|
| 1 | Dismantling of OH ACSR conductor of any size and removing unserviceable conductor from site complete all as specified & as directed. |
| 2 | Dismantling of LT insulators any type or size complete all as specified & as directed. |
| 3 | Dismantling of cross arms of MS channels or angle, section etc complete and setting aside for reuse complete all as specified & as directed. |
| 4 | Dismantling of old unserviceable earth wire/cradles of any size or distributor span, complete all as specified & as directed. |
| 5 | Supply, fixing and testing of LT Aerial bunch cable on existing steel/PCC poles with XLPE insulated LT Aerial Bunch cable heavy duty 1100 volts grade with aluminium conductor of cross section area 150 sqmm X 3 core + 16 sqmm X 1 core with insulated messenger cum neutral conductor of size 95 sqmm X 1 core including all fixing accessories such as suspension clamp, piercing connector, dead end etc complete all as specifed and as directed. Make: Havells/Polycab/Grandlay |
| 6 | Supply, fixing and testing of LT Aerial bunch cable on existing steel/PCC poles with XLPE insulated LT Aerial Bunch cable heavy duty 1100 volts grade with aluminium conductor of cross section area 95 sqmm X 3 core + 16 sqmm X 1 core with insulated messenger cum neutral conductor of size 70 sqmm X 1 core including all fixing accessories such as suspension clamp, piercing connector, dead end etc complete all as specifed and as directed. Make: Havells/Polycab/Grandlay |
| 7 | Supply, fixing and testing of LT Aerial bunch cable on existing steel/PCC poles with XLPE insulated LT Aerial Bunch cable heavy duty 1100 volts grade with aluminium conductor of cross section area 50 sqmm X 3 core + 16 sqmm X 1 core with insulated messenger cum neutral conductor of size 35 sqmm X 1 core including all fixing accessories such as suspension clamp, piercing connector, dead end etc complete all as specifed and as directed. Make: Havells/Polycab/Grandlay |
| 8 | Supplying, transporting and erecting in position steel tubular swaged poles 410-SP-31 type, 9.00 Mtr long complete with mild steel base plate, CI finial taper , bolts, nuts and washers etc. including necessary excavation and earth work , PCC 1:4:8 type D-2 in foundations below pole, PCC 1:3:6 type C-2 around poles and PCC 1:3:6 type C-1 as in plinth block asdirected, disposal of surplus soil to a distance not exceeding 50 m and depositing where directed, painting steel tubular poles exposed surafces with Aluminium paint two coats over one coat of red oxide primer and providing 300 mm wide bands (3 bands/ straps withsynthetic enamel paint and 2 bands with Black bituminous paint ) from plinth block and numbering of poles , painting embedded portion of poles with one coat of bituminous paintincluding disconnectingand taking outold damaged PCC pole complete all as specified and directed. |
| 9 | M & L for cross arms, bracing clamps and back plates fabricated from structural steel section including nuts, bolts, washers etc, drilling hole for bolts in any shape or size complete with welding, binding, two coats of aluminium paint over a coat of primer for fixing flood lights complete all as specified and directed. |
| 10 | Supply and fixing pole mounted junction box/bus bar chamber for connection of single phase service connection of size 400x300x190 mm with 63 amps alluminium 4 nos busbar wrapped with PVC sleeves andmaintained the colour code and provision of making holes with GI nuts, bolts & washers for connections and mounted on hydrograpic insulators with nuts & bolts at both ends of busbar complete all as specified and as directed.Make: Sintex , Cat No: GSJB4030 or equivalent model of Hensel/Rittel. |
| 11 | Supply and fixing pole mounted junction box/bus bar chamber for loop connection of street light cable of size 240x130x95 mm with 2 nos 32 amps aluminium busbar wrapped with PVC sleeves andmaintained the colour code and provision of making holes with GI nuts, bolts & washers for connections and mounted on hydrograpic insulators with nuts & bolts at both ends of busbar and suitable arrangement for fixing one no MCB complete all as specified and as directed.Make: Sintex , Cat No: GSJB2817 or equivalent model of Hensel/Rittel. |
| 12 | Supply, fixing and testing of ceiling fan 1200 mm sweep, heavy duty, single phase, AC, 230 Volts, 50Hz, BEE 5 star rating, ISI marked complete with down rod, canopy, blades, BLDC motor etc and connecting up complete including complete connection from ceiling rose to fan including writing of MES Number with synthetic enamel paint complete all as specified and as directed. Make- Bajaj/Usha/ Crompton Greaves/Havell\"s. |
| 13 | Supply, fixing and testing of ceiling fan 1400 mm sweep, heavy duty, single phase, AC, 230 Volts, 50Hz, BEE 5 star rating, ISI marked complete with down rod, canopy, blades, BLDC motor etc and connecting up complete including complete connection from ceiling rose to fan including writing of MES Number with synthetic enamel paint complete all as specified and as directed. Make- Bajaj/Usha/ Crompton Greaves/Havell\"s. |
| 14 | Supply, fixing and testing of high performance metal body exhaust fan 450 mm sweep, 1400 RPM240 volts AC 50 Hz,heavy duty connecting up to ceiling rose/ connector by 1.5 sqmm copper conductor cable and four Nos suitable size nuts, bolts and washer with proper grouting in wall as per site requirement complete all as specified and directed. Make- Bajaj/Usha/ Crompton Greaves/Havell\"s. |
| 15 | Supply, fixing and testing of high performance metal body exhaust fan 380 mm sweep, 1400 RPM240 volts AC 50 Hz,heavy duty connecting up to ceiling rose/ connector by 1.5 sqmm copper conductor cable and four Nos suitable size nuts, bolts and washer with proper grouting in wall as per site requirement complete all as specified and directed. Make- Bajaj/Usha/ Crompton Greaves/Havell\"s. |
| 16 | Supply, fixing and testing of high performance metal body exhaust fan 300 mm sweep, 1400 RPM240 volts AC 50 Hz,heavy duty connecting up to ceiling rose/ connector by 1.5 sqmm copper conductor cable and four nos suitable size nuts, bolts and washer with proper grouting in wall as per site requirement complete all as specified and directed. Make- Bajaj/Usha/ Crompton Greaves/Havell\"s. |
