Public Works Department-PWD has published Up-Gradation Of Infrastructure Of Chandraipara H.S Up-Gradation Of Infrastructure Of Chandraipara H.S School At Ambassa, Dhalai Tripura During The Year 2021-22 / Sh- Building Works Including Internal Water Supply, Sanitary Installations And Internal E. Submission Date for this Tender is 06-09-2021. Electrification Work Tenders in Ambassa Tripura. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | SUB-HEAD : EARTH WORK |
| 2 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
| 3 | SUB-HEAD : CEMENT CONCRETE WORK |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level. |
| 5 | (i) 1:4:8 ( 1 Cement: 4 fine sand : 8 graded stone aggregate 40 mm nominal size) |
| 6 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer"s specification |
| 7 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
| 8 | SUB-HEAD : REINFORCED CEMENT CONCRETE WORK |
| 9 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement- - All work upto plinth level: |
| 10 | (i) 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 11 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement- |
| 12 | (i) 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 13 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement- |
| 14 | (i) 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 15 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete uptoplinth level. |
| 16 | (i) Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 17 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. |
| 18 | (i) Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 19 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but, excluding cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 fine sand : 3 graded stone aggregate 20mm nominal size). |
| 20 | Centering shuttering including struttings, propping etc. and removal of form work for: |
| 21 | (i) Foundations, footings, bases for columns etc. for mass concrete with timber plank |
| 22 | (ii) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. using shuttering ply |
| 23 | (iii) Suspended floors, roofs, landings, balconies and access platform with timber planks |
| 24 | (iv) Stairs (excluding landings) except spiral-staircases with wooden plank |
| 25 | (v) Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards. |
| 26 | (vi) Edges of slabs and breaks in floors and walls under 20 cm. wide |
| 27 | (vii) Weather shade, Chajjas, corbels etc., including edges. |
| 28 | Providing and fixing sheet covering over expansion joints with iron screws as per design to match the colour / shade of wall treatment |
| 29 | (i) Aluminium fluted strips 3.15 mm thick: 200 mm wide |
| 30 | SUB-HEAD : BRICK WORK |
| 31 | First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete. |
| 32 | (i) In cement mortar 1:6 ( 1 cement : 6 fine sand ). |
| 33 | Half brick masonry with first class bricks in foundation and plinth including cost of all materials as required complete:- |
| 34 | (i) In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 35 | SUB-HEAD : CLADDING WORK |
| 36 | Providing and fixing stone slab with table rubbed, edges rounded and polished of size 75x50 cm deep and approved thickness fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth including rubbing, curing etc. complete at all levels as required (measurement should be of exposed finished work):- |
| 37 | (i) White Agaria Marble Stone of approved shade of 18 mm thick (75 x 50 cm). |
| 38 | SUB-HEAD : WOOD & PVC WORK |
| 39 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position : |
| 40 | (i) Sal wood |
| 41 | Providing and fixing panelled / or panelled and glazed shutters for doors, windows and clerestory windows includingISI marked bright finished / black enamelled M.S butt hinges with necessary screws excluding panelling and or glazing, which will be paid for separately but including the wooden beading of 20 × 12 mm for fixing panelling and or glazing as per direction of Engineer-In-Charge. |
| 42 | (i) Gamair Wood - 35 mm thick shutters |
| 43 | Providing 40 × 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30 × 10 × 15 cm 1:3:6 mix (1 cement : 3 fine sand : 6 graded stone aggregate 20mm nominal size) |
| 44 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 45 | (i) 300 x 16 mm |
| 46 | (ii) 250 x 16 mm |
| 47 | Providing and fixing ISI marked aluminium tower bolts anodised (anodised coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. |
| 48 | (i) 300 x 10 mm |
| 49 | (ii) 250 x 10 mm |
| 50 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 51 | (i) 125 mm |
| 52 | (ii) 100 mm |
| 53 | Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. |
| 54 | (i) Single rubber stopper |
| 55 | Providing and fixing factory made door frame (single rebate) made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 60mm width & 30mm thickness and shall be fixed to wall as per instructions of Engineer-In-Charge using 100x8 sheet metal CSK screws. |
| 56 | Providing and fixing 28 mm thick door shutter made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71mm width & 28mm thick as vertical & horizontal styles. Joints are made using solventadhesive and GI ‘C sections (39mm x 19mm x 0.6mm thick) or M S pipe (40mm x 20mm ) stiffener frame insert & telescopic polymeric ‘L’ corners .The panel shall be filled with 3mm thick high - pressure compact laminate as per manufacturer’s specifications and directions of the Engineer-in-charge, cover moulding shall be provided for covering fixing screws and elegant look.( for W.C. bathroom door shutter). |
| 57 | Providing 50 × 50 × 50 mm Gamair wood plugs including cutting brick work and fixing in cement mortar 1:3 (1 cement: 3 fine sand) and making good the walls etc. |
| 58 | Providing and fixing IS : 3564 marked Aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. complete. |
| 59 | SUB-HEAD : STEEL WORK |
| 60 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm at 100 mm centre to centre and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia. steel pulleys& with riveted bolts, nuts, locking arrangement, stoppers, handles, hold fast /anchor bolt including embedding in cement concrete of required grade for fixing in position, all necessary fittings,including applying a priming coat of approved steel primer etc. complete as required. |
| 61 | Providing and fixing M.S. round holding down bolts with nuts and wahser plates complete as per standard design. |
| 62 | SUB-HEAD : ALUMINIUM WORK & STRUCTURAL GLAZING |
| 63 | Providingandfixingaluminiumworkfordoors,windows,ventilators, stair railing including hand rail andpartitionswithextrudedbuiltupstandardtubularsections/ appropriateZsectionsandothersectionsofapprovedmake conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws orwithfixingclips,orwithexpansionholdfastenersincluding necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawingandthedirectionofEngineerincharge.(Glazingand paneling to be paid for separately) :- |
| 64 | (i) For fixed portion of approved quality:- - Anodisedaluminium(anodisedtransparentordyedto requiredshadeaccordingtoIS:1868,Minimumanodic coating of grade AC 15). |
| 65 | (ii) For shutters/ sliding shutters of doors, windows & ventilatorsincluding providing and fixing hinges / pivots / rollers and making provision for fixing fittings wherever required including the cost of PVC / neoprene gasket required of approved quality ( Fittings shall be paid for separately ):- - Anodisedaluminium(anodisedtransparentordyedto requiredshadeaccordingtoIS:1868,Minimumanodic coating of grade AC 15). |
| 66 | Providing and fixing glazing of approved quality in aluminium doors,windows, ventilator, shutters and partition etc. with EPDM rubber / neoprene gasket etc. complete as per architectural drawing and the direction of Engineer-in-charge (Cost of snap beading shall be paid in basic item) :- |
| 67 | (i) With glass/float glass panes of 4.0 m thickness ( weight not less than 10.0 kg / sqm ) |
| 68 | (ii) With glass/ float glass panes of 5.5 m thickness ( weight not less than 13.75 kg / sqm ) |
| 69 | Providing and fillling the gap in between aluminium frame and adjacent RCC / brick work by providing weather silicon sealant over backer rod of approved quality etc. complete as per architectural drawing and direction of the Engineer-in-charge. (i) upto 5 mm depth and 5 mm width |
| 70 | Providing and fixing stainless steel (SS 304 grade) adjustable friction window stay of approved quality with necessary stainless steel screws etc. to the side hung windows etc. complete as per direction of Engineer-in-charge |
| 71 | (i) 205 x 19 mm |
| 72 | Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. of approved quality completeas per direction of Engineer-in-charge:- |
| 73 | (i) Anodised aluminium of grade AC 15 ). |
| 74 | Providing and fixing 100 mm brass locks ( best make of approved quality ) with 6 levers without pair of handles for aluminium doors including necessary cutting and making good etc. completeas per direction of Engineer-in-charge. |
| 75 | SUB-HEAD : FLOORING WORK |
| 76 | Providing and fixing precast chequered cement concrete tiles 18 mm thick, laid in footpath & courtyard, on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with neat cement slurry including rubbing and cleaning complete as per direction of the Engineer-inCharge |
| 77 | Providing and fixing Kota stone in floors over 20 mm thick bed of cement mortar 1:4 (1 cement : 4 fine sand) jointed with ordinary cement sluury including pointing with ordinary cement mixed with pigment of matching shade, including rubbing and polishing complete. |
| 78 | (i) Kota stone slab 25 mm thick |
| 79 | Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 fine sand) and joined with ordinary cement sluury mixed with pigment to match the shade of slabs, including rubbing and polishing complete. |
| 80 | Providing and laying ceramic floor tiles in different sizes(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 - 2017 of approvedmake in colours such as White, Ivory, Grey, Fume Red Brown, laid over 20 mm thick cement mortar 1:4 (1 cement : 4 fine sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. complete. (i) Mat Finish Tiles - Ceramic Tiles 1st quality 300 x 300mm in all shades and designs |
| 81 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 ( thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1 : 3 ( 1 cement : 3 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete. |
| 82 | SUB-HEAD : ROOFING WORK |
| 83 | ProvidingandfixingonwallfaceunplasticisedRigidPVCrainwater pipes (working pressure 4 kg / cm2)conformingto IS : 13592 Type Aincludingjointingwith sealring conformingtoIS:5382leaving10mmgapforthermalexpansion: |
| 84 | (i) Single socketed pipe - 110 mm OD |
| 85 | Providingandfixing on wallface unplasticised - PVCmouldedfittings/ accessoriesfor unplasticised Rigid PVC rain water pipes conforming to IS:13592TypeAincludingjointingwith sealringconformingtoIS: 5382 leaving 10 mm gap forthermalexpansion: |
| 86 | (i) Coupler - 110mm |
| 87 | (ii) Single equal tee without door - 110 x 110 x 110 mm |
| 88 | (iii) Single equal tee with door - 110 x 110 x 110 mm |
| 89 | (iv) Bend 87.5 - 110mm |
| 90 | (v) Plain shoe - 110 mm |
| 91 | Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised-PVCrainwater pipesbymeansof50x50x50mmhard woodplugs,screwedwithM.S.screwsofrequiredlengthincluding cutting brick work andfixing with cement mortar 1 : 4 (1cement : 4 fine sand) making good the wall etc. complete. |
| 92 | (i) 110mm |
| 93 | Providing and fixing to the inlet mouth of rain water pipe PTMT grating with thickness of 8mm and weighing not less than 100gm. complete. |
| 94 | (i) 100mm |
| 95 | SUB-HEAD : FINISHING WORK |
| 96 | 12 mm cement plaster of mix |
| 97 | (i) In cement mortar 1 : 4 ( 1 cement : 4 fine sand ) |
| 98 | (ii) In cement mortar 1 : 6 ( 1 cement : 6 fine sand ) |
| 99 | 6 mm cement plaster of mix : |
| 100 | (i) In cement mortar 1 : 3 ( 1 cement : 3 fine sand ) |
| 101 | Neat cement punning. |
| 102 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : (i) New work ( two or more coats) over and including water thinnable priming coat with cement primer. |
| 103 | Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : (i) New work ( two or more coats applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 104 | Applying priming coat [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : |
| 105 | (i) With ready mixed Pink or Grey primer of approved brand and manufacture on wood work ( hard & soft wood ). |
| 106 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]: (i) Two or more coats on new work |
| 107 | SUB-HEAD: WATER PROOFING & REHABILITATION WORK |
| 108 | Grading roof for water proofing treatment complete as required as per direction of the Engineer-in-charge with : |
| 109 | (i) Cement Mortar 1:3 ( 1 cement : 3 fine sand) |
| 110 | SUB-HEAD : SANITARY INSTALLATION |
| 111 | Providingandfixingwhitevitreouschinapedestaltypewatercloset (Europeantype W.C.pan)withseatandlid,10litrelowlevelwhite P.V.C.flushing cistern withmanually controlled device (handlelever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : |
| 112 | (i) W.C. pan with ISI marked white solid plastic seat and lid |
| 113 | Providing and fixing White vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm and 340 x 410 x 265 mm sizes respectively |
| 114 | Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. |
| 115 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings: |
| 116 | (i) Flat back wash basin of size 550x400mm. |
| 117 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 118 | (i) Semi rigid pipe - 32 mm dia |
| 119 | (ii) Flexible pipe - 32 mm dia |
| 120 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 121 | Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 122 | Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colours weighing not less than 80 gms |
| 123 | Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colours weighing not less than 105 gms |
| 124 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/ cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. : |
| 125 | (i) For 100 mm dia. Pipe |
| 126 | Providing and fixing heel rest sanitary bend (i) 100 mm dia - Sand cast iron S&S as per IS - 1729 |
| 127 | Providing and fixing single equal plain junction of required degree (i) 100x100x100 mm - Sand cast iron S&S as per IS - 1729 |
| 128 | Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. (i) 100x100x100 mm - Sand cast iron S&S as per IS - 1729 |
| 129 | Providing and fixing collar: (i) 100 mm - Sand cast iron S&S as per IS - 1729 |
| 130 | Providing and fixing sand cast iron S&S offsets as per IS: 1729 (i) 152 mm offsets - With 100 mm dia. Pipe |
| 131 | Providing and fixing terminal guard: (i) 100 mm - Sand cast iron S&S as per IS - 1729 |
| 132 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter: |
| 133 | (i) 100mm |
| 134 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors: (i) 100 mm inlet and 100 mm outlet - Sand Cast Iron S&S as per IS: 1729. |
| 135 | Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size ) including necessary plaster and pointing in cement mortar 1:4(1cement: 4 coarse sand): |
| 136 | (i) 100 mm dia. |
| 137 | SUB-HEAD : WATER SUPPLY |
| 138 | Providing and fixing G.I. pipes of medim class as per IS : 1239 with latest amendment complete with G.I. fittings and clamps, including cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer - in - charge. Internal work - Exposed on wall. |
| 139 | (i) 15 mm dia. nominal bore |
| 140 | (ii) 20 mm dia. nominal bore |
| 141 | (iii) 40 mm dia. nominal bore |
| 142 | Making connection of G.I. distribution branch with G.I. main following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete as per CPWD specification and direction of the Engineer - in - charge. |
| 143 | (i) 25 to 40 mm nominal bore |
| 144 | Providing and fixing brass bib cock of approved quality : |
| 145 | (i) 15 mm nominal bore |
| 146 | Providing and fixing brass stop cock of approved quality : |
| 147 | (i) 15 mm dia nominal bore |
| 148 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): |
| 149 | (i) 25 mm nominal bore |
| 150 | (ii) 40 mm nominal bore |
| 151 | Providing and fixing gun metal non-return valve of approved quality (screwed end): (i) 40 mm nominal bore - Vertical |
| 152 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 153 | Constructing masonryChamber 30x30x50 cm, insidewith 75 class designation brick work incement mortar1:5 (1 cement :5 fine sand) forstopcock, withC.I.surface box100x100x75mm (inside)with hingedcover fixedincement concreteslab1:2:4mix (1 cement:2 coarsesand:4gradedstoneaggregate20mmnominalsize) necessary excavation foundationconcrete 1:5:10 ( 1cement :5fine sand:10gradedstoneaggregate40mmnominalsize)andinside plastering with cement mortar 1:3 (1 cement :3 coarsesand) 12mm thick finishedwithafloatingcoatofneatcementcompleteasper standard design : |
| 154 | (i) With Second Class bricks |
| 155 | Painting G.I. pipes and fittings with synthetic enamel white paint overa ready mixed priming coat, both of approved quality for new work : |
| 156 | (i) 15 mm diameter pipe. |
| 157 | (ii) 20 mm diameter pipe. |
| 158 | (iii)25 mm diameter pipe. |
| 159 | (iv) 40 mm diameter pipe. |
| 160 | Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : |
| 161 | (i) 40 mm diameter pipe |
| 162 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete as per CPWD specification and direction of the Engineer - in - charge.(New work) |
| 163 | (i) 40 mm nominal bore. |
| 164 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet: |
| 165 | (i) 100 mm diameter |
| 166 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements weighing not less than 106 gms. |
| 167 | SUB-HEAD : SEWAGE & DRAINAGE |
| 168 | Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the of 1:1 (1 cement: 1 fine sand) including testing of joints etc. complete : |
| 169 | (i) 150 mm diameter |
| 170 | Providing and laying cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) alround S.W. pipes including bed concrete as per standard design: |
| 171 | (i) 150 mm diameter S.W, pipe |
| 172 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with well burnt 2nd class bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. |
| 173 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with 1st class bricks in cement mortar 1:4 (1 cement : 4 fine sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 fine sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement: 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 fine sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : |
| 174 | (i) Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets : |
| 175 | SUB-HEAD : INTERNAL ELECTRIFICATION WORKS CONDUIT & ACCESSORIES |
| 176 | Supplying and fixing of the following sizes PVC conduit (medium gauge) on surface with all accessories etc. as required.(As per TSR 2021, Sl- 101) i) 19/20 mm dia |
| 177 | ii) 25 mmdia |
| 178 | Supplying and fixing of the following electrical accessories including necessary connection etc. as required.( As per TSR 2021 SL. No- 604) |
| 179 | (i) 5/6 amps piano type switch |
| 180 | (ii) Ceiling rose |
| 181 | (iii) Ding dong call bell |
| 182 | (iv) Gong bell |
| 183 | (v) 16/20 amps piano type switch |
| 184 | (vi) 5/6 amps piano type call bell push |
| 185 | (vii) 3 pin 5/6 amps piano type socket |
| 186 | (viii) 3/6 pin 16/20 amps piano type socket |
| 187 | (ix) Electronic 5 step fan regulator |
| 188 | (x) Angle/batten holder |
| 189 | (xi) 3mm thick bakelite sheet |
| 190 | (xii) 32 amps DP kit kat switch:- |
| 191 | CIRCUIT /SUB-MAIN & CABLES |
| 192 | Wiring for Circuit/Sub-main with the following sizes PVC insulated Copper conductor cable (FR) in PVC conduit (medium gauge) recessed in slab/ wall etc. as required:- (As per TSR 20121 Sl- 405) |
| 193 | (i) 2 X 1.5 + 1 X 1.5 sq mm |
| 194 | (ii) 2 X 2.5 + 1 X 1.5 sq mm |
| 195 | (iii) 2 X 4 + 1 X 1.5 sq mm |
| 196 | (iv) 4 X 6+ 2 X 2.5 sq mm |
| 197 | (v) 4 X 10+ 2 X 4 sq mm |
| 198 | Supplying and laying of the following sizes XLPE insulated PVC sheathed aluminium conductor armoured cable with necessary connection etc as required (As per TSR 2021, Sl- 1301) i) 3 core 4 sq.mm |
| 199 | Drawing of armoured/un-armoured cable with proper saddling etc as required:-:-(As per TSR 2021 Item no-1511) |
| 200 | Supplyingandfixingoffollowing copper terminal ends (LUGS) long barrel of following sizes: (As per TSR 2021, Sl- 1402) |
| 201 | i) 4 sq mm |
| 202 | ii) 6 sq mm |
| 203 | EARTHING |
| 204 | Providingearthing systemwith maintenance free earthing electrode of 50 mm dia & 3 mtr long of dual electrode technology filled with highly conductive compound and back fill compound of 2 nos. 25 kg bag, terminalsize 32mmx 6mm including accessories with masonry enclosure of CIcover plate size 12"x 12" having locking arrangement including CC works etc as required:-(As per TSR 2021, Sl- 717) |
| 205 | Supply and fixing of 25mm x 5mm GI strip on wall/ floor of the building for horizontal/ vertical run including necessary spacers and porcelain insulators at regular intervals.(As per TSR 2021, Sl- 712) |
| 206 | Proving and fixing / drawing of 4.06 mm dia (8 SWG) G.I. wire on surface or in existing G.I/ PVC/ Polythene pipe for loop earthing as required. (As per TSR 2021, Sl- 706) |
| 207 | FAN |
| 208 | Supplying & fixing of 1200 mm sweep white color AC ceilingfan capacitor typedouble ball bearing complete with 300 mm down rod,canopies,shackles, 3nos blades, including wiring the down rod with 2x1.5 sqmm PVC insulated Copper conductor cable(FR)(ISI marked, BEE 1star/minimum service value 4.0 m3/min/W) : --(As per TSR 2021, Sl- 802) |
| 209 | Supplying & installation of 300 mm sweep 900 rpm metalic body exhaust fan including connection etc as required (ISI marked) :--(As per TSR 2021, Sl- 818) |
| 210 | Supplying & installation of shutter for 225/230/300 mm sweep metalic body exhaust fan in the existing hole as required:--(As per TSR 2021, Sl- 821) |
| 211 | LUMINARIES AND OUTDOOR |
| 212 | Supplying and fixing of following surface/recess mounted LED luminaries in powder coated die cast housing complete with high efficiency polycarbonate diffuser and necessary connection etc.as required (with 50000 burning hours and minimum lumen output of 100 lm/watt):-(As per TSR 2021, Sl- 1101) i)Surface mounted integrated 20 watt LED batten with polycarbonate diffuser:- |
| 213 | Supplying and fixing of following LED Tubes, retrofit bulbs/lamps for LED luminaries including necessary connection etc. as required:-(As per TSR 2021, Sl- 1103) i) 9 watt LED retrofit lamp with polycarbonate body and aluminium heatsink :- |
| 214 | Supplying and fixing of following outdoor LED luminaries in powder coated die cast housing complete with heat resistant tempered glass/diffuser including necessary connection etc. as required (50000 burning hours and minimum lumen output of 100 lm/watt):-As per TSR 2021, Sl- 1102) i) 45 watt LED street light fixture with integral driver and secondary lens (IP 66):- |
| 215 | Supplying & fixing of 25 mm dia G.I. pipe (medium gauge) bracket fabricated at suitable angle for fixing of outdoor light on wall/ RCC base with necessary MS clamp, nut, bolt etc as required:-(As per TSR 2021 Item no-1501) |
| 216 | Supplying and fixing of following luminaries complete withnecessary accessories and connection etc. as required (Commercial lighting fixtures with 50,000 burning hours):- (As per TSR 2021 Item no-1001) i) Decorative wall mounting fancy bracket light fixture suitable for GLS or retrofit CFL/LED (without lamp) : - |
| 217 | SWITCHGEAR |
| 218 | Supplying and fixing of MS frame made of (25mm x 25mm x 5mm) MS angle with necessary support by (40mm x 6mm) MS flat and 12 mm thick marine plywood on top, grouted on wall with 4 noslegs (25mmx25mmx5mm MS angle20 cm long) finishedwith red oxide and 2 coat synthetic enamel paintincluding necessary cc work, mending the damages & painting etc as required:-(As per TSR 2021, Sl- 1502) |
| 219 | Supplying and installation of Switch disconnector fuse unit (main switch) of the following ratings with all accessories including necessary connection etc. as required:- (As per TSR 2021, Sl- 1202) i) 63 amps 415 volts TPN main switch (rewireable):- |
| 220 | ii) 100 amps 415 volts TPN main switch (rewireable):- |
| 221 | Supplying and installation of Bus bar chamber of the following ratings and sizes made of steel sheet enclosure with all accessories including necessary connection etc. as required:-(As per TSR 2021, Sl- 1201) i) 63 amps 415 volts four strip Copper busbar chamber 4 ways of size (330mm x 280mm x 100mm):- |
| 222 | ii) 100 amps 415 volts four strip Copper busbar chamber 4 ways of size (455mmx330mmx120mm):- |
| 223 | Supplying and installation of powder coated steel sheet enclosure (MCB DB) suitable for 240/415 volts MCB/Isolator/RCCB (SP/SPN/DP/TP/TPN/FP) complete with necessary bus bar, neutral link, din rail, earth bar etc i/c connectionas required.(As per TSR 2021, Sl- 1208) |
| 224 | i) (2+6) / 8way SPN MCB DB (single door):- |
| 225 | ii) (2+10) / 12way SPN MCB DB (single door):- |
| 226 | Supplying & installation of 10 KA breaking capacity, B/C curve MCB of following ratings in the existing MCB DB including connectionas required:-(As per TSR 2021, Sl- 1215) i) 6 to 32 amps SP MCB:- |
| 227 | Supplying & installation of isolators of following ratings in the existing MCB DB including connection etc as required:-(As per TSR 2021, Sl- 1217) i) 40 amps DP isolator:- |
| 228 | MISCELLANEOUS |
| 229 | Supplyingandinstallationof secure zone 4 kg ABCpowder fire Extinguisher gross weight 6.38 kg, empty weight 2.38 kg, can height 372 mm, diameter 150 mm, discharge time minimum 13 seconds , discharge mechanism - squeeze grip type range minimum 2 meters applicable on class A,B,C and electrically started fire, A rating- 2A, raring-55B, can contrast- mig welded,valve construction- forging & machining, external coating of can..epoxy polyester powder coating, sheet metal thickness. 1.60mm, conforms to BIS standards, 5 years warranty(make. ceasefire/secure/fireshield) (Rateasperagreement no 74/EE/IED/AMB/2020-21):- |
| 230 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering,shuttering, finishing and reinforcement- - All work upto plinth level (i) 1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brick aggregate 20 mm nominal size):-(As per TSR 2017, Sl- 1313) |
| 231 | Supplying & installation of Digital timer Switch including necessary connection etc as required:-:-(As per TSR 2021, Sl- 1512) |
| 232 | Supplying & installation of following power contactors including necessary connection etc as required:-(As per TSR 2021, Sl- 1514) i) 3 pole 9 amps (AC3)power contactors with 1NO+1NC Aux. Contact. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
