Hindustan Copper Limited-HCL has published Rfq9330 Operation Of Dewatering Pumps In Kcc Mines Rfq9330 Operation Of Dewatering Pumps In Kcc Mines. Submission Date for this Tender is 28-08-2021. Dewatering Pump Tenders in HCL/KCC Rajasthan. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Vibration Feeder at 60 ML operation for minimum 100MT in shift |
| 2 | Daily inspection and Rectification |
| 3 | Bottom Liner Plate: preparation (Cutting of Plate (600mm x 620 mm) and CSK Drill Hole (6no.))/ Shifting/ Replacement of single liner plate/ Shifting of old liner. |
| 4 | 1st Column Side Plate Liner: preparation (Cutting of Plate (1490mm x 2530 mm) with CSK Drill Hole (24no.))/ Shifting/Replacement of single liner plate/ Shifting of Old liner |
| 5 | 2nd Column of Side Plate Liner: preparation (Cutting of Plate (1030mm x 900mm) and CSK Drill Hole (6no.))/ Shifting/Replacement of single liner plate/ Shiftingof old liner |
| 6 | Skirt plate: preparation of SKIRT plate Liner (Cutting of Plate (300 mm x 6000mm) and CSK Drill Hole 12 no.)/ Shifting/Replacement ofsingle liner plate/ Shiftingof old liner |
| 7 | Inclined plate : preparation of Incline plate (Cutting of Plate (1500 mm x 1500mm) / Shifting/Replacement of single plate/ Shiftingof old plate |
| 8 | Triangular plate : preparation of triangular plate (Cutting of Plate (1500 mm x 1500mm)and CSK Drill Hole 12 no.) / Shifting/Replacement of single plate/ Shiftingof old plate |
| 9 | Shifting ofdrum / Replacement of Gear Oil/ Shifting of used oil |
| 10 | Replacement of Gear pair: Drainage of Gear oil/ removal of Cover/ removal of drive and driven Gears/ Fitting of Gears /Fitting of Covers/ Filling of Gear Oil. |
| 11 | Replacement of Feeder Motor / Shifting of used Motor |
| 12 | Shifting and Replacement of Feeder shaft (Drive /Driven)/ Shifting of used Shaft |
| 13 | Replacement of Bearings of Feeder shaft (Drive /Driven) |
| 14 | Shifting of Support beam ISMB 150mm / replacement of support beam/ Shifting of Old beam |
| 15 | Spring: Shifting of Spring/ Removal of Spring /replacement of Spring |
| 16 | Preparation (cutting 90lb rail / chain )and Replacement of Chain Curtain: |
| 17 | Feeder Mouth Beam: Removal and Replacement 300mm x 2500 mm installed at Feeder Mouth |
| 18 | Miscellaneous job (Rectification Feeder Pan / Oil Drum / Lower Flange for Oil drum/ Pivots for springs / Feeder mouth Beam, Etc.) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
