Construction Of Additional Accommodation For Chc Building At Baldwara, District Mandi H.P Ground Floor Sh Providing E.I Therein Construction Of Additional Accommodation For Chc Building At Baldwara, District Mandi H.P Ground Floor Sh Providing E.I There
Tender Value
8.80 Lakhs
Estimated cost
Bid Submission
20 Aug 2021
0 days left
EMD
17650
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baldwara → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Additional Accommodation For Chc Building At Baldwara, District Mandi H.P Ground Floor Sh Providing E.I Therein Construction Of Additional Accommodation For Chc Building At Baldwara, District Mandi H.P Ground Floor Sh Providing E.I Therein
BOQ
| Sl. No. | Item Description |
| 1 | Wiring for light point / fanpoint /exhaust fan /call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. i) Group c.Cable make : PLAZA /FINOLEX / UNITECH / BONTON / KEI / BIYANI / GEMSCAB / CMI . |
| 2 | Wiring for light point / fanpoint /exhaust fan /call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. i) Group c.Cable make : PLAZA /FINOLEX / UNITECH / BONTON / KEI / BIYANI / GEMSCAB / CMI . |
| 3 | Supplying and fixing metal box of 100mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps, piano type switch, connections, painting etc. as required. Make- ESS ESS KAY / CONA /Anchor |
| 4 | Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps, piano type switch, connections, painting etc. as required.Make- ESS ESS KAY / CONA /Anchor |
| 5 | Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:- Make- ESS ESS KAY / CONA /Anchor |
| 6 | Supplyinganderection of 6amps. to 32 amps. rating, 10 KA breaking capacity, 240volts, \"C\" curves, miniaturecircuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-Make :L&T / Legrand / ABB / SIEMENS. i) Single pole. Cat-A. |
| 7 | Supplyinganderection of 40/50/63 amps rating, 10 KA breaking capacity, 240volts, \"C\" curves, miniaturecircuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- i) Double pole. Cat-A.Make :L&T / Legrand / ABB / SIEMENS. |
| 8 | Supplyingand fixingoffollowingway, singlepoleandneutral sheetsteel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:- Make :L&T / Legrand / ABB / SIEMENS. |
| 9 | Double door-12 way |
| 10 | Double door-8 way |
| 11 | Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. Cable make : PLAZA /FINOLEX / UNITECH / BONTON / KEI / BIYANI / GEMSCAB / CMI . |
| 12 | 2x1.5 Sq. mm. |
| 13 | 2x4.0 Sq. mm. |
| 14 | 2x10 sq.mm. |
| 15 | Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required . i) 3x1.5 Sq. mm.Cable make : PLAZA /FINOLEX / UNITECH / BONTON / KEI / BIYANI / GEMSCAB / CMI . |
| 16 | Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. Cable make : PLAZA /FINOLEX / UNITECH / BONTON / KEI / BIYANI / GEMSCAB / CMI . |
| 17 | Wiring for circuit / sub-main with 4x10 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.10 Sq.mm. (4x10+2x10) HRFRLS/PVC insulated single core copper conductor cable for earthing as required complete in all respect as per entire satisfaction of Engineer- in- Charge. Cable make : PLAZA /FINOLEX / UNITECH / BONTON / KEI / BIYANI / GEMSCAB / CMI . |
| 18 | Wiring for circuit / sub-main with 4x16 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.16 Sq.mm. (4x16+2x16) HRFRLS/PVC insulated single core copper conductor cable for earthing as required. Cable make : PLAZA /FINOLEX / UNITECH / BONTON / KEI / BIYANI / GEMSCAB / CMI . |
| 19 | Earthing with copperearth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required complete in all respect.. |
| 20 | Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required complete in all respect. |
| 21 | Supplying and laying 8 SWG Copper wire at 0.50 mtr. below ground level for earth electrode conductor, including soldering etc. as required complete in all respect. |
| 22 | Providing, Installation, testing and commissioning ofceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required complete in all respect. i) Ceiling fan 1200 mm sweep Category -A Make : Usha/ Bajaj/ Anchor Panasonic. |
| 23 | Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required complete in all respect.i) Exhaust Fan, Light duty, (Domestic) 300 mm sweepMake : Usha/ Bajaj/ Anchor Panasonic. |
| 24 | Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18\" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required complete in all respect. Make : Racold / Bajaj / Usha. |
| 25 | 10 Liter capacity water heater (Cat-A) |
| 26 | 25 Liter capacity water heater (Cat-A) |
| 27 | Supplying and fixing of LEDfancy wall bracketincluding making connections, testing etc. as required complete in all respect Make : Wipro / Bajaj / Phillips / Jaquar /(Twinkle) Lux Max . |
| 28 | Supplying and fixing brass batten/angle holder including connections etc. as required complete in all respect. Make: Anchor , CONA , ESS ESS KAY . |
| 29 | Providing & fixing 20 watt indoor decorative LED batten with extured aluminim housing & opal diffuser IP 20 as percomplete with connection,testing and commissioning etc. Make : Wipro / Bajaj / Phillips / Jaquar /(Twinkle) Lux Max . |
| 30 | Providing & fixing surface mounting LED Down lighter 15 watt slim square with high efficient LED & glare free diffuser IP Halonex make w.e.f. cat no HLDLS-S06-15-cw complete with connection testing commissioning etc. Make : Wipro / Bajaj / Phillips / Jaquar /(Twinkle) Lux Max . |
| 31 | Providing & fixing Recess mounting LED Down lighter 15 watt slim square with high efficient LED & glare free diffuser IP Halonex make w.e.f. cat no HLDLS-S06-15-cw complete with connection testing commissioning etc.Make : Wipro / Bajaj / Phillips / Jaquar /(Twinkle) Lux Max . |
| 32 | Providing & fixing LED surface mountedLED Flat Panel 1x1 made of CRCA Sheet steel duly powder coated with high efficient LED \"s & glare free opal diffuser IP 20 luminaire complete with connection , testing and commissioning etc. as reqd. complet in all respect as per entire satisfaction of engineer in chargeMake : Wipro / Bajaj / Phillips / Jaquar /(Twinkle) Lux Max . |
| 33 | Providing and fixing LED 30 watt Street Light made up of pressure die cast aluminium housing & enclosed with toughened glassIP66 as per halonex make w.e,f Nov. 2017 Cat No HLSLD-09-30-CWL-E-Icomplete with connections,testing ,commissioning etc as required complete in all respect.Make : Wipro / Bajaj / Phillips / Jaquar /(Twinkle) Lux Max . |
| 34 | Providing & fixing LED Bulb 9 Watt complete with connection testing commissioning etc.as required complete in all respect. |
| 35 | Supplying and Fixing of metal box 200mm x150mm x75mm size with phenolic laminated sheet cover in recess I/C P/F 3Nos 6pin socket outlet 3Nos 5/6 amp switch connection as required (COMPUTER POINT) Make- ESS ESS KAY / CONA /Anchor |
| 36 | Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement, with sufficient No. vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall have cable entry box at one or two sides, with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form:- 600mx600mm x 300mm deep (nominal) including,Bus Bar 100 Amp. = 1No.MCCB 100 Amp = 1 NoPhase indicator =3 Nos and internal control wiring etc. as required complete in all respect. Make : L&T / Schneider / ABB / Legrand. |
| 37 | Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement, with sufficient No. vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall have cable entry box at one or two sides, with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form:-600mx600m x 300mm deep (nominal) including,Bus Bar 63 Amp. = 1No. MCCB 63 Amp=1 No. and Phase indicator =3 Nos etc. as required complete in all respect. Make : L&T / Schneider / ABB / Legrand. |
| 38 | Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement, with sufficient No. vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall have cable entry box at one or two sides, with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form:-600mx600m x 300mm deep (nominal) including,Bus Bar 200 Amp. = 1No. MCCB 200 Amp=1 No. and Phase indicator =3 Nos etc. as required complete in all respect. Make : L&T / Schneider / ABB / Legrand. |
AI Tender Summary
Tender Timeline
Aug 13, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedAug 20, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 20, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender