Wapcos Limited has published Repair Of Hutment With Toilets For Security Guards At Falta Special Economic Zone ( Fsez ) , Falta, West Bengal Repair Of Hutment With Toilets For Security Guards At Falta Special Economic Zone ( Fsez ) , Falta, West Bengal. Submission Date for this Tender is 23-08-2021. Toilet Bathroom Tenders in Falta SEZ, Falta, West Bengal West Bengal. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Cleaning of jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above the ground level and removal of rubbish to designated place as per EIC outside the peripheri of the area cleared. |
| 2 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material with all leads & lifts: Asbestos cement sheet |
| 3 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m² |
| 4 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete 0.63 mm thick with zinc coating not less than 275 gm/m² |
| 5 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 6 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material with all leads & lifts as per direction of Engineer-in-charge. |
| 7 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand) |
| 8 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 9 | White washing with lime to give an even shade : New work (three or more coats) |
| 10 | Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade. |
| 11 | Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works |
| 12 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture |
| 13 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding |
| 14 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes |
| 15 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking with all leads & lifts. |
| 16 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 17 | Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm),with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineerin-charge Extruded section profile size 48x40 mm |
| 18 | 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of "H" section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. "U" cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer"s specification and direction of Engineer-in-charge. |
| 19 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 20 | Providing and fixing PTMT Tower Bolts with 12 mm one piece rod inside and necessary screws etc., complete. 152x42x18 mm weighing not less than 60 gms |
| 21 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete. |
| 22 | Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. barbent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete. |
| 23 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate |
| 24 | DismantlingW.C.Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-inCharge. |
| 25 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with“S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.Long pattern W.C Pan of size 580x440 mm. |
| 26 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 27 | Providing and fixing brass bib cock of approved quality : 20 mm nominal bore |
| 28 | Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 |
| 29 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete |
| 30 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 31 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe. 32 mm dia |
| 32 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. |
| 33 | Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. (a) 200mm long |
| 34 | Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m. |
| 35 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) |
| 36 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. A) UPVC Pipes:110 mm. Dia. |
| 37 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. B) UPVC Fittings: Plain Tee,110 mm. Dia. |
| 38 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. C) Plain Y,110 mm. Dia. |
| 39 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, D) Bend 87.5 degree, 110 mm. Dia. |
| 40 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length |
| 41 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 20 mm nominal outer dia Pipes |
| 42 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm nominal outer dia Pipes |
| 43 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 32 mm nominal outer dia Pipes |
| 44 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter |
| 45 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore. |
| 46 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm |
| 47 | Cons. of septic tank of different capacities as per appd. dwg with 1st class brick work in cement mortar (1:4) incl. two 560 mm dia. R.C.C. manhole cover (heavy type) of appv. make supplied, fitted and fixed in the100mm thick R.C.C (1:1.5:3) top slab with necy. fittings, 20mm thick cement plaster (4:1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4:1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C (1:1.5:3) bottom slab incl. supplying, fitting and fixing all necy specials, fittings, S.W. tees, C.I. foot rest etc. incl. excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necy, amming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and incl. constructing attached inspec pit as per appd. dwg and connecting all necy pipes, joints etc. with intl plaster work and artificial stone flooring is to be done with admixture of water proofing comp @ 0.5% by wt of cement with all costs of labour & materials. Finished level of Septic Tank should be 400 mm. from GL (ii) Height of 50 mm. Vent pipe & Mosquito proof mesh, should be as per IS:2470, PartI (30 users) Pakur variety. SAIL/TATA /RINL |
| 48 | Providing and fixing 32A capacity TP&N disconnector switch fuseunit in sheet steel enclosure with ISI marked HRC fuses on angle iron frame on wall surface including drilling holes, making connections, etc. as required to complete the job. (Make:- L&T/Legrand/Schneider or any other approved make as directed by EIC). |
| 49 | Supply and delivery at site of 2 Core 10 Sq mm PVC/XLPE insulated armoured Al conductor cable A2XWY/A2XFY of 1100V grade and conforming to IS:7098 (Part-I) 1988. (Make:- Polycab/Finolex/ or any other approved make as directed by EIC). |
| 50 | Laying of one number PVC insulated and PVC/XLPE power cable of 1.1 KV grade of 2 Core 10 sq mm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. |
| 51 | Laying of one number PVC insulated and PVC XLPE power cable of 1.1 KV grade of 2 Core 10 Sq mm size in the existing Metal pipe (25mm) as required to complete the work. |
| 52 | Supplying and fixing of 25mm of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. |
| 53 | Supplying and making end termination with brass compression gland and tightly fixing with aluminium lugs for 2 Core 10 Sq mmof PVC insulated and PVC/XLPE aluminium conductor cable of 1.1 KV grade as required to complete the work. |
| 54 | Supplying and fixing 8 way, double door, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper busbar, neutral bus bar, earth bar, din bar, inter connections, powder painted including earthling etc. as required to complete the work. |
| 55 | Supplying and fixing 16 way, double door, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper busbar, neutral bus bar, earth bar, din bar, inter connections, powder painted including earthling etc. as required to complete the work. |
| 56 | Supplying and fixing 5 A to 32 A rating Single Pole, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required to complete the work. |
| 57 | Supplying and fixing 5 A to 32 A rating Double Pole, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required to complete the work. |
| 58 | Wiring in 1.1 KV grade single core stranded "FR" PVC insulated & unsheathed copper wire (Brand approved by EIC) of2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wirein 25mm PVC casing-capping (Precision make or as specified by EIC) incl. necy. PVC clips, fittings etc.as required to complete the work. |
| 59 | Wiring in 1.1 KV grade single core stranded "FR" PVC insulated & unsheathed copper wire (Brand approved by EIC) of 2 X 2.5 sq. mm + 1 X 1.5 sq. mm earth wire in 25mm PVC casing-capping (Precision make or as specified by EIC) incl. necy. PVC clips, fittings etc.as required to complete the work. |
| 60 | Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded "FR" PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded "FR" PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to light/fan point with piano key type switch ((Brand approved by EIC)) fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necy. connections and making earthing attachment and mending good damages to building works. [PVC casing-capping and Switch board both on surface] Average run 5 mtr |
| 61 | Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded "FR" PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded "FR" PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to light/fan point with piano key type switch ((Brand approved by EIC)) fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necy. connections and making earthing attachment and mending good damages to building works. [PVC casing-capping and Switch board both on surface] Average run 6 mtr |
| 62 | Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded "FR" PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded "FR" PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to light/fan point with piano key type switch ((Brand approved by EIC)) fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necy. connections and making earthing attachment and mending good damages to building works. [PVC casing-capping and Switch board both on surface] Average run 10 mtr |
| 63 | Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6A socket outlet and 5/6A piano type switch, connections, painting etc. as required with approved make items. |
| 64 | Installation, testing and commissioning of LED tube fitting of all types, complete with all accessories and lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable (Phase and return both) and earthling etc. as required to complete the work with approved make items. |
| 65 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required to complete the work with approved make items. |
| 66 | Installation of exhaust fan in the existing opening with proper safety nut, including making good the damage, connection, testing, commissioning etc. as required to complete the work. 300 mm sweep |
| 67 | Supply & fixing Al. louver shutter on wall necy. Bolts & nuts |
| 68 | Supplying and fixing PVC angle holder including connections etc. as required to complete the work. |
| 69 | Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required to complete the work. |
| 70 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. |
| 71 | Supply & delivery of Decorative slim linear LED batten with inbuilt LED tube, surge protection & insulation, Environment friendly, Energy efficient, Elegant design, No UV & IR radiations, Cool day light, 6500K, 36 W LED tube light fitting complete with all accessories, lamp, driver etc. Technical Specification :- Rated Input Vol. - (140-270) V Wattage - 36 W Lumens Efficiency - 100 lumens/Watt CRI - > 80 Driver Efficiency - 90 % Length - 1200 mm (Make: Philips/Havells or any other approved make as directed by EIC) |
| 72 | Supply, delivery & fixing of LED 9W 3 STAR Cool Day light suitable for 230V supply LED lamp with all accessories etc. (Make: Philips/Havells or any other approved make as directed by EIC) |
| 73 | Supplying & Fixing Out door type CFL luminaire with epoxy powder coated sheet aluminium housing, aluminium reflector & clear acrylic cover and accessories incl. 18 watt lamp incl. S&F 15 mm dia GI pipe bracket, clamp, nut & bolts etc. to complete the work. (Make: Bajaj or any other approved make as directed by EIC) |
| 74 | Supply & delivery of 220-240V, 1200 mm sweep, Star rated with BEE & ISI marked, High speed, Metal blade with solid colour finish, Energy efficient, Stylish Aesthetics with metallic body ring and trims Ceiling Fan (Approved make) fitting complete with all accessories like fan motor, Blades, Down rod, Canopy Set, Shackle Kit, twisted wire etc. Technical Specification :- No. of Blades - 3 nos. Body/Blade Colour. - Decided later by EIC/Client Air delivery - > 215 m³/min Rated Speed- 400 rpm Noise Level - (45-50) dB Power Consumption - 75 W (Make: Crompton/Orient/Havells/or any other approved make as directed by EIC.) |
| 75 | Supply & delivery of 230V, 300 mm sweep, Pista Green,metal blade with steel guard cover, powder coated metallic finish, high speed motor Exhaust Fan fitting complete with all accessories like mounting kit etc. Technical Specification :- No. of Blades - 3 nos. Body Colour. - Grey Blade Design - Aerodynamically designed & balanced blade Air delivery - > 900 m³/h Rated Speed- > 1400 rpm Noise Level - (45-50) dB Power Consumption - 50 W (Make: Crompton/Havells/or any other approved make as directed by EIC.) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
