Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 01-10-2021 | DATEN | Date | 06-10-2021 |
| 2 | 24-09-2021 | DATE | Date | 30-09-2021 |
| 3 | 16-09-2021 | Extension of dates | Date | 23-09-2021 |
| 4 | 08-09-2021 | Extension | Date | 15-09-2021 |
| 5 | 23-08-2021 | extention | Date | 07-09-2021 |
| Sl. No. | Item Description |
| 1 | ICU Bed Electric (ABS Platform, Panels & Side Railings):Frame work made of Rectangular CRCA Tube of 50mm x 30 mm x 1.6 mm thickABS Mattress platform in four sections Back Rest, Knee Rest, TB/RTB and Hi-Lo Positions obtained by electric actuator operator by hand remote system ABS moulded head and foot bows ABS track away safety side Railing Telescopic IV Rod with Two Locations Bed Mounted on 125 mm Dia Castor with central Braking system Overall Size: 2080 to 2090 L x 910W x 460 -700H MM. Finish: Pre-treated & Epoxy Powder Coated |
| 2 | ICU Bed Electric (M.S Platform, ABS Panels & ABS Side Railings):Advance linear actuator system [04Pcs Motor, 01 Pc Control box, 01 Pcs Handset].Four Pieces individual Side-rails, ABS Moulded.ABS Head &Foot Panel with locking & Corner buffer.Framework Made-up of M.S Tubes.4 section top made-up of Oval perforated CRCA M.S. Sheet.Bed mounted on 5” Central locking Castors, Durable & quite.S.S Telescopic I.V.Rod with 2 Hook & at 4 locations.Holder for Urine Bag.Finish: Pre-treated & Epoxy Powder Coated.Overall Size: 2080 to 2090 L x 910W x 460 -700HMMPositions Obtained function by Hand Remote.Hi-low.Backrest elevation.Knee rest elevation.Trendlenburg/Reverse Trendlenburg. |
| 3 | ICU Bed Mechanically. ABS Panels/ S.S Panels.Frame work made of Rectangular CRCA Tube of 50 mm x 30 mm (1.6 mm thick)4 Section Top made of perforated CRCA sheets, 1.25 mm thick Back Rest, Knee Rest, TB/RTB and Hi-Lo positions Maneuvered by Separated screw from Foot End ABS Panels/S.S Panels Collapsible / Swing always safety side Railing Telescopic IV Rod with Four LocationsBed Mounted on 125 mm Dia Castor Two with Brakes Overall Size: 210 L x 90W x 60 -80 H cmsFinish: Pre-treated & Epoxy Powder Coated. |
| 4 | Hospital Fowler Bed (ABS panels & ABS plate form):Frame work made of Rectangular M.S Tubemade of 50 mm x 30 mm (1.6 mm thick)ABS Mattress platform in 4 sections Back Rest, Knee Rest, Positions Maneuvered by Separate screw from Foot End ABS molded Head and Foot bows Collapsible safety side Railing Telescopic IV Rod with Two Locations Bed Mounted on 125 mm Dia Castor two with BrakesOverall Approx. Size: 2080 to 2090 L x 910 W x 600 H MMFinish: Pre-treated & Epoxy Powder Coated. |
| 5 | Hospital Fowler Bed (ABS panels):Frame work made of Rectangular M.S Tubemade of 50 mm x 30 mm (1.6 mm thick)4 Section top made of Oval/Dimple perforated M.S Sheet 1.2 mm thick.Back Rest, Knee Rest, Positions Maneuvered by Separate screw with foldable Handle from Foot End ABS molded Head and Foot Panels.Four locations for I.V Rod.Bed Mounted on 125 mm Dia Castor two with BrakesOverall Approx.Size: 2080 to 2090 L x 910 W x 600 H MMFinish: Pre-treated & Epoxy Powder Coated. |
| 6 | Hospital Fowler Bed (S.S Panels) Frame work made of Rectangular M.S Tubemade of 50 mm x 30 mm (1.6 mm thick)4 Section top made of Oval/ Dimple perforated M.S Sheet 1.2 mm thick.Back Rest, Knee Rest, Positions Maneuvered by Separate screw with foldable Handle from Foot End Stainless Steel Head & Foot Panel with laminated board.Four locations for I.V Rod.Bed Mounted on 125 mm Dia Castor two with BrakesOverall Approx. Size: 2080 to 2090 L x 910 W x 600 H MMFinish: Pre-treated & Epoxy Powder Coated. |
| 7 | Hospital Semi Fowler Bed (ABS panels & ABS plate form):Frame work made of Rectangular M.S Tubemade of 50 mm x 30 mm (1.6 mm thick)ABS platform. Back Rest Position Maneuvered byscrew with foldableHandle from Foot End ABS molded Head and Foot bows Four locations for I.V Rod.Bed Mounted on 125 mm Dia Castor two with BrakesOverall Approx. Size: 2080 to 2090 L x 910 W x 600 H MMFinish: Pre-treated & Epoxy Powder Coated |
| 8 | Hospital Semi Fowler Bed (ABS panels & M.S Platform):Frame work made of Rectangular M.S Tubemade of 50 mm x 30 mm (1.6 mm thick)2 section top made-up Oval/ Dimple perforated M.S Sheet 1.2 mm thick.Back Rest Position Maneuvered byscrew with foldable Handle from Foot End ABS molded Head and Foot bows Four locations for I.V Rod.Bed Mounted on 125 mm Dia Castor two with BrakesOverall Approx. Size: 2080 to 2090 L x 910 W x 600 H MMFinish: Pre-treated & Epoxy Powder Coated |
| 9 | Hospital Semi Fowler Bed (S.S panels & M.S Platform):Frame work made of Rectangular M.S Tubemade of 50 mm x 30 mm (1.6 mm thick)2 section top made-up Oval/ Dimple perforated M.S Sheet 1.2 mm thick.Back Rest Position Maneuvered byscrew with foldable Handle from Foot End Stainless Steel Head & Foot Panel with laminated board.Four locations for I.V Rod.Bed Mounted on 125 mm Dia Castor two with BrakesOverall Approx. Size: 2080 to 2090 L x 910 W x 600 H MMFinish: Pre-treated & Epoxy Powder Coated |
| 10 | Hospital Semi-Fowler Bed with ABS PanelFrame work of strong and precise Steel tube, mounted on 120mm dia castors,2 with breaks, having two sections top of perforated CRCA Sheets of 1.25mm thick duly machine press bent with mattress guards. ABS panels mounted head and foot bows back rest section maneuvered by crank mechanism from foot end.Provision for four locations I.V.Rod overall size 203 x 90W x 60H cmsPre treated& Epoxy powder coating finish |
| 11 | Bed Side screenWith four folds shall be made from 2.5cms x 18G pipe having 198 cms height with 5 cmsdia sheets.Each Frame size shall be 61 cms wide with curtains cloth. Size 244 x 168 cms with two castors dia 5 cms. Spring wire shall be fitted at top and bottom in each frame. |
| 12 | Hospital Ward Bed Plain:Tubular Head and Foot Bows of unequal height with vertical tube support.Frame work made of Rectangular M.S Tube (1.5 mm thick)Top made-up of Oval/Dimple perforated CRCA M.S. Sheet (1 mm Thick)Legs fitted with PVC Stumps.Four locations for I.V Rod.Overall Approx. Size: 2080 to 2090 L x 910 W x 600 H MMFinish: Pre-treated & Epoxy Powder Coated |
| 13 | HOSPITAL WARD PLAIN BED198cmsx93cms(Length x Width) and 61 cms height from floor. Main Frame of Pipe 4cms x 18G, with mattress guard, Air circulated perforated CRCA 20G Sheets Top with 20 cavity holes shall be provided below the sheet, tabular head and bow down of unequal Height with four vertical tube supports of 2.5 cms x 20 G pipe, on rubber shoes, provision for four I.V Fluid (Saline) locations. The bed frame shall be fitted to head and foot bow with help of brackets of 2.5mm thickness.Pre treated& Epoxy powder coating finish. |
| 14 | Pediatric bed:Overall Size: 137 L x 76 W x 60 H cmsMain frame of rectangular pipe, perforated CRCA sheet top 1.2 mm thick perforated, tubular head & foot bows of equal height with vertical tube supports on 100 mm dia castors, drop down safety side railings are provided, pre-treated & Epoxy Powder Coating finish. |
| 15 | Attendant Bed cum Chair:MS Tubular frame work of 1.5 mm thick, mounted on two 10 cm castorsPre treated & Epoxy Powder Coated Finish Overall Size : (188L x 50L x 40H cms) |
| 16 | Saline Stand (M.S):M.S. Tubular Pipe 1 ¼ dia of 18 G thick.Five legs Plastic Base 5cms castors.S.S. adjustable I V rod with double hook. Pre-treated and Epoxy Powder coated. |
| 17 | Saline Stand (S.S):S.S. Tubular Pipe 1 ¼ dia of 18 G thick. Five legs Plastic Base 5cms castors. S.S. adjustable I V rod with double hook. |
| 18 | Bed side screen (3 panels):a).* Bed Side Screen (3 Folds) With Curtains (66”H x 96”L)* Tubular frame work of 18 G, CRCA, mounted on 5cms castors with curtain hook & curtainsprings. Pre-treated and Epoxy Powder Coated. |
| 19 | b).* Bed Side Screen (4 folds) shall be made from 2.5cm x 18G |
| 20 | Double Step StoolSize 51 x 45 x 20cms Steel tubular framework (18G pipe) with Aluminium treads flats.M.S Tubular frame.Legs fitted with rubber shoes.Pretreated and Epoxy Powder Coated. |
| 21 | Bed Side Locker (Deluxe):Size : (16\"Lx 16\"W x 32\"H) Locker machine pressed from 20 SWG CRCA Sheet with all three sides closed, having one box & a drawer.*S.S. top with raised edges. Mounted on two 5cms dia swiveling castors two PVC stumps. *Epoxy Powder Coated. |
| 22 | Bed Side Locker (S.S.Deluxe):STAINLESS STEEL 304 GRADE BED SIDE LOCKER WITH DRAWER AND S.S TOP.OVERALL SIOVERALL SIZE: 41 Cms x41 Cms x 81 Cms (H) + 1 Cms.The manufacturing should be of machine press bent S.S Sheet of 304 Grade of 0.8 mm thickness cabinets, provided with three louvers of .75 + 5 mm length on the press lock door, for ventilation.Top: Should be made of S.S 304 grade and without any sharp edges, to be provided with raised rounded edges on three sides that act as guard rails.Locker Body: Made of S.S of 304 Grade of 0.8 mm thick sheet. The locker body should contain one drawer working on roller slides and one locker cabinet. Between the locker cabinet and drawer, there should a shelf with front open. The body of locker should be 405 x 405 x 710 mm approx.Cabinet Door: Made of S.S Sheet of 304 Grade of 0.8 mm thick, press bent on all the four sides to give channel shape for strength and is bent to give push/pull handle self-form, with push catch to hold door. Front Legs: The front of the locker should have legs mounted on rubber stumps. The legs should be made of 40 mm x 40 mm x 18 SWG S.S tubes.Rear Castors: The locker should have Twin Type rear nylon castors of50 mm dia, for mobility.All S.S material should be fully polished to provide Hair line finish on Top & matt S.S finish in rest all the parts. |
| 23 | Bed Side Locker (Standard):. Size: 405 L x 405 W x 810 H. MM.. Four CRCA M.S Pipe legs of 18 G thick fitted with PVC Stumps.. Box & Door made of CRCA M.S sheet 20 G thick.. S.S. top with raised edges.. Finish: Pre-treated & Epoxy Powder Coated. |
| 24 | Hospital Bed side locker 32” height with 0.50mm thick stainless steel sheet top size 16”x16” central cabinet of size 14”x16”x12” of 18G steel with chrome plate knob. Central cabinet support 1”x16G pipe coveredwith rubber shoes pretreated epoxy powder coated |
| 25 | Bed Side Locker(S.S ) (Standard):Size: 405 L x 405 W x 810 H. MM.. Four S.S Pipe legs of 18 G thick fitted with PVC Stumps.. Box & Door made of S.S 304 Grade sheet 0.8 mm thick.. S.S. top with raised edges.Cabinet Door/ Box: Made of S.S Sheet of 304 Grade of 0.8 mm thick, press bent on all the four sides to give channel shape for strength and is bent to give push/pull handle self form, with push catch to hold door. |
| 26 | Over Bed Table Fixed Height.. Overall approximate dimension: 42”x 18” x 36” Frame of 1” x 16g pipe with four 2” castors.. CRCA M.S Round 1” dia tubular Pipe base frame 18 G thick.. Mounted of four swivel castors 50 mm dia without brake.. Finish: Pre-treated & Epoxy Powder Coated. |
| 27 | Emergency & Recovery Trolley (Hydraulic):Size: 210L x 65W CMS Height 65 to 95 CMS. Made of Heavy duty ERW Steel tube, S.S. swing away railing, S.S. telescopic saline Rod, and Storage tray and oxygen cylinder cage. Removable X-Ray translucent provided with a tray for holding X-ray cassettes underneath the entire length of the stretcher. Height adjustment hydraulic system, trendelenburg and reverse trendelenburg by pressure cylinder. Fitted with 15cms dia castors-two with brakes and rubber buffers on all sides.Pre-treated & Epoxy powder coated |
| 28 | Patient Trolley with Fixed Cushioned 2 Section top: Overall Approx. Size: 201L x 56W x 81H cms Frame work made of Tubular CRCA Pipe of 16 gauge thickSwing away type Safety Side Railing. I.V. Rod location at two Sides, Cylinder Cage.Two section foam padded top covered with Rexien Cloth.Brackrest Adjustable • Trolley mounted on 15cms Dia castors - Two with Brakes Finish: Pre-treated & Epoxy Powder Coated. |
| 29 | Patient Transfer Trolleys: *Size:(201L x 56W x 81H cms) *Frame work of CRC tubes mounted on 15cms castors. *Removable stretcher top with chrome plated handle, 18 gauge aluminum sheet. *Pre-treated and Epoxy powder coated finish without mattress. |
| 30 | Patient Trolley with Fixed Cushioned 2 Section top: Overall Approx. Size: 201 L cms x 2.5 feet W x 81 H cms Frame work made of Tubular CRCA Pipe of 16 gauge thickSwing away type Safety Side Railing. I.V. Rod location at two Sides, Utility Tray, Cylinder CageTwo section foam padded top covered with Rexien Cloth. Brackrest Adjustable • Trolley mounted on 15cms Dia castors - Two with Brakes Finish: Pre-treated & Epoxy Powder Coated. |
| 31 | Hospital Wash Basin Stand (Double):Five legs base mounted on 5cms dia castors.With Two Approx. 35 cms S.S Basin.Vertical SS tube made of 25mm x 18G.Basin holder SStube/ SS Round Bar. |
| 32 | Hospital Wash Basin Stand (Single):Five legs base mounted on 5cms dia castors.With One Approx. 35 cms S.S Basin.Vertical SS tube made of 25mm x 18G.Basin holder SStube/ SS Round Bar. |
| 33 | Crash Cart Cum Defibrillator Trolley (S.S):Crash cart will be all SS.Top shelf should be with blunt edges.Railing will be thicker.There will be SS Rods at the bottom to keep I.V- fluid bottles.Board at the back should be slided from sides.There will be only two drawers one with 3- partitions & 6” deep for medicines & the second drawer be 8” deep to hold ambu bags & accessories of defibrillatorsHeight upto shelf should be 95 cms. Total Height 150 cmsTop shelf width should be 60 cms.Main Frame made of SS Round 1” dia 18G pipe. |
| 34 | Crash Cart Trolley S.S :Crash cart trolley overall sizeL 940mmx W 490mm x W 1535mm S.S Tubular frame size removable plastic bins and two polystyrene lockable storage units with 3 drawers each 4 swivel castors 150mm Dia two brakes complete with corner buffer powder coated oxygen cylinder carrier SS I.V Rod and shelves cardiac massage board. |
| 35 | Garbage Transportation Trolley:Length 36”, height 36”, width 24” made up of CRCA M.S pipe of 1” x 16GCastor 6” x 1 ½” two no’s revolving front & two no’s fixed back castors 6” 1 ½” fixed with aluminum sheet inside trolley on all sides and base with epoxy paint of same colour as outside Epoxy paint of black/ yellow/Red colour . |
| 36 | Examination Couch with cabinet & drawers:Overall size: 187L x 51W x 81H cms.Backrest: 45L x 51W cms.Main Frame: 138L x 51W cmsMade from C.R.C.A. sheet of 1 mm thick and machine pressed.Easy and instantaneous tilt of backrest section with the help of Gas spring system.Foam padded, upholstered top for patient comfort.Cabinet in lower section for storage of medicines, bandages etc., using sliding doors for maximum utility within limited space.Three drawers in upper section and swinging tray for B.P. apparatus.Epoxy Powder Coated finish |
| 37 | Folding Stretcher:Aluminum Folding Stretcher (Canvas) (213Lx56W x 15H cms) Aluminum tubular bars fitted with Canvas top. Metal cross supports. Legs fitted with PVC stumps. Pre-treated and Epoxy Powder coated finish lengthwise as well as widthwise. |
| 38 | Labour Table Room Bed (Electric)Overall size: 1880Lx660Wx600-800H MM.Tubular frame work mounted on 125mm dia central locking castor.Three section top made of Bakelite sheet covered with 3 section mattress.Trendelenburg/Rev. Trendelenburg positionsheight adjustment,back sectionadjustment through electronic actuator system. Leg end section can slide under the main section. Height adjustable a pair of Foam paddedknee crutches Detachable S.S tray.ABS Head Panel. |
| 39 | Obstetric Labour Table Telescopic (Adjustable Height):Approx. Dimensions\" 72\" L x 27\"W x 24\"-32\"H.Tubular frame work mounted on swiveling castors Bakelite Sheet top in three sections with three section mattress Trendelenburg/Rev. Trendelenburg positions adjustable by crank system from back end. Hydraulically height adjustable by foot paddle from side. Backrest section adjustable on crank mechanism.Leg end section can slide under the main section. Height adjustable a pair of Foam paddedknee crutches Pre treated& Epoxy powder coatedDrop down Railing are provided on 3 sides of table. |
| 40 | Obstetric Delivery Bed in 2 parts (2 Section top):Approx. Dimensions: 72\"L x 30\" W x 30\"H.Tubular frame work made in two sections. Body Section with legs mounted on PVC stumps. Leg section on swivel castors with brakes.Two section cushioned top. Height adjustable a pair of knee crutches.Pre treated& Epoxy powder coated |
| 41 | Obstetric Delivery Table (3 Section top):Approx. Dimensions: 72\"L x 22\"W x 30\"H Rectangular & square tube frame work mounted on PVC stumps Three sections cushioned top. Backrest, Seat, Leg section adjustable by hand lever.Complete with SS bowls Height adjustable a pair of knee crutches.Pre treated& Epoxy powder coated. |
| 42 | Examination Table Plain:Size : 180 x 60 x 80 cmsFrame work of CRCA tubes. 50mm x 30mm x 1.6mm thickLegs fitted with PVC stumps. 5cms foam cushioned top covered with rexine. Pre-treated and Epoxy Powder coated. |
| 43 | Examination Table (2 Section):Approx. Dimensions : (72 \"\" L x 24\"\" W x 32\"\" H)CRCA tubes of 50mm x 30mm x 1.6mm thick Legs fitted with PVC stumps. Two Sections Cushioned top.Adjustable Back Rest by hand lever.Legs fitted on PVC stands. Pre treated& Epoxy Powder coated. |
| 44 | Gynae Examination Table (Plain):Size : 180 x 60 x 80 cmsFrame work of CRCA tubes. CRCA tubes of 50mm x 30mm x 1.6mm thick Legs fitted with PVC stumps. 5cm foam cushioned top covered with rexine with perineal cut. Adjustable lithotomy poles with straps. Pre-treated and Epoxy Powder Coated finish |
| 45 | Examination (table) Couch Steel bed made of 2”x1” rectangular pipe having dimensions 72”x24”x30” with seat of 12mm ply and foam covered with raxine , legs fitted with rubber suac pretreated epoxy powder coated |
| 46 | Examination Table 3 Section:Overall Size: 180L x 60W x 81H cms. CRCA tubes of 50mm x 30mm x 1.6mm thick Frame work made of Rectangular 5 cm foam cushioned top covered with rexine with perineal cut. Legs fitted with PVC Stumps Back Rest & leg rest section Adjustable on Ratchet / Lever Finish: Epoxy Powder Coated |
| 47 | Kick bucket:Stainless Steel Kick Bucket (12\"x 14\") with BasinM.S. Tubular frame work mounted on 5cms castors. *With 35cms dia S.S. basin. *Pre-treated and Epoxy Powder coated. |
| 48 | Soiled Linen Trolley for holding dustbins (60) liters Capacity (SS):*Frame work of SS pipe 1” x 18G mounted on 100 mm dia castors four no’s withPush handle at one end. |
| 49 | Soiled Linen Trolley for holding dustbins (60) liters Capacity (M.S): Frame work of CRCA M.Spipe 1” x 18G mounted on 100 mm dia castors four no’s with Push handle at one end. Pre-treated & Epoxy powder coated |
| 50 | Linen Change Trolley:CRCA of 16G, Tubular frame mounted on 10 cms Dia castors Three shelves made of MS sheet A canvas Bag fitted on front side Epoxy Powder Coated Finish |
| 51 | Soiled linen trolley with canvas bag: *Soiled Linen Trolley with canvas Bag (91H x 51 cm dia.) with push handle *Frame work of CRC, 16G, tube mounted on 10cms castors.*Superior quality canvas bag. *Pre-treated and Epoxy powder coated finish |
| 52 | Cylinder trolley: Tubular frame work of CRCA 16GTwo 10 cms castors CRCA sheet base plate of 3 mm thick Pre- treated and Epoxy powder coated finish A - For small cylinder B- For large cylinder |
| 53 | Foot Step Double: * CRCA Tubular legs, 16 G, fitted with PVC stump. * CRCA top fixed with aluminum beadings. * Pre-treated and Epoxy Powder Coated. |
| 54 | Foot Step Single: * CRCA Tubular legs, 16G, fitted with PVC stump. * CRCA top fixed with aluminum beadings. * Pre-treated and Epoxy Powder Coated. |
| 55 | Patient Stool Revolving Cushioned Top: * CRCA Tubular four legs, 16 G, fitted with PVC stumps. * Foot ring supports. * 18\" to 27\" adjustable height with cushion top, through screw. * Pre-treated and Epoxy Powder Coated. |
| 56 | Patient Stool Revolving S.S.Top: * CRCA Tubular four legs, 16G, fitted with PVC stumps. * Foot ring supports. * 15\" to 24\" adjustable height with cushion top, through screw. * Pre-treated and Epoxy Powder Coated. |
| 57 | Monitor Trolley:Overall approx. size 800 mm L x 600 mm W x 1408 mm H. One drawer & 4 shelves Oxygen cylinder cage & I.V Rod.Mounted on 125 mm casters # Switch & socket panel for medical Equipment Epoxy powder coated |
| 58 | Medicine Trolley with 4 Drawers:Hospital Medicine Trolley with 4 Drawer Size:- 76L x 46W x 81 H cmsFrame work of square CRCA tubes 16 gauge thick mounted on 10cms castors. Two S.S. shelves with three side railing on top shelf. Two drawers under the each shelf.Pre-treated and epoxy powder coated finish |
| 59 | Dressing Trolley (76 L x 46 W x 81 H cms):S.S:Main frame made of SS Round Tubular Pipe 1” dia of 16GMounted on 10 cms.Castors.Two SS Shelf with four side railings.Provision for Holding the Bowl and Bucket. Push handle at the one end of the dressing trolley. |
| 60 | Instrument trolley (2 Shelves with 4 side railing):SS: Instrument Trolley mounted on 7.5cms castors. Main frame made of SS Round Tubular Pipe 1” dia of 16G Two S.S. shelves with three side railing on top shelf. Size: - 76 L x 46W x 81 H cms. |
| 61 | Instrument Mayo Trolley over the OT Table (Mechanically); SS Main frame made of SS tubular Pipe.Approx Tray S.S Size: 91 L x 50 W cmsmounted on 10 cms castors Height adjustable by gear handle |
| 62 | Mayo\"s Instrument Trolley with S.S. tray:Mayo\"s Instrument Trolley with S.S. Tray *(Tray size: 56Lx40W cms) *Rectangular SS (16 gauge) tubes mounted on 5cms castors, height Adjustable bed-side Knob. *Pre-treated and Epoxy Powder Coated finish |
| 63 | Mayo\"s instrument trolley (Mechanically):S.S tray size: 76 x 40 Cms. SS tubes, 16 G, mounted on 5 Cms. Castors Height adjustable by gear handle |
| 64 | Instruments Trolley,Size 91 x 86 x 46 cms.Two Stainless Steel shelves with SS Rails to cover three sides of top shelf and four sides of bottom.Frames of CR,ERW tubular steel, on four 5 cm Swivel Castors. Pretreated, Epoxy Finish |
| 65 | Invalid wheel chair Folding (Detachable Armrest & Footrest):Invalid Wheel Chairs Folding (Special Model) *Size :- (42\" L x 26\"W x 36\"H) *17\" Seat with Fixed armrest, front with 5\" Solid with brakes |
| 66 | Invalid wheel Chair RigidSizes 67w x 110d x 94h cms. ERW steel tubular frame work fitted with metal seat and back.Adjustable foot rests, solid rubber tyre wheels fitted with self propelling hoops and brake arrangements.20 cm dia.Swiveling Castor wheels in front |
| 67 | Patient Attendant Stool:. Approx. Size 12”x12”x20”H. Top made of SS Sheet..Legs made of 25 mm x 18G & horizontal support of 19 mm x 18G CRCA tube fitted with PVCStumps.. Finish: Pre-treated & Epoxy Powder Coated |
| 68 | Patient Attendant Stool Round Top (M.S):. Main frame made of CRCA square pipe 19 mm x 1.5 mm machine bended.. Round Top made of CRCA 20 G thick die pressed.. Height of Stool 20”.. Finish: Pre-treated & Epoxy Powder Coated. |
| 69 | Patient Attendant Stool Round Top (S.S):. Main frame made of SS square/round pipe 19 mm x 1.5 mm machine bended.. Round Top made of SS 20 G thick die pressed.. Height of Stool 20”.. Finish: Stainless steel. |
| 70 | Hospital Full-Fowler/ ICU Bed (ABS Panels)Frame work made of rectangular CRCA tube 50mm x 30mm (1.6mm thick).mounted on 125mmdia castors, 2 with breaks.Four section top made of perforated CRCA Sheets of 1.25mm thick, back rest section positions maneuvered by screw from foot end. ABS moulded head and foot bows. Location for four I.V. Rod. Overall size 206L X 90W X 60H cmsPre treated& Epoxy powder coating finish. |
| 71 | Revolving Stool Three leggedWithM.S tubular framework 2.5 cms x 20G Pipe screw based height adjustment from 7 to 68 cms SS revolving top.Legs fitted with rubber shoes |
| 72 | Critical Patient’s TrolleyWith removable stretcher 80” x 22” X 32” (overall size) Trolley frame of 1” x 16g pipe mounted with large castors ( diameter 150 mm) with braking and steering facility and foldable to adjustable in ambulances. Removable stretcher frame of 1” x 16g pipe with 20g aluminium sheet giving uniform depression towards the center.Stretcher handles chrome platedPre treated& Epoxy powder coating finish |
| 73 | Hospital locker pigeon HoleHospital locker pigeon hole size 78” x36” x18” with 12 pigeon holes having individual locking arrangements and knobs made from 22g sheet. |
| 74 | Wash Basin StandSingle with basin standard size made from 1” x 14” GERW tubes. Metal cross bars and canvas top. |
| 75 | Oxygen gas cylinder trolleyPush type having 42” height made from 1” x 16g pipe. Fitted with two 4” dia wheels with rubber.Base plate 2.5mm thick. |
| 76 | Perforated steelbenchMounted with three perforated seats, Legs fitted with rubber shoes, pretreated and Epoxy Powder Coated |
| 77 | Three Seater bench Superior qualityChrome plated with cushioned seat and back having side arm rests |
| 78 | Racks For Medicines-IWith slotted steal angle post of 35 x35 x 3mm having holes 10mm diaprovided at 50mm centers.Shelves shall be made of 1mm thick sheet with lipped flanges of 3mm width and 15mm depth.Eight gussets, four on each face of the rack shall be fitted.Thickness of gussets shall not be less than 1 mm and length 75mm enamel finish.Size 810 x 380 x 760mm with six shelves. |
| 79 | Racks For Medicines-IIWith slotted steal angle post of 35 x35 x 3mm having holes 10mm dia provided at 50mm centers.Shelves shall be made of 1mm thick sheet with lipped flanges of 3mm width and 15mm depth.Eight gussets, four on each face of the rack shall be fitted.Thickness of gussets shall not be less than 1 mm and length 75mm enamel finish.Size 810 x 380 x 1980mm with six shelves. |
| 80 | Patient Transfer Trolley:-Patient weight bearing capacity of 170 Kg minimum made of stainless steel and rust proof materials, dimensions length 190cms and width 75cms. Convenient to move in all directions with sturdy swiveling castors and locking device for wheels. Hands free pneumatic/hydraulic assist positioning for height adjustment, trendleburg and reverse trendelenberg positions. Provision for quick release of elevated head end. Tuck away/fold down adjustable light weight safety side Rails with self locking mechanism. Foot end panels should have holding bracket for transport ventilator and transport monitor. Head end panel should have holding bracket for patient files and record sheets. One oxygen Cylinder bracket and utility tray beneath mattress base. Stainless steel adjustable I.V Drop rod with double holding hooks I.V drip rod holding position one at each corner of trolley. Pushing rubberized bumper handle at both ends. P.U foam mattress. |
| 81 | Anesthesia Drug Trolleys:-Body should be made of ABS Plastic, should have vertical rows of 5-6 drawers with label holders, side by side to hold anesthesia drugs, I/V fluids and I/V access equipment etc. Drawers should be lockable with single lock for top most drawers on each. Should have approximate dimensions 850x520x950mm. Should have at least 8 small bins side by side on the top to hold ampoules of emergency drugs. Should have polyurethane noiseless castors two of them with brakes. Should have waste bins fixed on two sides. Should have rust proof stainless steel guard rail. |
| 82 | ATTENDENT BEDDescription:-Framework made of rectangular/ square M.S tube.50 mm (2”) Foam padded Fixed mattress covered with good quality Rexine.Legs fitted with PVC Stumps/ shoes.Finish: Pre-treated & epoxy Powder coated.Overall size; 1840L x 600W x 500h MM. |
| 83 | BEDSIDE LOCKER (ABS)Description:ABS Body Bed side Locker with Cupboard and drawer with ABS Top.Mounted on 50 mm (2”) wheels.Towel stand available both sides.Available in knock down construction.Overall Size: 480L x 480W x 800H mm |
| 84 | OVERBED TABLE (Pneumatically adjustable)Description:Poly Propylene (PP) top with raised edges on all sides.Aluminum extruded telescope section fitted with gas spring for height adjustable from approx. 790mm to 1070mmMild steel base frame covered with durable haigh impact poly propylene (PP) base cover. Mounted on 50 mm (2”) wheels.Finish: Pre-treated & epoxy Powder coated.Overall size: 890L x 435W x 28H mm.Top size: 880L x 435W x 28H mm. |
| 85 | OVERBED TABLE (By Knob adjustable)Description:Poly Propylene (PP) top with raised edges on all sides.Telescopic rectangular frame work for height adjustable from approx. 750mm to 1050mm.Mounted on 50 mm (2”) wheels.Finish: Pre-treated & epoxy Powder coated.Overall size: 1000L x 435W x750 - 1050H mm.Top size: 880L x 435W x 28h mm |
| 86 | OVERBED TABLE (Fixed)Description:Poly Propylene (PP) top with raised edges on all sides.Tubular Framework mounted on 50mm (2”) wheels.Finish: Pre-treated & epoxy Powder coated.Overall size: 1060L x 435W x 1060H mm.Top size: 880L x 435W x 28h mm. |
| 87 | AMBULANCE STRETCHERDescription:Light weight and strong structure made up of high quality aluminium alloy.The Stretcher mattress is made of soft sponge mattress, which make patient feel comfortable.One medical staff can push the trolley onto the ambulance or send to ward.When need low position, pull out the safety handle & then press it, the stretchers height will automatically lower down.When destination arrived, pulling out the safety handle, the stretcher’s legs will unfold automatically.There are the return elastic look device at both side of the stretcher & the leg parts. Lock tightly when turn up for patient safety, turn down for patients out.Pressing the button under the stretcher, the head part will be raised or lowered.Dimensions:Product size:High position: 1930L x 550W x 850H mmLow position: 1900L x 600W x 240W mmAngle of the Backrest: 75oLoad Bearing : less than 159kg |
| 88 | AMBULANCESTRETCHER CUM WHEELCHAIRDescription:It is made of high –strength aluminum alloy thick- wall pipes.The bed surface is made of foamed cushion & the adjustable back making the wounded feel comfortable.The mechanical foldaway legs are controlled by one handle on one end of the stretcher. And the legs can be folded under the stretcher when loading into the vehicle.This type of stretcher is characterized by its being light, durable antiseptic easy for sterilization.This stretcher trolley can be converted into a chair/wheelchair; the angle of the chair can be adjusted according to your requirement.It is quite suitable to transfer the patients in the limited place, like small lifts in hospital.Dimensions:Product size: High position: 1960L x 550W x 860H mmLow position: 1960L x 550W x 250W mmAngle of the Backrest: 85oLoad Bearing : less than 159kg |
| 89 | EMERGENCY TROLLEY (ABS)Description:Frame work made of ABS plastic body with aluminum columns. Provided with IV pole, Dustbin (2pcs), utility container, File holder, sliding side shelf, S.S rail on top, Defibrillator shelf, and Powder outlet at rear with hook, oxygen tank holder at rear, C.P.R board at rear. Centralized locking system for 2 small & big drawers; provided with adjustable inner partitions. 125 mm (5”) Diagonal locking castors.Overall Size (approx): 850 x 520x 950mm |
| 90 | ANESTHESIA TROLLEY (ABS)Description:Frame work made of ABS plastic body with aluminum columns. Provided with IV pole, Dustbin (2pcs), utility container, File holder, Multi bin containers (1 set of 4 pcs), sliding side shelf & S.S rail on top. Centralized locking system for 2 small & big drawers; provided with adjustable inner partitions. 125 mm (5”) Diagonal locking castors.Overall Size (approx): 850 x 520x 950mm |
| 91 | LAPROSCOPIC TROLLEYDescription:Four shelves adjustable and one drawer.Trolley provided with two handle The trolley mounted on 125mm (5”) Diagonal locking castors.Provided with Switch & socket for medical equipment along with 1 main MCB for protection.Supplied with S.S IV rod & MS oxygen cylinder cage.Finish:pre-treated and epoxy powder Coated Overall approx size: 889L x 735W x 1750H mm |
| 92 | SURGEON CHAIRDescription:Fixed cushioned seat &backHeight adjustable from 540 mm to 660 mmSwinging back rest and can be locked at any positionAluminum 5 legs base with S.S foot ringBasefitted with 50 mm (2”) castors |
| 93 | REVOLVING STOOL (SS TOP)Description:Fixed cushioned seatHeight adjustable from 510 mm to 650 mmlegs plastic base mounted on 50 mm (2”) castors |
| 94 | WAITING AREA CHAIR (Set Of 3 Chairs)Description:Perforated sheet M.S sheetSolid Aluminum alloy armrest and legs Set of 3 seatsFinish: pre-treated and epoxy powder Coated Overall approx size: 1765L x 710W x 775H mm |
| 95 | BIO MEDICAL WASTE BINS (FOOT OPERATED)With SS frame (set of 4 Bins)Available in Red / Blue/ Black/ yellow colours20 / 30 Ltrs capacity. |
| 96 | S/S Food Service TrolleyThe food service trolley shall be constructed• with a strong S/S tube frame. The Trolley shall be completely insulated and the lids shall be of double plate, well insulated, and shall be provided with strong S/S hinges. When opened the lids shall be used as tables. The trolley shall be provided with four nylon swivel wheels.The trolley shall be provided with full size• bottom shelf of S/S Sheet (depressed 6 mm) for storage/racking of trays.The trolleys should be fitted with side guards• for protection.Material of Construction: S/S 304 Grade•Overall Dimensions:• Length:950mm Breadth:560 mm Height: 760mm above castor wheelsSize of insulated chamber: 810mm x 340mm x• 230mmApproximate weight: 70-78 Kgs (including• wheels)Handle: 2 No’s of 25mm dia. SS round tube:• 120mm x 560mm.Bottom Plate: S/S full size depressed plate, 22• SWG.Lid: S/S insulated 40mm thick lid cum food• service counter full length hinged.Size of Wheels: 4 No’s 150 mm rubberized• nylon swiveling wheels double bearing with base |
| 97 | S/S Food Service TrolleyThe food service trolley shall be constructed• with a strong S/S tube frame. The trolley shall be completely insulated and the lids shall be of double plate, well insulated, and shall be provided with strongS/S hinges. When opened the lids shall be used as tables. The trolley shall be provided with four nylon swivel.The trolley should have 2 cabinets below and• each cabinet should have 2 separate doors. One of the cabinets should be dividing into 2 halves, upper half and lower half.The trolley should be fitted with side guards• for protection.Materials of Construction: S/S 304 Grade•Overall Dimensions:• Length: 950mm Breadth: 560mm Height:760mm above castor wheelsSize of insulated chamber:810mm x 340mm x• 230mmApproximate weight:70-78 Kgs (including• wheels)Handle: 2 No’s of 25mm dia. SS round tube:• 120mm x 560mm.Bottom Plate: S/S full size depressed plate, 22• SWG.Lid: S/S insulated 40mm thick lid cum food• service counter full length hinged.Size of Wheels: 4 No’s, 150mm rubberized• nylon swiveling wheels double bearing with base |
| 98 | S/S Breakfast Trolley Breakfast trolleys with 18 SWG S/S top, sides• consisting of 20 SWG S/S sheet, shelves of 18 SWG S/S, main frame of S.S Pipe 1”x 1” with 25 mm dia S/S pipe handle.Bottom shelf of 18 SWG S/S. The trolley shall• be mounted on heavy duty 6” dia, castor wheels 4 No’s.The trolley will have 3 drawers and 2 cabinets• below. One cabinet should occupy 3/4th space and another 1/4th space. The small cabinet should be dividing into 2 halves, upper half, and lower half.The trolley top should accommodate 2 tea• urns of 12” – 3/4th” dia with protecting S/S sheet wall around Tea urns.The nozel should face the drawers and the top• should have a depression for accommodating glasses while pouring tea and have 25mm dia. drain waste.The trolley should be fitted with side guards• for protection.Overall Dimension:• Length:850mm Width:450mm Height:900mm from floor |
| 99 | S/S Food Service Container, Large Size with Lid:Material of construction: S/S22 SWG (0.70mm• -0.80mm)Breadth: 230mm x 265mm with collar•Length: 290mm x 325mm with collar•Depth:200mm•Capacity: 12 Liters•The container should possess SS handle for• holding on the both sides.Weight of Container:1.450Kgs•Weight of Lid: 550gms approx.•Total Weight: 2Kg approx• |
| 100 | S/S Food Service container, Small size with LidMaterial of construction: S/S22 SWG• (0.70mm-0.80mm)Breadth: 135mm x 162mm with collar•Length: 220mm x 265mm with collar•Depth:150mm•Capacity:4 Liters•The container should possess SS handle for• holding on the both sides.Weight of Container: 700gms approx.•Weight of Lid:250gms approx.•Total Weight: 950 approx• |
| 101 | S/S Tea UrnsHeavy duty tea urns made with superior quality stainless steel Capacity:10Liters |
| 102 | S/S Tea Urns Heavy duty tea urns made with superior quality stainless steel Capacity: 15 Liters |
| 103 | S/S Tea Urns Heavy duty tea urns made with superior quality stainless steel Capacity:20 Liters |
| 104 | Steel Cupboard/Almirha.Dimensions: - 2015 mm Height x 900 mm Width x 450 mm Depth. Number of Shelves 4 no’s Made of CRCA Sheet. Material Thickness 0.8mm.Finish: Pre-treated & Powder Coated 60–80 micron thickness.Standard features. Flush handle locking with Foldable keys, Concealed Hinges without brackets. Adjustable shelves. Dual purpose shelves for Box File / Hanging files with 40 kg load carrying capacity per shelves. Levelers. Master LockMaterial & Finishes. CRCA Sheet. Material Thickness - 0.8 mm |
| 105 | Steel Cupboard/Almirha.Dimensions: - 1335 mm Height x 900 mm Width x 450 mm Depth. Number of Shelves 2 no’s Made of CRCA Sheet. Material Thickness 0.8mm.Finish: Pre-treated & Powder Coated 60–80 micron thickness.Standard features. Flush handle locking with Foldable keys. Concealed Hinges without brackets. Adjustable shelves. Dual purpose shelves for Box File / Hanging files with 40 kg load carrying capacity per shelves. Levelers. Master LockMaterial & Finishes. CRCA Sheet. Material Thickness - 0.8 mm |
| 106 | Steel Cupboard Glass Door/Almirha.Dimensions: - 2015 mm Height x 900 mm Width x 450 mm Depth. Number of Shelves 4 no’s Made of CRCA Sheet. Material Thickness 0.8mm.Finish: Pre-treated & Powder Coated 60–80 micron thickness. Standard features:- Flush handle locking with Foldable keys. Concealed Hinges without brackets. Adjustable shelves. Dual purpose shelves for Box File / Hanging files with 40 kg load carrying capacity per shelves. Levellers. Master Lock. |
| 107 | Steel Cupboard Glass Door Sliding.Dimensions: - 2015 mm Height x 900 mm Width x 450 mm Depth. Number of Shelves 4 no’s Made of CRCA Sheet. Material Thickness 0.8mm.Finish: Pre-treated & Powder Coated 60–80 micron thickness. Standard features: - Plastic handle locking with Foldable keys. Smooth Sliding rails. Adjustable shelves. Dual purpose shelves for Box File / Hanging files with 40 kg load carrying capacity per shelves. |
| 108 | Steel Cupboard Glass Door Sliding.Dimensions: - 1335 mm Height x 900 mm Width x 450 mm Depth. Number of Shelves 2 no’s Made of CRCA Sheet. Material Thickness 0.8mm.Finish: Pre-treated & Powder Coated 60–80 micron thickness.Standard features: - Plastic handle locking with Foldable keys. Smooth Sliding rails. Adjustable shelves. Dual purpose shelves for Box File / Hanging files with 40 kg load carrying capacity per shelves. |
| 109 | Vertical Filing Cabinet.Dimensions: - 1335 mm Height x 465 mm Width x 620 mm Depth. Number of Drawers 4 no’s Made of CRCA Sheet. Material Thickness 0.8mm.Finish: Pre-treated & Powder Coated 60–80 micron thickness.Standard features: - Centralize Locking. Anti tilt Mechanism allow one drawer opening at a time for safety purpose. Smooth Full Extension Ball Bearing Runners with 40 kg load carrying capacity. Master Lock |
| 110 | Vertical Filing Cabinet.Dimensions: - 725 mm Height x 465 mm Width x 620 mm Depth. Number of Drawers 2 no’s Made of CRCA Sheet. Material Thickness 0.8mm.Finish: Pre-treated & Powder Coated 60–80 micron thickness.Standard features: - Centralize Locking. Anti tilt Mechanism allow one drawer opening at a time for safety purpose. Smooth Full Extension Ball Bearing Runners with 40 kg load carrying capacity. Master Lock |
| 111 | Steel Almirha Size.Size:- 6`H x 3`W x 1`D.Number of Shelves 5 no’s Made of CRCA Sheet. Material Thickness 20 guage.Finish: Pre-treated & Powder Coated 60–80 micron thickness. |
| 112 | Steel Almirha Size.Size:- 1218mm x 900mm x450mm.Number of Shelves3 no’s Made of CRCA Sheet. Material Thickness 20 guage.Finish: Pre-treated & Powder Coated 60–80 micron thickness. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
