Construction Of Manifold Room And Ht Meter Room At Chc Sanchore, District Jalore
Tender Value
9.60 Lakhs
Estimated cost
Bid Submission
12 Aug 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sanchore → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Manifold Room And Ht Meter Room At Chc Sanchore, District Jalore
BOQ
| Sl. No. | Item Description |
| 1 | PART (A) Manifold Room Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed within a lead of 50 meter.All kinds of soil. |
| 2 | Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering All up to plinth level 1:4:8 (1Cement :4 Course Sand :8 Graded stone aggregate 40 mm nominal size (Crusher Broken) |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth , consolidatingeach deposited layer by ramming and watering including lead upto 50Mtr. and lift upto 1.5Mtr. |
| 4 | Random Rubble stone masonary for foundation and plinth in Cement Sand Mortar above 30 Cm. thick wall in : Cement Mortar 1:6 (1-Cement:6-Sand). |
| 5 | Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways and removal of formwork for foundations in basements rafts, footings, strap beams, bases of columns , etc. up to plinth level. |
| 6 | Providing and laying in position specified grade of reinforced cement concrete including curing compaction finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement.All work up to plinth level : R.C.C grade M20 |
| 7 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level. All steel shall be procured from \"Original producers\" who manufacture billets directly from iron ores and roll the billets to produce steel conforming to IS :1786, etc as per specification form road and bridge works of MORTH fifth revision April 2013, Clause 1009.3.1 Tremo Mechanically treated bars |
| 8 | Reinforced cement concrete work in beams, suspended floors, roofs, girders having slopes up to 15o , landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases, up to floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good and joints excluding the cost of centering, shuttering and reinforcement: |
| 9 | Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways with wooden members andremoval of formwork for superstructure up to 4.5 mtr aboveplinth,for: walls (any thickness) |
| 10 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished:20mm thick. |
| 11 | Polished Blue Kota Stone flooring skirting, laid over 20 mm thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete : For area of each slab up to 2001 to 5000Sq. Cm :(A) 25 mm thick slab. |
| 12 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work including preparation of base with primer, putty, lippy complete in all respect. |
| 13 | Painting with enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work. |
| 14 | Providing and 30mm thick Rajshri Brand Factory made Solid Panel PVC Door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm for stiles & 15mmx15mm for top and bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded \"Rajshri\" PVC \"C\" Channel of size 30x50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail and bottom rail on either side, & 10mm (5mmx2) thick, 20mm wide cross PVC sheets as gap insert for top rail & bottom rail.Providing and 30mm thick Rajshri Brand Factory made Solid Panel PVC Door shutter consisting of frame mPanelling of 5mm thick PVC sheet to be fitted in the M.S. Frame welded/sealed to the stiles & rail with 30mm wide x 5mm thick PVC sheet beading on either side and joined together with solvent cement adhesive. An additional 5mm thick PVC strip o f 20mm width is to be stuck on the interior side of \"C\" Channel using PVC solvent cement adhesive etc. complete as per direction of Engineer-in-charge, manufacturer\"s specification & drawing (For W.C. & Bathroom shutters). |
| 15 | P&F of PVC door frame made from extruded PVC confirming to IS : 10151 - 1982 section having multi chamber cross section with a maximum wall thickness of 2.8mm + 0.3mm duly reinforced with steel tie rod at bottom, and weather seals complete. PVC door frame section (68x60mm) |
| 16 | Providing and laying Chequerred plain cement concrete embossed specially manufactured non-slipping tiles of approved make 20 mm thick laid on 20 mm thick bed of cement mortar 1:6 jointed with neat cement slurry complete. Add extra for chequerred coloured plain cement concrete or specially manufactured non-slipping tiles of approved make 20 mm thick. |
| 17 | Bricks masonry in superstructureup to thrid storey with bricks of class designation 75 mm in cement mortar 1:4 |
| 18 | Painting wether coat paint (asin paint i ci berger or eq isi make paint ) two or more coat to give an even shade on new work. |
| 19 | Structural steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete above plinth level up to 4.5 Mtr. height in R.S. Joists flats, tees, angles and channels. |
| 20 | Providing and fixing steel glazed window frame made out of 80x40 mm hollow sheet section of 16 gauge thickness, joint mitred welded and grinded including hold fast of steel lugs 13mm x 3mm and 15 Cm. long embedded in C.C. block 15x10x10 Cm. of 1:3:6 nominal concrete and including fixing of pivoted hinges of superior quality, window shutters made out of 55x20mm hollow steel section 15 mm paitam of 18 gauge thickness, joint mitred and grinded including 10mm x 10mm square bars welded to frame for paitam fixing float glass 4 mm thick panes with glazing clips and metal sash putty and fixing of shutters frames peg stay, U shape handle 100 mm long, tower bolts 100 mm long of steel power coated superior quality including fixing and jointing with frame hinges priming coat with steel primer complete in all respect as per direction of Engineer-in-charge. |
| 21 | Providing and fixing Ist quality standard White Ivory straight edge Glazed Tiles ISI marked [IS:13753] (Kajariya, Jhonson, Somani make etc. ) of size 450mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster). |
| 22 | P & F Plain Fiber glass sheet (FRP sheet fiber Reinforcement product sheet confirming to IS:12866-1989 having minimum thickness as below including fixing with nuts bolts hooks and bitumen washer etc. complete.)3mm thick (wt 5.0 kg p. sqm ) |
| 23 | Electrical Work : Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) ofapproved make in surface / recessed ISI marked medium duty PVC conduit & it\"s accessories, round tiles,Hot Dipped Galvanized Modular Box with earth terminal, 6 A Modular switch,Modular plate with grid plate,screws,making connections, testing etc. as required.Gr 1 Short point (up to 3 mtr.) |
| 24 | Medium point (up to 6 mtr.) |
| 25 | Long point(up to 10 mtr.) |
| 26 | Wiring of 3 pin 5 amp. Light plug point with 1.5 sq. mm nominal sizeFR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved makein surface / recessed ISI marked medium duty PVC conduit & it\"s accessories, Hot Dipped Galvanized M.S Modular box of 20 SWG with earth terminal, 6 A modularswitch, 6 A modular socket, Modular plate with grid plate, screws, making connections, testing etc. as required.Gr 1 On board |
| 27 | Supplying and fixing of power plug point Modular accessories on hot dipped galvanized modular on surface or in recessed with suitable size of grid plate with cover plate including cost ofmodular 16 amp. Switch and socket outlet, making connection , testing , etc. as required.Gr 1 |
| 28 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existingsurface or recessed conduit/casing capping including making connections etc. as required.G1 2 x 2.5 sq. mm. + 1x1.5sqmm |
| 29 | 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. |
| 30 | P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with copper bus bar, shorting link , neutral link, earth link and din bar, conforming to IS13032 & IS8623 including making internal DBterminations with copper lugs , testing etc. as required.G1 Double door (single phase) 12 way |
| 31 | P&F 240/415 V MCB of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required.GROUP 1 Single pole MCB6 A to 32 A rating |
| 32 | Double pole MCB40-63 A |
| 33 | S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required includingcutting the wall and making good the same as required.GROUP 1 25 mm |
| 34 | P & F phenolic laminated sheet 2.0 mm thick of size 75 mm dia. Including screws, cup washer as required. |
| 35 | P & F following modular accessories made out of unbreakable and fire retardant poly carbonate with silver contacts including making connections testing etc. as required 5 step fan regulator 2 ModuleGr 1 |
| 36 | P & F 18 swgM.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm,12 mm dia rod fan hook with 100 mmlength extended on each side |
| 37 | P&F of Heavy duty capacitor start 900/1400 RPM single phase ISI marked Exhaustfan,IS:2312 marked in existing opening including making connections testing etc. as required.GROUP 1 300 mm sweep(900/1400 RPM) |
| 38 | P & F of Gravity Louver shutter of superior quality made out of frame of18 swg M.S. sheet & Louvers made from 24 swg MS Sheetwith enamel paint including cost of nuts, bolts, etc as reqd. Up to 380 mm size |
| 39 | P & F of IP 20 LED tube light 20 watt with external batten made from CRCA sheet steel suitable to replace T-B/T-12 tube light, integral driver, 2000 luman + 5olo tolerarrce system luman efficiacy of 100 Lm/ watt minimum expected life time of 25000 burning hours, CCT 5700 I( ANSI, CRI 80, driver efficiency >850/o, Life expectancy of driver rnin 30000 hrs. PF 0,95 at full load/ 230 volt AC.Gr 1 |
| 40 | P & F double ball bearing capacitor start, aluminium body & blade ceilingfanwith down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. 1200 mm sweep Gr 1 |
| 41 | P/Laying P.V.C. insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I of Group2of approved makein ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick underlayer ofsand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size.GROUP 1 (armoured) In existing RCC/HUME/STONEWARE PIPE 10.0 Sq.mm 2 core |
| 42 | S & Laying following size earth wire/stripin horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 8 SWG copper wire |
| 43 | 25 mm Dia. |
| 44 | Supplying and drawing PVC/ Polythene insulated and PVC sheathed unarmoured/ armoured telephone cable with 0.5 mm dia. Tinned /annealed copper conductor taped &confirming to ITD specification S/WS -113C ofapproved make in existingsurface or recessed conduit/casing capping. Unarmoured Telephone cable in existingsurface or recessed conduit/casing capping. 2 pair |
| 45 | P & F ISI markedflush type single line telephone jack including making connection testing etc. as required. |
| 46 | Supply , Drawing and Testing of 4 pair, 24 AWG UTP Cat 6 Cable as per latest ammendments of TIA /EIA 568 B.2-1 Specifications in existing MS/PVC Conduits including making connections to Information outlets and Patch Panels with ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing required |
| 47 | Supply and Installation of Information outlets made of high impact plastic body ABS FR Grade with spring loaded collapsible shutters in jack Recess, suitable for Cat 6 application complying to latest ammendments EIA/ TIA 568 B.2-1 Specifications in existing modular /MS Boxes along with necessory connections as required |
| 48 | Supply & fixing of Faceplate for Flush / SurfaceMount Information Outlets Single Aperture with screw hole covers & Icon Tree Size 86mmX86mm Single Aperture |
| 49 | PART (B) MT Meter Room : Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed within a lead of 50 meter.All kinds of soil. |
| 50 | Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering All up to plinth level 1:4:8 (1Cement :4 Course Sand :8 Graded stone aggregate 40 mm nominal size (Crusher Broken) |
| 51 | Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth , consolidatingeach deposited layer by ramming and watering including lead upto 50Mtr. and lift upto 1.5Mtr. |
| 52 | Random Rubble stone masonary for foundation and plinth in Cement Sand Mortar above 30 Cm. thick wall in : Cement Mortar 1:6 (1-Cement:6-Sand). |
| 53 | Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways and removal of formwork for foundations in basements rafts, footings, strap beams, bases of columns , etc. up to plinth level. |
| 54 | Providing and laying in position specified grade of reinforced cement concrete including curing compaction finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement.All work up to plinth level : R.C.C grade M20 |
| 55 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level. All steel shall be procured from \"Original producers\" who manufacture billets directly from iron ores and roll the billets to produce steel conforming to IS :1786, etc as per specification form road and bridge works of MORTH fifth revision April 2013, Clause 1009.3.1 Tremo Mechanically treated bars |
| 56 | Reinforced cement concrete work in beams, suspended floors, roofs, girders having slopes up to 15o , landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases, up to floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good and joints excluding the cost of centering, shuttering and reinforcement: |
| 57 | Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways with wooden members andremoval of formwork for superstructure up to 4.5 mtr aboveplinth,for: walls (any thickness) |
| 58 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished:20mm thick. |
| 59 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work including preparation of base with primer, putty, lippy complete in all respect. |
| 60 | Painting with enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work. |
| 61 | Bricks masonry in superstructureup to thrid storey with bricks of class designation 75 mm in cement mortar 1:4 |
| 62 | Painting wether coat paint (asin paint i ci berger or eq isi make paint ) two or more coat to give an even shade on new work. |
| 63 | Structural steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete above plinth level up to 4.5 Mtr. height in R.S. Joists flats, tees, angles and channels. |
| 64 | Supplying and fixing of Steel windows made out (65x40mm), hollow metal pressed section of 1.25 mm thick sheet F4 & F7 standard rolled section conforming to IS 1038 with wholly openable shutter of 0.80 mm thick (out side & inside) opening C.R. sheet embossed panels, joints matted and flush welded with suitable hinges, steel lugs & screws with approved oxidized steel handles, fittings, peg stays (casement stays) etc. complete in all respect including providing 10 mm square M.S. bars 10 Cm. C/C and applying priming coat of red oxide paint. |
| 65 | Providing and fixing pressed steel mitred door frames manufactured from commercial mild steel sheet of 1.25 mm (16 gauge) thickness including hinges jamb, lock jamb, head and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25 mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge.Profile (B) |
| 66 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal, dehydreresin in glue both sides with approved steel fittings complete as per Annexure ‘A’ 30 mmthickness |
| 67 | Cement concrete flooring grade 1:2:4 (1-Cement:2-Coarse sand:4-graded stone aggregate) rounding off edges etc. but excluding the cost of nosing of steps etc. complete : 50mm thickness 20 mm thick nominal size |
| 68 | P & F Plain Fiber glass sheet (FRP sheet fiber Reinforcement product sheet confirming to IS:12866-1989 having minimum thickness as below including fixing with nuts bolts hooks and bitumen washer etc. complete.)3mm thick (wt 5.0 kg p. sqm ) |
AI Tender Summary
Tender Timeline
Aug 08, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedAug 12, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 13, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender