piece- 2 Nos. (IS: 5531- 1988- amended up to date- For CI Plane Ended Specials) of same size of following dia completeincluding all material like Instren Rubber Sheet of thickness- 6.00 mm(ISI Mark)- For Rubber Sheet), MS Nut Bolts(IS: 1363 Part I-1984- amended up to date), CI Detachable Joint (IS: 8794- 1988 amended up to date), labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer. (Nominal Dia. in mm)100 mm dia
234	Providing, lowering, laying, aligning, fixing in position in pipe line, manually operated CI D/F Sluice valves of approved make (IS: 14846- 2000- amended upto date- For Sluice Valve) PN 1.0 class and CI Tail Piece- 2 Nos. (IS: 5531- 1988- amended up to date- For CI Plane Ended Specials) of same size of following dia completeincluding all material like Instren Rubber Sheet of thickness- 6.00 mm(ISI Mark)- For Rubber Sheet), MS Nut Bolts(IS: 1363 Part I-1984- amended up to date), CI Detachable Joint (IS: 8794- 1988 amended up to date), labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer. (Nominal Dia. in mm)125 mm dia
235	Providing, lowering, laying, aligning, fixing in position in pipe line, manually operated CI D/F Sluice valves of approved make (IS: 14846- 2000- amended upto date- For Sluice Valve) PN 1.0 class and CI Tail Piece- 2 Nos. (IS: 5531- 1988- amended up to date- For CI Plane Ended Specials) of same size of following dia completeincluding all material like Instren Rubber Sheet of thickness- 6.00 mm(ISI Mark)- For Rubber Sheet), MS Nut Bolts(IS: 1363 Part I-1984- amended up to date), CI Detachable Joint (IS: 8794- 1988 amended up to date), labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer. (Nominal Dia. in mm)150 mm dia
236	Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed within a lead of 50 meter for pipe line work. In All kinds of soil.
237	Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering All up to plinth level 1:4:8 (1Cement: 4 Course Sand: 8 Graded stone aggregate 40 mm nominal size (Crusher Broken)
238	Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering All up to plinth level 1:2:4 (1Cement: 2 Course Sand: 4 Graded stone aggregate 20 mm nominal size)
239	Brick masonary in foundation and plinth with bricks of class designation 75 mm in Cement Mortar 1:4 (1-Cement:4-coarse sand).
240	Plaster on new surface on walls in cement sand mortar 1:4 including raking of joints etc. complete fine finish:12 mm thick.
241	Operation & Maintenance of Scheme for 2 Year
242	Operation and maintenance of pumping machinery including repairing of pump sets, electric panel, suction and delivery system up to pumping main complete in all respect (If pump sets have been supplied & installed by the contractor):-For 1st year (Only operation)
243	Operation and maintenance of water supply schemes. This includes operation of pump sets, repairing of pipe line, patrolling of raw water conveyance system to fill raw water storage tanks, O&M of filter plant to maintain water supply, periodical cleaning of Head works and allied units. (Repairing of pump sets panels etcwill be carried out by department and material for maintenance of pipe line will be provided by department) :-When 4 persons are required for O&M of scheme.

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Rajasthan Tenders

Construction Tenders

Water Storage and Supply Tenders

Water Supply Project Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Work For Rejuvenation / Revamping Of Rural Water Supply Scheme 18 Sd Under Sub Div. Srivijaynagar, Srivijaynagar-Rajasthan

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Work For Rejuvenation / Revamping Of Rural Water Supply Scheme 18 Sd Under Sub Div. Srivijaynagar, Srivijaynagar-Rajasthan

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us