Various Repair Work In The Subdivision Officer Residence- 1 Providing & Fixing Mica Of Approved Make For Inner / Outer Side Of Shutters With Fevicol & Nails Completeas Per Approved By Engineer In Charge.0.8Mm Thick Mica 2 Providing And Fixing Curtain R, JHALAWAR-Rajasthan

Various Repair Work In The Subdivision Officer Residence- 1 Providing & Fixing Mica Of Approved Make For Inner / Outer Side Of Shutters With Fevicol & Nails Completeas Per Approved By Engineer In Charge.0.8Mm Thick Mica 2 Providing And Fixing Curtain Rods Of 1.25 Mm Thick Chromium Plated Brass Plate, With Two Chromium Plated Brass Brackets Fixed With C.P. Brass Screws And Wooden Plugs, Etc., Wherever Necessary Complete:20 Mm 3 Flyash Flyash Brick Work With Flyash Flyash Bricks Of Class Designation 75 In Superstructure Above Plinth Level Upto Floor Three Level In All Shapes And Sizes In :Cement Mortar 1 : 4 ( 1 Cement : 4 Coarse Sand ) 4 Plaster On New Surface On Walls In Cement Sand Mortar 1:4 Including Rackingofjointsetc. Complete Fine Finish :20Mm Thick . 5 Providing Gola 75X75 Mm In Cement Concrete 1:2:4 ( 1 Cement : 2Coarse Sand : 4 Stone Aggregate 10Mm And Down Gauge ) Includingfinishing With Cement Mortar 1:3 ( 1 Cement : 3 Fine Sand ) As Per Standard Design : 6 Providing & Fixing Of Ward Robe Shutters Made Out Of 19Mm Thick Bwp Block Board Isi Of Superior Quality Make. Front Side Finishing With 4Mm Thick Teak Veneer Approved Make And 0.8Mm Thickapproved Shade Mica In The Inner Side. Covering With Teak Wood Beading 25X12mm All The Sides Of Shutter & 35X12mm On Outer Frame For Making Good The Wall Joint Including Heavy Brass S.S. Fittings ( Handle 200Mm 2 Nos., Tower Bolt 150Mm 2 Nos., Brass Lock 1 Nos., Magnetic Catcher 2 Nos., Brass Hinges 75X40x2.5 Mm 6 Nos., Ss Hanger Rod 20Mm Dia ) Complete With Melamine Polishing As Per Drawing And Design Approved By Engineer In Charge. 7 Providing And Applying White Cement Based Puttyover Plastered Surface To Prepare The Surface Even And Smooth Complete 8 Providing And Laying Damp-Proof Course With Cement Concrete Grade M-150 ( 1 : 2 : 4 ) Mortar Prepared With 1% Solution Of Water-Proof Compound Complete As Per Specification .75Mm Thick. 9 Polished Blue Kota Stone Slab In Steps, Walls, Pillars Having Fine Machine Cut Edges Laid On 12 Mm ( Av. ) Thick Cement Mortar 1 : 3 And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab, Including Rubbing And Polishing Complete ::For Area Of Each Slab From 2001 To 5000 Sq.Cm :30 Mm Thick Slab. 10 P&F Rigid Pvc Pipe ( Is:4985 Mark ) Class Ii / ( 4 Kg. / Cm2. ) Approved Quality / Makeincluding Joining The Pipe With Solvent Cement Rubber Ring And Lubricant. ) .110 Mm Dia 11 Providing And Fixing Steel Gate, Grating , And Grills Made Of Angles, Tees, Square Bars, Flats, Or Black Pipe With Holdfast And Fittings Complete As Per Design And Drawing Including Cutting Welding And Fabrication With Priming Coat Of Red Oxide 12 S&F Fixed Wire Gauge Of Stainless Steel Of 14 Mesh X 24 Gauge To The Aluminium Window By Aluminium Beading 20X3mm With Suitable Screws At Not Exceeding 150Mm Distance At All Heights With All Lead And Lift With Scafolding. 13 Providing And Applying Acrylic Emulsion Polymer Waterproofing Chemical Coating, On Over Roof On Over Roofslabs / Terrace / Balconies / Parapet Wall Etc.With Following Method / Specification:Paint The Surface With Regular Paint Brush So As To Obtain Approximately 0.3Mm Thickness Coating. Apply The 2Nd Coat Next Day At Right Angles To The 1St Coat So That Total Thickness Of The Coating Should Be Approximately 0.6Mm Coverage By Using Above Formulation Will Be 40 Ft2 / Litre Of Chemical. Painted Surface Does Not Require Any External Water Curing Since Chemical Will Hold Sufficient Water For Curing.After The Primer Coat Apply 2 Coats Of Modified Acrylic Emulsion Polymer Water Proofing Compound Having Solar Heat Reduction Properties Coating @ 0.330 Kg / Sqm On The Surface Of The Interval Of 3-4 Hours. Undulation On The Surface Is Repair Before The Waterproofing Work. 14 Distempering With 1St Quality Acrylic Washable Distemper ( Ready Mixed ) Of Approved Manufacturer And Of Required Shade And Colour Completeincluding All Scaffolding As Per ManufacturerS Specification. Two Or More Coats On New Workincluding Prepartion Of Base With Primer, Putty, Lippy Etc Complete In All Respect. 15 Finishing Wall With Water Proofing Cement Paint Of Approved Brand And Manufacture And Or Required Shadetogive An Even Shade Including All Scaffolding:Old Work ( One Or More Coats ) . 16 Repair To Cement Plaster In Cement Mortar 1 : 6 ( 1 Cement : 6 Fine Sand ) Including Removal Of Old Plaster In Regular Shape And White Or Colour Washing. 17 Providing And Fixingsuperior Quality ( Jaguar Contiental ) Cp Brassfittings Complete As Per Direction Of Eihand Shower With 8 Mm Dia 1 Mt Long Pvc Tube & Wall Hook Complete 18 Providing And Fixingsuperior Quality ( Jaguar Contiental ) Cp Brassfittings Complete As Per Direction Of Ei Long Body Bib Cock 15 Mm Nominal Size 19 P & F Pilllar Cocks ( Is :8934 Mark ) Of Superior Quality And Approved Makec.P. Pillar Cock, Swan-Neck With Casted Spout, 15Mm Nominal Bore. 20 Providing And Fixinganodised Aluminium Work ( Anodizing To Be Got Done From Approved Anodizer ) For Doors, Windows, Ventilators And Partition With Extruded Built Up Standard Tubular And Other Sections Of Approved Make Confirming To Is : 733 And Is : 1285 Anodised Transparent 81 Dyed To Required Shade According To Is : 1868. ( Minimum Anodic Coating Of Grade Ac 15 ) , Fixed With Rawl Plugs And Screws Or With Fixing Clips, Or With Expansion Hold Fasterners Including Necessary Filling Up Of Gas At Junctions, At Top, Bottom And Sides With Required Pvc / Neoprene Felt Etc.; Aluminium Section Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, Al. Tower Bolt & Al. Handle & Al. Aldrop Etc. All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. ( Glazing And Paneling To Be Paid For Separately ) . For Fixed Portion 21 ------ Do--------- For Shutters Builtup Standard Tubular Sections Of Openable Doors , Windows & Ventilators Including Providing & Fixing Hinges / Rollers Etc. And Making Provision For Fixing Of Fittings Wherever Required ( Lockes Shall Be Paid For Separately ) . 22 Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Pvc / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge ( Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item ) .With Glass Panes Of 4.0 Mm Thickness ( Weight Not Less Than 10.0 Kg. / Sqm ) As Per Is : 2835. 23 Providing And Fixing Expanded Grill Made Of Anodised Aluminium As Per Design And Drawing Having Members Section Of Size 7.5 Mm X 6.0 Mm And Opening Of Size 102 Mm X 99 Mm To Aluminium Window / Vent With Required Screws, Y And H Aluminium Sec ( As Per Drawing ) At The Ends And Middle Joints Respectively Complete In All Respect As Per Direction Of Engineer In Charge.

INR 500 /-

Refer document

INR 3.30 Lakhs /-