Jtp Office Nicnet Centre Providing Additional Amenities To The Old Jtp Office Situated In Second Floor (North-West Corner) In Connection With Shifting Of Nicnet Centre From Regional Administrator Office In Yanam
Tender Value
2.81 Lakhs
Estimated cost
Bid Submission
20 Aug 2021
0 days left
EMD
5637
Bank guarantee accepted
Document Fee
525
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Yanam → Andhra Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Jtp Office Nicnet Centre Providing Additional Amenities To The Old Jtp Office Situated In Second Floor (North-West Corner) In Connection With Shifting Of Nicnet Centre From Regional Administrator Office In Yanam
BOQ
| Sl. No. | Item Description |
| 1 | 5.15 Providing , hoisting and fixing upto floorfive level precast reinforced cementconcrete in lintels, beams, and bressumers including setting in cement mortar 1:3 (1cement : 3 coarse sand) , cost of requiredcentering and shuttering but excluding thecost of reinforcement with 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). |
| 2 | 5.22.7 Steel reinforcement for R.C.C.work including straightening , cutting , bending , placing in position and binding allcomplete upto plinth level -Thermo- Mechanically treated bars (ISI BRAND OF APPROVED MAKE) Fe - 415 or more |
| 3 | 6.13.2 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in superstructure above plinth level upto floor V level - cementmortar 1:4 (1 cement : 4 coarse sand). |
| 4 | 6.14 Extra for half brick masonry insuperstructure , above floor five level for every four floors or part thereof by mechanical means. |
| 5 | 9.46.3 Providing and fixing curtain rods of 1.25mm thick chromium plated brass plate , withtwo chromium plated brass brackets fixedwith C.P.brass screws and wooden plugs , etc., wherever necessary complete - 25mmdia. |
| 6 | 9.119 Providing and fixing factory made P.V.C. door frame of size 50x 47 mm with a wall thickness of 5mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 nos of 150mm longbrackets of 15 x15 mm M.S. square tube, the vertical door frame profiles to bereinforced with 19 x19 mm M.S.square tube of 19 gauge , EPDM rubber gasket weather seal to be provided through out the frame . The door frame to be fixed to the wall using M.S.screws of 65 / 100 mm size, complete as per manufacturter\"s specification. |
| 7 | 9.124.1 Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm X 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integarally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mm x 1mm, painted with primer ,all four corners of reinforcement to be welded or sealed .Solid PVC extrudedbidding (push fit type) will be set inside the styles and the rails with a cavity, to recive single piece extruted 5 mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm X 30 mm with wall thickness 5 mm &15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement and self driven self tapping screws of size 100 mm x 8 mm complete as per manufacturer’s specifications - Non decorative finish. |
| 8 | 9.71.1 Providing and fixing IS : 12817 markedstainless steel butt hinges (heavy weight) with stainless steel screws etc. complete - 125 X 64 x 2.50 mm. |
| 9 | 9.92.1 Providing and fixing chromium plated brass handles with necessary screws etc complete -125 mm. |
| 10 | 9.96.2 Providing and fixing aluminium sliding doorbolts , ISI marked , anodised ( anodiccoating not less than grade AC 10 as per IS: 1868), transparent or dyed to requiredcolour or shade , with nuts and screws etc complete- 250 X 16 mm. |
| 11 | 9.97.1 Providing and fixing aluminium tower bolts, ISI marked , anodised (anodic coating not less than grade AC 10 as per IS :1868) , transparent or dyed to required colour or shade , with necessary screws etc. complete - 300 x10 mm. |
| 12 | 9.84 Providing and fixing aluminium extrudedsection body tubular type universalhydraulic door closer (having brand logo with ISI, IS : 3564 , embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) , with double speed adjustment with necessary accessories and screws etc. complete. |
| 13 | 11.63.2 Providing and fixing homogeneous Polyvinyl chloride tile in flooring and skirting in approved pattern on a smooth and damp proof base using rubber based adhesives ofapproved quality including rolling withlight wooden roller weighing about 5 kg.All complete - 1.5 mm thick tiles |
| 14 | 13.2.2 15mm cement plaster on the rough side of single or half brick wall of mix - 1:6 (1cement : 6 fine sand). |
| 15 | 13.48.1 Finishing with deluxe multi surface paint system for interiors and exteriors using primer as per manufacture\"s specification -Two or more coats applied on walls @ 1.25ltr / 10 sqm over and including one coat ofspecial primer applied @ 0.75 ltr / 10 sqm |
| 16 | 1.14.2 Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor , single core cable in surface / recessed medium class PVC conduit as required - 2 X 2.5 sq.mm + 1 x 2.5 sq.mm earth. |
| 17 | 1.14.1 Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor , single core cable in surface / recessed medium class PVC conduit as required - 2 X 1.5 sq.mm + 1 x 1.5 sq.mm earth. |
| 18 | 1.14.3 Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor , single core cable in surface / recessed medium class PVC conduit as required - 2 X 4 sq.mm + 1 x 4 sq.mm earth wire |
| 19 | 1.27.6 Supplying and fixing following size / modules , GI box alongwith modular base & cover plate for modular switches in recess etc. as required - 12 module (125 mm x 125 mm). |
| 20 | 1.23.3 Supplying and fixing following piano type switch / socket on the existing switch box /cover including connections etc.as required - 2 way 15/16 A switch |
| 21 | 1.23.5 Supplying and fixing following piano type switch / socket on the existing switch box / cover including connections etc.as required - 6 pin 15/16 A socket outlet. |
| 22 | 1.23.4 Supplying and fixing following piano type switch / socket on the existing switch box / cover including connections etc.as required - 3 pin 5/6 A socket outlet, piano type ISI marked. |
| 23 | 1.23.1 Supplying and fixing following piano type switch / socket on the existing switch box / cover including connections etc.as required - 5/6 A switch. |
| 24 | 2.15.3 Supplying and fixing following rating , four pole , (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc.as required - 63 A. |
| 25 | Basic Code No.1408 Providing and fixing Stepped type Modular Fan regulator (2 module) etc complete as directed by the Engineer-in-charge. |
| 26 | Basic Code No.1708 Providing and fixing 6 A to 32 A ratings, DP MCB, \"C\" curve, 10kA breaking capacity etc complete as directed by the Engineer-in-charge. |
| 27 | Basic Code No. 3129.O Providing and fixing 300mm 1400 rpm heavy duty exhaust fan make Almonared/Usha etc complete as directed by the Engineer-in-charge. |
| 28 | 1.50.1 Installation of exhaust fan in the existing opening, including per making good the damage, connection, testing commissioning etc.as required - Upto 450 mm sweep. |
| 29 | NON-PSR Supplying and fixing of 4 star or above rated wall mountable split type 2 Ton Capacity A.C. unit as per IS 1391 (part 2) with following specifications. Material for body for indoor unit: ABS, normal cooling capacity room discharge Air flow (cum/Hr) 700, Air conditioner shal be suitbable for 230 V, 50 Hz operation and capable of filtering and conform to IS 10617 part (1) -1983. |
AI Tender Summary
Tender Timeline
Aug 13, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedAug 20, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 23, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender