Military Engineer Services-MES has published Repairs To Flooring, Tiling, Sanitary Fittings, Plumbing, Pvc Tanks, Sunken Treatment, Steel, Wooden Joinery, Aluminium Doors / Window , Partition, False Ceiling, Roof Treatment, Certain Br Works At Dgqa Area Under Age B / R ( S ) No.Ii Of Ge ( S. Submission Date for this Tender is 06-09-2021. PVC Tank Tenders in Secunderabad Telangana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 25-Aug-2021 | Revised BOQ | BOQ | 06-09-2021 |
| 2 | 28-Aug-2021 | Revised BOQ 2 | BOQ | 06-09-2021 |
| Sl. No. | Item Description |
| 1 | Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified & directed. |
| 2 | M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.50mm graded stone aggregate) finished fair & even as in Sub base flooring complete all as specified & directed. |
| 3 | M&L for glazed ceramic tiles, coloured, of size 350 x 250 x 7mm , as in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified & directed. |
| 4 | M&L for Non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors surface set and jointed in neat cement slurry and pointed with whiteor colour cement to matchover and including 15mm thick screed bed in cement mortar 1:6 complete all as specified & directed. |
| 5 | M&L for Vitrified ceramic tiles dark shade 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqmin floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified & directed. |
| 6 | M&L for Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqmin skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl10mm thick rendereringin CM 1:4 complete all as specified & directed. |
| 7 | M & L for 18 to 20 mm thick Granite (of any type)tiles machine cut in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thik rendering in CM 1:4 complete all as specified & directed. |
| 8 | M & L for 18 to 20mm thick Granite (of any type)tiles machine cut beddedand jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thik screed bed in CM 1:6complete all as specified & directed. |
| 9 | Rounding to edges of stones slabs one edges,such as in steps, cooking platforms and similar situations all as specified and directed. |
| 10 | Cleaning and removing all scale and dirt, etc, from tanks of capacity exc 250 lit n exc 500 lit and from mouths of circulating pipes, etccomplete all as specified and as directed |
| 11 | Cleaning and removing all scale and dirt, etc, from tanks of capacity exc 500 lit n exc 1000 lit and from mouths of circulating pipes, etccomplete all as specified and as directed |
| 12 | S&F rotational moulded polyethylene water storage tanks 500 litre capacityincl(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I including dismantling and taking down existing water tank complete all as specified & directed. |
| 13 | S&F in repair rotational moulded polyethylene water storage tanks 1000 ltrs(cylindlerical vertical with closed top) hoisted and fixed in position all as specified in SSR part I inclding dismantaling of existing damaged water tanks complete all as specified & directed. |
| 14 | S&F 20 mm dia gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe as in repairs complete all as specified & directed. |
| 15 | S&F Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball for new tanks screwed for iron pipe and fixed (minimum weigth 455gms) 20mm bore complete all as specified & directed. |
| 16 | S&F Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weigth 455gms) 20mm bore in repairs complete all as specified & directed. |
| 17 | S&F 15 mm bore tubes medium grade, galvanized with all fittings and fixed complete to walls and ceiling or laid in floors in cluding its taking down complete all as specified & directed |
| 18 | S&F 20mm bore tubes medium grade, galvanized with all fittings and fixed complete to walls and ceiling or laid in floors in cluding its taking down complete all as specified & directed |
| 19 | Demolition of cement concrete in ground floor and paving exc 15 cm thickness below and above ground level |
| 20 | M&L rendering 15mm thick in CM 1:3 on brick work or concrete surfaces, mixed with integral water proofing compound as per manufactures instructions, finished the surface even and smooth without using extra cement and applying evenly a tack coat ofprimer at the rate of 0.30 Kg/Sqm including cleaning the surfaces thoroughly from dust and dirt and lay water proofing treatment withApp modifed felt havingwith glass fiber non woven reinforcement 150 Grm/ sqmand weighing 3.0 Kgs/Sqm in 100mm overlaps both longitudinally and transversely by torch bounding over a coat of blown bitumen 85/25 @ 1.2 Kgs/Sqm on top of felt as in sunken floor (bottom and vertical) complete all as specified and as directed.(Note : Supply of water proofing compound will be measured and paid separately .) |
| 21 | M&L for PCC 1:4:8 type D-2 using 40 mm graded brick aggregate as in filling of sunken portion etc complete all as specified and directed. . |
| 22 | S&FHigh density polyethylene pipe (HDPE) 40mm bore of pressure rating 6kg/cm2 fixed to wall, ceiling or laid in floor etc complete all as specified and directed. |
| 23 | S&F in repar 15 mm bore stop valves, fancy type ,cast copper alloy chromium plated with long shank and cup (Concealed type), screwed down high pressure , with crutch or butterfly handle , screwed both ends for iron pipe or for unionsall as specified and directed. |
| 24 | S&F in repairs Angle stop valve of15mm dia standard of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-90gms)complete all as specified & directed. |
| 25 | S&Fin repar15mm boreChromium plated Bib taps, castcopper alloy withcrutch or butterfly handle, screweddown, screwed foriron pipe or for brass ferrule and fixedin repairs complete all as specified & directed |
| 26 | S&F in repair 15mm bore pillar tap cast copper alloy with capstan head ,chromium plated screwed down high presure with or with out lettered fixed with iron pipe complete all as specified & directed. |
| 27 | S&F125 mm size fixed in repairsbrass chromium plated shower roses /shower arms with or without swivel jointsincluding fixing to steel pipe or union of 15mm dia |
| 28 | S&F PVC ( SWR) floor trap,75mm outletdiaplain with grating includingjoining with solvent cement all as specified and directed |
| 29 | M&L for salt glazed stoneware gully traps ofsize 150mm x 150 mm, square or round mouthed , type "P" includingsetting and jointing to drains with cement mortar 1:1complete all as specified |
| 30 | S&F for PVC (SWR) gully trap of I25/110 mm dia set and jointing wilh solvent cement complete all as specified and directed. |
| 31 | S&F 75mmborePVC (SWR) pipessingle socketed, in any length fixed to walls/laid in floors/trenches all as specified and directed |
| 32 | S&F PVC (SWR) pipes of 110mm dia single socketed in any length with rubber ring jointsinclincl all fittings heads, shoes bends etc all as specified and as directed by Engr in Charge. |
| 33 | S&F straps, supports or stays for rainwater, ventilating pipes, including bolts, if requiredwith MS Flat Ironbracketsfor fixing PVC (SWR) pipes of 110mm dia single socketed in any length with@ 2.0 mtr interwellfixed to walls complete all as specified and directed.. |
| 34 | S&Fin repairWHB vitreous china (flat back or angle back type ) ,including cutting for pinning in ends size 550x400 mm including brackets ,waste pipe ,coupling ,PVC connection pipe and CP piller tap complete. |
| 35 | S&F in repairs Bib taps 15mm standard of PTMT and any colour screwed for iron pipe complete all as specified & directed |
| 36 | S & F in repair Vitreous china Squatting panOrissa pattern of size 580mx440mm white with integral foot rests (excluding flushing cistern and flush pipe) complete including concrete bedding complete. |
| 37 | S&F in repairs wash down water closet (pedestal pattern) white withplastic water closet seat cover closed pattern incl P or S trap with flat bottom and mild steel chromium plated or aluminised hinging device and flush pipe of low density PVC 32mm dia for low level flushing cistern complete |
| 38 | S&F in repairs stop cock 15mm dia standard of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-90gms)complete all as specified & directed. |
| 39 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 450 mm |
| 40 | S&F in repair 600mmx450mm belvelled edge looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood with pvc / alluminium frame and fixed to wooden plugs with chromum plated brass screws cup washers. |
| 41 | S & F in repairPVC valveless syphonic action type low levelflushing cistern 10 Ltr capacity with inlet, ball valve, float and handle incl brackets and flush pipe of polyethylene of low or high density PVC. 32 mm dia all as specified and directed |
| 42 | S&F in repairtwo way bib cock/tap 15 mm chromium plated completefancy type of branded as specified and directed." |
| 43 | S&F in repairsPVC cabinet with door fitted with looking mirror size 422mm x 622mm (Make: Prayag cat no : 555 Or Equivalent) all as directed by Engr-in-charge. |
| 44 | S & F Towel barcromium plated incl all fitting & fixtures complete all as specified(Make : Hindware Cat no : F450024 Or Equivalent) all as directed by Engr-in-charge. |
| 45 | S & F UrinalComplete set incl all fitting & fixtures complete all as specified(Make : Hindware Cat no : 96008 Or Equivalent) all as directed by Engr-in-charge. |
| 46 | S & F Wall Mixture cromium plated incl all fitting & fixtures complete all as specified(Make : Hindware Cat no : F320011 Or Equivalent) all as directed by Engr-in-charge. |
| 47 | S & F Wash Basin with Pedestal Complete set incl waste pipe ,pillar cock,waste coupling and all fitting & fixtures complete all as specified(Make : Hindware Cat no : 10098 Or Equivalent) all as directed by Engr-in-charge. |
| 48 | S & F Soap Holder (Brass)incl all fitting & fixtures complete all as specified(Make : Hindware Cat no : F840004 Or Equivalent) all as directed by Engr-in-charge. |
| 49 | S & FHealth faucet cromium plated incl all fitting & fixtures complete all as specified(Make : Hindware Cat no : F160001 Or Equivalent) all as directed by Engr-in-charge.) |
| 50 | S & F Bip cock cromium platedincl all fitting & fixtures complete all as specified(Make : HindwareCat no : F320004 Or Equivalent) all as directed by Engr-in-charge. |
| 51 | S & F Paper Holder with cover cromium plated incl all fitting & fixturescomplete all as specified(Make : HindwareCat no : F840009 Or Equivalent) all as directed by Engr-in-charge. |
| 52 | S & F wash down water closet (pedestal pattern) of size 69 x 36 x 64 cm white Model R10* complete incl all fitting & fixtures complete all as per cat No Cat no : 92520 S-30 specified(Make : Hindware Or Equivalent) all as directed by Engr-in-charge. |
| 53 | Demolition of cement concrete of any description and in any position not otherewise specifically provided including removal of old treatment of any description complete all as specified and directed. |
| 54 | M&L for PCC 1:2:4 type B1 using 20mm graded aggregate as in padding (level course) on roof surface averaging 40mm thick etc complete all as specified anddirected. |
| 55 | M&L for rendering 10 mm thick in CM 1:3 mixed with integral water proofing compound as per manufacture"s instructions as in roof and chajjas, finished the surface fair and even with out using extra cement.(Note :1. 400 Sqm with WPC and 50 Sqm without WPC. 2. Supply of water proofing compound will be measured and paid separately .) |
| 56 | M&L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horicontal face of groove with cement mortar 1:3 complete all as specified anddirected. |
| 57 | M&L for Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified anddirected. |
| 58 | M & Lfor priming plastered roof surfaces with bituminous primer @ 0.3 kg/sqm as per IS-3384 andover the primer applyhot bitumen VG - n30 @ 1.20 Kg/ sqmand providing APP Membarane water proofing treatment by applying mineral finish 3.5 kgs/Sqm Actatic Polyprofhylene (advanced aPP torch on membrane mineral finish)having polyster film reinforcement stablised with fibre glass and finished on top with grey mineral slaltes troch on system of thickness 3.00 mm by torch bonding complete all as directed and as specified. |
| 59 | Supply only integral water proofing compound. |
| 60 | Dismantling of asbestos cement/galvanium sheet (corrugated or semi corrugated) sheets in roof covering. |
| 61 | Dismantling wrought iron or mild steel work of any description not otherwise provided for as directed and specified by Engr-in-Charge |
| 62 | M&L pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 63 | S&F MS rolled section angle/square conduit/flat iron of any size as in purlins, Column, rafter, windtie connected to common rafters fixed with angle cleats with necessary bolts & nuts and other connecting materials required to connect complete all as directed. |
| 64 | M&L Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 65 | M&L Preparing old steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete and removing old paint by paint removers or burning off by blow lamps and cleaning with scrapers, any number of coats, any width or girth all as specified and directed. |
| 66 | Demolation of Brick or stone masonry built in cement mortar. all as specified and directed. |
| 67 | M/L brick work with sub class B bricks built in CM 1:6 straight or curved exceeding 6m mean radius all as specified. |
| 68 | Taking down cement plaster on brick or stone masonry wall/celingetc incl racking out joints haking for key, scrubbing down with water etcall as specified and directed. |
| 69 | M&L for rendering 15mm thick plaster in two layers (10mm dubbing coat and 5mm thick finishing coat with chicken wiremesh )inCM 1:4 on fair faces of brick/concrete finished even and smooth without using extra cementincltaking down cement plaster on brick or stone masonry wall etc incl racking out joints haking for key, scrubbing down with water etcNOTE :- (Chicken wiremesh will be measured and piad seperately) |
| 70 | S & F Chicken WiremeshSizeand dia of the wire as specified by Engr-In-Charge. |
| 71 | M&L for rendering 15mm thick plaster inCM 1:4 on fair faces of brick/concrete finished even and smooth without using extra cementcomplete all as specified and as directed. |
| 72 | M/L rendering 15mm thick in two layer ( 10 + 5 mm) CM 1:4 on fair facesof brick or concrete surface II nd layer 5 mm thickwith 3% of Water Proofing Compound and finishing thesurfaceseven and smooth without using extra cement in patch work at various places upto height 7.50m incl necessary formworkcomplete all as specified & directed. (Note : WPC Shall be measured and paid seperately) |
| 73 | M & L for 10 mm thick rendering in Cement Mortar 1:4 onsoffit of slab/sun shade of Concrete surfaces and finishing even and fair without using extra cement. complete all as specified and as directed. |
| 74 | M&L for applying two coats of Dr Fixit Rain coat overOr Equivalent)acoat ofprime seal primer incl preparation of newly plastered surface of wallcomplete all as specified and directed.. |
| 75 | M&L for applying three coats ofwhite wash incl preparation of newly plastered surface of ceilingcomplete all as specified and directed.. |
| 76 | M&L for applying three coats ofwhite wash incl preparation of newly plastered surface of walls including puttycomplete all as specified and directed.. |
| 77 | M&L for preparation of new plastered surfaces of wall applying two coats of OBD over one coat of primer incl 2mm thick birla white putty,complete all as specified and directed. |
| 78 | M&L for preparation of new plastered surfaces of wall applying two coats of cement base paint over one coat of primer incl 2mm thick birla white putty,complete all as specified and directed. |
| 79 | Dismantling of wall and ceiling boards (fibre pulp insulation etc) or insulation boards / slabs /blankets any thickness, including cover fillets. |
| 80 | M&L for providing false ceiling with anodised aluminium snap grid frame work for false ceiling completeincl Hangers 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means ofceilling cleats made out of G.I.flat 40 x 3 mm size 60mm longand expansion hold fasteners12.5mm dia. 40mm longcomplete all as specified all as sepcified and directed by Engr-In-Charge. |
| 81 | S&F 4mm thick ofNon asbestos fibre cement buildingDesigner E boards fixedto Aluminium framework in ceilingwith screws complete all as specified and directed by Engr-In-Charge. |
| 82 | S&F 12.5 mm thick gypsum board seamless false ceiling fixed with standard GI section such as channels, angles the grid suspended with GI suspender and cleat from soffit of slab with expension fasteners. Gypsum board shall be fixed with screwe to the ceiling section/grid. The board shall be 12.5mm thick and the soffit of board shall be finished with gypsum plaster and levelled to give flush look as per manufactcurer"s instructions incl necessary cutting for light fitting and AC and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. . |
| 83 | Taking down shutters of any description exc. 1.00 Sq.m and n.exc. 2.00 Sq.m each. |
| 84 | Taking down Chowkats with shutters (Without taking off shutters from frame) area exc 1.5 Sqm but not exc 4.00 Sqm |
| 85 | Taking down Chowkats with shutters (Without taking off shutters from frame) n exc 1.5sqm each complete |
| 86 | S&F of 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed |
| 87 | S & F Solid PVC Door Frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube,supplying and fixing in opening as per manufacturers instructions and as directed by Engineer-in-Charge. |
| 88 | Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2, raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, with paticle board coresupplying & fixing in frame at site as per specification & drawing |
| 89 | S&F 35mm thick plain factory made framed panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply The size of rail and stile as per IS 1003 (Part-I Kiln seasoned and chemically pressure treated complete all as specified. |
| 90 | S & F, 35mm thick, 2nd class hardwood glazed & skelton shutters, open rebated & prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I section 8 clause 8.20 (a). |
| 91 | S&F 35 mm thick flush shutters , solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 92 | M&L in repairs for prelaminated particle board of 18/19mm thick interior grade prelaminated one side with deocrative choice lamination & other side balancing white lamination fixed with timber frame work of cupborads book cases etc completle all as specified and as directed. |
| 93 | S&F100mm longstain less steel Butt hinges,fixed complete all as specified and as directed. |
| 94 | S&F 100mm longMS Medium weight Butt hinges cold rolled ,fixed complete all as specified and as directed. |
| 95 | S&F 75mm longMS Medium weight Butt hinges cold rolled ,fixed complete all as specified and as directed. |
| 96 | S&F100mmlong Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 97 | S&F150mmlong Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 98 | S&F 200mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 99 | S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedcomplete all as specified and as directed.. |
| 100 | S & F 300mm long MS ordinary rat tail rod pattern springs inc. roller & roller plate complete all as specified and as directed. |
| 101 | S & F 150mm long floor door stopper of aluminium alloy boly and tongue anodised with hard steel spring fixed in floor complete all as specified and as directed. |
| 102 | S&F 3mm thick sheet glass ordinary quality fixing with putty in square not exceeding 0.5 Sqm in each pane.complete all as specified and as directed. |
| 103 | S&F in repair 3mm thick sheet glass ordinary quality fixing with putty in square not exceeding 0.5 Sqm in each pane. Incl hacking out old broken glass complete all as specified and as directed. |
| 104 | Taking down steel/aluminium /windows, /doors, of any size with/withoutframe and shutters and including with all connected accessories complete. |
| 105 | S & F Aluminium anodized frame with Powder Coating to (minimum thickness of powder coating 50 micron) work for door / windows / ventilators with one or more rebates including joining heat for fixing etc complete all as specified |
| 106 | S & F anodized door shutters, aliminium section weighting 0.55 Kg/M including necessary joinging cleats, galzing clips, ruber neoprene pakcing handles 2 Nos in each door, hinges anodised aliminium snap beading screws etc, complete all as specified |
| 107 | S&F anodied aluminium window and ventilator shutter ,side hung type without sash bars aluminium sections weighing 0.55 kg/m including necessary joining cleats ,glazing clips rubber packing anodised aluminium snap beading ,screws,anodised aluminium fitting suchas peg stays 150 mm long (1 no),hinges typeB-21 100mm long (2 nos) suitable handle (1no) complete all as specified. |
| 108 | S&FAlum (die cast) body door closure hydraulically regulated disignatin No 3 universal type suitablefor door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed all as specified and directed. |
| 109 | S&F in repair Alum (die cast) bodyoor closure hydraulically regulated disignatin No 3 universal type suitablefor door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed all as specified and directed. |
| 110 | S&F 5.5 mm thick sheet Glass ground or obscured or frosted on one side selected quality and glazing with oil putty in square exc 0.50 Sqm in each panecomplete all as specified and directed by Engr-in-charge |
| 111 | S&F 4 mm thick sheet Glass ground or obscured or frosted on one side selected quality and glazing with oil putty in square exc 0.50 Sqm in each panecomplete all as specified and directed by Engr-in-charge |
| 112 | S & F prelaminated particle board 9mm thick interior grade pre laminated one side with decorative choice lamination and other side balancing white lamination fixed with screws. |
| 113 | S & F brass Mortice lock 4 leavers vertical type size 100mm complete all as specified and as directed.. |
| 114 | S&F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with galvanised wire staples.complete all as specified and as directed. |
| 115 | S&F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with galvanised wire staples fixed in repairs.complete all as specified and as directed. |
| 116 | S & F, steel windows with side hung shutters including projecting type hinges with steel handle & steel peg stay, complete with glazing bars, dovetailed or welded including taking down the old window. |
| 117 | S&F, steel windows with side hung shutters including projecting type hinges with steel handle & steel peg stay, complete without glazing bars, dovetailed or welded including taking down the old window. |
| 118 | S&F MS Framed work such as grills or grattingetc with ends of bars welded of any size and any design all as directed of Fe 290 Grade E-165.complete all as specified and as directed. |
| 119 | M&L Preparatioin of new wooden surfaces of any description over 10CM width or girth and applying two coats of synthetic enamel paint over a coat pink primer.complete all as specified and as directed. |
| 120 | M &L Welding in repairs to the thickness exc 6mm but n. exc 9mm steel section, welded length n. exc 2.5 cm in each lengthetc all as directed by Engineer-in- charge. |
| 121 | S & F aluminium daco Grills (DG 104) with F section Channel complete of 4mm thick for windows of aperture 50 mm complete all as spd and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
