|
| 1 | Earthwork |
| 2 | Earth Work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of Soil. |
| 3 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. Ordinary Rock |
| 4 | Extra for every additional Lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. All kinds of soil |
| 5 | Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. Ordinary rock |
| 6 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) PCC: M20 |
| 8 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement: All work up to plinth level |
| 9 | 1:0.75:1.5 (1 cement : 0.75 coarse sand : 1.5 graded stone aggregate 20 mm nominal size). RCC M30 |
| 10 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : |
| 11 | 1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size). RCC M25 |
| 12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 13 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 14 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. |
| 15 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 16 | CENTRING AND SHUTTRING |
| 17 | Centring and Shuttering for Foundations, footings, bases of columns, etc. for mass concrete |
| 18 | Centring and shuttering for Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 19 | Centring and shuttering for Columns, Pillars, Piers, Abutments, Posts and Struts |
| 20 | Centring and Shuttering for Suspended floors, roofs, landings, balconies and access platform |
| 21 | MASONRY & PLASTER WORK |
| 22 | Random Rubble Masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 23 | Providing and fixing up to floor five level Precast Cement Concrete Solid Block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete : 1:3:6 (1 Cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 24 | Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) :Red Sand Stone - Exposed face fine dressed with rough backing ( 50 mm )* Locally Available Regional HImalyan Stone is proposed instead of Red Sand Stone |
| 25 | Floor : 450mm x 350 mm x 30 mm |
| 26 | Wall : 450 mm x 350 mm x 50 mm |
| 27 | 12 mm Cement Plaster of mix : 1: 6 (1 cement: 6 fine sand) |
| 28 | 12 mm Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement |
| 29 | FLOORING |
| 30 | Providing and laying Vitrified Floor Tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm |
| 31 | Providing and laying Vitrified Floor Tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete ( 300 x 600 ) |
| 32 | Providing and laying Anti Skid Vitrified Floor Tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete ( 600 x 600 ) |
| 33 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. |
| 34 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shadeArea of slab upto 0.50 sqm |
| 35 | DOOR & WINDOW WORK |
| 36 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).( Second class saal wood ) |
| 37 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as perdirection of Engineer-in-charge. (Note:- Butt hinges and necessary screws shallbe paid separately)Second class teak wood( 35 mm thick shutters ) |
| 38 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains orcross bands and face veneers on both faces of shutters: 459 SUB HEAD : 9 - WOOD & PVC WORK35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 39 | Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive,including cleaning etc. complete. |
| 40 | DOOR FITTINGS ( ALUMINIUM ) |
| 41 | Providing and fixing bright finished brass handles with screws etc. complete: ( 125 mm ) |
| 42 | Same as above but 75 mm |
| 43 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :( 200 x 10 mm) |
| 44 | Same as above but (150 x 10 mm) |
| 45 | Same as above but (100 x 10 mm) |
| 46 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete |
| 47 | Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 100 x 85 x 5.5 mm (heavy type) |
| 48 | Same as above but75x65x4 mm |
| 49 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. |
| 50 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 51 | Structural steel work riveted, bolted or welded in HOT FINISH SEAMLESS TYPE ( SQUARE OR RECTANGULAR HOLLOW TUBE TYPE ) built up sections , wooden finish, for all kinds of shape & size of column work, including cutting, hoisting, fixing in position and applying a primer coat of approved zinc primer and 2 coats of oil paints of Asian, ICI or equivalent make as approved by architect in due respect to complete all. |
| 52 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding |
| 53 | Truss Work |
| 54 | WOOD WORK |
| 55 | P/ F Teak wood hand rail having size of 90 mm x 75 mm size with approved decorative shape etc.. |
| 56 | 25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with : |
| 57 | P/F Deodar WoodJhalar (Manually Hand Carved) in 25 mm thick 300 mm wide deodar wood plank. |
| 58 | Providing, laying and fixing of Deodar Wood as in built runner having size of 100 mm X 100 mm thru out over masonary course during construction of wall as per detail drawing. It allows to apply adhesive on top and bottom of wood surface with additional fixing accessories of GI nut & bolt/ anchor fastners, nails, screws etc.. to masonary work or provided RCC runner to protect against demormation with all due respect to complete the job.manufacturer specification. |
| 59 | \"Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).{ We proposedSal Wood } |
| 60 | FINISHING & PAINTING WORK |
| 61 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 62 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 63 | Painting with black ( or as per specification ) anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two or more coats on new work |
| 64 | French spirit polishing :Two or more coats on new works including a coat of wood filler |
| 65 | Providing and laying Water Proofing Treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed bywater curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around.(d) fourth and final layer of brick tiling with cement mortar (which will be paidfor separately.For the purpose of measurement the entire treated surface will be measured. |
| 66 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.90 mm (+ 0.05 %), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 67 | 1.00 mm thick with zinc coating not less than 275 gm/m² |
| 68 | Specified Roofing sheet material having 1.0 mm thick pre coated GI Sheet ofas per manufacturere specification. Notes: 1) It allows making connections attractive and weatherproof\". 2) It allows for weatherproof roof penetrations. 3) It allows to complete entire roofing system at level of satisfaction in due respect. 4) It allows for Deodar WoodJhalar (Manually Hand Carved) in 2 inch thick 300mm wide deodar wood plank. Providing ridges or hips of width 60 cm overall width plian G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8mm dia G.I. Limpet and bitumen washers |
| 69 | 0.80 mm thick with zinc coating not less than 275 gm/m² |
| 70 | Sanitary fixutures and fittings |
| 71 | Providing and fixing wash down wall mounting EWC-P of approved shade, conforming to Pattern 2 of IS: 2556 (Part -II), with SWR Self it Soil PVC pipe and plug bend as per specifications;glazed vitreous / ColouredEuropean Water Closet with metropole flush valve, with grouting the CI chair in side the floor/wall, rubber gaskets, connecting PVC 110mm dia soil pipe with PVC coupling, nuts, mounting cistern on WC.,1 No.CPVC connection with brass union nuts CP coated and solid verity heavy duty plastic seat cover as per IS-2548, of approved make; including painting of fittingsand brackets, cutting and making good the walls wherever require: etc. complete.The rates including cost and conveyence of all materials, labour, machinery etc.EWC-P with Soft close Seat cover : Jaquar, Model No:CNS-WHT-959SMetropole flush valve Dual flow : Jaquar, Model No: FLV-1085NG |
| 72 | Providing and fixing White glazed vitreous Wash Basin Oval Under-Counter, size 550 x 425 x 195 mm dia.,with supporting M.S. or C.I. Brackets, necessary pipe connection up to the outside face of the wall,having Telephonic Black / Colour Granite of 180 mm thick fixed on Black Kadappa Framework, Waste coupling 32 mm size full thread with 80 mm height Chrome plated, Bottle trap Chrome plated Basin Mixer necessary fittings with wall Flange etc. complete in all respects including cutting and making good the walls etc. OVAL UNDER COUNTERBASIN: Jaquar Continental, Model No: FLS-WHT-5701WASTE COUPLING : Jaquar , Model No: ALD-CHR-705BOTTLE TRAP : Jaquar , Model No: ALD-769L300X190Basin Mixer: Jaquar , Model No: FLR-5001B |
| 73 | Providing and fixing stainless steel single bowl sink with side plate with drain board, R.S. or C.I. Painted brackets painted, 40mm dia. C.P. waste coupling, bottle trap Jaquar Continental, , C.P. brass chain and rubber plug, strainer with necessary C.P. brass unions complete including painting the fittings and cutting and making good the walls wherever required etc. complete the job.Sink: NIRALI -Olympia Small -Satin- 950 MM X 510 MMWASTE COUPLING : Jaquar ,Model No: ALD-705L130BOTTLE TRAP : Jaquar , Model No: ALD-769L300X190 |
| 74 | Providing and fixing 15mm C.P. brass angle valve with C.P. copper connecting pipe 450 mm long and nuts, washer and brass flange complete, including cutting and making good the wall where required. ANGLE VALVE : Jaquar, Model No. FLR-5053NBRAIDED HOSE Copper Pipe : Jaquar, Model no. ALD-CHR-805B |
| 75 | Providing and fixing in position 15 mm C.P. brass bib cocks of best quality necessary fittings with wall Flange etc. complete in all respects including cutting and making good the walls etc.BIB COCK : Jaquar Fusion , Model No. FUS-29037 |
| 76 | Providing and fixing in position 15 mm C.P. brass long body bib cocks of best quality necessary fittings with wall Flange etc. complete in all respects including cutting and making good the walls etc.BIB COCK : Jaquar Continental, Model No: CON-107KN |
| 77 | Providing and fixing in position 15 mm C.P. 2 Waybib cock with angle Valve of best quality necessary fittings with wall Flange etc. complete in all respects including cutting and making good the walls etc.2 Way BIB COCK : Jaquar Fusion , Model No: FLR 5041 N. |
| 78 | Providing and fixing of Hand Shower (Health Faucet), with 8mm Dia,1Rmt Long pvc Tube and Wall Hook accessories of best quality necessary fittings with wall Flange etc. complete in all respects including cutting and making good the walls etc. HAND SHOWER : Jaquar , Model No: ALD-573 |
| 79 | Providing and fixingSink cockof best quality necessary fittings with wall Flange etc. complete in all respects including cutting and making good the walls etc.Jaquar , Sink Cock: Model No. FLR-5347N |
| 80 | Providing and fixingSink mixer of best quality necessary fittings with wall Flange etc. complete in all respects including cutting and making good the walls etc.Single level Sink Mixer: Jaquar Fusion, Model No. FUS-29173B |
| 81 | Providing and fixing 20mm dia. Concealed Stop Cock with Exposed Part Kit of best quality necessary fittings with wall Flange etc. complete in all respects including cutting and making good the walls etc.Jaquar: Molde no.: ALD-CHR-089 20mm dia., Exposed Part Kit of Concealed Stop Cock with Fitting : FUS-CHR-29083K |
| 82 | Providing and fixing 25mm dia. Concealed Stop Cock with Exposed Part Kit of best quality necessary fittings with wall Flange etc. complete in all respects including cutting and making good the walls etc.Jaquar Concealed Stop cock : Model No. ALD-081Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve: FUS-29083K |
| 83 | Providing and fixing grab bar fabricated seamless stainless steel tubein bath room with non slip gripping surface, polished wall flange at end of bars with heavy duty anchor fasteners and accessories etc complete the job.GRAB BAR: Jaquar: Model no. AHS-1507 |
| 84 | Providing and fixing CP BrassSingle Leaver thermostatic diverter of quality & make as approved by Engineer in charge.Single Leaver thermostatic diverter : Jaquar Continental, Model No: CON-421 |
| 85 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameterOVERHEAD SHOWER: Jaquar Continental, MODEL NO. OHS-1789 |
| 86 | Providing and fixing in position best Indian make toilet recessed type paper holder complete in all respects including cutting and making good the walls etc. TOILET PAPER HOLDER : Jaquar , Model No: AHS-1553 |
| 87 | Providing & fixing C.P. brass towel ring fixed to rawl plug with C.P. brass screws.TOWEL RING : Jaquar Continental, Model No.: ACN-1121BN |
| 88 | Providing & fixing towel rail of approved make including, providing & fixing C.P. brass screws, making holesin walls & making good. TOWELRAIL: Jaquar Continental, Model No. ACN-1111SM |
| 89 | Providing & fixing of Tumbler Holder, with all accessories to complete the item.TUMBLER HOLDER : Jaquar Continental, Model No. ACN-1141N |
| 90 | Fixing stainless steel recessed type soap dish of approved make. Including providing&fixing screws, washers, cutting & making good the walls.SOAP DISH : Jaquar, Model No: AKP-35731P |
| 91 | Providing and fixing C.P. brass liquid soap container of best quality. LIQUID SOAP CONTAINER: Jaquar , Model No: SDR-WHT-DJ0010F |
| 92 | Providing and fixing in position best Indian make C.P. brass twin way QUOTE and hat hooks fixed into wall with C.P. Brass screws and rawlplugs etc. complete including cutting and making good the walls etc.DOUBLE QUOTE HOOKS: Jaquar, Model No: -ACN-1161N |
| 93 | Providing and fixing of electrical Storage type water Geyser inclusing all required accessories cutting, chassing and good the same.25 Litre Storage, Make:Jaquar Elena |
| 94 | Electrical hand dryer, fully automatic type , cover shall be fabricated in extra heavy duty18 gauge type 304 SS with exposed surfaces satin finished, the unit shall deliver not less than 71 l/secof hot air and electrical rating shall be 240 V / 1 phase / 50 cycles HAND DRYER : Jaquar , Model No: HDR-WHT-M04A |
| 95 | Providing and fixing C.P. brass air purifier fixed to wooden cleats with C.P. brass screws complete. Air Purifier: Euronics , Model No: EA-03 |
| 96 | Internal drainage and rain water |
| 97 | Providing, Fixing, testing & commissioning of 50 mm Outer dia HDPE soil & waste Pipe as per EN 12056, DIN 4102-B2 complete including all fittings, specials, jointing & hydraulic testing the joints & pipes as mentioned in the specification etc. and making connection with down take wherever required to satisfaction of engr / arch with proper care, protecting fittings & pipes till the final handing over etc as directed by E-I-C complete as per specifications & drawing provided for all places, all heights & all levels as per direction of engineer in charge. |
| 98 | Providing, Fixing, testing & commissioning of 75 mm Outer dia HDPE soil & waste Pipe as per EN 12056, DIN 4102-B2 complete including all fittings, specials, cowl,jointing & hydraulic testing the joints & pipes as mentioned in the specification etc. and making connection with down take wherever required to satisfaction of engr / arch with proper care, protecting fittings & pipes till the final handing over etc as directed by E-I-C complete as per specifications & drawing provided for all places, all heights & all levels as per direction of engineer in charge. |
| 99 | Providing, Fixing, testing & commissioning of 110 mm Outer dia HDPE soil & waste Pipe as per EN 12056, DIN 4102-B2 complete including all fittings, specials, cowl, jointing & hydraulic testing the joints & pipes as mentioned in the specification etc. and making connection with down take wherever required to satisfaction of engr / arch with proper care, protecting fittings & pipes till the final handing over etc as directed by E-I-C complete as per specifications & drawing provided for all places, all heights & all levels as per direction of engineer in charge. |
| 100 | Providing, Fixing, testing & commissioning of 160 mm Outer dia HDPE soil & waste Pipe as per EN 12056, DIN 4102-B2 complete including all fittings, specials, jointing & hydraulic testing the joints & pipes as mentioned in the specification etc. and making connection with down take wherever required to satisfaction of engr / arch with proper care, protecting fittings & pipes till the final handing over etc as directed by E-I-C complete as per specifications & drawing provided for all places, all heights & all levels as per direction of engineer in charge. |
| 101 | Providing & fixing HDPE P Trap of 110mm dia diameter With Height riser/necessary distance piece for wash basin/sink/Urinal drain connection with and 150x150mm heavy duty openable grating, making necessary SLAB /WALL/Beam holes and cutting walls, etc complete. |
| 102 | Providing and fixing 100 mm sand cast Iron grating for P trap. |
| 103 | Providing and fixing of 110 mm Outer dia HDPE PE 100, PN-6 SEWER pipes confirming to IS:14333-2000, fusion welded Joint, including all fittings,special, testing of joints,including trenching, refilling & testing of jointsetc. complete as per direction of Engineer-in-Charge. |
| 104 | Providing and fixing of 160 mm Outer dia HDPE PE 100, PN-6 SEWER pipes confirming to IS:14333-2000, fusion welded Joint, including all fittings,special, testing of joints,including trenching, refilling & testing of jointsetc. complete as per direction of Engineer-in-Charge. |
| 105 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. |
| 106 | Providing and fixing of 75 mm diameter on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 107 | Providing and fixing of 110 mm diameter on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 108 | Internal water supply work |
| 109 | Providing and fixing of 20 mm Outer dia 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineerin- Charge. Internal Exposed on walls |
| 110 | Providing and fixing of 25 mm Outer dia 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineerin- Charge. Internal Exposed on walls |
| 111 | Providing and fixing of 32 mm Outer dia 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineerin- Charge. Internal Exposed on walls |
| 112 | Providing and fixing of 40 mm Outer dia 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineerin- Charge. Internal Exposed on walls |
| 113 | Providing and fixing of 50 mm Outer dia 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineerin- Charge. Internal Exposed on walls |
| 114 | Providing and fixing of 63 mm Outer dia 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineerin- Charge. Internal Exposed on walls |
| 115 | Providing and fixing of 75 mm Outer dia 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineerin- Charge. Internal Exposed on walls |
| 116 | Providing and fixing of 90 mm Outer dia 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineerin- Charge. Internal Exposed on walls |
| 117 | Providing and fixing of 20 mm Outer dia 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge.Concealed work,including cutting chases and making good the wall etc. |
| 118 | Providing and fixing of 25 mm Outer dia 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work,including cutting chases and making good the wall etc. |
| 119 | Providing and fixing of 32 mm Outer dia 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work,including cutting chases and making good the wall etc. |
| 120 | Providing and fixing of 40 mm Outer dia 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work,including cutting chases and making good the wall etc. |
| 121 | Providing and fixing of 50 mm Outer dia 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work,including cutting chases and making good the wall etc. |
| 122 | Providing and fixing of 50 mm Outer dia 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge. |
| 123 | Providing and fixing of 63 mm Outer dia 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge. |
| 124 | Providing and fixing of antifreez flexibleheating cable Raychem XL- 26XL2-ZH, output26 watts per Meter @ 5 Degree celcius, cold applied conduit for water protection, Pipe strap for required diameter and all required accessories forHeat Tracing of water supply piping, etc. complete the job. |
| 125 | Providing and fixing Insulation entry kit for antifreez flexibleheating cable Raychem and all required accessories etc. complete the job. |
| 126 | Providing and fixing of power connection box with integral 2M power cable for antifreez flexibleheating cable Raychem and all required accessories etc. complete the job. |
| 127 | Providing and fixing ofT connection for 3 Cables for antifreez flexibleheating cable Raychem and all required accessories etc. complete the job. |
| 128 | Providing and fixing ofGlass tape for antifreez flexibleheating cable Raychem and all required accessories etc. complete the job. |
| 129 | Providing and fixing ofThermostate lower temperature upto -15 degree celcius & Controller for antifreez flexibleheating cable operation for pipe freezing protection & Warning Label in English Bold Latter and all required accessories etc. complete the job. |
| 130 | Providing and fixing ofAluminium adhesive tape for antifreez flexibleheating cable Raychem and all required accessories etc. complete the job. |
| 131 | Providing and fixing 9mm thick preformed syntheic rubber polymeric compound prefromed sleeves with all accessories & clamp, support , etc. (Inside Toilet) for 20 dia pipe |
| 132 | Providing and fixing 9mm thick preformed syntheic rubber polymeric compound prefromed sleeves with all accessories & clamp, support , etc.(Inside Toilet) for 25 dia pipe |
| 133 | Providing and fixing 9mm thick preformed syntheic rubber polymeric compound prefromed sleeves with all accessories & clamp, support , etc. (Inside Toilet) for 32 dia pipe |
| 134 | Providing and fixing 9mm thick preformed syntheic rubber polymeric compound prefromed sleeves with all accessories & clamp, support , etc. (Inside Toilet) for 40 dia pipe |
| 135 | Providing and fixing 9mm thick preformed syntheic rubber polymeric compound prefromed sleeves with all accessories & clamp, support , etc. (Inside Toilet) for 50 dia pipe |
| 136 | Supply, installation, laying of Insulation of\"50\" mm thick PUF Section having density of 36 to 40 Kg/M3 covered with UV Paint Workfor 20MM diameter Pipe and inbsulation shall be covered with 3MM HDPE/Approved Equivalent protective coating over the pipe with all accessories and clamp, support. The pipe shall be applied with VOC free water based adhesive only. Insulation shall be for all pipes complete with required elbows (short and long), Tees, Reducers, flanges, fittings as required. |
| 137 | Supply, installation, laying of Insulation of\"50\" mm thick PUF Section having density of 36 to 40 Kg/M3 covered with UV Paint Workfor 25MM diameter Pipe and inbsulation shall be covered with 3MM HDPE/Approved Equivalent protective coating over the pipe with all accessories and clamp, support. The pipe shall be applied with VOC free water based adhesive only. Insulation shall be for all pipes complete with required elbows (short and long), Tees, Reducers, flanges, fittings as required. |
| 138 | Supply, installation, laying of Insulation of\"50\" mm thick PUF Section having density of 36 to 40 Kg/M3 covered with UV Paint Workfor 32MM diameter Pipe and inbsulation shall be covered with 3MM HDPE/Approved Equivalent protective coating over the pipe with all accessories and clamp, support. The pipe shall be applied with VOC free water based adhesive only. Insulation shall be for all pipes complete with required elbows (short and long), Tees, Reducers, flanges, fittings as required. |
| 139 | Supply, installation, laying of Insulation of\"50\" mm thick PUF Section having density of 36 to 40 Kg/M3 covered with UV Paint Workfor 40MM diameter Pipe and inbsulation shall be covered with 3MM HDPE/Approved Equivalent protective coating over the pipe with all accessories and clamp, support. The pipe shall be applied with VOC free water based adhesive only. Insulation shall be for all pipes complete with required elbows (short and long), Tees, Reducers, flanges, fittings as required. |
| 140 | Supply, installation, laying of Insulation of\"50\" mm thick PUF Section having density of 36 to 40 Kg/M3 covered with UV Paint Workfor 50MM diameter Pipe and inbsulation shall be covered with 3MM HDPE/Approved Equivalent protective coating over the pipe with all accessories and clamp, support. The pipe shall be applied with VOC free water based adhesive only. Insulation shall be for all pipes complete with required elbows (short and long), Tees, Reducers, flanges, fittings as required. |
| 141 | Supply, installation, laying of Insulation of\"50\" mm thick PUF Section having density of 36 to 40 Kg/M3 covered with UV Paint Workfor 63MM diameter Pipe and inbsulation shall be covered with 3MM HDPE/Approved Equivalent protective coating over the pipe with all accessories and clamp, support. The pipe shall be applied with VOC free water based adhesive only. Insulation shall be for all pipes complete with required elbows (short and long), Tees, Reducers, flanges, fittings as required. |
| 142 | Supply, installation, laying of Insulation of\"50\" mm thick PUF Section having density of 36 to 40 Kg/M3 covered with UV Paint Workfor 75MM diameter Pipe and inbsulation shall be covered with 3MM HDPE/Approved Equivalent protective coating over the pipe with all accessories and clamp, support. The pipe shall be applied with VOC free water based adhesive only. Insulation shall be for all pipes complete with required elbows (short and long), Tees, Reducers, flanges, fittings as required. |
| 143 | Supply, installation, laying of Insulation of\"50\" mm thick PUF Section having density of 36 to 40 Kg/M3 covered with UV Paint Workfor 90MM diameter Pipe and inbsulation shall be covered with 3MM HDPE/Approved Equivalent protective coating over the pipe with all accessories and clamp, support. The pipe shall be applied with VOC free water based adhesive only. Insulation shall be for all pipes complete with required elbows (short and long), Tees, Reducers, flanges, fittings as required. |
| 144 | Providing and fixing of 40mm diameter gun metal gate valve with C.I. wheel of approved quality |
| 145 | Providing and fixing of 50mm diameter gun metal gate valve / scour valve with C.I. wheel of approved quality |
| 146 | Providing and fixing of 65mm diameter gun metal gate valve with C.I. wheel of approved quality |
| 147 | Providing and fixing of 25 mm nominal bore ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 148 | Providing and fixing of 50mm diameter gun metal non- return valve (vertical) of approved quality |
| 149 | Providing and fixing of 50mm diameter C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) : |
| 150 | Providing andfixing mosquito proof stainless steel overflow gratingfor tanks.( Zoloto/ Audco/ R.B./ Spirex) |
| 151 | Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately. |
| 152 | Supplying, fitting & fixing of 40mm dia Pressure Reducing Valve set of approved make & best quality having by-pass arrangement consisting of the following:- |
| 153 | Supplying, fitting & fixing of 50mm dia Pressure Reducing Valve set of approved make & best quality having by-pass arrangement consisting of the following:- |
| 154 | Supply installation, testing and commissioning of drinking water filtration system comparision of multigrade sand filter, activated carbon filter, Ultra-filtration & High penetration Ultraviolet. The scope shall include interconnection piping, valves, instruments & pump system, all other required accessories, pump set is auto operation, including dry run protection,all valve controls, interconnecting piping of suction and discharge header, control panel, nterlocking arrangement, level controller and other necessary cabeling works etc. complete the job. Capacity: 120LPH |
| 155 | O & M FOR 5 YEARS |
| 156 | Operation and maintanance for 5 year for all parts as per above BOQ |
