|
| 1 | Excavation in foundation in ordinary soil (Loam Clay or Sand) including lift upto 1.5m and lead upto 30m and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of the foundation work. (CSI No. 4.01) |
| 2 | Local sand filling in plinth including supply of necessary quantity oflocal sand from outside the UPPCL premises including watering, dressing etc. Rate to include cost of all materials, labour and T&P etc. required for proper completion of work. (CSI No. 4.05) |
| 3 | Clearing jungle including uprooting of rank vegetations,grass, bush,wood, trees and saplings of girth upto 30cm measured at a height of 1.0m above ground level and removal of rubbish upto a distance of 50m outside the periphery of UPPCL area cleared. (CSI No. 4.08) |
| 4 | Earth filling under floors and/or sub station area including cost of earth when obtained from outside UPPCL area including its roylty and carriage including watering, ramming in 20 cm layers and dressing of earth etc. all complete. (CSI No. 4.10) |
| 5 | Levelling and dressing and making proper slopes including cuttingand filling of earth upto a depth 100mm if so required includingall labour T&P etc. required for proper completion of the work . (CSI No. 4.11) |
| 6 | Concrete with 4cm gauge I class brickballast (class 150) , coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 12:6:1 in foundations and under floors including supply of all materials, labour and tools and plants etc. required for proper completion. (CSI No.5.01 ) |
| 7 | Concreting of 40 mm thick RCC trench covers in mild steel framework with RCC 1:1.5:3 in Cement,Chopan coarse sand(F.M. 1.8 to 2.5) and 2cm gaugegraded hard stone ballast with 3mm thick floating coat of neatcement finish on top of cover complete with all labour, materials and placing the same in proper position at required location of cable trench within the substation area. (CSI No. 5.18) |
| 8 | Cement concrete with 2cm gauge approved hard stone ballast,coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 1:1.5:3.including supply of all materials, labour,side shuttering ifrequired and T&P etc. required for proper completion of work(CSI No. 5.21) |
| 9 | RCC work with cement approved coarse sand(F.M. 1.8 to 2.5) and2 cm gauge graded approved hard stone ballast like grainite, quartzite etc from Dalla, Jhansi or other quarries and approved coarse sand in proportion 1:1.5:3in lintels of doors and windows, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P. . (CSI No. 5.23) |
| 10 | RCC work with cement approved coarse sand(F.M. 1.8 to 2.5) and2 cm gauge graded approved hard stone ballast like grainite, quartzite etc from Dalla, Jhansi or other quarries and approved coarse sand in proportion 1:1.5:3inslab, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P. (CSI No. 5.24) |
| 11 | RCC work with cement approved coarse sand (F.M. 1.8 to 2.5) and2 cm gauge graded approved hard stone ballast like grainite, quartzite etc from Dalla, Jhansi or other quarries and approved coarse sandin proportion 1:1.5:3inlighter beams i.e. having span upto6m , excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P . (CSI No. 5.25) |
| 12 | RCC work with cement approved coarse sand(F.M. 1.8 to 2.5) and2 cm gauge graded approved hard stone ballast like grainite, quartzite etc from Dalla, Jhansi or other quarries and approved coarse sand in proportion1:1.5:3 in raft foundation and footings , excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P. (CSI No. 5.27) |
| 13 | RCC work with cement approved coarse sand (F.M. 1.8 to 2.5) and2 cm gauge graded approved hard stone ballast like grainite, quartzite etc from Dalla, Jhansi or other quarries and approved coarse sandin proportion 1:1.5:3in RCC T beam-slab and column , excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P . (CSI No. 5.29) |
| 14 | First class brick (class-150) work in 1:6 cement and coarse sand(F.M.1.8 to 2.5) mortar in foundation and plinth including supply of allmaterials, labour & T&P etc. required for proper completion of work. (CSI No. 6.01) |
| 15 | As in item 14 above but in super structure including necessary cutting and moulding of bricks wall one brick thicnkness(CSI No. 6.01 +6.07 + 6.08) |
| 16 | First class brick (class-150) work in 1:4 cement and coarse sand(F.M. 1.8 to 2.5) mortar in foundation and plinth including supply of allmaterials, labour & T&P etc. required for proper completion of work. (CSI No. 6.03) |
| 17 | First class brick (class-150) work in 1:4 cement and coarse sand (F.M. 1.8 to 2.5)mortar in superstructure including necessary cutting & moulding of bricks as required for one brick thick wall including supply of allmaterials, labour & T&P etc. required for proper completion of work.(CSI 6.03+6.07+6.08) |
| 18 | Brick work in foundation & plinth with old dismantledbricks (supplied by department free of cost) and coarse sand of F.M. 1.5 to 2.0mortar in 1:6 including supply of all other materials, labour, removing mortar & cleaning of old & used bricks,T&P etc complete.(CSI No. 6.18) |
| 19 | Same as in item 18 above butin super structure for 230 mm thick valve. (CSI No. 6.19) |
| 20 | Removal of cement mortar from dismenttled bricks and stacking in countable position at place as directed by the Engineer in charge, including cost of all labour and T&P required for proper completion of work. (CSI No. 6.22) |
| 21 | 2 cm. thick damp proof course with 1:2 cement and approved coarsesand (F.M.1.8 to 2.5) mortar with liquid water proofing material as ordered by the Engineer-In-charge in the proportion as specified by the manufacturer, including supply of all materials, labour and T&P etc. (CSI No. 7.01) |
| 22 | Supply and fixing of 32 mm thick Shisham wood32 mm. thickShishum wood fully glazed. door and window shutter including supply and fixing of wooden cleats,stoppers,hinges and including supply fixing of aluminium towerbolts, locks, handles, springs,Ldrops and other fittings supply & fixing the glass panes with putty and necessary Screws (Glass panes to be 4 mm thick).including Supply and fixing Anodized Aluminium Window fittings like 2 no 100 mm handles,2 no 150 mm tower bolt 1 no stopperincluding all materials,labour & T&P etc. required for proper completion of work. (CSI 8.27+8.62) |
| 23 | S/F Galvanized Mosquitos proof heavy quality iron wire gauge (14x24) over window frames and including supply of Shishum wood battens 8cm x 1cm. and including supply and fixing of necessary screws, all materials,labour andT&P etc. required for proper complete. (CSI No. 8.44) |
| 24 | Supply and fixing of 32 mm thick single leaf flush door shutter ( boiled water resistance, phenol maldehide resin bonded, hot pressed factory made) commercial quality to I.S.2202 part-1 (1983) ISI marked including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges,bolts, locks, handles, springs and other fittings includingSupply and fixing Anodized Aluminium Door fittings like 2 no 150 mm handles,2 no 250 mm tower bolt, 1 no stopper and 1 no 12 mm belan including all materials,labour & T&P etc. required for proper completion of work.(CSI 8.57+8.61) |
| 25 | Supply and fixing brass polished hydraulic door closure of approved make & quality its fixing and adjustment with the help of screws, nuts and bolts including supply of all labour, T & P etc. required for proper completion of the work. (CSI No. 8.60) |
| 26 | Supplying & fixing 24 gauge annodized aluminium sheet of approved quality including cutting, wastage and fixing the same over the wooden door shutters with nails with all material, labour and T&P. (CSI No. 8.63) |
| 27 | Mild Steel or Iron work in heavy sizes such as trusses built upgates, door frames, record, racks roof work gates etc. wrought torequired form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials supplied by contractor. (CSI No. 9.01) |
| 28 | TMT/Tor steel in plain work such as reinforced concrete orreinforced brick work (when not included in an over all rates)wrought to required shape as necessary including bending forproper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured. (Steel shall be arranged by the contractor)(CSI No. 9.03) |
| 29 | Providing barbed iron wire fencing including fixing in postafter straightening it including labour and T&P etc. requiredfor proper completion of the work but excluding supply of postsand wire.(labour rates only) . (CSI No. 9.06) |
| 30 | Dismantling existing barbed wire fencing including making bundlesand stacking etc.complete.(labour rates only) . (CSI No. 9.06a) |
| 31 | Providing and Fixing barbed iron wire fencing including stretching, fixing into the post including all labour, materials and T&P required for proper completion of work. the weight of hot dipped GI barbed wire having 12 SWG - 2 ply wires and 4 point ordinary barbs @ 150 mm (approx) C/C should be 100 gm per Meter. (CSI No. 9.07) |
| 32 | Supply and fixing galvanised mosquito proof jali (16x24 gauge) withM.S. flat of 20 x 3 mm. size, on both sides screwed or welded to windowor door frame. (CSI No. 9.18) |
| 33 | Fixing of Pale fencing alongwith horizontal runner and pales with6 mm dia. 30 mm long galvanized iron bolts and nuts with washerin true alignment and level between the vertical post alreadygrouted as per direction of I/C.(CSI No. 9.19) |
| 34 | Providing M.S. Frames work, rack etc for R.C.C. Trench covers and edging with M.S. angles and M.S reinforcement including cutting, bending and welding as per approved drawing. Therate is including cost of all labour, materials etc. as required for proper completion of the work.(CSI No. 9.20) |
| 35 | Providing & fixing 1 mm.thick M.S. sheet garrage door with frameof 40x40x6mm angle iron,diagonal bracings with 50x5 mm flat and 5 mm thick M.S. gusset plates at thejunctions and corners including supply and fixing of necessaryfitting, 2 no lock rail of 16 dia,375 mm long and including pintel hooks at the top and bottom, applying a priming coat of red oxide paint on all sides complete . (CSI No. 9.34) |
| 36 | Supply and fixing 6 mm thick grey corrugated asbestos sheet roofing .fixed in position with J or U bolts 10 mm. dia with G.I. Limpet & bitumen washers including supply of all materials, labour,wastage. and T&P etc. required for proper completion of the work.(CSI No. 10.03) |
| 37 | S/Fridges, valley and gutters of asbestos sheets roofing fixed with J or U bolts 10mm. dia with G.I. Limpet & bitumen washers complete including supply of all Materials, labour and T&P etc.required for proper completion of the work including wastage. (CSI 10.04). |
| 38 | 12 mm thick plaster with cement mortar consisting of one part of cement & six part of coarse sand(1:6),minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work. (CSI No. 11.09) |
| 39 | As in item no. 38 but in patches (CSI 11.09 + 20.02) |
| 40 | S/mixing approved water proofing compound (CICO,DR FIXIT etc) in cement mortar in plaster or concrete work in the proportion as recommended by the manufacturer. (CSI No. 11.15) |
| 41 | 2.5 cm thick 1:2:4 plain cement concrete floor with cement approved coarse sand and 2 cm graded approved stone ballast laid in panels finished with 3 mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified over and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials labour and tools and plant etc required for proper completion of the work (without base concrete) (CSI 12.02) |
| 42 | As in item no. 41 but in patches (CSI 12.02+20.03) |
| 43 | First class bricks on edge floor laid dry, joints sand filled,including preparation of base to proper slope and its rammingincluding supply of all material labour & T&P etc. required forproper completion of the work. (CSI No. 12.07) |
| 44 | Supply and Laying 8 mm thickglazed floor tiles of Somany, Johnson or equivalent make, of size 300x300 mm, laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete, including supplyof all materials, labour and T&P etc. completion required for proper completion of the work.(CSI No. 12.11) |
| 45 | Supply and Laying 6 mm thickglazed tiles of size 200x300 mm in skirting / dado laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete,including supplyof all materials, labour and T&P etc. completion required for proper completion of the work. (CSI No. 12.12) |
| 46 | Providing and fixing glass strips of 3.15 mm thickness & 25mm depth in jointsof floor and skirting at the time of laying floors, flush withfloor level including supply of all materials, labour& T&P etc. completion required for proper completion of work. (CSI No. 12.13) |
| 47 | Painting or varnishing new iron work in small areas or new woodwork with one coat of ready mixed priming paint and one coat ofapproved superior quality ready mix paint \"Luxol\" or equivalentbrand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950. (CSI No. 13.01) |
| 48 | As in item 47 above but for every coat after first coat. (CSI No. 13.02) |
| 49 | As in item 47 above but for every coat on previously paintedold wood or iron work including its sand papering,rubbing andcleaning as required, for proper completion of work. (CSI No. 13.03) |
| 50 | One priming coat and one coat oil bound distemper on new work includingsupply of all materials,labour and T&P etc. required for propercompletion of the work.(CSI No. 13.08) |
| 51 | As in item 50 but for every coat after the first coat. (CSI No. 13.09) |
| 52 | As in item 50 but for every coat on previously old oil bound distemper surface. (CSI No. 13.10) |
| 53 | Finishing walls with water proof cement paint of approved madelike \"Super Snowcem\" or equivalent quality on new work withtwo coats to give an even shade including supply of allmaterials, labour etc. required for proper completion of work. (CSI No. 13.17) |
| 54 | Same as in item 53 but for each coat of water proof cement paint after the first two coats to give an even shade. (CSI No. 13.18) |
| 55 | Same as in item 53 but for each coat of water proof cement paint. on previously treated surface.(CSI No. 13.19) |
| 56 | Applying Birla or equivalent putty on new interior or exterior surface over one coat of water based cement primer of ICI or equivalent brand for smoothening and levelling of the surface as per requirement and direction of Engineer I/C including cost of all material, labour, T & P etc required for proper completion of work. (CSI No. 13.20) |
| 57 | Painting one coat with APEX or equivalent brand weather coat paint on new wall surfaces (well prepared with Birla putty and one coat of primer ICI or equivalent which shall be paid separately) including thorough washing with water including cost of all materials, labour, T&P required for proper completion of work. (CSI No. 13.22) |
| 58 | Same as in item no 57 above but for every coat of additional APEX or equivalent brand weather coat paint . (CSI No. 13.23) |
| 59 | Painting one coat with Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint (Paint and water in the ratio 1:1 by volume) over prepared and primed surface of cement concrete, cement plaster and bricks including all labour, material and T&P etc required for proper completion of the work, (preparation of base with Birla putty etc. and a coating of primer shall be paid extra) . (CSI No. 13.25) |
| 60 | Same as item No.59 but for each additional coat of paintto give an even shade. (CSI 13.26). |
| 61 | White washing two coat including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 14.02) |
| 62 | Cementwashing one coat including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 14.07) |
| 63 | As in item 62 above but for each coat of Cementwashing after the first coat. (CSI No. 14.08) |
| 64 | Dismantling brick work or stone work in lime or cement mortar andincluding stacking of materials as directed by theEngineer-in-charge within a distance of 60 metres. (CSI No. 15.01) |
| 65 | Dismantling reinforced cement concrete or reinforced brick work,including stacking of dismantled materials as directed by theEngineer-Incharge within a distance of 60 metres. (CSI No. 15.03) |
| 66 | Dismantling cement concrete or brick or granolithic floorsincluding base concrete and including stacking of dismantledmaterials as directed by the Engineer In-charge within a distanceof 60 metres. (CSI No. 15.05) |
| 67 | Dismantling corrugated iron & asbastas roof sheet andstacking of materials as directed by Engg-in-charge within a distance of 60 mtrs. (CSI No. 15.07) |
| 68 | Dismantling of griders, trusses and other steel works including stcking of materials as directed by Engg-in-charge within a distance of 60 mtrs. (CSI No. 15.08) |
| 69 | Dismantaling doors and windowschowkhatsincluding stacking of materials as directed by Engg-in-Charge within a distance of 60 meters. (CSI No. 15.10) |
| 70 | Dismantling existing plaster including disposal of refuse asdirected by the Engineer-I/C within a distance of 60 M. (CSI No. 15.11) |
| 71 | Scrapping old white or colour wash or distemper including disposal of refuseas directed by the Engineer-I/C within a distance of 60 M. (CSI No. 15.12) |
| 72 | Renewing panes of 4 mm thick glass including supply of glass with putty and brads including supply of all materials, labour and t&P etc. required for proper completion of the work.(CSI 20.04b) |
| 73 | Cleaning panes of glass with spirit of caustic soda including supply of all materials,labour and T&P etc.required for proper completion of the work. (CSI No. 20.09) |
| 74 | Cleaning of septic tank including disposal of waste out side the UPPCL area as per direction of the Engineer-in-charge including cost of all labour,T&P etc.required for proper completion of the work.(CSI No. 20.12) |
| 75 | Same as in item No.74 above but for inspection chamber..(CSI No. 20.13) |
| 76 | Cleaning of main drain or width more than 300 mm.including disposal of waste refuses sludge out side the board\"s area including washing and cleaning by clean water completely as per direction of the Engineer-in-charge including cost of all labour,T&P etc.required for proper completion of the work.(CSI No. 20.14) |
| 77 | Same as above in item No. 76 but for drain of width less than 300 mm. (CSI No. 20.15) |
| 78 | Disposal of rubbish / debris out side the UPPCL area as per direction of Er/in- charge including cartage, labour and materials, T&P etc. required for proper completion of the work. (No. deduction for voids shall be made). (CSI No. 20.16) |
| 79 | Supply and replacing of following Oxidised Iron fittings including cost of nuts, bolts etc. complete.(CSI 20.17) |
| 80 | L drops 16 mm dia x 300 long..(CSI 20.17a) |
| 81 | Tower bolts 10 mm dia x 250 mm long..(CSI 20.17b) |
| 82 | Tower bolts 10 mm dia x 100 mm long..(CSI 20.17c) |
| 83 | Iron hinges 100 mm size.12 gauge.thick.(CSI 20.17d) |
| 84 | 3 mm thick floating coat of neat cement finish including supply of all materials,labour and T&P etc. required for proper completion of the work.( cement consumtion 0.044 bag/Sq.m.) (CSI No. 11.20) |
| 85 | Placing of trench cover of all size in proper position including transportation from different places within the S/S area including all labour, T&P etc. required for proper completion of the work as per direction of Engineer - in - charge. (CSI No. 20.11) |
| 86 | Cleaning and opening of chocked W.C./ bath / kithchen pipe line including opening and refixing of chamber cover including washing etc. complete.(Analysis based on NBO - 11 25.020.(CSI No. 20.19) |
| 87 | Opening, cleaning, overhauling, oiling and greasing of defective rolling shutter and also re setting of its springs for its smooth functioning including cost of all materials, labour and T&P etc.( Approx. size of shutter 2x2.5) (CSI No. 20.20) |
| 88 | Cleaning of existing pipe line of different dia. ranging from 4\" to 2\" dia. including digging trenches and refilling, opening of pipes, cleaning of pipes, cutting, threading, if required fixing and including making good the road, wall etc as directed by the engineer I/C.(CSI No. 20.26a) |
| 89 | Cleaning of existing water pipe line of different dia up to 2\" dia including digging trenches and refilling,opening and cleaning of pipes,cutting,threading,if required fixing and including making good the road and wall etc. as directed by the Engineer in charge.(CSI No. 20.26b) |
| 90 | Cleaning of R.C.C. over head tank up to capacity of one lac. Liters and chlorinating with bleaching power mixed to water as per direction of Engineer - in - charge complete.(CSI No. 20.27) |
| 91 | Attending to petty maintenance service like plumbingservice,welder service, mansion service and carpenter servicerequired as below.(CSI No. 22.18) |
| 92 | Job attending by one no. Plumber/welder/mason/carpenter with oneno. helper per hour or part of an hour. |
| 93 | Supply and plantingAshoka, Pendula, Mango, Neem,Peepal, Sheesham etc in pits including cost of all materials, labour and T&p etc complete in all respects.(Cost of digging pitshall be paid separetely as per item no. 23.08).(CSI No. 23.12) |
| 94 | Providing and fixing 15 mm dia B-class Jindal,JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.01a) |
| 95 | Same as 89 above but for 20 mm dia. (CSI No. 26.01b) |
| 96 | Same as 89 above but for 25 mm dia. (CSI No. 26.01c) |
| 97 | Providing and fixing full way 15mm dia G.M. gate valvewith wheel, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.04a) |
| 98 | GM Full way Gate Valve 20 mm dia. (CSI No. 26.04b) |
| 99 | GM Full way Gate Valve 25 mm dia. (CSI No. 26.04c) |
| 100 | Providing and fixing PVC BALL FLOAT VALVE 15 mm dia. WITH BRASS & UNION COMPLETE, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.06a) |
| 101 | Providing and fixing PVC CONNECTION PIPE, 300X15 with 2 brass units ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.09) |
| 102 | Supply and fixing of Syntex or equivalent make water storage tank including all materials, labours, T&P etc required for proper completioon of work. (CSI No. 26.12) |
| 103 | P/FBRASS BIB COCK, 15 mm dia (200 gsm) ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.13b) |
| 104 | Supply and fixing of 15 mm dia CI/ PVC bib cock including replacing of old bibcock complete.(CSI No. 26.13c) |
| 105 | P/F BRASS STOP COCK, 15 mm dia ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.14a) |
| 106 | Providing and fixing CP BRASS BIB COCK15 mm dia. HEAVY QUALITY ( 200gm) ( L & K and equi.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.16b) |
| 107 | CP BRASSSTOP COCK 15 mm dia. HEAVY QUALITY ( 400gm) ( L & K and equi.)(CSI No. 26.16c) |
| 108 | CP BRASS SHOWER HEAVY QUALITY ( > 225 gms )(CSI No. 26.16e) |
| 109 | CP BRASS Angle Valve HEAVY QUALITY( L&K or equi. )(CSI No. 26.16i) |
| 110 | CP BRASS Piller cock HEAVY QUALITY ( L&K or equi. )(CSI No. 26.16j) |
| 111 | CONCEALED STOP COCK HEAVY QUALITY ( L&K or equi. )(CSI No. 26.16k) |
| 112 | Providing and fixing of 110 mm dia PVC pipe 6 Kg/ Sq.cm forwith special such as Tee, bend, socket, elbow etc including supply of all labour,material,T & P etc complete required for proper completion of work. (CSI No. 26.17) |
| 113 | Supply and fixing white glazed earthern ware W.C.\"Orissa\" PanHindustan or equivalent make of size (58 x 44cm.), including P/F white glaged P or S trapincluding supply of allmaterials,labour and T&P etc.complete. (CSI 27.01+27.23) |
| 114 | Providing and fixing 550X400 mm wash hand basin of white glazed earthern ware first quality I.S.I. marked (Hindustan,Neycer / Cera make) including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 27.08) |
| 115 | Providing and fixing 10 littres low level PVC flushing cistern, COMPLETE WITH ALL FITTINGS including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 27.12) |
| 116 | Providing and fixing in position 32 mm. dia P.V.C. flush pipe. for W.C. with unions, bends etc. including supply of all materials,labour and T&P etc.required for proper completion of the work. (CSI No. 27.13) |
| 117 | Providing and fixing in position 32 mm. dia P.V.C.WASTE PIPE FOR WASH BASIN. including supply of all materials,labour and T&P etc.required for proper completion of the work. (CSI No. 27.14) |
| 118 | Providing and fixing 600 mm x 450 mm beveled edge mirror of Atul,Kiran makeglass with Indian polish 6.50 mm thick complete with back of 600 mm x 450 mm x 6 mm hard board sheet fixed to wooden cieats with C.P. brass screws and washers including supply of all materials, labour and T&P etc.required for proper completion of the work. (CSI No. 27.15) |
| 119 | Supply and fixing CP Nahani Trap India make of heavy approved quality complete with CI grating,includingsupply of all materials,labour and T&P etc. required for proper completion of the work. (CSI No. 27.21a) |
| 120 | Removal of cinder from W.C. and bath and its disposal within 50 metres lead including cost of all labour and T&P etc. required for proper completion of the work. (CSI No. 27.22) |
| 121 | Providing and fixing 100 mm dia white glazed \"P\" or \"S\" trap including cement concrete and all materials, labour cartage T&P etc.required for proper completion of the work.(For W.C.) (CSI No. 27.23) |
| 122 | Supply & fixing of 15 mm dia. G.I.fittings.(Water Supply Material item + 10% CP) |
| 123 | Tee(2a) |
| 124 | Bend (4a) |
| 125 | Elbow (5a) |
| 126 | Socket(6a) |
| 127 | Union (16a) |
| 128 | Supply & fixing of 20 mm dia. G.I..(Water Supply Material item + 10% CP) |
| 129 | Tee(2b) |
| 130 | Bend (4b) |
| 131 | Elbow (5b) |
| 132 | Socket(6b) |
| 133 | Union (16b) |
