Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 01-09-2021 | Due Date Extended | Admin Corrigendum Date Extend | 02-09-2021 |
| 2 | 30-08-2021 | Due Date Extended | Admin Corrigendum Date Extend | 31-08-2021 |
| Sl. No. | Item Description |
| 1 | Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in lead of 50 mtr. All kinds of soil. |
| 2 | Filling available excavated earth (excluding rock) in trernches, plinth side of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering including lead upto 50 meter and lift upto 1.5meter |
| 3 | Providing and laying in position cement concrete including curing compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level using crusher broken aggregate. M 10 grade Nominal mix (withgraded stone aggregate 40mm nomimal size.) |
| 4 | Centering & shuttering with plywood or steel sheets including strutting , propping bracing both ways and removal of formworks for foundation in basement rafts, straps, beams, bases of columns etc. upto plinth level. |
| 5 | RR Stone masonry for Foundation and plinth in cement sand mortar above 30cm thick wall in : Cement mortar 1:6 (1Cement: 6 sand) |
| 6 | Centering & shuttering with plywood or steel sheets including strutting , propping bracing both ways with wooden members and removal of formworks forupto floor three level for: Columns,pillars posts and struts etc. |
| 7 | Providing and laying in position specified grade of reinforced cement concrete including curing compaction finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement.All work up to plinth level : M20 Grade nominal mix ( with graded stone aggregate 20 mm nominal size) |
| 8 | Providing & laying in position specified grade ofcement concrete for RCC structure elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 ( 1cement: 3sand ) and making good the joints excluding the cost of centering, shuttering and reinforcement for Walls (any thickness) including attaches pilasters buttresses, plinth and string courses fillets column pillars pears abutments posts struts etc. M 20 grade nominal mix (with graded stone aggregate 20 mm nominal size) |
| 9 | RR dry stone kharanja under floor |
| 10 | Brick masonry in superstructure upto third storey Using brick of designetion 75 in cement mortar 1:6 ( 1 cement: 6 coarse sand ) |
| 11 | Half brick masonry in superstructure up to third story using bricks of designation 75 with nominal hoop rainforsed (2 Nos. 6mm MS bar) at every fourth course in for hoop rainforcement 1Sqm. 6mm MS bar 2x2x1.00 = 4.00 Cement mortar 1:4 (1-Cement:4-coarse sand). |
| 12 | Centering & shuttering with plywood or steel sheets including strutting , propping bracing both ways with wooden members and removal of formworks forupto floor three level for suspended floors, rofs, landings staircases, balconies, girders, cantilevers, bands, coping, bed plates, anchor blocks, sills, chhajjas, lintel beam etc. |
| 13 | Providing & laying in position specified grade of cement concrete for RCC structural elements upto three floorlevel including curing, compaction, finishing with rendering in cement sand mortar 1:3 ( 1cement: 3 coarse sand ) and making good the joints excluding the cost of centering, shuttering and reinforcement for beams, suspende floors, roofs, griders, having slope upto 15, landings, balconies, shelves, chajjas, lintel,bands, plain window sills, staircases and spiral staircases. M20 grade Nominal Mix (with graded stone aggregate20mm nominal size) |
| 14 | Providing & fabricating reinforcement for RCC work including straightening, cutting, bending, placing in position and binding (including cost of binding wire ) all complete upto floor three level. Thermo Mechanically Treated Bars (IS : 1786 ) |
| 15 | Plaster on new surface on walls in cement sand mortar 1:6 including raking of joints etc. complete fine finished 20mm thick. |
| 16 | 6mm Cement plaster to ceiling of mix 1:3 (1 cement : 3 fine sand) |
| 17 | Polished Kota Stone flooring skirting, laid over 20 mm thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete : For area of each slab up to 2001 to 5000Sq. Cm : 20 mm thick slab. |
| 18 | Polished Kota Stone flooring skirting, laid over 20 mm thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete : For area of each slab up to 900 Sq. Cm : 20mm thick. |
| 19 | PolishedKota stone slab in steps, walls, pillars, having fine machine cut edges laid on 12mm (Av.) thick cement mortar 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. 25mm thick slab area 2001 to 5000 sq.cm |
| 20 | Providing and fixing Granite stone slab thickness 16-18 mm mirror polished and machine cut in walls, pillars, steps, Shelves, Counters, Floors, etc. laid on 12 mm (Av) thick base of cement mortar 1:3 ( 1 cement : 3 coarse sand ) jointing with white cement mortar 1 : 2 ( 1 white cement : 2 marble dust ) with pigment to match the shade of the granite slab complete including rubbing and polishing of : Green / Black / Other granite Above 3601 Cm2 Slabs |
| 21 | Supplying and fixing machine cut and polished stone shelves, tands and sills in CM 1:3 with machine cut edges: Kota stone 25 to 30 mm thick. |
| 22 | Providing & fixing precast cement concrete coping 1:2:4 mix 50mm thick complete as per specification. |
| 23 | Providing brick kharanja in cement sand mortar 1:4 in square pattern over roof of ground floor 75mm to 100mm thick average |
| 24 | Crazy marble stone flooring 20 mm thick marble stone with black or of specified colour topping including filling the gaps with cement marble chips mix in proportion of 4:7 (4-Cement:7-White black or white or black marble chips) size from 1 mm to 4 mm by volume and under layer of 25 mm thick cement concrete [1:2:4, graded stone aggregate 12.5 mm nominal size] rubbing and polishing and cement slurry etc. complete : In ordinary cement |
| 25 | Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finished with cement mortar 1:3 as per standard design. |
| 26 | Providing and fixing Ist quality standard White Ivory Glazed Tiles ISI marked [IS:13753] of size 300mm x 200mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster). Category-I : Kajariya, Jhonson, Orient, Somani make etc. |
| 27 | Providing and fixing Ist quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 colour such as white, grey, ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slsurry including nicely finished joints using water proof joint filler power (Untile or Roffe make) and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster). |
| 28 | Providing and laying Chequerred plain cement concrete embossed specially manufactured non-slipping tiles of approved make 20 mm thick laid on 20 mm thick bed of cement mortar 1:6 jointed with neat cement slurry complete. Add extra for chequerred coloured plain cement concrete or specially manufactured non-slipping tiles of approved make 20 mm thick. |
| 29 | Supply and fixing in cement mortar welded hand railing made out of M.S. round or square bars, flats etc. for staircase or verandah as per design complete in all respect (wooden or PVC hand railing to be paid extra) with priming coat of red oxide. |
| 30 | Cement concrete flooring grade 1:2:4 (1 cement : 2 coarse sand : 4 finished of all respect including) rounding off edges etc. but excluding the cost of nosing of steps etc. complete.50mm thick with 20mm thick nominal size aggregate. Including finished with a floating coat of neat cement including cement slurry, making of lines or grooves etc. complete. |
| 31 | Painting with enamel paint of approved brand and manufacture to given an even shade. Two or more coats on new work. |
| 32 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work including preparation of base with primer, putty, lippy complete in all respect. |
| 33 | Applying Birla/JK white cement based putty over cement plastered surface for making even surface |
| 34 | Providing and fixing in position collapsible steel shutters with vertical M.S. Channels 20x10x2mm and brackets with flat iron diagonals 20x5mm, size with top and bottom rail of T-iron 40x40x6mm, with 40 mm dia steel pulleys / ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (To be measured and paid as per outer dimension). With 75 mm opening when closed. |
| 35 | Providing and fixing anodized aluminium work (Anodizing to be got done from approved Anodizer) for doors, windows ventilators and partition with extruded built up standard tubular and other sections of approved make conforming to IS : 733 and IS 1285 anodised transparent and dyed to required shadeaccording to IS : 1868 .(Minimum anodic coating of grade AC 15), fixed with rawl and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gap at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth rust free straight, mitred and jointed mechaincally wherever required including cleat angle Aluminium snap beading for glazing /panelling , C.P. brass/ stainless steel screws, AI. Tower bolt & AI handle & Al. Aldrop etc. all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separtely). For fixed portions |
| 36 | Providing and fixing anodized aluminium work (Anodizing to be got done from approved Anodizer) for doors, windows ventilators and partition with extruded built up standard tubular and other sections of approved make conforming to IS : 733 and IS 1285 anodised transparent and dyed to required shadeaccording to IS : 1868 .(Minimum anodic coating of grade AC 15), fixed with rawl and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gap at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth rust free straight, mitred and jointed mechaincally wherever required including cleat angle Aluminium snap beading for glazing /panelling , C.P. brass/ stainless steel screws, AI. Tower bolt & AI handle & Al. Aldrop etc. all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separtely). For shutters of openable doors, windows & ventilators including providing & fixing hinges / rollers etc. and making provisiion for fixing of fittings wherver required (lockes shallbe paid for separately). |
| 37 | Providing and fixing glazing in aluminium door, window, ventilator shutter and partition etc with PVC/Neoprene gasket etc complete as per the Architectural drawings and the direction of Engineer in charge ( cost of aluminium snap beading shall be paid in basic item) With glass panes of 5.0 mm thickness (weight not less then 13.75 kg/sqm) as per IS:2835 |
| 38 | P & F double action Hydraulic floor spring of approved brand and manufacture to aluminium door shutterincluding cost of cutting floors as required embedding in floors and cover plate etc. complete as per directon of Engineer in charge Confirming to IS 6315 |
| 39 | Providing and fixing brass lock without handle for Aluminium door, of approved quality, make & design as directed by Engineer-in-charge. |
| 40 | Providing and fixing T- iron frames for doors windows and ventilators of mild steel Tee sections, joints mitred and welded with 15x3mm lugs 10cm long embeded in cement concrete block 15x10x10cm of 1:3:6 (1 cement:3 coarse sand : 6 graded stone aggregate 20mm nominal size ) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer |
| 41 | Providing & fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using phenol formal dehyderesin in glue both sides with approved steel fitting complete as per annexure \"A\" 35 mm thick. Commercial veener both side |
| 42 | Providing and fixing 1.5 mm thick Aluminium Sheets on Doors / Windows including cutting and S.S. screws of required size as per direction of Engineer-in-Charge. |
| 43 | Providing fixing square bars or other flat welded to window, vantiletions etc. |
| 44 | Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section joints mitred and welded with steel lugs 13x3mm, 10cm, long embedded in cement concrete block 15x10x10cm of 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with coper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer excluding the cost of metal beading and other fitting except necessary hings of pivots steel handles peg stay etc. as required. PARTLY OPENABLE PARTLY FIXED |
| 45 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20 x 3 mm with suitable screw at not exceeding 150mm distance. |
| 46 | Structural steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete above plinth level upto 4.5 mtr height In flates, tees, angles & Channals |
| 47 | Providing and fixing precoated galvanised iron profile sheets ( size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.5 mm (+.05%). Total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on oth sides of the sheet and polyster top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be suppliedin single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling/ self tapping screws of size (5.50x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to sixe and shape whereever required |
| 48 | Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in lead of 50 mtr. All kinds of soil. |
| 49 | Filling available excavated earth (excluding rock) in trernches, plinth side of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering including lead upto 50 meter and lift upto 1.5meter |
| 50 | Providing and laying in position cement concrete including curing compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level using crusher broken aggregate. M 10 grade Nominal mix (withgraded stone aggregate 40mm nomimal size.) |
| 51 | Centering & shuttering with plywood or steel sheets including strutting , propping bracing both ways and removal of formworks for foundation in basement rafts, straps, beams, bases of columns etc. upto plinth level. |
| 52 | RR Stone masonry for Foundation and plinth in cement sand mortar above 30cm thick wall in : Cement mortar 1:6 (1Cement: 6 sand) |
| 53 | Centering & shuttering with plywood or steel sheets including strutting , propping bracing both ways with wooden members and removal of formworks forupto floor three level for: Columns,pillars posts and struts etc. |
| 54 | Providing and laying in position specified grade of reinforced cement concrete including curing compaction finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement.All work up to plinth level : M20 Grade nominal mix ( with graded stone aggregate 20 mm nominal size) |
| 55 | Providing & laying in position specified grade ofcement concrete for RCC structure elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 ( 1cement: 3sand ) and making good the joints excluding the cost of centering, shuttering and reinforcement for Walls (any thickness) including attaches pilasters buttresses, plinth and string courses fillets column pillars pears abutments posts struts etc. M 20 grade nominal mix (with graded stone aggregate 20 mm nominal size) |
| 56 | RR dry stone kharanja under floor |
| 57 | Brick masonry in superstructure upto third storey Using brick of designetion 75 in cement mortar 1:6 ( 1 cement: 6 coarse sand ) |
| 58 | Half brick masonry in superstructure up to third story using bricks of designation 75 with nominal hoop rainforsed (2 Nos. 6mm MS bar) at every fourth course in for hoop rainforcement 1Sqm. 6mm MS bar 2x2x1.00 = 4.00 Cement mortar 1:4 (1-Cement:4-coarse sand). |
| 59 | Centering & shuttering with plywood or steel sheets including strutting , propping bracing both ways with wooden members and removal of formworks forupto floor three level for suspended floors, rofs, landings staircases, balconies, girders, cantilevers, bands, coping, bed plates, anchor blocks, sills, chhajjas, lintel beam etc. |
| 60 | Providing & laying in position specified grade of cement concrete for RCC structural elements upto three floorlevel including curing, compaction, finishing with rendering in cement sand mortar 1:3 ( 1cement: 3 coarse sand ) and making good the joints excluding the cost of centering, shuttering and reinforcement for beams, suspende floors, roofs, griders, having slope upto 15, landings, balconies, shelves, chajjas, lintel,bands, plain window sills, staircases and spiral staircases. M20 grade Nominal Mix (with graded stone aggregate20mm nominal size) |
| 61 | Providing & fabricating reinforcement for RCC work including straightening, cutting, bending, placing in position and binding (including cost of binding wire ) all complete upto floor three level. Thermo Mechanically Treated Bars (IS : 1786 ) |
| 62 | Plaster on new surface on walls in cement sand mortar 1:6 including raking of joints etc. complete fine finished 20mm thick. |
| 63 | 6mm Cement plaster to ceiling of mix 1:3 (1 cement : 3 fine sand) |
| 64 | Polished Kota Stone flooring skirting, laid over 20 mm thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete : For area of each slab up to 2001 to 5000Sq. Cm : 20 mm thick slab. |
| 65 | Providing and fixing Granite stone slab thickness 16-18 mm mirror polished and machine cut in walls, pillars, steps, Shelves, Counters, Floors, etc. laid on 12 mm (Av) thick base of cement mortar 1:3 ( 1 cement : 3 coarse sand ) jointing with white cement mortar 1 : 2 ( 1 white cement : 2 marble dust ) with pigment to match the shade of the granite slab complete including rubbing and polishing of : Green / Black / Other granite Above 3601 Cm2 Slabs |
| 66 | Providing & fixing precast cement concrete coping 1:2:4 mix 50mm thick complete as per specification. |
| 67 | Providing brick kharanja in cement sand mortar 1:4 in square pattern over roof of ground floor 75mm to 100mm thick average |
| 68 | Crazy marble stone flooring 20 mm thick marble stone with black or of specified colour topping including filling the gaps with cement marble chips mix in proportion of 4:7 (4-Cement:7-White black or white or black marble chips) size from 1 mm to 4 mm by volume and under layer of 25 mm thick cement concrete [1:2:4, graded stone aggregate 12.5 mm nominal size] rubbing and polishing and cement slurry etc. complete : In ordinary cement |
| 69 | Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finished with cement mortar 1:3 as per standard design. |
| 70 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work including preparation of base with primer, putty, lippy complete in all respect. |
| 71 | Applying Birla/JK white cement based putty over cement plastered surface for making even surface |
| 72 | Providing fixing square bars or other flat welded to window, vantiletions etc. |
| 73 | P & F indian type white glazed vitreous china 1st quality WC orissa pan (IS : 2556 mark) with 100mm vitreous china P or S trap including cutting & making good the wall & floor, size 580x440mm |
| 74 | P & F European type white glazed vitreous china Ist quality W.C. pan (IS : 2556mark) with P or S trap including citting and making good the wall and floor. |
| 75 | P & F Ist quality WVC Urinal (IS:2556 mark) with 25 mm dia G.I. waste pipe, dome couplings, concealed iron brackets or screws etc. complete. Flat Back (large) size 610x400x80 mm. |
| 76 | P & F Low level Flushing Cistern of 10 liters capacity (IS : 2556 mark), of approve make with complete fitting C.I. brackets duly painted, brass ball cock with ball, ( IS : 1703 mark) complete including cutting and making good the wall: WVC for symphonic EWC |
| 77 | P & F WVC wash basin (1st quality IS : 2556 mark) of approved make with CI brackets duly painted 1 No 15mm CP Pillar cock (IS : 8934 mark) & 32mm CP brass waste coupling of approved make, 25mm GI waste pipe complete including cutting & making good the wall,Size 550 mm x 400 mm dia for counter top |
| 78 | P & F Beveled edge Mirror of special glass of approved make (Atul/equivalent)complete with 6 mm thick asbestos cement sheet ground fixed to wooden screw & washers.size 600mmx450mmx4mm thick |
| 79 | P & F grating of approved quality/ make stainless seel sheet size 125mm dia |
| 80 | P & F GI pipes ( internal work ) with GI fittings (IS : 1239 mark) & MS clamps including cutting & making good the walls & floors. Concealed pipe in wall including anticorrosive bitumen paint 15mm dia nominal bore class \"B\" |
| 81 | 20mm dia nominal bore class \"B\" |
| 82 | P & F GI pipes ( external work ) with GI fittings (IS : 1239 mark )including trecing & refiling earth etc. 25mm dia nominal bore class \"B\" |
| 83 | P & F bib cock (IS : 8931 mark) superior quality of approved make CP brass,15 mm nominal bore |
| 84 | P&F Stop Cock (IS:8931 mark), Superior quality of approved make : C.P. BrassConcealed Stop Cock 15 mm. |
| 85 | P & F Ball cock (IS : 1703 mark) with Rod & PVC ball complete brass wt. 400gm ,15 mm nominal bore |
| 86 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc.C.P. Inlet connection with 37 Cm. long thread and nut. |
| 87 | P & F15 mm dia connection pipe of Approved make,PVC pipe with CP Brass nuts upto length 450mm. |
| 88 | P & F full way valve (IS :778 mark ) or wheel valve of approved makeGun- metal 25mm nominal bore |
| 89 | P & F PVC storage tank ( IS :12701 mark includibf the BIS license no.)of approved mark with cover 25 dia 1M long GI over flow pipe & 25cm long wash out pipe with plug & socket including making connection etc. complete of approved design 1000 liters capacity. |
| 90 | P & F rigid PVC pipe IS: 4985 mark class II 4kg/sqcm approved quality/make including joining the pipe with solvent cement rubber ring and lubricant. 110mm dia |
| 91 | P & F rigid PVC pipes fittings(IS : 4985 mark) of approved quality/ make.Including jointing the pipe with solvent cement rubber ring and lubricant 110 mm dia coupler (socket) |
| 92 | Door Tee |
| 93 | Plain Tee |
| 94 | Bend 45 |
| 95 | Bend 87.5 |
| 96 | covel |
| 97 | pipe clip |
| 98 | Plain floor trap |
| 99 | Constuction of septic tank in all types of soil 40cm thick masonary in CM 1:6, 15 cm thick cement concrete 1:5:10 in bed m-15 grade Cc flooring &over stone slab covering, 80mm thick slab joining of slab in CM 1:3 Ralthal, khanja, 50mm thick stone partition walls, 20mm thick inside plaster in CM 1:6 finishing with floating neat cement, 4Nos CI foot rest of approved design, 2 Nos 450mm dia 25 kg each CI cover with frame ,earht work etc. complete as per approved drawing including disposal of surplus earth with in a lead of 50mtr, Size 400x140x150 cms (for 50 users) |
| 100 | Constuction of soakage well in all types of soil with 300mm thick dry masonary, top & bottom 300mm course in CM 1:6, 80 mm thick stone slab, jointing of slab in CM 1:3, Ralthal, Kharanja , 40mm thick M-15 grade CC flooring , earth work etc. complete as per approved drawing including disposal of earth with in a lead of 50m size 300cms dia outside & 300cm depth. |
| 101 | Constuction ofChamber in all types of soil with 300mm thick masonary in CM 1:6, 100 mm thick cement concrete 1:5:10 in foundation, 20mm thick inside plaster in CM 1:6 finishing with floating neat cement, 50mm thick M-15 grade CC flooring , earth work etc. complete as per design including disposal of surplus earth within 50mtr lead.Inside size 300x300 mm depth up to 0.5m cement cover with frame Inside size 300x300mm depth upto 0.5m & 5Kg C.I. cover with frame |
| 102 | Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in lead of 50 mtr. All kinds of soil. |
| 103 | Filling available excavated earth (excluding rock) in trernches, plinth side of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering including lead upto 50 meter and lift upto 1.5meter |
| 104 | Providing and laying in position cement concrete including curing compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level using crusher broken aggregate. M 10 grade Nominal mix (withgraded stone aggregate 40mm nomimal size.) |
| 105 | RR Stone masonry for Foundation and plinth in cement sand mortar above 30cm thick wall in : Cement mortar 1:6 (1Cement: 6 sand) |
| 106 | Random Rubble stone masonry for superstructure above plinth level one storey height above 30 cm. thick walls in :Cement mortar 1:6 ( 1 Cement : 6 Sand ) |
| 107 | Random Rubble stone masonry for superstructure above plinth level one storey height above 30 cm. thick walls in :mortar 1:6 ( 1 Cement : 6 Sand ) Add Extra For Pillar masonry including bed platesas per specifications ( Bed plates to be paidseperately) Up to 45 cm length and two corners are free |
| 108 | Providing and fixing precast cement concrete coping 1:2:4 mix 50 mm thick complete as per specification: |
| 109 | RR dry stone kharanja under floor |
| 110 | Providing and fixing of precast concrete interlocking block of M 30 grade manufactured from fully computerised automatic stationery hydraulic vibropressed machine and fully computerised automatic batching plant of class A1/A2 as per BS 6717:2001 with rubber mould technology including painting with lacker polising. The CC interlocking paving blocks be laid on average 50 mm. thick bed of coarse sand and the joint on is to be filled with fine sand. Laying procedure on compacted sub-base as defined. Complete job is to be executed as per the instruction of Engineer incharge. The rates to be inclusive of all lead, Lifts and taxes General specification of blocks: 1) Shape as defined by Engineer incharge 2) Tensile splitting strength and braking load as per BS 6717:2001 3) Color : Grey cement natural colour. 4) Variation in dimension : Less than 1.6 mm. 5) Variation in thickness : Less than 3.2 mm. 6) Abrasion : As per BS : 6717:2001 60mm thick interlocking blocks |
| 111 | Plaster on new surface on wall in cement sand mortar 1:6 including raking of joints etc. complete fine finish: 20mm thick |
| 112 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding New work (two or more coats) over and including scrapping and priming coat with cement primer |
| 113 | Painting with enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 114 | Providing and fixing steel gate grating and grills made of angles, tees, square bars orflats black pipe with holdfast and fittings complete as per deign and drawing including cutting welding and fabrication with priming coat of red oxide. |
| 115 | Providing and fixing cow catcher made of R.S. joist angles channels MS round including cutting welding and fabrication with priming coat of red oxide ( as per design). |
| 116 | Carriage of.Earth, Sand,Moorum, including loading unloading and stacking if required complete in all respect. For 1 Km. |
| 117 | Cast in Situ Cement Concrete M20 kerb (Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408) Using Concrete Mixer |
| 118 | 120CM high fencing with angle iron posts 50x50x6mm placed at every 3 Mtr. apart 30 cm in ground embedded in cement concrete, 1:3:6 (30x30x45cm) corner and every tenth post to be strutted with 50x50x6mm angle iron provided with three horizontal lines and two diagonal of black barbed wire between two posts fitted and fixed with G.I. staples including earth work in excavation etc. complete. |
| 119 | S & Laying following size\" A\" class G.I. Pipe with accessories for laying earth conductor/strip in ground/surface/recess as required 40 mm dia. |
| 120 | P & F of aviation obstruction light luminaire comprising of yellow painted die cast aluminium alloy housing, built in 75 VA step up transformer, heat resistant clear glass cover, neon spiral lamp complete in all respect |
| 121 | Maintenance free gel earthing with pipe in pipe /Strip in Pipe technology filled with anti corrosive conductive compound (CPRI tested) below the ground in 150 -200 mm dia earth pit and surrounding filled with required mineral filling compound (MFC should have hygroscopic proper ty to retain the moisture for long time to create low resistance Zone) and C.C. finished chamber covered with hinge type with locking arrangement C.I cover. C.I. frame of size 300mm x300mm complete testing of earth resistance as required of following sizes With pipe in pipe technology (inner pipe dia / outer pipe dia) 80 -100 micron G.I. coating G.I. pipe 2000 mm long , 50/25 mm , terminal 12 mm G.I. strip |
| 122 | Supplying and making one end termination with heavy duty single compression brass gland SIBG type, heavy duty aluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. 4 x 25.0 sq.mm |
| 123 | Supplying and making one end termination with heavy duty single compression brass gland SIBG type, heavy duty aluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. 3.5 x 95.0 sq.mm |
| 124 | Providing & Laying XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Unarmoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size. 4 corex 25.0 sq.mm |
| 125 | Providing & Laying XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Unarmoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size. 3.5 corex 95.0 sq.mm |
| 126 | Providing and laying XLPE/PVC insulated & PVC sheathed Un-armoured control cables of 1.1 KV grade with copper conductor as per IS 1255 including excavation of 30 CmX75 Cm size trench 25 Cm thick under layer of sand and second Class bricks covering 3C x 2.5 sq.mm |
| 127 | S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. (Group -1)20mm x 3mm G.I. Strip |
| 128 | P&F 240/415 V MCB of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required. (Group -1) Four pole MCB 40 A 63 A rating |
| 129 | P&F 240/415 V MCB of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required.(Group -1), Single pole MCB, 6 A to32 A rating |
| 130 | SITC of quick make and quick break 3 POLE current limiting MCCB having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings and conforming to IS 13947-2 / IEC 60947-2 with front face and centralised adjustable, line load interchangeability, having positive isolation capability, provision for UVR , shunt trip , earth fault trip, push ( test ) to trip, including making connections with lugs / spreaders etc. as requiredWith Thermal Magnetic release up to 100 Amp , 10 kA, fixed O/L & S/C setting |
| 131 | SITC of quick make and quick break 3 POLE current limiting MCCB having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings and conforming to IS 13947-2 / IEC 60947-2 with front face and centralised adjustable, line load interchangeability, having positive isolation capability, provision for UVR , shunt trip , earth fault trip, push ( test ) to trip, including making connections with lugs / spreaders etc. as requiredWith Thermal Magnetic release up to 200 Amp , 25 kA, adjustable O/L & S/C setting |
| 132 | SITC of walll/free standing floor mounted dust and vermin proof compartmentalised cubical panel made out of CRCA sheet, required hardware, duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/Neoprene rubber gasket of not less than 3mm thickness, separate detachable, gland plate M.S. base channel, hinged door with locking arrangement for equipment/switchgear. Thickness of sheet shall not be less than 1.6mm up to 600mm length/width of any compartment and be of 2.0mm above 600mm. Load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be fabricated from CPRI approved fabricator). |
| 133 | P&F Recessed/ Surface mounting heavy duty Vertical type sheet steel Distribution board with provision of incomer,phophatised/ powder painted complete with 100 amp insulatedcopper bus bar, shorting link , neutral link, earth link and din bar masking sheet conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required Double door (Three phase) 12 WAY |
| 134 | The scope of this workcovers the design, manufacture, transport, installation,civil foundationtesting and commissioning of the complete stadium sport highmask with flood lightsystem,using as per given plan of stadiumfor cricket require dsuitablelux level andtype ofmast towers, The design calculation & structura ldrawing shall also be supplied by the bidder. . The expenditure on the design shall be borne by the bidder. (A) Supply , Erection,commissionning,civil foundation of 30Mt heightsport stadiumhigh mast as per attached technical data sheet in tender,suitable for wind velocity 50m/s as per IS 875, and erection of the mast with the help of suitable equipment\"s and assembly of operating system.mask approved make:SURYA/TRANSRAIL/ASTER equlaint make. |
| 135 | (B) P & F of IP66 protected high power LED flood light system with pressure die cast Aluminum housing , toughened glass diffuser with suitable lens cluster for optimum light distribution to achieve beam angle of 30 degree , 240 volts AC , 50 Hz , of high power LED fixture supplied with prewired cable . intregrated driver shall be of high efficiency more than 85% . The system levelluminarie efficacy >/= 120 lumen / watt with high power LED of CREE / NICHIA / OSRAM / PHILIPS / SEOUL make is to be used. Input Voltage 130V- 270 V AC , Power Factor >0.95 , Frequency 50 Hz (+/- 3%) , THD < 10% , Colour Temperature 5700 K , CRI > 70 , Ingress Protection IP66 , Impact Resistance IK 05 , Surge Protection Minimum 5 KV internal and 10 KV externalin 80 watt onward.Lifeexpectancy equal to or more than 50000 burning hours with minimum 70% lumen maintenance. Mark / Brandto be engraved / embossed on die cast housing. The manufacture should have NABL accredited lab with photo metric testing facility. Approved makes : Philips/, Bajaj, CG, Wipro, GE, Havels, HPL, Surya, Scheider, Keselec, equlaint make Lighting scienc/transrail HIGH POWER LED FLOOD LIGHT 500 W - |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
