Cmlrrp2020-21Azheekodan Smaraka Road Tarring In Pinarayi Gramapanchayath Cmlrrp2020-21Azheekodan Smaraka Road Tarring In Pinarayi Gramapanchayath
Tender Value
7.72 Lakhs
Estimated cost
Bid Submission
20 Aug 2021
0 days left
EMD
19400
Bank guarantee accepted
Document Fee
1808
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
pinarayi → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Cmlrrp2020-21Azheekodan Smaraka Road Tarring In Pinarayi Gramapanchayath Cmlrrp2020-21Azheekodan Smaraka Road Tarring In Pinarayi Gramapanchayath
BOQ
| Sl. No. | Item Description |
| 1 | Detailed Estimate |
| 2 | 3.15.2 : Compacting Original Ground (ii) Compacting original ground supporting subgrade Loosening of the ground upto a level of 300 mm below the subgrade level, watered, graded and compacted in layers to meet requirement of Tables 300.1 and 300.2 for subgrade construction as per Technical Specification Clause 303.5.2. |
| 3 | 4.9 : Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing thematerial with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, layingin uniform layers in sub-base/base course on a well prepared sub-base and compacting with smoothwheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406. By Mechanical Means with 1 km lead |
| 4 | 4.11.2 : Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal. Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408. (ii) Using Gravel mix soil. |
| 5 | 75.5.1.1pb : Prime Coat - Low porosity - With Packed Bitumen Rates Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502 |
| 6 | 75.5.2.3pb : Tack Coat - With Packed Bitumen Rates Providing and applying tack coat with Bitumen emulsion (RS-1)using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503. |
| 7 | od1099170/2020_2021 : Plastic Roads - Bitumen S-65 <br><br>20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder<br><br>Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508 (with 7% of bitumen replaced by shredded waste plastic)<br><br>Case - I By Manual Means<br><br>(II)Bitumen (S-65) (VG - 30) |
| 8 | 75.5.12.A.3.2pb : Seal Coat - Manual Means - Type C - Bitumen S-65 - Packed Bitumen Rates Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510 A. By Manual Means CaseIII :Type C (II) Bitumen (S-65) |
| 9 | od1108496/2020_2021 : Printing New Letters and Figures of any Shade<br>Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour<br>to give an even shade as per drawings and Technical Specification Clause 1701<br>Malayalam ( commas and the like not to be measured and paid for. Half letters shall be counted as half only) |
| 10 | od1108497/2020_2021 : Direction and place identification signs up to 0.9 sqm size board Providing and<br>erecting direction and place identifications sign boards made of 2 mm thick M.S. Sheet duly stove enameled<br>paint in yellow colour as per MORD specifications . Supported and welded on 2 Nos 100 x 20 x2mm<br>rectangular tube firmly fixed to the ground by means Plain cement concrete 1:3:6 |
| 11 | 3.5.3 : Excavation in Soil using Hydraulic Excavatorand Tippers with disposal upto 1000 mExcavation for roadwork in soil with hydraulic excavator of0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per Technical Specification Clause 302.3 |
| 12 | od1099241/2020_2021 : OD.11.4.1.1 (1:3:6 formwork excluded)-For drain bedProviding concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 I. P.C.C grade M 10 (i) Nominal mix 1:3:6 |
| 13 | od1099242/2020_2021 : (MOD 11.4.3.1 FOR WEARING COAT)Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203<br>III.P.C.C. grade M 20 <br>(i)Nominal mix (1:2:4) |
AI Tender Summary
Tender Timeline
Aug 11, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedAug 20, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 25, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender