Military Engineer Services-MES has published Repair Maintenance Of Int Electri Wiring Fitting And Fixture And Rewinding Overhauling And Painting Of Ceiling Fan Exhaust Fans Wall Mounted Fan Pedestal Fan And Air Circulators And Repair Maint Of Gi Strips Gi Earth Wire At Var Loc At Under Ge Af Jorh. Submission Date for this Tender is 31-08-2021. Electrical Maintenance Tenders in GE (AF) JORHAT Assam. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Taking down carefullypoint wiring (light, fans, socket etc) complete incl battens and fittings such as switch, ceiling rose, light fittings, regulators, socket etc and making good disturbed surface of wall/floor etc complete all as specified and directed. |
| 2 | M & L for point wiring with 1.5 sqmm FRLS grade PVC insulated and unsheathed stranded copper conductor cable,1100 volts grade as per IS-694drawn through and includingPVC cassing and capping (not less than 20 mm wide) complete with all acessoriesincluding PVC board/ box of suitable size for mounting of switches, sockets, regulators etc including 1.5 sq mmstranded copper conductor cable FRLS grade PVC insulated and unsheathed as erathing continuity conductor for One lightPoint controlled by one way switch complete by maintaining the colour code all as specified and directed. |
| 3 | -Ditto- all as per Ser item No 2 above but for One Ceiling /Exhaust Fan Point controlled by one way switch complete all as specified and directed. |
| 4 | -Ditto- all as per Ser item No 2 above but for 5 amps socket point on independent board complete all as specified and directed.. |
| 5 | -Ditto- allas per Ser item No 2 above but One 3 pin socket outlet for 5 amps on same board controlled by another switch, complete all as specified and directed.. |
| 6 | -Ditto- all as per Ser item No 2 above but for One bell point controlled by one bell push complete all as specified and directed.. |
| 7 | -Ditto- all as per Ser item No 2 above but with 2.5 sqmm cable for 15 amps socket outlet on independent board,but using 2.5 sqmm earth continuity conductor complete all as specified and directed. |
| 8 | -Ditto- all as per Ser item No 2 above but with 4 sqmm cable for 20/25 amps Power Unit on independent board,but using 4 sqmm earth continuity conductor complete all as specified and directed. |
| 9 | Supply and fixingceiling rose surface backelite three terminals, PVC/polycarbonate, insulated body complete all as specified and directed. |
| 10 | Supply and fixing switch piano flush type, 6 Amps 240 volts single pole one way complete all as specified and directed. |
| 11 | Supply and fixing socket outlet, 2 in 1,5 pin 6 Amps, flush type complete all as specified and directed. |
| 12 | Supply and fixing socket outlet 3 pin, 15/16 Amps, 6 in 1, flush type complete all as specified and directed. |
| 13 | Supply and fixing switch piano flush type,15/16 Amps 240 volts single pole one way complete all as specified and directed. |
| 14 | Supply and fixing stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. complete all as specified and directed. |
| 15 | Supply and fixing Switch Bell push flush type, 5 Amps 240 volts complete all as specified and directed. |
| 16 | M & L for One light point controlled by one switch with PVC cables 1.5 sq. mm size insulatedunsheathed FRLS cable 1100 volts grade ISI marked with multi stranded copper conductor drawn through and including non- metallic rigid PVC conduit medium grade and conduit accessories ISI marked concealed in wall / ceiling/ fixed to roofetc and including provision of 1.5 sqmm PVC insulatedmultistranded unsheathed copper conductor cable FRLS ISI marked as earth continuity conductor, fabricated steel sunken terminal box duly painted made out of 1.60mm thick MS sheet concealed in walls, with 3mm thick bakelite/PVC sheet ISI marked top cover with brass/chromium platedscrews and cup washers for housingswitches, socket outlets, fan regulators etc, all as specified and as directed for One LED tube light/LED Lamp/Bldg security light controlled by oneway switch, complete all as specified and directed. |
| 17 | -Ditto- all as per Ser item No 16 above but forOne Ceiling /Exhaust Fan Point controlled by one one way switch,complete all as specified and directed. |
| 18 | -Ditto- all as per Ser item No 16 above but for 5 amps socket point on independent board, complete all as specified and directed. |
| 19 | -Ditto- all as per Ser item No 16 above but for One bell point controlled by one bell push, complete all as specified and directed. |
| 20 | -Ditto- all as per Ser item No 16 above but with 2.5 sqmm cable for 15 amps socket outlet on independent board with 2.5 Sqmm earth continuty conductor complete all as specified and directed. |
| 21 | -Ditto- all as per Ser item No 16 above but with 4 sqmm cable for 20/25 amps Power Unit on independent board with 4 Sqmm earth continuty conductor complete all as specified and directed. |
| 22 | Supply and fixing switch piano modular type, 6 Amps 240 volts single pole one way complete all as specified and directed. |
| 23 | Supply and fixing socket outlet, 5 pin 6 Amps, Modular type, complete all as specified and directed. |
| 24 | Supply and fixing socket outlet6/16 Amps, 6 in 1, Modular type, complete all as specified and directed. |
| 25 | Supply and fixing switch piano modular type, 15/16 Amps 240 volts single pole one way complete all as specified and directed. |
| 26 | Supply and fixing modular plates with frame white colour 2 module complete all as specified and directed. |
| 27 | Supply and fixing modular plates with frame white colour 4 module complete all as specified and directed. |
| 28 | Supply and fixing modular plates with frame white colour 6 module complete all as specified and directed. |
| 29 | Supply and fixing modular plates with frame white colour 8 module complete all as specified and directed. |
| 30 | Supply and fixing switch Belll Push modular type single pole, complete all as specified and directed. |
| 31 | Supply and fixing Electric bell ding dong muscial type ,AC, 230 Volts, Single pole complete all as specified and directed. |
| 32 | Supply and fixing fan regulator electronic modulartype, 2 module,240 Volt,complete all as specified and directed. |
| 33 | Supply and fixing20 watt intregated LED tube light fitting 4 ft , suitable for single phase 230 Volts, 50 Hz AC supply andmounted on wall or ceiling,complete with all accessories internally prewired and including electrically connection withcopper conductor cable of size 0.5 Sqmm (nominal area)all as specified. Make -Crompton, Cat No.LCTLN-20-CDL or equivalent model in Philips/ Wipro as approved by GE. |
| 34 | Supply and fixing10 watt intregated LED tube light fitting 2 ft , suitable for single phase 230 Volts, 50 Hz AC supply andmounted on wall or ceiling,complete with all accessories internally prewired and including electrically connection withcopper conductor cable of size 0.5 Sqmm (nominal area)all as specified. Make -Crompton, Cat No.LCTLN-10-CDL or equivalent model inPhilips/ Wipro as approved by GE. |
| 35 | Supply and drawing submain wiring with two runs of single core 6 sqmm FRLS PVC insulated copper cable 1100 vots grade multistrand, unseathed conductor drawn into PVC casing and caping and all necessary fittings including 6 sqmm multi strand FRLS PVC insulated copper wire for earth continuty conductor connected to common earth dolly complete including taking down old unserviceable sub main wiring of any size and making good disturbed surface complete all as specified and directed. NOTE:- (i)Three runs of cable 6 Sqmm shall be measured as one RM of sub main wiring. |
| 36 | -Ditto- all as per Ser Item No- 36 above but two single core 4 Sqmm for phase & neutral and 01 single core 4 Sqmm for earth wire complete all as specified and directed.. NOTE:- (i)Three runs of cable 4 Sqmm shall be measured as one RM of sub main wiring. |
| 37 | -Ditto- all as per Ser Item No- 36 above but two single core 10 Sqmm for phase & neutral and 01 single core 10 Sqmm for earth wire complete all as specified and directed.. NOTE:- (i)Three runs of cable 10 Sqmm shall be measured as one RM of sub main wiring. |
| 38 | Taking down MCB DB/main switch of any size and making good disturbed surface of wall/floor complete all as specified. |
| 39 | Supply and fixSP&N DBs, double door, 240 volt,8 way complete all as specified and directed. |
| 40 | Supply and fixSP&N DBs, double door, 240 volt,4 way complete all as specified and directed. |
| 41 | Supply and fixVTPN DB , 415 volt,4 way, 200Amp Bus Barwith metal door with incomming MCCB 160Aamp,4 pole, 16KAcomplete all as specified and directed. |
| 42 | M&L for MCB single pole, 240 volts, 6 - 32 Amps, 10 KA complete all as specified and directed. |
| 43 | M&L for MCB single pole & neutral 240 volts 6-32Amps complete all as specified and directed. |
| 44 | Taking down Ceiling Fan/Exhaust Fan/ Wall Fan including ceiling cable of any Size/ Sweep and Make by disconnecting Electric Connection, dismantling Blades, Down Rod and removing Ceiling Fan to MES STORE YARD OF AGE E/M (AF) JORHAT for Check-ing, complete all as specified and as directed (Repair / painting shall be measured & paid separately). |
| 45 | M&L for Opening Stator of Ceiling Fan 1200mm / 1400mm Sweep Cleaning of Parts, Greasing of Moveable Parts and Re-assembling, after repair, testing Complete all as specified and directed. NOTE : Replacement of unserviceable Parts viz burnt coil, Ball Bearing, Bush, Capacitor, etc. shall be Measured and Paid separately under respective Items as mentioned here-in-after. |
| 46 | M&L for taking out burnt Coil of Ceiling Fan 1200mm Sweep, Cleaning the Segments complete and Re-winding the Same with Super Enamelled Copper Wire of same Gauge and same Weight with Insulation Paper, Varnishing and Heating, complete all as specified and as directed. |
| 47 | All as per Ser Item No. 47 above but Ceiling Fan 1400mm Sweep. |
| 48 | M&L for re-assembling the ceiling fan/ exhaust fan/ wall fan of any sweep after repairs and Testing, complete all as specified and as directed. |
| 49 | Supply & fixing Ball Bearing No. 6201 as approved suitable for Ceiling Fan of any Sweep and Make, complete all as specified and as directed. |
| 50 | Supply & fixing Ball Bearing No. 6202 as approved suitable for Ceiling Fan of any Sweep and Make, complete all as specified and as directed. |
| 51 | Supply & fixing Ball Bearing as ordered suitable for Exhaust Fan/Wall fan 300/400/450mm Sweep and complete all as specified and as directed. |
| 52 | Supply & fixing Capacitor 2.5 MFD 440 Volts AC 50Hz, suitable for Ceiling Fan of any Sweep and Make, complete all as specified and as directed. |
| 53 | Supply & fixing Capacitor 3.15 MFD 440 Volts AC 50Hz, suitable for Ceiling Fan of any Sweep and Make, complete all as specified and as directed. |
| 54 | Supply & fixing in replacement Split pin for Ceiling Fan of any Sweep and Make complete all as specified and directed. (as per sample) approved. |
| 55 | Supply & fixing Bush (Gun metal) including lathe machining work as approved suitable for Ceiling Fan of any Sweep and Make complete all as specified and as directed. (as per sample) approved. |
| 56 | Supply & fixing in replacement Down Rod as approved suitable for Ceiling Fan of any Sweep and Make complete all as specified and as directed. (as per sample) approved. |
| 57 | Supply & fixing Down Rod clamps with Rubber Reel of suitable size/as ordered including necessary Mild Steel Nut, Bolts, Washer etc. complete all as specified and as directed. (as per sample) approved. |
| 58 | M&L for preparing Surfaces of Ceiling Fan of any Sweep and Make, complete Body, Blade, Down Rod, Cleaning Dust, Dirts, etc. filling Cavities with Filler and applying One Coat DUCCO Paint with Spray Machine including Writing MES No. in Black Paint, complete all as specified and as directed. |
| 59 | Hanging only Ceiling Fan of any Sweep and Make and connecting up electric connection, from Ceiling Rose/Connector to Fan, including provn of cable from ceiling rose or connectior to fan complete all as specified and as directed. |
| 60 | M&L for earthingwith Galvanised steel earth plate electrode 600 x 600 x 6mm thickburried directly in ground vertically to a depth of not less than 2.25 mtr below ground level connected to GI strip 32 x 6 as earthing leadmeans of nut, bolts and washers made out of galvanised iron mild steel and 40 mm dia GI pipe "light grade" for protection of earth lead and connected to test point or as directedincluding PCC Pit in Cement Concrete 1:3:6 (20mm Graded Stone Aggregate) and RCC Cover of size 450X450X50mm in RCC 1:2:4 (20mm Graded Stone Aggregate) rein-forced with and including 8.0mm dia TMT Bars @ 100mm centre to centre both ways, Galvanised Iron Wire Mesh, Funnel, Galvanised Iron Watering Pipe 20mm Bore (dia) Medium Grade, necessary Excavation in Soft/ Loose Soil, returning, filling in and removal of surplus Soil upto a distance of 50.00 mtr and all as shown in Electrical Plate No. 5 of MES Schedule Part-I and Testing on completion , including taking down unserviceable earthing complete all as specified and as directed Engr-in-charge. |
| 61 | M&L for earthing complete with copper plate electrode 60cmx60cmx3.15 mm thick, buried directly in ground (earth pit not less than 2.25 mtrsdeep below ground level) with top edge of the platenot less than 1.5 mtrs below normal ground level,connected tocopper strip 20x3 mm as earthing leadby means of bolts, nuts, check nutsand washers of galvanised iron or steel all as shownin electrical plate No 3 in SSR Part I of 2009 connected to eartingtest point all as specified and directed complete withexcavation & earth work, PCC pit with 50mm thickRCC coverhaving suitable handle(10mm MS Rod) 20mm dia GI medium gradewatering pipe with GI funnel with wire mesh 40mm bore GI pipe medium grade ISI marked) forprotection of earth leadconductorall as directed and testing on completion. |
| 62 | M&L Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. 25x3mm aluminium strip complete all as specified and directed. |
| 63 | M&L Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. but 32x6mm galvanised iron strip complete all as specified and directed. |
| 64 | S&F Galvanised iron pipe 40 mm bore dia,light grade with all fitting laid in trenches for mechanical protection of earth strip of chemical earthing etc including taking down unserviceable. |
| 65 | Supply and fixing in repair surface mounting LED 2ft x2ft luminaire of capacity 36W with white powder coated CRCA housing with LEDs and full window acrylic diffuser etc.complete with all acessories internally prewired suitable for sigle phase 230volts 50Hz AC supply including connecting up with flexible copper conductor cable of size 0.5 Sqmm (nominal area) complete all as specified. Make -Crompton, Cat No.LCTLSNE-36-FO-CDL or equivalent model in Philips/ Wipro as approved by GE. |
| 66 | Supply and fixing in repair recessed mounted LED 1ft x4ft luminaire of capacity 40W with white powder coated CRCA housing with LEDs and full window acrylic diffuser etc.complete with all acessories internally prewired suitable for sigle phase 230volts 50Hz AC supply including connecting up with flexible copper conductor cable of size 0.5 Sqmm (nominal area) complete all as specified. Make -Crompton, Cat No.LCTLRN-40-CDL(1X4) or equivalent model in Philips/ Wipro as approved by GE. |
| 67 | S&F in repair for building security light30 watt LED light fitting, new generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP-65 roadway luminaire with high power LEDs as light source & exclusively designed polycarbonate cover alongwith electronic driver, complete after taking down old unserviceable light fitting all as directed. Make:Crompton, Cat No.LSTS-30-CDL-M or equivalent model in Philips/ Wipro as approved by GE. |
| 68 | S&FCeiling fans 1200mm sweep after taking down the old unserviceable ceiling fan 1200 mm and connecting up complete including provision of cable 3 core of size 0.5 Sq mm (16/0.2 mm) copperISI marked from ceiling roseto fan including making necessary fixing arrangements in the existing RCC ceiling /roof with suitable anchor fastners as specified to hold the fan all as directed. Make : Usha Cat No. : Apollo LX or equivalent model in Crompton, Havells, Bajaj as approved. Note : U/S ceiling fan shall be deposited in MES Store yard. |
| 69 | Supply and fix electronic meters temper proof LCD display with polycarbonate cover 230 V, 10-60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time,current reading, load, PF, voltage and KWHcomplete all as specified and as directed. |
| 70 | Supply and fix MCB protected POWER UNIT with one 25 amps socket, (incl 3 Pin Plug Top)including MCB DP and starter 25 Amps rating with six module plate and flush metal GI box and electrically connecting up fixed in repair complete all as specified and directed. Make : Havells cat No- DHDUCDP0253016-25 (25 Amps) OR any equivalent model in INDOASIAN/C&S ELECTRIC LTD as approved by GE. Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule "A"/BOQ. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
